TAS5012PFBR - 2-Channel 3.6V Audio DSP | Texas Instruments
MPN: TAS5012PFBR ✗ 停產TAS5012PFBR 概覽
A true digital audio PWM processor is an audio signal-processing IC that accepts digital audio data and generates PWM signals for power-stage control. The TAS5012PFBR combines digital signal processing, PWM generation, and audio-channel control in one device. This integration reduces the need for separate digital-to-analog and power-driver stages in compatible speaker-amplifier architectures while preserving a digital audio path.
The principal documented features include two-channel processing, DSP and I2S interfaces, a 3 V to 3.6 V supply range, and a 102 dB specification identified by distributor technical listings. The obsolete product status means that new-production suitability is limited, while engineers maintaining legacy consumer or automotive audio equipment may still require a functionally identical replacement. The standard commercial suffix indicates tape-and-reel packaging for surface-mount production.
Technically, the device belongs to the specialized audio-processing hierarchy rather than a conventional power amplifier. Its I2S interface supports digital audio data transfer, while the DSP interface provides the control path for audio processing. The PWM output architecture is intended to work with an external power stage, allowing the signal-processing function and power amplification function to remain separate.
Typical applications include digital speaker systems, multimedia equipment, consumer audio products, and automotive audio head units. For these systems, the TAS5012PFBR can centralize channel processing and digital-to-PWM conversion while reducing discrete control-component count. A successful design must account for the processor's legacy 3 V to 3.6 V operating range, external power-stage requirements, signal timing, and thermal conditions.
Board design should preserve clean separation between digital audio inputs and PWM outputs, route sensitive interfaces away from switching-node connections, and use solid ground and decoupling planes around the 48-pin TQFP footprint. Because the device is obsolete and pin-level electrical details are not reproduced in the available technical summaries, engineers should use the manufacturer datasheet for exact pin assignments, recommended application circuits, timing limits, and PCB-layout values.
This product record combines the device's verified digital-audio identity, package information, operating limits, lifecycle status, source links, and available cross-reference information. It also distinguishes a documented same-brand package-compatible variant from unsupported assumptions, helping engineers evaluate replacements without treating similar audio processors as guaranteed drop-in choices.
直接替換替代品,適用於 TAS5012PFBR — 相同封裝,腳位對腳位相容。需重新設計 PCB 的不同封裝零件不列入。
此系列的變體
與下列產品可直接替換的同系列型號: TAS5012PFBR (相同外形與佔位) — 差異在於 Operating Temperature Range, Package, Packaging, Product Type.
TAS5012IPFBG4
✅ 直接替換📋 參考替代品(不在目錄中)
TAS5012PFBR 最大額定值與電氣特性
| Product Type | True digital audio PWM processor |
| 功能 | Audio signal processor |
| Number of Channels | 2 channels |
| Interfaces | DSP and I2S |
| Supply Voltage Range | 3 V to 3.6 V |
| 工作溫度範圍 | 0 °C to 70 °C (TA) |
| 封裝 | 48-pin TQFP (7 mm × 7 mm) |
| 安裝類型 | Surface mount |
| Packaging | Tape and reel |
| Amplifier Class | Class-AB stereo audio system component |
| Audio Specification | 102 dB |
| Product Status | Obsolete |
| Manufacturer | Texas Instruments |
| Series | TAS501 |
| Application Category | Audio special purpose |
| Primary Application | Automotive audio and consumer audio |
TAS5012PFBR 48-pin tqfp (7 mm × 7 mm) 腳位配置指南
TAS5012PFBR(48-pin tqfp (7 mm × 7 mm) 封裝)的腳位配置。 此類比元件具有輸入、輸出與電源腳位。偏移歸零、補償與致能腳位配置請參閱製造商資料表。適用於訊號調理與放大器電路。
無詳細腳位定義資料: TAS5012PFBR.
請參閱 資料表 以查看完整腳位配置。
典型應用
TAS5012PFBR 適用於 6 應用s: Automotive Audio Head Units, Consumer Multimedia Speakers, Digital Speaker Amplifier Controllers, Home Audio Signal Processing, Portable Audio Products, Industrial Audio Control Systems.
Automotive Audio Head Units
The TAS5012PFBR fits legacy automotive head-unit architectures that use a 3 V to 3.6 V digital audio subsystem and require two-channel PWM signal generation. Its DSP and I2S interfaces allow digital source data to remain in the digital domain before conversion into PWM drive signals for an external power stage. The 48-pin TQFP package provides a high pin count for separate audio and control connectivity. Engineers should verify automotive qualification, operating-temperature requirements, transient tolerance, and electromagnetic-compatibility behavior before using an obsolete device in a new vehicle platform.
推薦
Consumer Multimedia Speakers
TAS5012PFBR is applicable to multimedia speaker products that receive digital audio through an I2S interface and use PWM-controlled amplification. The two-channel architecture supports compact stereo implementations, while the 3 V to 3.6 V supply range suits systems built around low-voltage digital audio logic. The processor generates control signals rather than directly delivering speaker current, so designers still need an efficient external MOSFET power stage. Layout should isolate PWM routing from sensitive input and return paths to reduce switching noise and preserve playback quality.
推薦
Digital Speaker Amplifier Controllers
The TAS5012PFBR can serve as the digital control and PWM-processing element in a true digital audio speaker amplifier. By accepting I2S audio data and using a DSP interface for control, it helps centralize channel management while an external transistor stage handles power amplification. The 48-pin TQFP footprint exposes the required signal, supply, and control connections, but careful partitioning of analog returns, digital clocks, and high-current power paths is essential. Designers should consult the application circuit and timing information in the manufacturer datasheet before reproducing the design.
推薦
Home Audio Signal Processing
A legacy home-audio controller can use the TAS5012PFBR to process two digital audio channels and generate PWM outputs for an external amplifier stage. The device is most appropriate where system architecture already uses I2S and DSP signaling at 3 V to 3.6 V. It is not a direct substitute for a conventional analog power amplifier because the surrounding power stage and control protocol must match. For repair and modernization programs, validate the replacement against the original board schematic, pin map, timing, and calibration procedure before committing it to production.
推薦
Portable Audio Products
The TAS5012PFBR's 3 V to 3.6 V operating supply is compatible with the voltage range commonly considered for low-voltage portable audio electronics, although the listed 0 °C to 70 °C ambient specification limits conventional automotive use. Its digital processing and PWM-control functions can simplify the signal chain in a compact multimedia product that already includes an external power stage. Board-area savings must be weighed against the obsolete lifecycle status, package complexity, and availability risk. New portable designs should assess whether a currently supported digital amplifier controller would reduce procurement and thermal-management risk.
推薦
Industrial Audio Control Systems
The TAS5012PFBR can support specialized industrial audio systems that use two-channel digital audio and a separate PWM power stage. Its DSP and I2S interfaces support controlled signal flow, while the 48-pin package provides separate connections for digital data, power, ground, and control functions. The operating-temperature and lifecycle specifications require careful review for factory equipment that may be deployed in extended temperature conditions or maintained for many years. Robust products should include monitoring for supply faults and should avoid introducing new dependencies on an obsolete processor where a supported platform is available.
推薦
推薦產品摘要
工程參考資料,適用於 TAS5012PFBR — 比較、設計指引及合規資訊。
選型指南
與替代品比較
| 參數 | 本產品 | TAS5012IPFBG4 |
|---|---|---|
| Brand | Texas Instruments | Texas Instruments |
| Package | 48-TQFP (7x7) | 48-TQFP (7x7) |
| Product Type | True digital audio PWM processor | True digital audio PWM processor |
| Number of Channels | 2 channels | 2 channels |
| Interfaces | DSP and I2S | DSP and I2S |
| Supply Voltage Range | 3 V to 3.6 V | 3 V to 3.6 V |
| Operating Temperature | 0 °C to 70 °C (TA) | 0 °C to 70 °C (TA) |
| Audio Specification | 102 dB | 102 dB |
| Mounting Type | Surface mount | Surface mount |
主要差異化特點
- Original ordering code with documented obsolete status (對比TAS5012IPFBG4)
- Two-channel digital audio processing (對比TAS5012IPFBG4)
- Compatible 48-TQFP footprint (對比TAS5012IPFBG4)
設計說明
Separate the I2S and DSP interface region from PWM output routing and external power-stage switching nodes. Keep clock and data traces short, provide a continuous ground reference beneath the device, and use the manufacturer datasheet's recommended layer stack and via guidance. This 48-pin TQFP device connects digital processing and power-control functions on one package, so poor partitioning can couple switching noise into the audio path.
Design the 3 V to 3.6 V supply rail with the decoupling and sequencing shown in the manufacturer application circuit. Place stable ceramic capacitance at the device's supply and ground pins, maintain short return paths, and account for voltage tolerance and startup ordering at the board level. The TAS5012PFBR generates PWM control signals but does not replace the external power stage or its high-current supply infrastructure.
Do not treat TAS5012IPFBG4 as interchangeable solely because its package matches. Confirm every pin function, supply range, temperature rating, control-interface timing, and qualification requirement in the manufacturer datasheet. Also avoid assuming that obsolete inventory is factory-new or date-code current. Request traceability details before using the original TAS5012PFBR in a long-lived or safety-relevant production run.
合規資訊
The available technical records identify the part as obsolete but do not state RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals status. AEC-Q100 is treated as not applicable because this ordering code is not identified as an automotive-qualified variant.