TUSB3410RHBT - USB Serial Port Bridge | Texas Instruments
MPN: TUSB3410RHBT ✓ 啟用中TUSB3410RHBT 概覽
A USB serial port controller is an interface integrated circuit that allows equipment using UART, I2C, or IrDA serial signaling to communicate through a USB host. Within the product hierarchy, it belongs to the USB interface IC and application-specific microcontroller categories, combining firmware-driven control, USB device logic, and serial-port connectivity in one component.
The TUSB3410 includes an 8052 core, 10 kB of ROM, four I/O lines, and support for UART, I2C, IrDA, and USB serial functions. Its integrated design reduces the need for separate USB-to-serial interface hardware while retaining the familiar serial connectors and signal levels used by established industrial and embedded equipment.
The manufacturer datasheet explains that USB compliance requires the device to become ready to respond to the host within 100 ms. During this interval, the controller must leave reset, load configuration data from an I2C EEPROM when applicable, and transfer execution to application firmware. This startup sequence is important when validating USB enumeration and host-driver compatibility.
Typical uses include USB-to-UART adapters, industrial data-collection equipment, IrDA peripherals, legacy serial-console systems, and USB-to-I2C bridges. The TUSB3410 is particularly relevant when an existing serial-port design must become USB-compatible without changing the host-side application software around the serial interface.
Design the power, USB, UART, I2C, and optional IrDA sections according to the manufacturer datasheet. Keep USB routing compact and controlled, provide the required input and output capacitance at the device, and account for EEPROM access and firmware startup before expecting the host to communicate successfully.
This page combines manufacturer device information, verified commercial references, drop-in cross-reference results, and practical selection guidance. It also distinguishes confirmed drop-in options from functional alternatives that require a different footprint, helping engineers avoid substitutions that cannot be soldered onto the original PCB land pattern.
直接替換替代品,適用於 TUSB3410RHBT — 相同封裝,腳位對腳位相容。需重新設計 PCB 的不同封裝零件不列入。
此系列的變體
與下列產品可直接替換的同系列型號: TUSB3410RHBT (相同外形與佔位) — 差異在於 Package, Device Type.
TUSB3410RHBR
✅ 直接替換聯絡詢價
查看資料表 →TUSB3410RHBG4
✅ 直接替換📋 參考替代品(不在目錄中)
TUSB3410RHBT 規格
| Device Type | USB serial port controller |
| Core Processor | 8052 |
| Program Memory | 10 kB ROM |
| Interface Functions | UART, I2C, IrDA, and USB |
| Number of I/O Lines | 4 |
| 工作溫度範圍 | 0°C to 70°C |
| 封裝 | 32-pin VQFN (RHB), 5 mm x 5 mm |
| 安裝類型 | Surface mount |
| Terminals | 32 terminals |
| Package Shape | Square |
| Lead Style | No lead |
| USB Response Readiness | Within 100 ms after reset |
| Configuration EEPROM Interface | I2C |
TUSB3410RHBT square 腳位配置指南
TUSB3410RHBT(square 封裝)的腳位配置。 腳位編號、功能與連接圖定義於製造商資料手冊中。請參閱該手冊以取得確切的封裝尺寸與焊接指引。
無詳細腳位定義資料: TUSB3410RHBT.
請參閱 資料表 以查看完整腳位配置。
典型應用
TUSB3410RHBT 適用於 6 應用s: USB-to-UART Serial Adapter, Industrial USB Data Collection, IrDA Peripheral Interface, USB-to-I2C Configuration Bridge, Legacy Equipment USB Retrofit, USB Serial Console and Diagnostics.
USB-to-UART Serial Adapter
The TUSB3410RHBT fits legacy serial-console and service-port designs that need a USB-facing host connection without changing the UART-facing firmware model. Its 8052 core, 10 kB ROM, and dedicated UART and USB functions place the protocol conversion and device control in one package. The design can expose the original serial interface through USB while retaining the 32-pin VQFN surface-mount footprint used by the controller. Firmware must complete initialization and configuration loading within the manufacturer-stated 100 ms response window so the host can begin enumeration and communication.
推薦
Industrial USB Data Collection
The TUSB3410RHBT is suitable for industrial data-collection equipment that combines a USB host interface with an embedded serial subsystem. Its 8052 processor, 10 kB ROM, four I/O lines, and support for UART, I2C, and IrDA allow the same controller to manage a primary serial link and configuration or peripheral interfaces. The 0°C to 70°C rating covers many indoor commercial and industrial environments. A robust implementation should account for the 100 ms USB readiness requirement, provide the required EEPROM configuration path where used, and isolate externally exposed serial connectors from noise and ESD events.
推薦
IrDA Peripheral Interface
TUSB3410RHBT can serve as the USB-facing controller in IrDA-capable peripherals because IrDA is one of the device's explicitly supported serial functions. USB provides the connection to a host computer while the TUSB3410 manages the IrDA-facing behavior through firmware and the required external circuitry. The 32-pin VQFN package permits placement on compact surface-mounted boards, while four I/O lines can support peripheral control functions. Validate the optical or electrical IrDA transceiver interface, signal timing, and firmware state machine against the final peripheral design before production use.
推薦
USB-to-I2C Configuration Bridge
The TUSB3410RHBT supports USB, I2C, and UART functions in one controller, making it appropriate for a host-controlled bridge that accesses I2C peripherals from a USB host. The manufacturer startup description specifically identifies configuration data loaded from an I2C EEPROM, demonstrating the device's I2C integration path. Its 8052 core and 10 kB ROM provide a platform for enumeration and transfer tasks, while four I/O lines can supplement the serial interfaces. Design the I2C bus with the voltage levels and pull-up arrangement required by the selected peripherals, and include the external memory required by the intended configuration sequence.
推薦
Legacy Equipment USB Retrofit
TUSB3410RHBT is useful when an established instrument or controller already uses UART or IrDA and needs to be connected to a modern USB host. The controller preserves the serial interface while adding USB enumeration and host control through its integrated 8052 firmware platform. The compact 32-pin VQFN RHB package supports dense, surface-mounted retrofits, while the four I/O lines can handle auxiliary control functions. Successful integration depends on matching the legacy electrical levels, implementing the required protection network, and validating the host enumeration sequence and application protocol after the controller completes its 100 ms startup window.
推薦
USB Serial Console and Diagnostics
The TUSB3410RHBT can implement a compact USB serial console for embedded equipment requiring access to a UART-based diagnostic channel. A host can use USB for connection management while firmware routes console traffic through the controller's UART function. The 10 kB ROM and 8052 core are suited to a dedicated interface task, and the four I/O lines can provide status or reset-control functions. Designers should define boot behavior when the host is absent, account for the USB response requirement within 100 ms, and provide a connector implementation that avoids ground loops and exposes only the electrical levels intended by the target equipment.
推薦
推薦產品摘要
工程參考資料,適用於 TUSB3410RHBT — 比較、設計指引及合規資訊。
選型指南
與替代品比較
| 參數 | 本產品 | TUSB3410RHBR | TUSB3410RHBG4 |
|---|---|---|---|
| Brand | Texas Instruments | Texas Instruments | Texas Instruments |
| Package | 32-pin VQFN (RHB) | 32-pin VQFN (RHB) | 32-pin VQFN (RHB) |
| Core Processor | 8052 | 8052 | 8052 |
| Program Memory | 10 kB ROM | 10 kB ROM | 10 kB ROM |
| Number of I/O Lines | 4 | 4 | 4 |
| Interface Functions | UART, I2C, IrDA, and USB | UART, I2C, IrDA, and USB | UART, I2C, IrDA, and USB |
| Operating Temperature Range | 0°C to 70°C | 0°C to 70°C | 0°C to 70°C |
| Mounting Type | Surface mount | Surface mount | Surface mount |
| USB Response Readiness | Within 100 ms after reset and configuration loading | Within 100 ms after reset and configuration loading | Within 100 ms after reset and configuration loading |
主要差異化特點
- Combines four interface functions in one controller (對比TUSB3410RHBR)
- Matches the same 32-pin VQFN footprint (對比TUSB3410RHBG4)
- Provides a defined USB startup response target (對比TUSB3410RHBR)
設計說明
Implement the power rails and decoupling exactly as shown in the manufacturer application information, placing bulk and bypass capacitance close to the appropriate VQFN terminals. The 32-pin RHB package includes an exposed thermal pad whose electrical connection must follow the datasheet land pattern. Keep high-current USB return current close to its corresponding supply path so switching and enumeration transients do not disturb UART, I2C, or IrDA signaling.
Use the manufacturer package drawing to place the USB differential pair with continuous return-path geometry and minimize the distance from the controller to the connector. Keep the USB interface away from the UART, I2C, and IrDA routing where possible. The 32-pin VQFN footprint has closely spaced terminals, so inspect the PCB land pattern and exposed-pad connection during assembly review rather than deriving pad locations from another QFN device.
Do not treat USB enumeration as instantaneous. The device must leave reset, load any applicable I2C EEPROM configuration, and transfer execution within the manufacturer-stated 100 ms response window. Test cold reset, warm restart, missing EEPROM conditions, host re-enumeration, and simultaneous serial traffic. Also verify every terminal against the official pin table because the exposed pad and no-connect positions are package-specific.
Protect externally accessible UART and IrDA paths according to the electrical environment of the final product, and keep noisy power converters and high-speed clocks separated from sensitive serial routing. For I2C, select pull-up values for the bus voltage and capacitance while checking rise time against the slowest attached peripheral. Treat the USB differential pair as a controlled-impedance route when board geometry or cable exposure makes reflections likely.
合規資訊
Compliance status is not stated in the cited product information. Use the manufacturer datasheet and current declarations for the exact ordering code before making an environmental or automotive qualification claim.