TMS320DM369ZCED - 432MHz DaVinci Media SoC | Texas Instruments
MPN: TMS320DM369ZCED ✓ 啟用中TMS320DM369ZCED 概覽
A digital media System-on-Chip, or DMSoC, combines a processor core, programmable peripherals, memory interfaces, and media acceleration in one integrated device. The TMS320DM369 occupies the DSP and embedded-processing portion of that hierarchy: digital signal processor, application processor, system-on-chip, and semiconductor. Its ARM926EJ-S architecture supports control-heavy software while dedicated media capabilities accelerate video encoding and decoding workloads.
The processor operates at 432 MHz and supports H.264, MPEG-4, and MJPEG video formats. According to the manufacturer product information, the device can process 1080p H.264 video at 30 frames per second and low-light HD H.264 720p30 compression. These capabilities make it suitable for networked video, industrial imaging, machine vision, multimedia gateways, and embedded media systems requiring hardware-assisted codec processing.
The integrated interface set broadens the design options available without requiring a separate media controller. Ethernet and USB support network and peripheral connectivity, while SPI, I2C, UART, McBSP, and EBI/EMI support sensors, serial memories, audio devices, and external memories. The 338-NFBGA package offers a high pin count for external bus access, although its fine pitch and large ball array require careful PCB layout, power planning, and assembly-process control.
Typical uses include H.264 network cameras, video encoding gateways, industrial machine-vision controllers, medical imaging peripherals, and multimedia appliances. Firmware and application support must account for the processor's 1.35 V core supply, separate 1.8 V and 3.3 V I/O domains, external memory configuration, thermal management, and the complex high-density BGA power-delivery network.
The most important layout step is separating the core, analog, digital I/O, and interface supplies while preserving continuous return paths beneath high-current balls. Place bulk and high-frequency decoupling capacitance directly beside the associated supply and ground balls, then validate the complete stack-up, via current capacity, and BGA assembly process before volume production.
This product page combines manufacturer specifications, sourcing information, interface guidance, application analysis, and the documented pin-to-pin relationship with the DM365 processor family. It also identifies the electrical and package constraints that must be checked before using the TMS320DM369ZCED as a drop-in replacement or launching a new high-density digital-media design.
直接替換替代品,適用於 TMS320DM369ZCED — 相同封裝,腳位對腳位相容。需重新設計 PCB 的不同封裝零件不列入。
此系列的變體
與下列產品可直接替換的同系列型號: TMS320DM369ZCED (相同外形與佔位) — 差異在於 Processor Architecture.
TMS320DM365ZCEF
✅ 直接替換聯絡詢價
查看資料表 →TMS320DM369ZCED 規格
| Product Type | Digital Media System-on-Chip (DMSoC) |
| Processor Architecture | ARM926EJ-S |
| Clock Rate | 432 MHz |
| DSP Word Length | 16-bit/32-bit |
| Maximum H.264 Video Resolution | 1080p at 30 frames per second |
| Low-Light H.264 Capability | 720p at 30 frames per second |
| On-Chip RAM | 56 kB |
| On-Chip ROM | 16 kB |
| Core Voltage | 1.35 V |
| I/O Voltage | 1.8 V, 3.3 V |
| External Memory Interface | EBI/EMI |
| Network Interface | Ethernet |
| Serial Interfaces | I2C, SPI, UART, McBSP |
| USB Interface | USB |
| Supported Video Codecs | H.264, MPEG-4, MJPEG |
| 封裝 | 338-NFBGA, 13 x 13 mm |
| 安裝類型 | Surface Mount |
TMS320DM369ZCED 338-nfbga, 13 x 13 mm 腳位配置指南
TMS320DM369ZCED(338-nfbga, 13 x 13 mm 封裝)的腳位配置。 腳位編號、功能與連接圖定義於製造商資料手冊中。請參閱該手冊以取得確切的封裝尺寸與焊接指引。
無詳細腳位定義資料: TMS320DM369ZCED.
請參閱 資料表 以查看完整腳位配置。
典型應用
TMS320DM369ZCED 適用於 6 應用s: H.264 Network Camera, Industrial Machine-Vision Controller, Video Encoding Gateway, Medical Imaging Peripheral, Smart Building Sensor Node, Portable Media Device.
H.264 Network Camera
The TMS320DM369ZCED fits an H.264 network camera because its 432 MHz ARM926EJ-S core and dedicated media capability support 1080p H.264 at 30 frames per second, while Ethernet provides the network path for live or recorded video. The integrated EBI/EMI interface can connect to external DDR memory when the working set exceeds the 56 kB on-chip RAM. A practical design should partition image capture, ISP, encoding, and network services so encoding deadlines are not affected by unrelated control traffic. Ethernet PHY integration and magnetic-component layout should be evaluated against the required isolation and distance. The processor's 1.35 V core and separate 1.8 V or 3.3 V I/O domains require clean, sequenced rails with local decoupling at the 338-NFBGA supply balls.
推薦
Industrial Machine-Vision Controller
The TMS320DM369ZCED is suitable for an industrial machine-vision controller that must acquire camera data, apply image processing, and encode results without a separate media accelerator. Its 16-bit/32-bit DSP architecture and 432 MHz ARM926EJ-S core provide compute capacity for real-time control logic, while H.264, MPEG-4, and MJPEG support accelerates common inspection and monitoring formats. The EBI/EMI interface can support external memory, and I2C, SPI, UART, and McBSP allow connection to image sensors, triggers, and actuators. Design the pipeline to account for pixel throughput, frame latency, and external-memory bandwidth rather than processor clock rate alone. Industrial temperature, EMC, isolation, and long-term supply requirements must be checked separately.
推薦
Video Encoding Gateway
A multimedia gateway can use the TMS320DM369ZCED to consolidate multiple media streams because the device combines a 432 MHz ARM926EJ-S core with H.264 processing at up to 1080p30. Ethernet accepts upstream sources, and the system-on-chip's serial interfaces can connect to storage controllers, configuration devices, or local control hardware. External DDR through EBI/EMI may be necessary for frame buffers and network buffering. Firmware should prioritize media deadlines, use hardware-assisted codec paths, and keep protocol processing from blocking frame transfer. The high-density 338-NFBGA package requires careful layer assignment, decoupling, and BGA assembly validation, while the 1.35 V core rail needs a low-noise supply suitable for high-performance digital logic.
推薦
Medical Imaging Peripheral
The TMS320DM369ZCED can serve as the processing engine in a medical imaging peripheral when the system needs local image acquisition, H.264 or MJPEG processing, and compact control logic in one device. Its 432 MHz ARM926EJ-S core supports application software, while the media engine reduces the processing burden associated with supported compressed formats. EBI/EMI permits external-memory expansion, and McBSP, SPI, I2C, and UART support sensors and peripheral controllers. The design must validate all clinical signal-chain requirements rather than relying on general-purpose codec performance. Medical use requires evaluation of applicable electrical-safety, electromagnetic-compatibility, environmental, and documentation requirements. Power-domain sequencing, grounded return paths, and thermal performance of the 338-NFBGA layout are particularly important in compact enclosures.
推薦
Smart Building Sensor Node
The TMS320DM369ZCED can support a smart-building sensor node that performs local detection, video analytics, and media compression before forwarding information over Ethernet or another embedded interface. Its 56 kB on-chip RAM is useful for small control tasks, while external memory can be added through EBI/EMI when storing frames or running larger algorithms. I2C and SPI suit environmental sensors and configuration devices, while UART can support local diagnostics. Using supported H.264, MPEG-4, or MJPEG paths can reduce bandwidth compared with sending raw image data. Designers should define power-budget and duty-cycle objectives early because the 432 MHz processor and 338-NFBGA package may require substantial board area. Wake behavior, firmware partitioning, and Ethernet isolation should be validated for the intended installation environment.
推薦
Portable Media Device
A portable media device can use the TMS320DM369ZCED when local H.264 or MJPEG decoding and multimedia control must be combined with low-latency external connectivity. The 432 MHz ARM926EJ-S core handles operating-system and application tasks, while the media functions handle supported compressed formats. EBI/EMI supports external memory for larger frame buffers, and SPI, I2C, UART, and USB allow attachment of flash storage, sensors, controls, or peripheral devices. A portable design must carefully budget energy because the processor operates from a 1.35 V core rail while the I/O domains support 1.8 V and 3.3 V. Compact placement reduces trace lengths but leaves little room for thermal spreading, so thermal analysis and shutdown behavior should be evaluated before defining the enclosure and battery configuration.
推薦
推薦產品摘要
工程參考資料,適用於 TMS320DM369ZCED — 比較、設計指引及合規資訊。
選型指南
與替代品比較
| 參數 | 本產品 | TMS320DM365 |
|---|---|---|
| Brand | Texas Instruments | Texas Instruments |
| Package | 338-NFBGA (13 x 13 mm) | 338-NFBGA (13 x 13 mm) |
| Product Type | Digital Media System-on-Chip | Digital Signal Processor |
| Processor Core | ARM926EJ-S | ARM926EJ-S |
| Clock Rate | 432 MHz | 432 MHz |
| Pin Compatibility | TMS320DM369ZCED | Manufacturer states that DM369 is pin-to-pin compatible with DM365 |
主要差異化特點
- Higher documented H.264 processing capability (對比TMS320DM365)
- Documented pin-to-pin migration path (對比TMS320DM365)
- Broad integrated media-device connectivity (對比TMS320DM365)
設計說明
Plan the 1.35 V core rail and the 1.8 V and 3.3 V I/O rails as separate distribution domains, and follow the manufacturer power-sequencing and supply requirements. Place bulk capacitance near the supply entry points and local high-frequency decoupling beside the corresponding NFBGA supply and ground balls. Validate transient response against the processor clock and external-memory activity; a statically regulated rail can still produce unacceptable local droop if the package's high-current switching loops are inadequately connected.
Design the 338-NFBGA footprint from the official ball map and verify pad dimensions, solder-mask definition, paste apertures, and assembly capability with the chosen PCB and packaging process. Preserve uninterrupted ground-reference paths beneath routed signal layers and use multiple vias where the manufacturer footprint requires them. Account for the 13 x 13 mm package's thermal and electrical escape requirements before finalizing layer count, and prototype the assembly process before committing to production quantities.
Route external-memory and high-speed interface signals as a controlled group with continuous reference planes, length matching where required, and deliberate layer transitions. The EBI/EMI interface is particularly sensitive to return-path discontinuities and power-bounce coupling. Use the manufacturer interface timing and layout guidance, and verify the complete memory topology with signal-integrity simulation because the available package-level specifications do not by themselves guarantee a robust board implementation.
Do not treat physical pin compatibility as proof of a complete drop-in migration. Before replacing a DM369 design with a DM365 device, confirm the exact package suffix, exposed-pad treatment, supported external memory devices, boot configuration, peripherals, firmware initialization, and media-feature expectations. Also confirm that all required rails and reset signals are unchanged. The manufacturer's compatibility statement supports a migration path, but software and board-level validation remain essential responsibilities of the design engineer.
合規資訊
The manufacturer lists TMS320DM369ZCED as active, but the available product information does not state the requested environmental, lead-free, halogen-free, conflict-minerals, or automotive qualification details. Confirm these conditions for the exact ordering option before production release.