Microchip Technology

SY88903VKC - 1.25Gbps Limiting Postamp | Microchip

MPN: SY88903VKC ✓ 啟用中
3.3 V or 5 V Vdss 10-MSOP Package
MOQ: 1 |

SY88903VKC 概覽

The Microchip Technology SY88903VKC is a 1.25 Gbps high-speed limiting postamplifier for optical-network receivers, operating from a single 3.3 V or 5 V supply in a 10-MSOP surface-mount package. The device accepts differential PECL data inputs and provides TTL-compatible signal conditioning following a transimpedance amplifier. It also includes an open-collector TTL loss-of-signal output, chatter-free LOS generation, and a TTL enable input for receiver control.

A limiting postamplifier is a specialized amplifier IC that converts the variable-amplitude output of a photodiode receiver’s transimpedance amplifier into a stable digital data stream. Its place in the optical signal chain is typically photodiode, transimpedance amplifier, limiting postamplifier, then clock and data recovery circuitry. By removing amplitude variation and excess noise after the analog front end, this device helps produce clean, repeatable logic-level data for 1.25 Gbps optical links.

The principal features of the SY88903VKC are its support for 3.3 V and 5 V operation, data rates up to 1.25 Gbps, differential PECL inputs, TTL-compatible outputs, and a single-supply architecture. The open-collector LOS output can interface with external pull-up circuitry, while the TTL enable input allows the receiver path to be disabled when it is not required. These functions suit optical transceiver modules, PON equipment, Ethernet/SONET-class receiver interfaces, and other high-speed fiber-optic links.

The SY88903V family uses limiting amplification to reconstruct digital transitions from a degraded analog waveform. When connected to a typical transimpedance amplifier, the postamplifier rejects amplitude noise and produces a repeatable output level. Differential input handling supports a common high-speed receiver architecture, and the low-noise limiting stage is intended to preserve signal integrity in links operating as fast as 1.25 Gbps. Exact rise-time, jitter, input-sensitivity, and current-consumption limits should be confirmed against the manufacturer datasheet before release.

Typical implementations place the SY88903VKC after a transimpedance amplifier in an optical receiver module. It is also appropriate for equipment requiring loss-of-signal detection, including PON transceivers, optical network terminals, line terminals, and high-speed data-link modules. Because the device uses TTL and PECL interface conventions, it can simplify logic connections where the surrounding transceiver circuitry already supports those levels.

For PCB design, treat the PECL input and output traces as high-speed signal paths, use a continuous reference plane, and place termination and decoupling components close to their associated pins. Confirm pull-up requirements for the open-collector LOS output and provide clean supply bypassing for both 3.3 V and 5 V designs. Review the datasheet pin description and recommended application circuit before assigning tracks or selecting external components.

This product page combines the SY88903V manufacturer datasheet information with application guidance, interface considerations, and verified replacement research. It focuses on practical use of the 1.25 Gbps limiting postamplifier in optical receivers while clearly separating electrical details that require direct confirmation from the manufacturer documentation.

直接替換替代品,適用於 SY88903VKC — 相同封裝,腳位對腳位相容。需重新設計 PCB 的不同封裝零件不列入。

此產品無可直接替換的替代品。

申請替代品

SY88903VKC 最大額定值與電氣特性

Product Type High-speed limiting postamplifier
Maximum Data Rate 1.25 Gbps
Supply Voltage Options 3.3 V or 5 V
Input Interface Differential PECL
Output Interface TTL-compatible
Loss-of-Signal Output Open-collector TTL
Enable Input TTL
Supply Architecture Single supply
封裝 10-MSOP
安裝類型 Surface mount
Lead Pitch 0.118 in (3.00 mm)
Optical Application High-frequency fiber-optic receiver

SY88903VKC 10-msop 腳位配置指南

SY88903VKC(10-msop 封裝)的腳位配置。 此類比元件具有輸入、輸出與電源腳位。偏移歸零、補償與致能腳位配置請參閱製造商資料表。適用於訊號調理與放大器電路。

SY88903VKC 的 10-msop 封裝腳位圖

無詳細腳位定義資料: SY88903VKC.

請參閱 資料表 以查看完整腳位配置。

典型應用

SY88903VKC 適用於 6 應用s: PON Optical Receiver Modules, 1.25 Gbps Ethernet Receiver Interfaces, SONET-Class Optical Line Interfaces, Optical Network Terminals, Optical Line Terminals, High-Speed Fiber-Link Test Equipment.

🌐

PON Optical Receiver Modules

The SY88903VKC fits a passive-optical-network receiver path where a transimpedance amplifier produces a noisy, variable-amplitude waveform that must be restored to a usable digital stream. Positioned after the analog front end, the device limits that waveform at rates up to 1.25 Gbps and provides differential PECL inputs for high-speed reception. Its open-collector TTL loss-of-signal output and TTL enable input also support receiver-state supervision and controlled shutdown. The 10-MSOP package keeps the postamplifier compact enough for dense line-card and transceiver layouts.

🌐

1.25 Gbps Ethernet Receiver Interfaces

The SY88903VKC can provide the limiting stage in a 1.25 Gbps optical receiver designed for legacy Fast Ethernet or comparable fiber links. Its differential PECL input arrangement accommodates the output of a suitable transimpedance amplifier, while the limiting action converts amplitude variation into repeatable logic transitions. At the maximum supported data rate, layout quality, termination, supply bypassing, and clock recovery remain critical. The single 3.3 V or 5 V supply flexibility supports both legacy and newer transceiver board architectures.

🌐

SONET-Class Optical Line Interfaces

The SY88903VKC is applicable to receiver signal conditioning in optical transport equipment operating within its 1.25 Gbps capability. In this arrangement, the device follows a photodiode transimpedance stage and converts the recovered analog signal into a clean digital output for subsequent clock-and-data recovery or framing circuitry. Differential PECL signaling supports a conventional high-speed board environment, while the loss-of-signal output provides a receiver-health indication to system supervision logic. Designers should confirm timing margins and loss-of-signal thresholds against their line-card requirements.

🏭

Optical Network Terminals

In an optical network terminal, the SY88903VKC can serve as the postamplifier immediately downstream of the receive-side transimpedance amplifier. Its 1.25 Gbps limit matches the operating class identified in the manufacturer documentation, while the limiting function reduces the effect of analog noise and slow amplitude changes before data recovery. The TTL enable input allows power-management logic to control the receive path, and the open-collector loss-of-signal indication can be monitored by the terminal’s supervisory controller.

🏭

Optical Line Terminals

The SY88903VKC supports the receive datapath of an optical line terminal requiring a compact limiting stage after the analog front end. A 10-MSOP surface-mount package simplifies board-area allocation while differential PECL inputs promote robust high-speed routing. The device’s ability to operate from a single 3.3 V or 5 V rail allows integration into systems with different interface-rail conventions. Loss-of-signal reporting and enable control are valuable in field-maintainable line equipment, although current thresholds and timing behavior must be verified for each optical specification.

🔧

High-Speed Fiber-Link Test Equipment

The SY88903VKC can be used in laboratory or diagnostic equipment that needs to reconstruct a digital signal from a fiber receiver’s analog output. Its limiting action is useful when a noisy photodiode-chain waveform must become repeatable before measurement or analysis. The differential PECL input accepts the receiver-chain output, and the open-collector TTL loss-of-signal signal provides an additional status indication for automated test systems. For instrumentation applications, check jitter, sensitivity, and timing specifications directly in the manufacturer datasheet before setting measurement thresholds.

What is the SY88903VKC?
The SY88903VKC is a single-channel, high-speed limiting postamplifier rated for data rates up to 1.25 Gbps in a 10-MSOP package. According to the Microchip Technology SY88903V datasheet, it accepts differential PECL inputs following a fiber-optic transimpedance amplifier and includes TTL-compatible outputs, an open-collector loss-of-signal output, and a TTL enable input.
What supply voltage does the SY88903VKC require?
The SY88903VKC supports both 3.3 V and 5 V single-supply operation up to 1.25 Gbps. The manufacturer datasheet identifies the 3.3 V and 5 V options as separate operating configurations. Use the datasheet’s recommended decoupling and application circuit for the selected rail, and verify signal-level compatibility before connecting PECL inputs or TTL-compatible outputs.
Where can I download the SY88903VKC datasheet PDF?
The official SY88903V datasheet PDF is available from Microchip Technology at https://ww1.microchip.com/downloads/aemDocuments/documents/OTH/ProductDocuments/DataSheets/sy88903v.pdf. It contains the recommended application circuit, electrical characteristics, pin descriptions, timing information, and interface details needed for a 3.3 V or 5 V optical-receiver design.
Where is the SY88903VKC pinout?
The SY88903VKC pinout is shown in the pin-description section of the official Microchip Technology SY88903V datasheet. The device uses a 10-MSOP package with differential PECL data inputs, TTL-compatible outputs, a TTL enable input, an open-collector loss-of-signal output, supply pins, and ground pins. Use the datasheet table when assigning PCB tracks because exposed and no-connect details must not be inferred from the package outline.
Is the SY88903VKC suitable for 1.25 Gbps optical networks?
Yes, the SY88903VKC is specifically designed for high-speed fiber-optic links operating up to 1.25 Gbps. Its intended signal path places the device after a transimpedance amplifier, where it limits a noisy, variable-amplitude analog waveform and converts it into a stable digital output. Differential PECL inputs and TTL-compatible outputs make it appropriate for optical network transceiver signal conditioning.
What is the difference between SY88903VKC and SY88903VKC-TR?
SY88903VKC and SY88903VKC-TR identify the same Microchip Technology SY88903V limiting postamplifier in different ordering forms. The TR suffix denotes the tape-and-reel ordering option, while the electrical device is the 1.25 Gbps, differential PECL-input limiting postamplifier in a 10-MSOP package. Confirm reel orientation, quantity, and exposed-terminal handling against the manufacturer ordering information.
When should I choose the SY88903VKC for an optical receiver?
Choose the SY88903VKC when a fiber-optic receiver needs a dedicated stage for limiting and reshaping a transimpedance amplifier’s output at rates up to 1.25 Gbps. It is especially useful when the design needs differential PECL inputs, TTL-compatible logic outputs, a TTL enable function, or open-collector loss-of-signal detection. It is not intended as the photodiode’s transimpedance amplifier itself.
Is the SY88903VKC the same as a general-purpose amplifier?
No, the SY88903VKC is a specialized limiting postamplifier rather than a general-purpose analog amplifier. The Microchip Technology SY88903V datasheet describes it as an integrated limiting amplifier for high-frequency fiber-optic applications. Its differential PECL inputs, single 3.3 V or 5 V supply, TTL enable input, and open-collector TTL loss-of-signal output are tailored to optical receiver data paths.
What can replace the SY88903VKC?
The directly documented ordering alternative is SY88903VKC-TR, which uses the same SY88903V electrical design in a tape-and-reel format and the same 10-MSOP package. No independently verified cross-manufacturer, pin-compatible replacement was identified in the available cross-reference research. Before substituting another postamplifier, confirm pin assignments, supply voltage, input logic levels, data rate, jitter, and loss-of-signal behavior.
What is the best Microchip Technology equivalent for SY88903VKC?
The Microchip Technology SY88903VKC-TR is the closest documented ordering equivalent because it denotes the same SY88903V device supplied in tape-and-reel format. Both use a 10-MSOP package and provide the same 1.25 Gbps limiting-postamplifier function with differential PECL inputs and TTL-compatible outputs. For a non-reel assembly, use SY88903VKC; for reel-based production, use SY88903VKC-TR.
How do I connect the SY88903VKC loss-of-signal output?
Connect the SY88903VKC loss-of-signal function to the required external pull-up because the output is open collector, then route the resulting TTL-compatible signal to the receiver controller or alarm logic. The manufacturer datasheet identifies chatter-free LOS generation as a device feature. Follow its recommended network and logic-level details to avoid excessive capacitive loading or incompatible input thresholds.
What layout practices are important for the SY88903VKC?
Place power-decoupling components and any input or output termination close to the SY88903VKC pins, and route the differential PECL path over a continuous reference plane. Keep the postamplifier close enough to the transimpedance amplifier to minimize high-frequency loss and exposed-coupling risk. Follow the manufacturer application circuit for component values and terminations because the 1.25 Gbps signal path is sensitive to impedance discontinuities.
Does the SY88903VKC need an external transimpedance amplifier?
Yes, the SY88903VKC is intended to operate after a transimpedance amplifier in a fiber-optic receiver. The manufacturer describes the transimpedance amplifier as producing a linear signal that may contain noise and amplitude variation, while the SY88903V quantizes that signal and creates a stable limiting-amplifier output. The complete receiver still requires the photodiode and analog front end upstream.
Is the SY88903VKC compliant with RoHS and REACH?
RoHS and REACH status cannot be confirmed from the manufacturer page information available for this product entry, so no compliance claim should be made without current supporting documentation. For a released optical-network design, request the latest manufacturer material declaration or product-compliance record. The device’s regulated operating temperature and automotive qualification status should likewise be checked separately.
Where can I request a quote and current lead time for SY88903VKC?
Use the “Request a Quote” form on this page for current SY88903VKC quotation, availability, and lead-time information. Quote requests are handled through XAIPART’s own supply channel and can include the required 10-MSOP ordering option. Current sourcing status can change, so confirm quantity, delivery schedule, and reel requirements when submitting the request.

工程參考資料,適用於 SY88903VKC — 比較、設計指引及合規資訊。

選型指南

Choose the SY88903VKC when a fiber-optic receiver needs a dedicated 1.25 Gbps limiting stage after a transimpedance amplifier. Its differential PECL inputs, TTL-compatible outputs, open-collector LOS indication, and TTL enable control are a strong match for compact optical transceiver modules, PON terminals, and optical network equipment. Use the 3.3 V configuration for systems with a 3.3 V interface environment and the 5 V configuration where the receiver board’s power architecture requires it. SY88903VKC-TR is the documented tape-and-reel ordering option for automated assembly, while SY88903VKC is the non-TR ordering form. Before choosing another manufacturer’s postamplifier, require proof of package and pin compatibility, equivalent input sensitivity, acceptable jitter, matching loss-of-signal behavior, and operation at the full 1.25 Gbps data rate.

與替代品比較

參數 本產品
Product Type High-speed limiting postamplifier
Brand Microchip Technology
Package 10-MSOP
Maximum Data Rate 1.25 Gbps
Supply Voltage 3.3 V or 5 V
Input Interface Differential PECL
Output Interface TTL-compatible
Loss-of-Signal Output Open-collector TTL
Enable Input TTL
Mounting Type Surface mount

主要差異化特點

  • Integrated optical-receiver control functions (對比General-purpose PECL buffer)
  • Flexible single-supply operation (對比5 V-only limiting postamplifier)
  • Compact surface-mount implementation (對比Larger through-hole optical receiver package)

設計說明

Route the differential PECL input as a short, continuous high-speed channel over an uninterrupted reference plane. Place termination, decoupling, and any output-isolation components close to the relevant device pins. Avoid adding test pads or long stubs to the 1.25 Gbps path because parasitic inductance and capacitance can degrade edge quality and timing margins.

Do not treat the SY88903VKC as the photodiode transimpedance stage; the intended architecture places it after a suitable amplifier. Also, do not assume the open-collector loss-of-signal output can drive a logic input without the pull-up network shown in the manufacturer application circuit. Confirm enable polarity and TTL thresholds before connecting supervisory logic.

Use the manufacturer’s recommended single 3.3 V or 5 V supply arrangement and place the supply bypass capacitor close to the corresponding power and ground pins. Keep the switching return current in the device ground reference rather than passing it through signal-routing areas. A clean, locally decoupled supply is particularly important because the limiting stage follows the sensitive receiver analog front end.

Validate the complete receiver chain rather than only the postamplifier. Confirm the transimpedance amplifier’s amplitude, slew rate, jitter, and noise behavior against the SY88903V input requirements, then evaluate the resulting eye opening with the intended data rate. This prevents a PCB that appears correct at low frequency from failing at the maximum 1.25 Gbps operating rate.

合規資訊

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
無鉛
Unknown
無鹵
Unknown
衝突礦產
Unknown

Compliance declarations and the automotive qualification status require confirmation from current Microchip Technology material-declaration or product-compliance documentation.

相關搜尋

SY88903VKC datasheet SY88903VKC datasheet pdf SY88903VKC pinout SY88903VKC equivalent SY88903VKC replacement SY88903VKC cross reference SY88903VKC price SY88903VKC stock Microchip SY88903VKC SY88903VKC 10-MSOP SY88903VKC 1.25Gbps SY88903VKC optical receiver SY88903VKC vs SY88903VKC-TR

相關元件與詞彙

Microchip Technology SY88903VKC SY88903VKC-TR SY88903V limiting postamplifier limiting amplifier special-purpose amplifier IC amplifier IC integrated circuit semiconductor differential PECL input TTL-compatible output open-collector TTL loss of signal chatter-free LOS TTL enable transimpedance amplifier fiber-optic receiver optical network 1.25 Gbps 3.3 V power supply 5 V power supply 10-MSOP MSOP family surface-mount package SMD
快速報價 RFQ
請填寫完整詳細資料 — 我們的業務團隊將於 24 小時內回覆
料號 製造商 封裝 QTY 目標價格 小計
✓
報價已提交!

我們將於 24 小時內回覆您的電子郵件

1
詢價已提交
2
已收到報價
3
已下單
4
付款
5
已出貨
6
已送達
檢視詢價單詳情