TMS320C50PGE57 - 57MHz 16-Bit DSP | Texas Instruments
MPN: TMS320C50PGE57 ✓ 啟用中TMS320C50PGE57 概覽
A digital signal processor is a semiconductor designed to execute repetitive mathematical operations on sampled data in real time. Unlike a general-purpose microprocessor, a DSP uses a hardware architecture optimized for filtering, Fourier analysis, waveform generation, and similar workloads. In the electronics hierarchy, the TMS320C50 is a fixed-point DSP, a programmable processor, an integrated circuit, and ultimately a semiconductor.
The TMS320C50PGE57 uses a 16-bit TMS320C5x CPU and supports single-cycle instruction execution. According to the Texas Instruments datasheet, execution times of 25, 35, and 50 ns are available for 5 V operation, while 25, 40, and 50 ns apply for 3 V operation. Its 57 MHz operating rating corresponds to a 28.5 MIPS processing rate in the identified device configuration.
The processor architecture is based on an earlier TMS320C25 DSP and combines separate program and data spaces with hardware support for demanding arithmetic. This structure is intended to accelerate multiply-and-accumulate operations used in digital filters and other real-time algorithms. The device also supports floating-point identification in cross-reference information, although the primary catalog description identifies the target as a fixed-point DSP.
Typical uses include embedded audio processing, speech and communications signal handling, industrial motor control, instrumentation, and embedded signal-processing systems. The 144-LQFP package provides a substantial number of external interface pins and is appropriate for designs requiring parallel external memory, host communication, and multiple peripheral connections.
Designers should preserve the processor's power, clock, memory, and peripheral connections exactly when transferring an existing design. The processor requires careful decoupling around its supply pins, a controlled clock source, and layout that minimizes switching noise and data-bus timing margin. Software compatibility must also be reviewed because instruction timing and peripheral availability can change across TMS320C5x device variants.
This product record combines the verified device classification, package information, architecture description, lifecycle availability, related family members, and practical implementation guidance. It also organizes selection information for engineers comparing the 57 MHz PGE57 configuration with closely related TMS320C50 package and speed variants.
直接替換替代品,適用於 TMS320C50PGE57 — 相同封裝,腳位對腳位相容。需重新設計 PCB 的不同封裝零件不列入。
此系列的變體
與下列產品可直接替換的同系列型號: TMS320C50PGE57 (相同外形與佔位) — 差異在於 Package Type.
TMS320C50PGEA57
✅ 直接替換📋 參考替代品(不在目錄中)
TMS320C50PGE
✅ 直接替換聯絡詢價
查看資料表 →TMS320C50PGEA
✅ 直接替換 ⚠️ 規格未經驗證📋 參考替代品(不在目錄中)
TMS320C50PGE57 規格
| Device Type | Fixed-point digital signal processor (DSP) |
| 最大時脈頻率 | 57 MHz |
| CPU Word Length | 16 bit |
| Processing Rate | 28.5 MIPS |
| Instruction Execution Time at 5 V | 25 ns, 35 ns, or 50 ns |
| Instruction Execution Time at 3 V | 25 ns, 40 ns, or 50 ns |
| Multiplier and Accumulator Architecture | Single-cycle x 16-bit multiply/add x 16-bit |
| Processor Family | TMS320C5x |
| Architecture Basis | TMS320C25 architecture |
| Supply Voltage Option | 3 V or 5 V operation |
| Package Type | 144-LQFP (20 x 20 mm) |
| Package Code | LFQFP |
| Terminal Count | 144 terminals |
| Terminal Form | Gull wing |
| Package Shape | Square |
| 安裝類型 | Surface mount |
| Temperature Grade | Commercial |
| RoHS 狀態 | Unknown |
| REACH Status | Unknown |
| AEC-Q100 Qualification | Not applicable |
TMS320C50PGE57 square 腳位配置指南
TMS320C50PGE57(square 封裝)的腳位配置。 腳位編號、功能與連接圖定義於製造商資料手冊中。請參閱該手冊以取得確切的封裝尺寸與焊接指引。
無詳細腳位定義資料: TMS320C50PGE57.
請參閱 資料表 以查看完整腳位配置。
典型應用
TMS320C50PGE57 適用於 6 應用s: Digital Audio Filtering, Speech and Communications Processing, Industrial Motor Control, Instrumentation and Measurement, Industrial Sensor Signal Processing, Modem and Signal-Interface Equipment.
Digital Audio Filtering
The TMS320C50PGE57 is appropriate for real-time audio filtering because its 16-bit DSP core operates at 57 MHz and provides a documented 28.5 MIPS processing rate. A cascade of biquad sections, equalization filters, or noise-reduction algorithms can execute without the overhead of a general-purpose control processor. The single-cycle multiply-and-accumulate architecture directly benefits convolution and filter operations, while separate program and data spaces support deterministic instruction execution. Designers should match the processor clock to the audio sample rate and use the Texas Instruments external-memory and bus guidance when algorithms exceed internal storage.
推薦
Speech and Communications Processing
The TMS320C50PGE57 can execute communications signal-processing functions requiring predictable real-time performance, including channel filtering, modulation-related arithmetic, spectral analysis, and speech-processing routines. Its 57 MHz clock and 28.5 MIPS rate provide substantial arithmetic throughput for a 16-bit fixed-point architecture. Single-cycle multiply-and-accumulate instructions are particularly useful in convolution filters and correlation operations. For a communications design, engineers should verify clock timing, external memory access, and interrupt latency because those parameters directly influence throughput and deterministic response time.
推薦
Industrial Motor Control
The TMS320C50PGE57 is suitable for embedded control systems that combine signal analysis with deterministic feedback calculations. Its DSP-oriented architecture can support digital filters, observers, transforms, and high-rate control loops while the 144-LQFP package exposes the external memory and peripheral interfaces required by a larger control system. The 28.5 MIPS rate allows substantial computational headroom, but the final loop timing depends on instruction placement, memory wait states, and interrupt service overhead. Validate commercial-grade temperature requirements and analog interface isolation before using the device in a factory environment.
推薦
Instrumentation and Measurement
The TMS320C50PGE57 fits instrumentation systems that must acquire, transform, and interpret sampled measurements in real time. Its 16-bit arithmetic, 57 MHz clock, and single-cycle multiply-and-accumulate execution support filters, curve fitting, frequency analysis, and calibration routines within one embedded processor. The large 144-terminal LQFP package provides access to the device's external memory and parallel interface resources, allowing a designer to pair the DSP with high-speed converters or dedicated memory. The design must account for analog front-end isolation, deterministic clocking, and ground-plane noise control.
推薦
Industrial Sensor Signal Processing
The TMS320C50PGE57 can process sensor streams that require filtering, smoothing, feature extraction, or adaptive control calculations. Its 28.5 MIPS throughput and 16-bit datapath are suitable for conditioning periodic or event-driven inputs while external memory can retain traces, coefficient tables, and calibration data. Because the processor is a digital component, the system designer must handle sensor excitation, analog-to-digital conversion, and input protection separately. Use the manufacturer's pin and power guidance to keep switching converters and high-current peripherals away from sensitive clock and memory routing.
推薦
Modem and Signal-Interface Equipment
The TMS320C50PGE57 is applicable to modem and signal-interface equipment requiring high-throughput arithmetic in a compact embedded platform. DSP instructions accelerate the repeated multiply-and-accumulate operations used by equalizers, filters, and data-rate conversion algorithms, while the 57 MHz clock supports deterministic processing. The 144-LQFP package is useful where parallel external memory and multiple peripheral interfaces are needed. Timing closure depends on memory wait states and bus layout, so the clock, address, data, and control paths should be reviewed against the interface timing requirements.
推薦
推薦產品摘要
工程參考資料,適用於 TMS320C50PGE57 — 比較、設計指引及合規資訊。
選型指南
與替代品比較
| 參數 | 本產品 | TMS320C50PGEA57 | TMS320C50PGE | TMS320C50PGEA |
|---|---|---|---|---|
| Brand | Texas Instruments | Texas Instruments | Texas Instruments | Texas Instruments |
| Package | 144-LQFP (20 x 20 mm) | 144-LQFP (20 x 20 mm) | 144-LQFP (20 x 20 mm) | 144-LQFP (20 x 20 mm) |
| Device Type | Fixed-point digital signal processor (DSP) | Digital signal processor | Digital signal processor | Digital signal processor |
| CPU Architecture | 16-bit TMS320C5x | 16-bit TMS320C5x | 16-bit TMS320C5x | 16-bit TMS320C5x |
| RoHS Status | Unknown | Unknown | Unknown | Unknown |
| REACH Status | Unknown | Unknown | Unknown | Unknown |
主要差異化特點
- Explicit 57 MHz operating configuration (對比TMS320C50PGE)
- Documented package-compatible family relationship (對比TMS320C50PGEA57)
- Commercial-grade 144-LQFP configuration (對比TMS320C50PGEA)
設計說明
Place the required bypass capacitors immediately beside the TMS320C50PGE57 supply pins and connect each capacitor ground terminal directly into the surrounding ground plane. Use the Texas Instruments datasheet to identify every supply and ground terminal rather than assuming that all 144 pins have the same function. Keep switching-regulator and high-current return paths away from the processor and clock circuitry to reduce supply disturbance.
Route the processor clock and external-memory interface as short, controlled-impedance paths, with memory placed close enough for the available address, data, and control signals. Avoid adding test-point stubs where timing margin is limited. Separate analog input routing from the clock, bus, and memory return currents, and maintain a continuous ground reference beneath the device.
Do not treat a matching 144-LQFP outline as proof that every TMS320C50 variant is functionally interchangeable. Before substituting TMS320C50PGEA57, TMS320C50PGE, or TMS320C50PGEA, verify the clock setting, supply limits, temperature grade, memory interface, peripheral availability, and firmware timing. The package may be physically compatible while a device-specific configuration change is still required.
Use the exposed processor area and board copper as part of the thermal design, following the manufacturer power-dissipation and package guidance for the selected operating voltage. Estimated: at 3.3 V and 57 MHz, core power equals 3.3 V multiplied by the actual core current measured in the design; multiply that result by the applicable junction-to-ambient value to estimate temperature rise. Use measured current rather than an assumed current for final thermal verification.
合規資訊
No definitive RoHS, REACH, lead-free, halogen-free, or conflict-minerals statement was identified for this exact MPN. The device is a commercial-grade digital signal processor and is not an automotive-qualified product.