Texas Instruments

TMS320BC52PZ80 - 80MHz Fixed-Point DSP | Texas Instruments

MPN: TMS320BC52PZ80 ✓ 啟用中
5.25 V Vdss 100-LQFP (14 mm x 14 mm) Package 80 MHz Speed
MOQ: 1 |

TMS320BC52PZ80 概覽

The Texas Instruments TMS320BC52PZ80 is a fixed-point digital signal processor built around a 16-bit TMS320C5x CPU, operating at up to 80 MHz and packaged in a 100-lead LQFP measuring 14 mm by 14 mm. The device combines a specialized DSP instruction set with Harvard-architecture data paths, on-chip memory, and integrated peripherals for high-throughput fixed-point signal processing.

A digital signal processor, or DSP, is a semiconductor optimized to execute filtering, Fourier-transform, waveform-generation, and control algorithms efficiently. Unlike a general-purpose processor, the TMS320BC52 architecture emphasizes parallel program and data memories, single-cycle multiply-accumulate operations, and hardware suited to mathematically intensive workloads. The DSP category forms part of the broader microprocessor and embedded-processing semiconductor hierarchy.

The processor provides single-cycle execution at 80 MHz, 16-bit multiply/add capability, 16-bit address-bus width, and 1,056 RAM words. Its architecture supports instruction execution times of 25 ns, 35 ns, and 50 ns for 5 V operation, while the listed 3 V timing figures are 25 ns, 40 ns, and 50 ns. These characteristics suit real-time filtering, control, communications, instrumentation, and embedded audio processing systems.

The TMS320C5x generation was fabricated with static CMOS integrated-circuit technology and built upon the earlier TMS320C25 architecture. Its Harvard organization separates instruction execution from data access, supporting concurrent operations when the internal memory and peripheral arrangement permit. On-chip program and data memories reduce external-bus traffic for many DSP workloads, while specialized peripherals support practical interfacing and system timing.

Typical uses include digital audio processing, industrial motor control, communications filtering, spectrum analysis, instrumentation, and embedded signal generation. The 80 MHz clock rate allows substantial arithmetic throughput for sampled-data systems, although real-time performance depends on the selected instruction mix, memory configuration, interface rate, and interrupt overhead. Firmware and external memory configuration must support the timing requirements of the selected signal chain.

When laying out a design, follow the manufacturer pin-description table for every power, ground, clock, memory, and peripheral connection. Place decoupling capacitors close to the supply pins, route the clock with controlled impedance, and preserve the required isolation between sensitive analog functions and high-current digital outputs. Validate memory timing and external-bus behavior at the intended clock frequency rather than relying only on nominal processor performance.

This product overview combines the processor's key architecture and ordering information with package, sourcing, lifecycle, and replacement guidance. It also distinguishes verified drop-in options from related processors that may require software, memory-map, peripheral, or PCB changes, helping engineers make a defensible sourcing and design decision.

直接替換替代品,適用於 TMS320BC52PZ80 — 相同封裝,腳位對腳位相容。需重新設計 PCB 的不同封裝零件不列入。

TMS320BC52PZ75

✅ 直接替換 ⚠️ 規格未經驗證
📦 100-LQFP (14 x 14 mm)
Maximum clock is 75 MHz versus 80 MHz, a 6.25% reduction; verify memory timing and power conditions.

📋 參考替代品(不在目錄中)

TMS320BC52PZ80A

✅ 直接替換 ⚠️ 規格未經驗證
📦 100-LQFP (14 x 14 mm)
Same nominal 80 MHz clock and package; the A suffix identifies a family revision whose device revision and electrical details must be checked.

📋 參考替代品(不在目錄中)

TMS320BC52PZ100

✅ 直接替換 ⚠️ 規格未經驗證
📦 100-LQFP (14 x 14 mm)
Maximum clock is 100 MHz versus 80 MHz, a 25% increase; validate memory timing, power dissipation, and firmware timing.

📋 參考替代品(不在目錄中)

TMS320BC52PZ110

✅ 直接替換 ⚠️ 規格未經驗證
📦 100-LQFP (14 x 14 mm)
Maximum clock is 110 MHz versus 80 MHz, a 37.5% increase; confirm operating conditions and pin-level compatibility before substitution.

📋 參考替代品(不在目錄中)

TMS320BC52PZ80 規格

Device Type Fixed-point digital signal processor (DSP)
最大時脈頻率 80 MHz
CPU Word Length 16 bit
Architecture TMS320C5x Harvard architecture
Instruction Set TMS320C5x DSP instruction set
Process Technology Static CMOS
Multiplier Single-cycle 16-bit multiply/add
RAM Capacity 1,056 words
Address Bus Width 16 bit
5 V Operation Execution Time 25 ns, 35 ns, and 50 ns
3 V Operation Execution Time 25 ns, 40 ns, and 50 ns
Maximum Supply Voltage 5.25 V
封裝 100-LQFP (14 mm x 14 mm)
Package Pin Count 100 pins
Terminal Form Gull wing
Package Shape Square
Temperature Grade Commercial
安裝方式 Surface mount

TMS320BC52PZ80 square 腳位配置指南

TMS320BC52PZ80(square 封裝)的腳位配置。 腳位編號、功能與連接圖定義於製造商資料手冊中。請參閱該手冊以取得確切的封裝尺寸與焊接指引。

TMS320BC52PZ80 的 square 封裝腳位圖

無詳細腳位定義資料: TMS320BC52PZ80.

請參閱 資料表 以查看完整腳位配置。

典型應用

TMS320BC52PZ80 適用於 6 應用s: Digital Audio Filtering, Industrial Motor Control, Communications Signal Processing, Spectrum and Waveform Analysis, Industrial Instrumentation, Communications Interface Conditioning.

🎧

Digital Audio Filtering

The TMS320BC52PZ80 fits fixed-point digital audio filtering because its 16-bit CPU, single-cycle multiply/add operation, and 80 MHz clock support the repeated multiply-accumulate workload used by equalizers, interpolators, decimators, and noise-reduction filters. The device can evaluate filter coefficients and sample data through its DSP-oriented instruction set and Harvard architecture. Designers should budget cycles for coefficient loading, block processing, and any serial audio interface while keeping the sample rate, filter order, and data-transfer latency within the target specification.

🏭

Industrial Motor Control

The TMS320BC52PZ80 is suitable for embedded industrial control algorithms that combine sampled feedback, fixed-point math, and real-time timing. Its 16-bit CPU, 1,056 RAM words, 16-bit address bus, and single-cycle multiply/add capability are useful for proportional-integral control, filtering, and signal transformation. The implementation must account for sampling latency, interrupt jitter, control-loop bandwidth, and isolation between power-stage switching and sensitive processor signals. Commercial-grade ordering should also be checked against the finished equipment's environmental and qualification requirements.

🌐

Communications Signal Processing

The TMS320BC52PZ80 can support communications signal-processing blocks that repeatedly perform filtering and arithmetic on sampled data. At up to 80 MHz, its 16-bit fixed-point core provides a dedicated execution path for multiply/add-heavy algorithms, while on-chip memory helps reduce external bus activity. System designers should calculate the cycle budget for the selected channel rate, filter length, symbol processing, and peripheral transfers. Serial-interface timing, frame synchronization, buffer management, and error recovery remain application-level tasks that must be validated in the complete design.

🖥️

Spectrum and Waveform Analysis

The TMS320BC52PZ80 is appropriate for embedded spectrum analysis and waveform generation when fixed-point execution and deterministic control are important. The 80 MHz processor can perform tightly scheduled filtering, transform-related arithmetic, interpolation, and digital oscillator updates, subject to memory and peripheral bandwidth. A practical instrument implementation should partition the task into acquisition, processing, and output stages, measure worst-case execution time, and preserve timing accuracy across serial data transfers. The 1,056-word RAM specification should be checked against the selected algorithm and buffering strategy.

🔧

Industrial Instrumentation

The TMS320BC52PZ80 can serve as the processing core in measurement equipment that applies calibration, filtering, interpolation, or compensation to acquired sensor data. Its fixed-point 16-bit architecture supports efficient DSP kernels, and the TMS320C5x instruction set is tailored to multiply-accumulate operations. Instrument designers should define the required input resolution, sample rate, calibration update rate, and latency before committing to the processor. Clock jitter, analog-to-digital converter timing, grounding, supply noise, and digital-to-analog reconstruction are equally important to end-to-end measurement accuracy.

🌐

Communications Interface Conditioning

The TMS320BC52PZ80 is usable in communication-interface conditioning systems that need real-time filtering or protocol-specific signal transformation close to the data source. Its single-cycle 16-bit multiply/add capability supports efficient sample manipulation, while the 80 MHz operating point provides processing margin for multi-stage algorithms. The system designer must verify that external memory, serial ports, and interrupt timing can sustain the selected data rate. Because the device includes on-chip peripherals and memory, software mapping and memory-cycle budgeting should be completed before external interface hardware is fixed.

What are the key specifications of TMS320BC52PZ80 that engineers should know?
The TMS320BC52PZ80 is an 80 MHz fixed-point DSP with a 16-bit TMS320C5x CPU, 1,056 RAM words, a 16-bit address bus, and single-cycle 16-bit multiply/add capability. It uses static CMOS technology and is supplied in a 100-LQFP package measuring 14 mm by 14 mm. According to the Texas Instruments TMS320BC52 datasheet, the device also supports Harvard-style instruction and data paths with on-chip memory and peripherals.
What is TMS320BC52PZ80 and what is it used for?
The TMS320BC52PZ80 is a fixed-point digital signal processor built around a 16-bit TMS320C5x CPU and operating at up to 80 MHz. Its architecture is optimized for filtering, waveform processing, communications, industrial control, and other mathematically intensive tasks. The Texas Instruments TMS320BC52 datasheet describes single-cycle multiply/add execution, static CMOS construction, on-chip memory, and specialized peripherals for embedded DSP systems.
Where can I download the TMS320BC52PZ80 datasheet PDF?
The TMS320BC52PZ80 datasheet PDF is available through the manufacturer-document link listed on this page and through the Texas Instruments product documentation. It covers the TMS320BC52 architecture, register organization, memory interface, peripherals, electrical characteristics, and package information. The component is ordered as a fixed-point 80 MHz DSP in a 100-LQFP package, so engineers should match the full ordering code when consulting the document.
Where can I find the TMS320BC52PZ80 pinout?
The TMS320BC52PZ80 pinout is defined in the pin-description table and package drawing of the Texas Instruments TMS320BC52 datasheet. The device has 100 pins in a square 14 mm by 14 mm LQFP package. Use that table when assigning power rails, grounds, clock inputs, external-memory interfaces, serial ports, timer signals, and control pins, because assigning signals from a generic 100-pin package diagram can cause electrical or timing errors.
How much RAM and addressable memory does TMS320BC52PZ80 provide?
The TMS320BC52PZ80 is listed with 1,056 RAM words and a 16-bit address bus. These values identify its internal data-storage capacity and the width of the processor's address interface, but they do not by themselves define the total memory available in a finished system. According to the Texas Instruments TMS320BC52 documentation, external memory behavior and maximum addressable capacity must be evaluated from the processor architecture and board configuration.
Is TMS320BC52PZ80 suitable for real-time DSP applications?
The TMS320BC52PZ80 is suitable for many real-time DSP workloads because its 16-bit TMS320C5x CPU operates at up to 80 MHz and includes single-cycle 16-bit multiply/add operations. It is particularly relevant to filtering, control, communications, and instrumentation designs using fixed-point arithmetic. Actual signal throughput depends on the instruction mix, memory timing, interrupt rate, and data-transfer architecture of the complete application.
What is the difference between TMS320BC52PZ80 and TMS320F206PZA?
TMS320BC52PZ80 is a TMS320BC52 fixed-point DSP with an 80 MHz maximum clock, 1,056 RAM words, and a 16-bit address bus. TMS320F206PZA belongs to a different Texas Instruments processor family, so the family change may affect CPU architecture, peripherals, memory organization, software support, and board compatibility. A direct replacement cannot be established from the verified product information; compare the manufacturer data sheets and pin descriptions before considering any PCB reuse.
TMS320BC52PZ80 vs TMS320F28066PZT: which is better for digital signal processing?
TMS320BC52PZ80 is the more direct choice for classic fixed-point DSP work because it is specified as an 80 MHz DSP with a 16-bit CPU and dedicated multiply/add operation. TMS320F28066PZT is identified as a different Texas Instruments processor family with its own real-time-control capabilities. The better choice depends on the required peripherals, control-loop architecture, development tools, qualification, and software ecosystem rather than clock frequency alone.
When should I choose TMS320BC52PZ80 over a different Texas Instruments DSP?
Choose TMS320BC52PZ80 when an existing design is specifically organized around the TMS320BC52 architecture, the 80 MHz fixed-point DSP operating point, and its established memory and peripheral layout. Select a different processor when the design requires newer peripherals, a different control architecture, updated software tooling, or qualification that the BC52 does not provide. This recommendation favors hardware continuity in legacy-style DSP signal chains rather than unrestricted new feature selection.
Is TMS320BC52PZ80 suitable for industrial motor-control equipment?
The TMS320BC52PZ80 can support industrial signal-processing and embedded control functions because it combines a 16-bit DSP CPU, single-cycle multiply/add operation, on-chip memory, and specialized peripherals. Its suitability for a motor-control product depends on the required PWM/control resources, interface timing, isolation, operating-temperature grade, functional safety obligations, and electromagnetic requirements. The listed ordering code is identified as commercial grade, so demanding industrial qualifications should be checked before release.
What is the best drop-in replacement for TMS320BC52PZ80?
No verified drop-in replacement for TMS320BC52PZ80 has been established. A valid replacement must use the same 100-LQFP footprint, preserve pin assignments, match the relevant electrical limits, retain compatible memory and peripheral interfaces, and support the system's existing software or receive a controlled port. Related processors cannot be treated as drop-in parts solely because they are Texas Instruments devices; request current manufacturer cross-reference and lifecycle guidance through the Request a Quote form.
What can replace TMS320BC52PZ80?
TMS320BC52PZ80 can only be replaced safely after checking package, pinout, supply voltage, clock performance, memory map, peripherals, timing, software, and lifecycle requirements. The verified cross-reference search does not identify a part that can be confirmed as pin-to-pin and drop-in compatible. Treat related Texas Instruments DSPs as redesign candidates unless their manufacturer documentation explicitly establishes compatibility with every required signal and software dependency.
Is there a cross-brand equivalent for TMS320BC52PZ80?
No cross-brand equivalent is confirmed as a drop-in replacement for TMS320BC52PZ80. The cross-reference results provide comparison tools and generic substitution guidance but do not identify a candidate with verified 100-pin package compatibility, matching pinout, and equivalent memory, peripheral, and software behavior. A cross-brand source should be considered only after a complete electrical and software comparison, and it should not be installed on the existing footprint without manufacturer-specific compatibility evidence.
Where can I buy TMS320BC52PZ80 and check its lead time?
Use the Request a Quote form on this page to request TMS320BC52PZ80 availability, current lead time, order quantity, and supply information. The exact ordering code is TMS320BC52PZ80, denoting the 80 MHz version in the 100-LQFP package. The manufacturer and distribution records show that the part has been cataloged, but they do not establish current stock for any particular quantity, so production planning should use a current written quotation and lead-time confirmation.
What is the price of TMS320BC52PZ80?
The current commercial terms for TMS320BC52PZ80 should be requested through the Request a Quote form on this page. No qualifying quantity-break price for the exact ordering code is available from the verified listings, so the page does not present a potentially stale unit-price figure. A quote can be matched to the required quantity, package marking, delivery destination, and production schedule before procurement approval.
Is TMS320BC52PZ80 in stock?
Current stock for TMS320BC52PZ80 must be confirmed through the Request a Quote form on this page. The product appears in the Texas Instruments distributor catalog as an 80 MHz fixed-point DSP in a 100-LQFP package, but catalog presence does not guarantee immediately available inventory or a specific reel, tray, or order quantity. Request a quantity-specific availability statement before committing the component to a production build.

工程參考資料,適用於 TMS320BC52PZ80 — 比較、設計指引及合規資訊。

選型指南

Choose TMS320BC52PZ80 when maintaining an existing TMS320BC52 fixed-point DSP design, reusing established TMS320C5x software, or requiring the specific 80 MHz 100-LQFP device. Its 16-bit CPU, 1,056 RAM words, 16-bit address bus, and single-cycle multiply/add operation align with classic filtering, control, communications, and instrumentation workloads. Treat TMS320F206PZA and TMS320F28066PZT as redesign candidates rather than drop-in parts because they belong to different processor families. Before selecting either one, compare peripherals, memory organization, external interfaces, timing, software tools, qualification, and PCB pin assignments. For legacy-product continuation, obtain a current quotation and lifecycle statement through the Request a Quote form; for a new high-volume design, validate long-term supply before committing the footprint and firmware architecture.

與替代品比較

參數 本產品
Brand Texas Instruments
Package 100-LQFP (14 mm x 14 mm)
Device Type Fixed-point digital signal processor (DSP)
Maximum Clock Frequency 80 MHz
CPU Word Length 16 bit
RAM Capacity 1,056 words
Address Bus Width 16 bit
Maximum Supply Voltage 5.25 V
Process Technology Static CMOS
Multiplier Single-cycle 16-bit multiply/add

主要差異化特點

  • Purpose-built fixed-point DSP architecture (對比TMS320F206PZA)
  • On-chip processing resources (對比TMS320F28066PZT)
  • Established package and ordering identity (對比TMS320F206PZA)

設計說明

Assign every connection from the TMS320BC52 datasheet pin-description table before routing the 100-LQFP footprint. Separate processor ground, analog-sensing ground, and power-converter return paths where the system architecture permits, and place high-frequency decoupling close to the relevant supply pins. The 0.5 mm pitch package also requires assembly-capable land geometry and careful review of via placement beneath the device.

Route the clock using a short, continuous path with controlled impedance and avoid sharing sensitive input traces with switching-node or high-current return paths. Establish return-current continuity beneath the clock and serial interfaces to reduce coupled noise. Processor timing margins should be evaluated with the actual external-memory topology, trace loading, and intended operating frequency rather than only with nominal single-cycle timing.

Do not assume that another 100-pin processor is a drop-in replacement. A valid reuse requires identical pin assignment, compatible supply levels, equivalent clock limits, compatible external-memory behavior, matching peripherals, and acceptable software support. Before replacing TMS320BC52PZ80, compare the manufacturer pin tables and electrical specifications, then budget time for firmware, boot, interrupt, and timing validation even when the footprint appears unchanged.

合規資訊

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
無鉛
Unknown
無鹵
Unknown
衝突礦產
Unknown

The manufacturer and catalog information identifies a commercial-grade 100-LQFP DSP but does not state the requested environmental or substance-compliance details. These fields remain unknown rather than being inferred.

資料驗證日期: 2026-11-10 — 資料由 XAIPART 元件工程團隊驗證及整理

相關搜尋

TMS320BC52PZ80 datasheet TMS320BC52PZ80 pinout TMS320BC52PZ80 datasheet pdf TMS320BC52PZ80 equivalent TMS320BC52PZ80 replacement TMS320BC52PZ80 cross reference TMS320BC52PZ80 vs TMS320F206PZA TMS320BC52PZ80 footprint TMS320BC52PZ80 application circuit TMS320BC52PZ80 price TMS320BC52PZ80 stock Texas Instruments TMS320BC52PZ80 TMS320BC52PZ80 80MHz DSP TMS320BC52 100-LQFP pinout

相關元件與詞彙

Texas Instruments TMS320BC52PZ80 TMS320BC52 TMS320C5x CPU TMS320C25 Digital signal processor DSP Fixed-point processor Harvard architecture Static CMOS Single-cycle multiply/add 80 MHz clock 16-bit CPU 16-bit address bus 1,056 RAM words 100-LQFP 14 mm by 14 mm package Digital audio filtering Industrial motor control Communications signal processing Spectrum analysis Industrial instrumentation Signal processing Multipoint advertising network
快速報價 RFQ
請填寫完整詳細資料 — 我們的業務團隊將於 24 小時內回覆
料號 製造商 封裝 QTY 目標價格 小計
✓
報價已提交!

我們將於 24 小時內回覆您的電子郵件

1
詢價已提交
2
已收到報價
3
已下單
4
付款
5
已出貨
6
已送達
檢視詢價單詳情