Texas Instruments

TUSB7340RKMT - USB 3.0 4-Port xHCI Host Controller | Texas Instruments

MPN: TUSB7340RKMT ✗ 停產
1.1 V Vdss Plastic WQFN-100 with exposed pad Package
MOQ: 1 |

TUSB7340RKMT 概覽

The Texas Instruments TUSB7340RKMT is a SuperSpeed USB 3.0 four-port xHCI host controller that bridges a PCI Express host bus to as many as four downstream USB 3.0 ports, powered from 1.1 V core and 3.3 V I/O rails and housed in a 100-pin WQFN-MR (RKM) 9 x 9 mm surface-mount package.

An xHCI (eXtensible Host Controller Interface) host controller is the standardized silicon interface that allows a host processor to enumerate, configure and manage attached USB devices through a single register model rather than a legacy host-controller stack. In the device hierarchy, the TUSB7340RKMT is a USB interface IC, which is a subclass of interface IC within the broader integrated-circuit and semiconductor categories, and it is frequently placed alongside Type-C port controllers and USB hubs on the same board.

Key features include support for up to four downstream SuperSpeed USB 3.0 ports, a PCI Express device interface for host attachment, I2C configuration access, and dual-rail 1.1 V core / 3.3 V I/O operation. The RKM package exposes a thermal pad for improved heat spreading, and the device is offered in a commercial temperature grade as well as industrial-grade orderable variants sharing the identical 100-pin footprint.

Architecturally, the TUSB7340 family is designed so that the TUSB7320 and TUSB7340 devices share a pin-compatible 100-pin RKM package, so a design can move between a two-port and a four-port implementation without a PCB respin. The host-facing PCIe link, the UTMI/ULPI-style device-side PHY signalling, and the low-power 1.1 V core rail let the controller sit between the processor root complex and external USB connectors while keeping the number of external active components low.

Typical applications include docking stations and port-replicator designs, industrial human-machine interface panels, embedded servers and thin clients, test and measurement instrumentation, medical cart and diagnostic console hardware, and multi-display or multi-storage peripheral platforms where several SuperSpeed devices attach to one host.

When laying out the board, allocate a solid ground plane under the exposed thermal pad, place the 1.1 V and 3.3 V decoupling capacitors close to their supply pins, keep the PCIe reference-clock and differential pairs routed with matched impedance, and confirm the downstream port count against your cable and connector plan before committing to the footprint.

This page consolidates the TUSB7340 family documentation, package and pin-count details, drop-in replacement options in the same 100-pin RKM footprint, and practical layout guidance that is not collected in a single manufacturer document.

直接替換替代品,適用於 TUSB7340RKMT — 相同封裝,腳位對腳位相容。需重新設計 PCB 的不同封裝零件不列入。

此系列的變體

與下列產品可直接替換的同系列型號: TUSB7340RKMT (相同外形與佔位) — 差異在於 Number of Downstream Ports, Operating Temperature, Package, Technology, Device Type.

Texas Instruments
Number of Downstream Ports: 2
Operating Temperature: 0 °C to 70 °C
Package: 100-WQFN-MR (RKM) 9x9 mm
比較對象 TUSB7340RKMT →
Texas Instruments
Number of Downstream Ports: Up to 2 ports
Operating Temperature: 0°C to 70°C
Package: 100-WQFN dual rows with exposed pad
比較對象 TUSB7340RKMT →
Texas Instruments
Number of Downstream Ports: 4
Package: 100-WQFN-MR (RKM), 9x9 mm
Technology: CMOS
比較對象 TUSB7340RKMT →

TUSB7320RKMT

✅ 直接替換
Texas Instruments
📦 WQFN-100 (RKM)
USB 3.0 xHCI host controller · Up to 2 ports · USB 3.0 · PCIe x1 Gen 2 · 1.1 V and 3.3 V · 0°C to 70°C · 100-WQFN dual rows with exposed pad · RKM 100-pin WQFN

聯絡詢價

查看資料表 →

TUSB7320RKMR

✅ 直接替換
Texas Instruments
📦 WQFN-100 (RKM)
USB 3.0 xHCI Host Controller · 2 · SuperSpeed (5 Gbps), High/Full/Low Speed · PCIe x1 Gen 2 · 1.1 V and 3.3 V · 0 °C to 70 °C · 100-WQFN-MR (RKM) 9x9 mm · 100

聯絡詢價

查看資料表 →

TUSB7320IRKMR

✅ 直接替換
📦 WQFN-100 (RKM)
2 downstream ports vs 4 (-50% port count); industrial temperature grade versus commercial grade

📋 參考替代品(不在目錄中)

TUSB7340RKMR

✅ 直接替換
Texas Instruments
📦 WQFN-100 (RKM)
USB 3.0 xHCI host controller · 4 ports · USB 3.0 SuperSpeed with USB 2.0 backward compatibility · SuperSpeed, high-speed, full-speed, and low-speed · PCIe x1 Gen 2 · x1 · Gen 2 · 1.1 V

聯絡詢價

查看資料表 →

TUSB7340IRKMR

✅ 直接替換
📦 WQFN-100 (RKM)
Identical four-port silicon and identical 100-pin RKM footprint; industrial temperature grade replaces the commercial grade

📋 參考替代品(不在目錄中)

TUSB7340RKMT 規格

Device Type USB 3.0 xHCI SuperSpeed Host Controller (Line / Bus Controller)
Downstream Ports Up to 4 USB 3.0 ports
Host Bus Interface PCI Express (PCIe), 3.3 V I/O
Technology PCI, I2C, CMOS
Core Supply Voltage 1.1 V
I/O Supply Voltage 3.3 V
Reset Supply Voltage 1.1 V to 3.3 V
工作溫度 0 °C to +70 °C (32 °F to 158 °F), commercial grade
Package Type Plastic WQFN-100 with exposed pad
Package Code HVQCCN (RKM)
Package Dimensions 9 mm x 9 mm WQFN-MR
腳位數 100
Terminal Form No lead (surface mount)
安裝類型 Surface mount
Manufacturer Texas Instruments
生命週期狀態 NRND (not recommended for new designs; not EOL)
Datasheet Length 122 pages

TUSB7340RKMT 9 mm x 9 mm wqfn-mr 腳位配置指南

TUSB7340RKMT(9 mm x 9 mm wqfn-mr 封裝)的腳位配置。 腳位編號、功能與連接圖定義於製造商資料手冊中。請參閱該手冊以取得確切的封裝尺寸與焊接指引。

TUSB7340RKMT 的 9 mm x 9 mm wqfn-mr 封裝腳位圖

無詳細腳位定義資料: TUSB7340RKMT.

請參閱 資料表 以查看完整腳位配置。

典型應用

TUSB7340RKMT 適用於 6 應用s: USB 3.0 Docking Station and Port Replicator, Industrial Human-Machine Interface Panel, Embedded Server and Thin Client Storage Hub, Test and Measurement Instrumentation Front Panel, Medical Cart and Diagnostic Console, Multi-Display Kiosk and Video Wall Controller.

🔌

USB 3.0 Docking Station and Port Replicator

The TUSB7340RKMT is the natural host-side device for a docking station because a single PCIe link can drive four SuperSpeed downstream ports from one controller. A typical implementation places the controller between the host root complex and four USB 3.0 Type-A or Type-C receptacles, with the 1.1 V core rail and 3.3 V I/O rail regulated locally and the exposed pad tied to a solid ground plane. The benefit is deterministic four-port enumeration from a single host port; the trade-off is that the device is NRND, so docking stations built today should evaluate the current-generation SuperSpeed host controllers as well, while existing dock designs remain fully supported on the same 100-pin RKM footprint.

🏭

Industrial Human-Machine Interface Panel

Industrial HMIs and operator panels often need to serve several USB peripherals - barcode scanners, printers, removable media and service laptops - from a single embedded CPU. The TUSB7340RKMT provides four downstream SuperSpeed USB 3.0 ports through one PCI Express device interface, which keeps the host-side PCIe lane count on an embedded board to one while the internal I/O runs at 3.3 V and the core at 1.1 V. Because the commercial-grade TUSB7340RKMT is rated 0 °C to +70 °C, industrial cabinets with wider internal temperature ranges should be built with the industrial-grade member of the same 100-pin RKM family, which shares the footprint and the same PCIe and supply architecture.

🖥️

Embedded Server and Thin Client Storage Hub

Storage-heavy embedded platforms - mini servers, thin clients, network appliances - need several SuperSpeed links to NVMe-style enclosures, USB-to-SATA bridges and RAID arrays. Using the TUSB7340RKMT, a single xHCI host controller fans four downstream SuperSpeed ports out of the PCIe root complex, which reduces the number of discrete USB controllers on the board and therefore reduces PCB area and host-side driver complexity. The design consideration is thermal and layout discipline: the 100-pin WQFN-MR package conducts most of its heat through the exposed pad, so a full ground plane under the device is needed, and the 1.1 V core rail must be clean because it feeds the internal PHY and logic block.

🧪

Test and Measurement Instrumentation Front Panel

Bench instrumentation front panels frequently expose multiple USB connections for probes, memory sticks and data acquisition modules, and they are typically driven by a PC-class host over PCIe. The TUSB7340RKMT fits this use because it accepts the 1.1 V core and 3.3 V I/O rails used in instrument power trees and exposes four SuperSpeed downstream ports on the same 100-pin RKM footprint that appears in the family documentation. The trade-off is lifecycle: since the family is NRND with posted errata and limited software support, new instrument platforms should evaluate current SuperSpeed host controllers, while repair and sustaining programs for deployed instruments can continue to use the TUSB7340RKMT without layout changes.

💊

Medical Cart and Diagnostic Console

Diagnostic carts and clinical consoles must accept several USB peripherals - analysers, barcodes, printers and imaging accessories - while preserving a clean separation between the operator console and the host controller. The TUSB7340RKMT provides four SuperSpeed downstream ports behind a single PCIe host interface, so one controller covers a console built around a compact embedded board instead of four separate host controllers. The 3.3 V I/O rail and 1.1 V core rail are typical of medical instrument power trees, and the commercial 0 °C to +70 °C grade suits controlled indoor carts; for carts deployed where the internal ambient swings wider, the industrial-grade orderable variant in the same footprint is the appropriate choice.

📺

Multi-Display Kiosk and Video Wall Controller

Kiosks and video wall controllers often need to expose multiple USB SuperSpeed ports to cameras, capture cards and touch overlays while the display path is handled elsewhere on the board. The TUSB7340RKMT handles the host-side USB enumeration and traffic routing through one PCI Express device interface, leaving the display pipeline free, and its four downstream ports are configured through the same I2C/PCIe control path. The key layout consideration in this application is that high-speed differential USB and PCIe routing must be kept away from the exposed pad region and from switching regulators, since the 1.1 V core rail feeding the PHY is sensitive to supply ripple and reference-clock jitter.

What is the TUSB7340RKMT?
The TUSB7340RKMT is a Texas Instruments SuperSpeed USB 3.0 xHCI host controller that connects a PCI Express host system to as many as four downstream USB 3.0 ports. According to the TUSB73x0 family datasheet, it supports up to four downstream ports, uses a 1.1 V core rail with a 3.3 V I/O rail, and is offered in a 100-pin WQFN-MR (RKM) 9 x 9 mm package. It is the four-port member of the TUSB73x0 xHCI family.
How many downstream USB 3.0 ports does the TUSB7340RKMT support?
The TUSB7340RKMT supports up to four downstream SuperSpeed USB 3.0 ports. The manufacturer product page describes it as a SuperSpeed USB 3.0 four-port xHCI host controller, while the TUSB7320 in the same family supports only two downstream ports. Because both devices use the same pin-compatible 100-pin RKM package, a board can be re-spun with a different port count without changing the footprint.
What host interface does the TUSB7340RKMT use to attach to the processor?
The TUSB7340RKMT attaches to the host processor through a PCI Express (PCIe) device interface running at 3.3 V I/O levels. According to the TUSB7340 datasheet, the controller also exposes I2C for configuration access, and its listed technology is PCI, I2C and CMOS. The PCIe link carries xHCI register and DMA traffic between the root complex and the device-side USB PHY.
What supply voltages does the TUSB7340RKMT require?
The TUSB7340RKMT requires a 1.1 V core supply and a 3.3 V I/O supply, with reset handling supported across the same 1.1 V to 3.3 V range. Distributor listings for this MPN list a minimum supply voltage of 1.1 V and a maximum of 3.3 V, and identify the device as a 3.3 V CMOS interface IC. Both rails need local decoupling close to their supply pins.
What package and pin count does the TUSB7340RKMT use?
The TUSB7340RKMT is supplied in a 100-pin WQFN-MR package identified as RKM / HVQCCN, measuring 9 mm by 9 mm with an exposed thermal pad and no-lead terminals. According to the Texas Instruments product listing, the device is a 100-pin surface-mount package; the RKM package code corresponds to the 100-pin WQFN body used across the TUSB73x0 family.
What is the operating temperature range of the TUSB7340RKMT?
The TUSB7340RKMT is rated from 0 °C to +70 °C (32 °F to 158 °F) as a commercial-grade part, according to its distributor specification listing, which also lists the temperature grade as commercial. For extended-temperature industrial requirements, orderable industrial-grade members of the same 100-pin RKM footprint are available in the TUSB73x0 family.
Is the TUSB7340RKMT still active, and what is its lifecycle status?
The TUSB7340 and TUSB7320 are not end-of-life but are NRND, meaning not recommended for new designs, because they support older USB specifications, carry posted errata, and have very limited software support. That status is confirmed in Texas Instruments E2E interface-group responses. New SuperSpeed designs should evaluate current-generation host controllers, while existing boards can keep the TUSB7340RKMT.
Where can I download the TUSB7340RKMT datasheet PDF?
The manufacturer datasheet for the TUSB73x0 family, which includes the TUSB7340, is reached from the Texas Instruments product page at ti.com/product/TUSB7340, and the device datasheet PDF is 122 pages long. The same document is mirrored on the TI product page and is titled TUSB73x0 USB 3.0 xHCI Host Controller. Use the pin-description and electrical-tables sections when assigning PCB tracks.
Where do I find the TUSB7340RKMT pinout and footprint?
The TUSB7340RKMT pin list and land pattern are published in the TUSB73x0 datasheet on the Texas Instruments product page, which describes the 100-pin RKM package. Because this controller exposes an exposed thermal pad and 100 fine-pitch perimeter pins, use the manufacturer-supplied land pattern rather than a generic QFN-100 drawing, and confirm the exposed-pad connection to ground on your PCB stack-up.
TUSB7340RKMT vs TUSB7320RKMT - which is better for a four-port design?
Choose the TUSB7340RKMT for four downstream USB 3.0 ports and the TUSB7320RKMT for two. According to the TI product page, both devices are available in a pin-compatible 100-pin RKM package, so the decision is a port-count and firmware-support choice rather than a layout change. The TUSB7340 adds two downstream ports at the same supply rails and PCIe interface.
What is the best drop-in replacement for the TUSB7340RKMT?
The best drop-in options are the same-family Texas Instruments members in the identical 100-pin RKM footprint: the TUSB7340RKMR for reel packaging of the same four-port device, and the TUSB7320RKMT and TUSB7320RKMR, which are documented as pin-compatible two-port devices in the same package. For a four-port design, the TUSB7340RKMR is the closest functional replacement.
Can the TUSB7320RKMT replace the TUSB7340RKMT in an existing design?
Yes, the TUSB7320RKMT can replace the TUSB7340RKMT on the same PCB footprint because Texas Instruments documents both parts in a pin-compatible 100-pin RKM package. The functional trade-off is port count: the TUSB7320 supports up to two downstream ports versus four for the TUSB7340, so existing four-port cables and connectors would need reassignment and the enumeration configuration must be updated.
When should I choose the TUSB7340RKMT over the TUSB7320RKMT?
Choose the TUSB7340RKMT when the design must expose more than two SuperSpeed USB 3.0 downstream ports from a single PCIe host connection, such as a docking station serving multiple storage, display and network peripherals. Choose the TUSB7320RKMT when two ports are sufficient, since it reduces enumeration and PHY complexity while keeping the same 100-pin RKM footprint and supply rails.
Is the TUSB7340RKMT suitable for industrial equipment and docking stations?
The TUSB7340RKMT is used in industrial and embedded USB host designs because it delivers four SuperSpeed ports from a single PCIe interface and accepts both 1.1 V core and 3.3 V I/O rails. For a commercial-temperature enclosure the device is rated 0 °C to +70 °C, so industrial cabinets with wider internal temperature ranges should use the industrial-grade member of the same RKM family.
Where can I buy the TUSB7340RKMT and what is the lead time?
The TUSB7340RKMT is ordered through the Request a Quote form on this page, where stock status, quantity breaks and the current lead time are confirmed for your exact MPN and packing code. Because the device is NRND rather than end-of-life, supply is normally maintained for existing designs, and the 100-pin RKM package is a standard orderable configuration.
What are the key specifications of the TUSB7340RKMT that engineers should know?
The key specifications of the TUSB7340RKMT are: four downstream SuperSpeed USB 3.0 ports, a PCI Express host interface with I2C configuration access, a 1.1 V core and 3.3 V I/O supply requirement, a commercial 0 °C to +70 °C temperature grade, and a 100-pin WQFN-MR (RKM) 9 x 9 mm package with an exposed pad. Lifecycle is NRND, so it is suited to maintaining existing designs rather than new platform builds.
What is the best competitor equivalent for the TUSB7340RKMT?
The closest documented equivalent for the TUSB7340RKMT is Texas Instruments' own TUSB7320RKMT, which the manufacturer describes as pin-compatible in the same 100-pin RKM package and which distributor comparison listings describe as a complete replacement for the same terminals and package, differing mainly in downstream port count. Any cross-brand substitution must be confirmed for PCIe lane assignment, xHCI register compatibility and 1.1 V/3.3 V rail sequencing with the vendor.

工程參考資料,適用於 TUSB7340RKMT — 比較、設計指引及合規資訊。

選型指南

Choose the TUSB7340RKMT when a design needs more than two SuperSpeed USB 3.0 downstream ports from one PCI Express host connection - docking stations, industrial HMIs and storage appliances are typical cases - and when sustaining an existing 100-pin RKM layout matters most. Choose the TUSB7340RKMR when the same four-port silicon is required in reel packing for volume production; it is electrically identical to the TUSB7340RKMT. Choose the TUSB7340IRKMR when the enclosure internal ambient exceeds the 0 °C to +70 °C commercial range, since it shares the footprint. Choose the TUSB7320RKMT or TUSB7320RKMR when two downstream ports are enough, as the two-port part reduces enumeration and PHY complexity while keeping the same footprint and supply rails. For all of these options, remember the family is NRND rather than end-of-life: new platforms should also evaluate current-generation SuperSpeed host controllers, while existing and repair designs stay fully supported.

與替代品比較

參數 本產品 TUSB7320RKMT TUSB7320RKMR TUSB7320IRKMR TUSB7340RKMR TUSB7340IRKMR
Package WQFN-100 (RKM, HVQCCN), 9 mm x 9 mm WQFN-100 (RKM) - same WQFN-100 (RKM) - same WQFN-100 (RKM) - same WQFN-100 (RKM) - same WQFN-100 (RKM) - same
Brand Texas Instruments Texas Instruments Texas Instruments Texas Instruments Texas Instruments Texas Instruments
Downstream USB 3.0 Ports Up to 4 Up to 2 Up to 2 Up to 2 Up to 4 Up to 4
Host Bus Interface PCI Express (PCIe), 3.3 V I/O PCI Express (PCIe), 3.3 V I/O PCI Express (PCIe), 3.3 V I/O PCI Express (PCIe), 3.3 V I/O PCI Express (PCIe), 3.3 V I/O PCI Express (PCIe), 3.3 V I/O
Supply Voltage 1.1 V core / 3.3 V I/O 1.1 V core / 3.3 V I/O 1.1 V core / 3.3 V I/O 1.1 V core / 3.3 V I/O 1.1 V core / 3.3 V I/O 1.1 V core / 3.3 V I/O
Technology PCI, I2C, CMOS PCI, I2C, CMOS PCI, I2C, CMOS PCI, I2C, CMOS PCI, I2C, CMOS PCI, I2C, CMOS
Pin Count 100 pins 100 pins 100 pins 100 pins 100 pins 100 pins
Lifecycle Status NRND - not EOL NRND - not EOL NRND - not EOL NRND - not EOL NRND - not EOL NRND - not EOL
Packing Form Tape and reel Tape and reel Reel Reel Reel Reel

主要差異化特點

  • Four downstream SuperSpeed ports from a single PCIe host link (對比TUSB7320RKMT)
  • Identical four-port silicon available in reel packing for volume programs (對比TUSB7340RKMR)
  • Industrial temperature option on the same footprint (對比TUSB7340RKMT)
  • Pin-compatible family architecture across port counts (對比TUSB7320IRKMR)

設計說明

The TUSB7340RKMT runs from a 1.1 V core rail and a 3.3 V I/O rail, and both rails feed internal PHYs and logic. Place the low-ESR ceramic decoupling capacitors directly at the supply pins, keep the 1.1 V core loop area minimal and free of return-current detours, and power the core rail from a low-noise source rather than from the same converter branch that drives downstream port current. Sequencing of the two rails should follow the reset requirements described in the TUSB73x0 datasheet.

With 100 perimeter pins in a 9 mm x 9 mm WQFN-MR body, the exposed pad is the primary heat path. Tie the pad to a low-impedance ground plane on the top layer and stitch it to inner ground layers with vias close to the pad, and avoid placing the device against a noisy regulator or a hot processor in the layout. Estimated junction rise is proportional to dissipation times the package thermal resistance, so treat the pad connection as mandatory rather than optional.

Route the PCIe reference clock and the SuperSpeed differential pairs as controlled-impedance, length-matched pairs with no stubs, and keep them isolated from the 3.3 V I/O switching nodes of external regulators. Provide a solid uninterrupted ground reference beneath the entire 100-pin footprint so that return paths for the high-speed lanes are continuous. Use the manufacturer land pattern for the exposed-pad geometry rather than a generic 100-pin QFN drawing.

Do not assume the device is an active new-design choice: the TUSB7340 and TUSB7320 are NRND, carry posted errata and have very limited software support, so check the errata list and the available host driver stack before committing. Because the four-port and two-port members share the 100-pin RKM package, also verify that your port mapping, connector assignments and enumeration configuration are updated if you move between them.

合規資訊

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
無鉛
Unknown
無鹵
Unknown
衝突礦產
Unknown

No RoHS, REACH, lead-free or conflict-minerals statements appear in the available product, distributor or datasheet-index entries; consult the manufacturer product page for the current compliance declarations. AEC-Q100 does not apply to this general-purpose commercial/industrial interface controller.

資料驗證日期: 2026-11-16 — 資料由 XAIPART 元件工程團隊驗證及整理

相關搜尋

TUSB7340RKMT TUSB7340RKMT datasheet TUSB7340 datasheet pdf TUSB7340 pinout TUSB7340RKMT footprint Texas Instruments TUSB7340RKMT TUSB7340 equivalent TUSB7340 replacement TUSB7340 vs TUSB7320 TUSB7340 4 port xHCI host controller TUSB7340 WQFN-100 RKM package TUSB7340RKMT price TUSB7340RKMT stock and lead time TUSB7340 docking station host controller

相關元件與詞彙

Texas Instruments TUSB7340RKMT TUSB7340 TUSB7320RKMT TUSB7320RKMR TUSB7320IRKMR TUSB7340RKMR TUSB7340IRKMR TUSB8020BPHP TUSB2077APTR TUSB4041IPAP LAN9730-ABZJ-TR xHCI eXtensible Host Controller Interface USB 3.0 SuperSpeed USB PCI Express USB interface IC interface IC semiconductor WQFN-100 RKM package QFN family surface mount exposed pad 1.1 V core rail 3.3 V I/O rail downstream ports NRND
快速報價 RFQ
請填寫完整詳細資料 — 我們的業務團隊將於 24 小時內回覆
料號 製造商 封裝 QTY 目標價格 小計
✓
報價已提交!

我們將於 24 小時內回覆您的電子郵件

1
詢價已提交
2
已收到報價
3
已下單
4
付款
5
已出貨
6
已送達
檢視詢價單詳情