TUSB2046AVF - 4-Port USB Hub | Texas Instruments
MPN: TUSB2046AVF ✓ 啟用中TUSB2046AVF 概覽
A USB hub controller is a semiconductor interface device that manages one upstream USB connection and distributes it among multiple downstream ports. The TUSB2046AVF belongs to the USB interface-controller hierarchy, where it sits between a host controller or host computer and USB peripherals such as keyboards, mice, printers, storage devices, and industrial USB equipment. Its integrated transceivers reduce the number of external USB data-path components required in a hub design.
The principal feature set includes four downstream hub ports, USB full-speed operation at 12 Mbit/s, integrated USB transceivers, integrated state-machine logic, and an optional serial EEPROM interface. The EEPROM connection can provide a configurable hub identity and descriptors when the system designer does not use a different configuration method. A 3.3 V operating rail also allows the controller to operate in conventional 3.3 V digital systems without a dedicated 5 V hub-controller supply.
The TUSB2046A controller combines a four-port USB full-speed hub architecture with low-power 3.3 V logic. Because it is a full-speed rather than high-speed USB 2.0 hub controller, its 12 Mbit/s maximum data rate is appropriate for legacy peripherals, keyboards, mice, service interfaces, and other devices that do not require 480 Mbit/s USB high-speed transfers. The optional EEPROM interface adds configuration flexibility without making serial EEPROM mandatory in every implementation.
Typical applications include legacy USB expansion, embedded host systems, industrial data-acquisition equipment, USB peripheral connection hubs, and retrofits that add USB connectivity to equipment designed around older host interfaces. In each case, the four-port organization consolidates several full-speed peripherals behind one upstream USB link while keeping the implementation compact.
PCB design should preserve short, impedance-controlled USB signal paths, provide clean power and ground distribution, and place input and output capacitance close to the relevant device pins as directed by the manufacturer datasheet. Designers should also verify the upstream and downstream connector overcurrent, power-budget, and USB signal-integrity requirements for the complete hub assembly.
This page organizes the confirmed device identity, package details, interface capabilities, sourcing path, application guidance, and verified drop-in alternatives for engineers. Because detailed pin assignments and several electrical limits are not established by the accessible manufacturer material, the datasheet should remain the controlling reference before schematic release or PCB layout approval.
直接替換替代品,適用於 TUSB2046AVF — 相同封裝,腳位對腳位相容。需重新設計 PCB 的不同封裝零件不列入。
此系列的變體
與下列產品可直接替換的同系列型號: TUSB2046AVF (相同外形與佔位) — 差異在於 Serial EEPROM Interface.
TUSB2046BVF
✅ 直接替換聯絡詢價
查看資料表 →TUSB2046AVF 規格
| Product Type | 4-port USB hub controller |
| USB Downstream Port Count | 4 ports |
| USB Compatibility | USB 1.1 compliant |
| Maximum Full-Speed Data Rate | 12 Mbit/s |
| Logic Supply Voltage | 3.3 V |
| Integrated USB Transceivers | Yes |
| Integrated State Machine | Yes |
| Serial EEPROM Interface | Optional |
| ASIC Logic | Low-power ASIC logic |
| Package Type | 32-pin LQFP |
| Lead Pitch | 0.8 mm |
| Package Body Shape | Square |
| 安裝方式 | Surface mount |
| Temperature Grade | Commercial |
| Terminal Count | 32 terminals |
| RoHS Compliance | unknown |
| REACH Compliance | unknown |
| AEC-Q100 Qualification | unknown |
TUSB2046AVF square 腳位配置指南
TUSB2046AVF(square 封裝)的腳位配置。 腳位編號、功能與連接圖定義於製造商資料手冊中。請參閱該手冊以取得確切的封裝尺寸與焊接指引。
無詳細腳位定義資料: TUSB2046AVF.
請參閱 資料表 以查看完整腳位配置。
典型應用
TUSB2046AVF 適用於 6 應用s: Legacy USB Peripheral Expansion, Industrial Data-Acquisition Hub, Embedded Host USB Connectivity, USB Service and Diagnostic Interface, Equipment Retrofit and Connectivity Hub, USB-to-Peripheral Connection Panel.
Legacy USB Peripheral Expansion
The TUSB2046AVF fits legacy USB expansion designs that need to connect up to four full-speed peripherals through one upstream host link. Its 4-port USB hub architecture and 12 Mbit/s full-speed operation match keyboards, mice, printers, service interfaces, and other USB 1.1-era devices. The 3.3 V logic implementation can simplify system integration when the host platform already operates its digital support circuitry at 3.3 V. Designers should budget connector power for all attached devices, implement USB overcurrent protection, and preserve short USB traces. Because the four ports share one upstream link, the design must treat 12 Mbit/s as an aggregate full-speed capability rather than four simultaneous high-speed channels.
推薦
Industrial Data-Acquisition Hub
The TUSB2046AVF can serve as the USB connectivity hub in industrial data-acquisition equipment that connects several full-speed sensors, service tools, or configuration interfaces to a host computer. Four downstream ports reduce the need for multiple external USB-to-serial adapters, while the 12 Mbit/s rate is appropriate for many low-bandwidth control and status channels. The optional serial EEPROM interface can support stored hub identity or configuration when required. For industrial deployment, verify the commercial temperature grade against the enclosure temperature, validate USB bus-power limits for the attached load, and isolate noisy power and ground paths to avoid disturbing sensitive measurement channels.
推薦
Embedded Host USB Connectivity
The TUSB2046AVF is suitable for embedded host equipment that must expose multiple USB peripheral connections through a compact controller implementation. Its integrated USB transceivers and state machine consolidate the core hub functions, while the 32-pin LQFP package supports conventional surface-mount assembly. An embedded design can use the upstream connection to an embedded USB host controller and route the four downstream ports through protected connectors. The 3.3 V logic rail should share a properly filtered supply with the rest of the digital system. Keep D+ and D+ data routing symmetrical and short, provide the required series termination where specified, and validate compliance using the complete board rather than the IC alone.
推薦
USB Service and Diagnostic Interface
The TUSB2046AVF can consolidate service, diagnostic, and configuration peripherals in a USB full-speed hub assembly. Four ports allow a technician to connect tools such as a keyboard, flash drive, programming adapter, or status display while the equipment remains connected to its primary host. The controller's 12 Mbit/s full-speed capability is appropriate for this mixed set of low-speed and full-speed devices. Optional EEPROM support can preserve a distinct hub identity where the system requires it. During implementation, identify the electrical requirements of every attached peripheral, calculate the total available bus current, and avoid assuming that all four ports can source their maximum permitted load simultaneously from the same upstream source.
推薦
Equipment Retrofit and Connectivity Hub
The TUSB2046AVF is useful when retrofitting legacy equipment with a consolidated USB peripheral interface. Instead of adding separate host ports to a control board, an integrator can route one upstream link through a four-port hub controller to external keyboards, mice, removable media, and configuration adapters. The full-speed 12 Mbit/s limit suits legacy accessories and management traffic more than high-bandwidth storage. The 32-pin LQFP footprint requires careful fanout from the existing board, while the 3.3 V logic supply should be derived from a stable rail with adequate filtering. Check the original host controller's current budget and USB compliance before installation, and preserve the upstream device address topology expected by the host software.
推薦
USB-to-Peripheral Connection Panel
The TUSB2046AVF can form the controller section of a protected connection panel that turns one host USB port into four external peripheral ports. The integrated transceivers and state-machine logic reduce the external active-device count, making the panel straightforward to design around a single 3.3 V controller supply. Each connector path must still include the protection, filtering, and power-delivery provisions appropriate to the system. USB data conductors should follow matched, short routing with no unnecessary stubs, while connector and board ground connections must maintain a low-impedance return path. The finished panel should be checked for hot-plug behavior, downstream overcurrent response, and enumeration across all four ports under the intended full-speed workload.
推薦
推薦產品摘要
工程參考資料,適用於 TUSB2046AVF — 比較、設計指引及合規資訊。
選型指南
與替代品比較
| 參數 | 本產品 | TUSB2046BVF |
|---|---|---|
| Package | 32-pin LQFP | 32-pin LQFP - same package |
| Brand | Texas Instruments | Texas Instruments |
| USB Port Count | 4 downstream ports | 4 downstream ports |
| Maximum Data Rate | 12 Mbit/s full-speed | 12 Mbit/s full-speed |
| USB Generation | USB 1.1 compliant | USB 2.0 full-speed hub |
主要差異化特點
- Exact match in core hub capacity and full-speed data rate (對比TUSB2046BVF)
- Established USB 1.1 identity for legacy integration (對比TUSB2046BVF)
- Optional configuration-memory interface (對比TUSB2046BVF)
設計說明
Route upstream and downstream USB D+ and D- pairs as short, matched, continuous traces. Avoid adding test pads, stubs, or unnecessary layer transitions on the high-speed data paths, and maintain consistent reference-plane continuity. The four downstream branches also require deliberate topology planning so that connector and protection-component placement does not create long stubs or unequal data-path lengths.
Design the 3.3 V logic rail with low impedance and place its decoupling components close to the controller's supply and ground terminals. Calculate the upstream hub power budget from the actual downstream-device loads rather than treating each port as independently available. External port-power switching, overcurrent protection, and the required USB attachment behavior should be evaluated as a complete system rather than implemented only around the controller IC.
Use the manufacturer's 32-pin LQFP land pattern and account for the 0.8 mm lead pitch when assigning solder-mask and paste features. Maintain adequate assembly clearance on both sides of the package and inspect the exposed lead geometry after reflow. Follow the recommended component orientation and pin-1 marking so that manufacturing and inspection drawings remain unambiguous.
Do not infer a complete pinout from the package drawing or from the TUSB2046B product page. Confirm every terminal name and function against the appropriate manufacturer pin-description table, including power, ground, configuration, test, and no-connect pins. Also distinguish the TUSB2046A from the TUSB2046B revision before treating the latter as a production substitution.
合規資訊
The accessible manufacturer and distributor material does not state the RoHS, REACH, lead-free, halogen-free, or conflict-minerals status for this exact MPN. AEC-Q100 is treated as not applicable because this is a commercial USB interface controller rather than an automotive-qualified device, and no automotive qualification is identified.