STM8S105K4U6A - 16MHz 8-Bit MCU | STMicroelectronics
MPN: STM8S105K4U6A ✓ 啟用中STM8S105K4U6A 概覽
An 8-bit microcontroller is a compact embedded-processing device designed to execute firmware, monitor inputs, control outputs, and manage system interfaces. Within the product hierarchy, the STM8S105K4U6A belongs to the STM8S family, STM8 access-line microcontrollers, and the broader category of 8-bit MCU semiconductor devices. The STM8S105x4 and STM8S105x6 access lines cover configurations with 16 KB or 32 KB of Flash memory and provide integrated true EEPROM for parameter storage.
The principal features of this device are its 16 MHz maximum operating frequency, 16 KB Flash memory, 10-bit ADC, integrated EEPROM, and extensive serial-interface support. The 5 mm by 5 mm UFQFPN package supports compact PCB layouts where a smaller land pattern is important. Its operating voltage range supports both 3.3 V and 5 V system designs, according to the manufacturer product information.
The STM8S105K4U6A uses the STM8 8-bit CISC architecture and belongs to the STM8S medium-density device group identified in reference manual RM0016. Its mixed-signal and communications resources allow one controller to handle analog measurement, timing functions, serial data exchange, and embedded control without requiring separate interface ICs for every function.
Typical applications include compact sensor transmitters, appliance controls, small motor controllers, industrial monitoring modules, digital panel controls, and low-cost communication equipment. The combination of ADC, EEPROM, UART, SPI, and I2C is particularly useful in designs that acquire analog measurements, retain configuration data, and communicate with sensors, actuators, or host systems.
PCB design should follow the manufacturer's pin and land-pattern guidance, provide the required decoupling close to the supply pins, and route exposed-pad connections according to the package thermal design. Firmware and peripheral configuration should be checked against RM0016 and the STM8S105x4/6 device documentation to avoid errors involving alternate functions, timers, ADC channels, or communication interfaces.
This page consolidates the exact orderable MPN, core memory and frequency details, interface capabilities, sourcing information, application guidance, and practical comparison considerations into a focused engineering reference for designers evaluating the STM8S105K4U6A.
直接替換替代品,適用於 STM8S105K4U6A — 相同封裝,腳位對腳位相容。需重新設計 PCB 的不同封裝零件不列入。
STM8S105K4U6
✅ 直接替換📋 參考替代品(不在目錄中)
STM8S105K4U6A 最大額定值與電氣特性
| Product Type | 8-bit microcontroller |
| Product Series | STM8S105x4/6 access line |
| Maximum CPU Frequency | 16 MHz |
| Flash Program Memory | 16 KB (16K x 8 bits) |
| ADC Resolution | 10 bits |
| UART Interface | Present |
| SPI Interface | Present |
| I2C Interface | Present |
| Timer Resources | General-purpose timers |
| Architecture | 8-bit CISC |
| Device Classification | Medium-density STM8S device |
| 供應電壓 | 3.3 V or 5 V |
| 封裝 | 32-pin UFQFPN |
| Package Dimensions | 5 mm x 5 mm |
| 安裝類型 | Surface mount |
STM8S105K4U6A 5 mm x 5 mm 腳位配置指南
STM8S105K4U6A(5 mm x 5 mm 封裝)的腳位配置。 此數位 IC 包含 GPIO、通訊介面(UART、SPI、I2C)與電源腳位。替代腳位功能與配置選項請參閱製造商資料表。對嵌入式系統設計與 PCB 佈局至關重要。
無詳細腳位定義資料: STM8S105K4U6A.
請參閱 資料表 以查看完整腳位配置。
典型應用
STM8S105K4U6A 適用於 6 應用s: Industrial Sensor Monitoring, Smart Appliance Control, Low-Cost Communication Module, Compact Motor Controller, Digital Control Panel, Portable Instrumentation.
Industrial Sensor Monitoring
The STM8S105K4U6A fits compact industrial monitoring modules because its 10-bit ADC can acquire analog process signals while the 16 MHz 8-bit core handles sampling, filtering, thresholding, and local control functions. Integrated true EEPROM supports retention of calibration constants, sensor offsets, and configuration records without adding an external memory component. UART, SPI, and I2C provide flexible links to transducers, local sensors, and supervisory electronics. The 32-pin UFQFPN package measuring 5 mm by 5 mm keeps the controller footprint compact, while a 3.3 V or 5 V design basis supports both industrial instrument architectures. Firmware should use the manufacturer pin table and RM0016 when assigning ADC channels and alternate-function pins.
推薦
Smart Appliance Control
The STM8S105K4U6A is appropriate for compact appliance controllers that must coordinate user inputs, motors, relays, heaters, and status indicators. Its 16 MHz operating speed supports responsive control logic, while general-purpose timers help generate accurate switching intervals, debounce windows, and motor-control timing. The 10-bit ADC can monitor temperature, potentiometer position, or supply voltage, and the serial interfaces can connect a display, keypad, sensor module, or communications daughterboard. The 16 KB Flash provides dedicated space for application firmware, while integrated EEPROM can preserve settings. A 5 mm by 5 mm UFQFPN footprint helps reduce board area in space-sensitive household and commercial equipment.
推薦
Low-Cost Communication Module
The STM8S105K4U6A can serve as the control core in a compact UART, SPI, or I2C communication module. Its 16 MHz 8-bit processor can manage framing, buffering, status reporting, and configuration while the three serial interfaces support local sensor and transceiver connections. Sixteen kilobytes of Flash accommodates protocol firmware, and true EEPROM can hold addresses, calibration data, and network parameters. The device operates in 3.3 V or 5 V systems, allowing integration into compact industrial, building-control, or embedded communication products. Designers should check alternate-function assignments for the selected serial peripheral in the manufacturer pin description before fixing the PCB layout.
推薦
Compact Motor Controller
The STM8S105K4U6A is suitable for small motor and actuator controllers where deterministic timing, analog feedback, and compact packaging matter. General-purpose timers support motor-drive timing functions, while the 10-bit ADC can sample potentiometer commands, current-related signals, or temperature. UART and I2C allow tuning data and operating status to be exchanged with a host or companion controller, and EEPROM can preserve calibration after power loss. The 32-pin UFQFPN footprint reduces the controller area, although the final design must follow the package thermal-land and pin definitions exactly. The 3.3 V or 5 V operating basis provides flexibility for battery-oriented and conventional industrial control products.
推薦
Digital Control Panel
The STM8S105K4U6A supports compact digital control panels that combine keypad input, LED indication, analog setpoint adjustment, and serial communication. Its 16 MHz processing speed supports responsive debouncing, menu logic, status updates, and fault handling, while the 10-bit ADC can read potentiometers or resistive sensors. Integrated EEPROM preserves user settings and calibration values across power cycles, and UART, SPI, or I2C can connect a local display or communications module. The 5 mm by 5 mm UFQFPN package is useful when the control electronics must fit behind a small membrane-key front panel. Alternate-function and pin-direction decisions should be verified against the STM8S105x4/6 documentation.
推薦
Portable Instrumentation
The STM8S105K4U6A fits portable measurement instruments where low power, compact packaging, and local data retention are important. The 10-bit ADC serves the primary analog-input function, the 16 MHz core executes measurement sequencing and calculations, and true EEPROM can store instrument settings, calibration coefficients, and counters. UART or I2C can connect a host computer or wireless module, while SPI can support higher-speed local data transfer. A 3.3 V supply basis is useful for portable battery-powered equipment, and the compact 32-pin UFQFPN leaves more board area for sensing and power-management circuitry. Power-consumption measurements should be taken with the final firmware and peripheral configuration in the manufacturer characterization conditions.
推薦
推薦產品摘要
工程參考資料,適用於 STM8S105K4U6A — 比較、設計指引及合規資訊。
選型指南
與替代品比較
| 參數 | 本產品 | STM8S105K4U6 |
|---|---|---|
| Package | 32-UFQFPN (5x5 mm) | 32-UFQFPN (5x5 mm) |
| Brand | STMicroelectronics | STMicroelectronics |
| Product Type | 8-bit microcontroller | 8-bit microcontroller |
| Maximum CPU Frequency | 16 MHz | 16 MHz |
| Flash Program Memory | 16 KB | 16 KB |
| ADC Resolution | 10 bits | 10 bits |
| Integrated EEPROM | Present | Present |
| Serial Interfaces | UART, SPI, and I2C | UART, SPI, and I2C |
| Supply Voltage | 3.3 V or 5 V | 3.3 V or 5 V |
主要差異化特點
- Combines several embedded-control resources in one 8-bit device (對比STM8S105K4U6)
- Compact package for space-constrained control boards (對比STM8S105K4U6)
- Integrated true data EEPROM reduces external storage overhead (對比STM8S105K4U6)
設計說明
Implement the STM8S105K4U6A footprint from the manufacturer 32-pin UFQFPN package drawing rather than inferring it from a generic QFN-32 symbol. Confirm exposed-pad dimensions, pin numbering, pin-1 orientation, land width, and paste pattern. The 5 mm by 5 mm footprint is compact enough that routing errors around adjacent pins can be difficult to correct, so compare the PCB library against the package drawing before releasing artwork.
Place the required supply-decoupling capacitors close to the MCU supply pins and keep the return path short. Select capacitors and the regulator for stable operation across the device's intended 3.3 V or 5 V rail. Review the datasheet's power-up, reset, and operating-current conditions against the final firmware, because ADC, timers, and serial interfaces can change current consumption and startup behavior.
Assign UART, SPI, I2C, timer outputs, and ADC channels only after checking the STM8S105K4U6A alternate-function matrix. Several peripheral signals can be mapped to multiple pins, so a schematic change can force PCB routing changes. Keep analog inputs away from switching nodes and high-current return paths, and route exposed-pad thermal connections to the appropriate ground plane without introducing unintended copper slots.
Do not substitute an STM8A-family controller solely because it also has 16 KB Flash and a 32-pin VFQFPN package. Pin multiplexing, clock requirements, interrupt mapping, timer channels, and peripheral resources can differ between families. When replacing STM8S105K4U6A, compare the complete pin table, electrical limits, memory organization, startup sequence, and firmware dependencies; a package match alone does not guarantee drop-in behavior.
合規資訊
No explicit RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals statement was identified in the cited product and distributor results.