VSC8531XMW-04 - 10/100 Ethernet PHY | Microchip
MPN: VSC8531XMW-04 ✓ 啟用中VSC8531XMW-04 概覽
An Ethernet physical-layer transceiver, or copper PHY, is the analog and digital interface between a network controller and twisted-pair cabling. It belongs to the broader network-interface hierarchy: Ethernet controller, Ethernet interface, network interface IC, and semiconductor. Unlike a media-access controller that processes higher-layer packets, a copper PHY handles line signaling, clock recovery, signal conditioning, auto-negotiation, and link establishment.
Key device characteristics include support for IEEE 802.3az Energy Efficient Ethernet, Wake-on-LAN functionality, broad LVCMOS I/O support, and a single-row 48-QFN package. The 6 mm by 6 mm footprint saves board area compared with larger Ethernet PHY packages while retaining support for common 10/100 Ethernet interfaces. The VSC8531 family is specifically positioned for low-power, small-form-factor designs where board space is constrained.
The -04 ordering suffix identifies the exact configuration offered under VSC8531XMW-04. Device-specific operating details, including exact speed options, transceiver media interfaces, voltage rails, temperature range, and clock requirements, should be confirmed against the manufacturer datasheet before schematic capture or PCB release. This distinction is important because similarly named VSC8531 order codes may differ in temperature grade, configuration, or production attributes while retaining the family-level package description.
Typical applications include compact industrial Ethernet terminals, access-point equipment, embedded network controllers, print servers, set-top equipment, and other products that need a 10/100 copper Ethernet connection without allocating a large board footprint. The low-power and small-package positioning also makes the family suitable for space-sensitive consumer and communications equipment. Wake-on-LAN can support remote network wake-up functions, while Energy Efficient Ethernet can reduce link energy use when traffic is light.
PCB design should reserve the complete 48-QFN land pattern, confirm the exposed-pad connection and thermal strategy, and place the PHY close to the Ethernet transformer or connector. Differential pairs should be routed as controlled-impedance nets with minimal stubs and symmetry. Decoupling and clock networks must follow the manufacturer’s recommended reference layout because an Ethernet PHY’s margin depends on clean power, low-noise clocks, and controlled magnetics-to-PHY signal integrity.
This product page consolidates the manufacturer’s VSC8531 positioning, package information, and sourcing details with practical interface and layout guidance. It also identifies where engineers must consult the exact VSC8531XMW-04 datasheet for revision-specific electrical limits, pin assignments, ordering information, and design checklists.
直接替換替代品,適用於 VSC8531XMW-04 — 相同封裝,腳位對腳位相容。需重新設計 PCB 的不同封裝零件不列入。
此系列的變體
與下列產品可直接替換的同系列型號: VSC8531XMW-04 (相同外形與佔位) — 差異在於 Package, Product Type, MAC Interface, Port Count, RoHS Status.
VSC8531XMW
✅ 直接替換聯絡詢價
查看資料表 →VSC8531XMW-04 規格
| Product Type | Single-port copper Ethernet PHY |
| Manufacturer | Microchip Technology |
| Ethernet Standard | IEEE 802.3az Energy Efficient Ethernet |
| Wake-on-LAN Support | Supported |
| I/O Logic Type | LVCMOS |
| Port Count | 1 port |
| Media Interface | Copper Ethernet |
| 封裝 | 48-QFN (6 mm x 6 mm) |
| 安裝類型 | Surface mount |
| RoHS 狀態 | unknown |
| REACH Status | unknown |
| AEC-Q100 Qualification | unknown |
VSC8531XMW-04 48-qfn (6 mm x 6 mm) 腳位配置指南
VSC8531XMW-04(48-qfn (6 mm x 6 mm) 封裝)的腳位配置。 腳位編號、功能與連接圖定義於製造商資料手冊中。請參閱該手冊以取得確切的封裝尺寸與焊接指引。
無詳細腳位定義資料: VSC8531XMW-04.
請參閱 資料表 以查看完整腳位配置。
典型應用
VSC8531XMW-04 適用於 6 應用s: Compact Industrial Ethernet Terminal, Network Access Point Equipment, Print Server and Embedded Networking, Remote-Managed Communications Equipment, Low-Power Consumer Ethernet Product, Set-Top and Media Network Interface.
Compact Industrial Ethernet Terminal
The VSC8531XMW-04 fits compact industrial Ethernet terminals where board area is limited but a dedicated copper-network interface is required. Its 48-QFN package measures only 6 mm by 6 mm, allowing the PHY to sit close to the transformer and connector rather than consuming space around a larger multi-pin package. IEEE 802.3az Energy Efficient Ethernet is useful when the equipment spends substantial time at low utilization, while Wake-on-LAN supports remote maintenance and recovery. Before layout release, confirm the -04 suffix configuration, supported data rate, supply rails, clock requirements, and operating temperature against the exact manufacturer datasheet. The final design should also use the recommended reference layout for decoupling, controlled-impedance differential routing, and exposed-pad thermal management.
推薦
Network Access Point Equipment
The VSC8531XMW-04 can provide a copper Ethernet front end for compact access-point and network-edge equipment. Its small 6 mm by 6 mm 48-QFN footprint preserves routing and component-placement area in dense systems, while broad LVCMOS support simplifies integration with a compatible Ethernet MAC. IEEE 802.3az Energy Efficient Ethernet can reduce link power when traffic is intermittent, making the family useful in equipment expected to remain connected continuously. Wake-on-LAN also supports remote activation and maintenance workflows. Engineers should confirm whether the -04 ordering option supports the required speed, temperature range, and qualification level, and should preserve the manufacturer’s recommended separation and return path between the PHY, clock source, supply network, and Ethernet magnetics.
推薦
Print Server and Embedded Networking
The VSC8531XMW-04 is suitable for print servers, embedded gateways, and other compact products that need a wired Ethernet connection alongside a host processor. The single-port copper PHY can be paired with an Ethernet-capable controller, while the 48-QFN footprint simplifies high-density board placement near an RJ45 or magnetics section. Low-power positioning is beneficial in continuously connected embedded equipment, and Energy Efficient Ethernet can reduce power when link traffic is light. The implementation must match the host controller’s data interface, clocking, and reset expectations exactly. Verify the -04 configuration, supported data rates, supply voltage, and reset behavior in the exact datasheet, and use the manufacturer reference layout to minimize clock crosstalk and Ethernet differential-pair loss.
推薦
Remote-Managed Communications Equipment
The VSC8531XMW-04 supports remote-managed communications equipment because Wake-on-LAN can detect qualified network signaling while the device remains connected to a copper network. The feature is useful in remote monitoring, access, and industrial communications products that benefit from remote wake-up or maintenance functions. Energy Efficient Ethernet provides an additional power-management path for lightly loaded links, and the 6 mm by 6 mm package simplifies integration into compact enclosures. Signal-integrity performance depends on correct implementation rather than package size alone, so place the PHY near the transformer and connector, preserve symmetric controlled-impedance routing, and follow the recommended clock and decoupling layout. Confirm the -04 suffix configuration and all timing, voltage, and temperature requirements before production use.
推薦
Low-Power Consumer Ethernet Product
The VSC8531XMW-04 can serve compact consumer and prosumer products that require wired Ethernet but have limited PCB area. The single-row 48-QFN package occupies a 6 mm by 6 mm area, enabling short connections between the PHY and Ethernet magnetics while preserving space for application-specific circuitry. Energy Efficient Ethernet is particularly relevant for products that maintain a network link but exchange data intermittently, and Wake-on-LAN can assist remote recovery workflows. Consumer designs should still validate EMC margin, magnetics selection, return-loss behavior, and thermal performance. Use the manufacturer’s recommended component placement and layer stackup, confirm the exact -04 ordering attributes, and verify operating-temperature and lifecycle requirements rather than relying on family-level descriptions alone.
推薦
Set-Top and Media Network Interface
The VSC8531XMW-04 fits set-top and media-device platforms that need a compact wired-network connection for media transfer, management, or service access. Its low-power copper-PHY design and small 48-QFN footprint allow placement near the network connector, while Energy Efficient Ethernet can reduce power consumption during periods of low network traffic. The device should be paired with a compatible host MAC and standard Ethernet magnetics, with careful attention to clock jitter, supply noise, and differential-pair routing. Verify the exact -04 speed and interface configuration in the manufacturer ordering information. During PCB layout, follow the reference design for exposed-pad connection and component placement, keep return paths continuous, and test return loss and link margins across cable lengths and temperature corners.
推薦
推薦產品摘要
工程參考資料,適用於 VSC8531XMW-04 — 比較、設計指引及合規資訊。
選型指南
與替代品比較
| 參數 | 本產品 | VSC8531XMW |
|---|---|---|
| Brand | Microchip Technology | Microchip Technology |
| Package | 48-QFN (6 mm x 6 mm) | 48-QFN (6 mm x 6 mm) |
| Product Type | Single-port copper Ethernet PHY | Ethernet interface IC |
| Energy Efficient Ethernet | IEEE 802.3az supported | IEEE 802.3az supported at family level |
| Wake-on-LAN | Supported | Supported at family level |
| I/O Logic | LVCMOS with wide voltage support | LVCMOS with wide voltage support at family level |
| Body Size | 6 mm x 6 mm | 6 mm x 6 mm |
| Exact Suffix Configuration | -04 ordering option | Base family ordering option; difference not quantified |
主要差異化特點
- Compact single-row package (對比VSC8531XMW)
- Power-management feature set (對比VSC8531XMW)
- Remote-wake capability (對比VSC8531XMW)
- Processor interface flexibility (對比VSC8531XMW)
設計說明
Place the VSC8531XMW-04 near the Ethernet transformer or connector and follow the manufacturer’s 48-QFN reference layout. Route the differential pairs as controlled-impedance nets, preserve symmetry, minimize stubs, and maintain a continuous return path beneath the pair. Keep clocks and high-speed traces separated from the analog and differential routing where practical. Validate the stackup-dependent impedance because a mechanically correct footprint can still produce unacceptable Ethernet return loss when trace geometry is uncontrolled.
Use the supply-network and decoupling arrangement shown in the exact VSC8531XMW-04 datasheet. Place required capacitors close to their designated pins, keep the exposed-pad connection consistent with the land pattern, and provide adequate copper for thermal dissipation. Check the clock source’s amplitude, jitter, noise isolation, and startup sequencing against the device requirements; these timing and supply conditions can be as important as nominal voltage accuracy for establishing a reliable link.
Treat the PHY-to-magnetics path as a controlled transmission-line section. Verify differential impedance, pair-length balance, via transitions, return-loss performance, and isolation from clocks and switching power nodes across the required temperature range. If the PCB requires a layer transition or connector insertion, use the manufacturer’s reference geometry where possible and validate the completed assembly with Ethernet compliance or link-margin testing rather than relying only on simulation.
Do not assume that the base VSC8531XMW is an exact replacement for VSC8531XMW-04 solely because both use the same package. Review the ordering table for configuration, temperature, qualification, clocking, and production-status differences, then compare every electrical limit and pin function. Likewise, do not select a magnetics component without confirming its impedance, turns ratio, common-mode characteristics, and isolation requirements against the exact PHY operating conditions.
合規資訊
The manufacturer product-page summary does not state RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals status. Confirm these attributes using the exact VSC8531XMW-04 product documentation and material declarations before regulatory release.