W78E051B40FL - 40MHz 8051 MCU, 4KB Flash | Nuvoton
MPN: W78E051B40FL ✗ 停產W78E051B40FL 概覽
An 8051 microcontroller is an embedded processing platform that combines a CPU core, program memory, data memory, parallel I/O ports, timers, serial interfaces, and interrupt-control logic on one integrated circuit. The W78E051B40FL belongs to the 8-bit microcontroller hierarchy, where its standard 8051-compatible instruction set supports compact control systems, industrial controllers, data-acquisition modules, and embedded accessories.
The principal device characteristics include 4KB of Flash EPROM, 128 bytes of internal RAM, four 8-bit bidirectional and bit-addressable I/O ports, and an additional 4-bit P4 port. Two 16-bit timer/counter blocks support timing, event counting, and periodic control tasks. Its operating speed reaches 40MHz, allowing the core to execute control sequences more quickly than the lower-clock members of the same 8051 family.
The W78E051B series retains compatibility with the standard 8051 instruction set while using Flash rather than a one-time-programmable architecture. That combination preserves familiar compiler and assembly-code compatibility and supports firmware updates where the system's programming process permits reprogramming. The 128-byte RAM is modest, so designs requiring substantial buffers should use external data memory and divide work between the MCU and external components.
Typical uses include industrial control panels, motor and relay controllers, instrumentation interfaces, sensor hubs, programmable logic controllers, communications modules, and compact embedded products. The 36 available I/O lines make the device suitable for systems that need multiple digital inputs and outputs, while the 40MHz clock provides additional execution margin for protocol handling and coordinated peripheral activity.
The main design constraint is memory capacity. Firmware must fit within the 4KB program-memory limit, and frequently used variables should remain within the 128-byte RAM space. Board designers should also preserve a defined reset and oscillator implementation, validate every port's direction and pull configuration, and confirm the exact pin assignment and electrical limits against the manufacturer datasheet before layout release.
This product page consolidates the W78E051B40FL's principal specifications, lifecycle information, package characteristics, replacement constraints, comparison data, and practical design guidance. It also distinguishes verified same-footprint options from broader 8051 alternatives that require additional engineering review.
直接替換替代品,適用於 W78E051B40FL — 相同封裝,腳位對腳位相容。需重新設計 PCB 的不同封裝零件不列入。
此系列的變體
與下列產品可直接替換的同系列型號: W78E051B40FL (相同外形與佔位) — 差異在於 Number of I/O Lines, Package Type.
W78C438C40FL
✅ 直接替換聯絡詢價
查看資料表 →W78E051B40FL 最大額定值與電氣特性
| Product Type | 8-bit Microcontroller |
| CPU Core | 8051-compatible |
| Core Width | 8 bit |
| Maximum Clock Speed | 40 MHz |
| Program Memory Size | 4 KB (4K x 8) |
| Program Memory Type | Flash EPROM |
| RAM Size | 128 bytes (128 x 8) |
| Number of I/O Lines | 36 lines |
| Port Configuration | Four 8-bit bidirectional ports plus one 4-bit P4 port |
| Timer/Counter Count | 2 |
| Timer/Counter Resolution | 16 bit |
| 封裝 | 44-pin BQFP |
| Package Type | 44-pin PQFP |
| 安裝類型 | Surface Mount |
| 生命週期狀態 | Obsolete |
| RoHS 狀態 | Yes |
W78E051B40FL 44-pin pqfp 腳位配置指南
W78E051B40FL(44-pin pqfp 封裝)的腳位配置。 此數位 IC 包含 GPIO、通訊介面(UART、SPI、I2C)與電源腳位。替代腳位功能與配置選項請參閱製造商資料表。對嵌入式系統設計與 PCB 佈局至關重要。
無詳細腳位定義資料: W78E051B40FL.
請參閱 資料表 以查看完整腳位配置。
典型應用
W78E051B40FL 適用於 6 應用s: Industrial Control Panel, Motor and Relay Controller, Sensor Interface Hub, Programmable Logic Controller, Instrumentation Interface, Communications Controller.
Industrial Control Panel
The W78E051B40FL fits compact control panels that use discrete inputs and outputs rather than a large application processor. Its 36 I/O lines can distribute digital connections among four 8-bit bidirectional ports and the additional 4-bit P4 port, while the 40MHz 8051 core handles sequencing and control logic. Two 16-bit timer/counters can support timing, counting, or periodic output tasks. The main limitation is the 4KB Flash and 128-byte RAM footprint, so the firmware should remain compact and high-speed peripherals should remain external. For a new platform, verify lifecycle continuity before committing the design.
Motor and Relay Controller
The W78E051B40FL can coordinate relays, solenoids, indicators, and interlocks in a small motor-control or sequencing module. The 36 available I/O lines reduce the need for large amounts of external logic, and the two 16-bit timer/counters are useful for pulse timing, event counting, or debounced control intervals. Its 40MHz clock also provides execution margin for coordinating commands with feedback inputs. The MCU should not directly drive inductive loads; use appropriate transistor, flyback, isolation, and protection circuits. Firmware size must remain below the 4KB program-memory capacity.
Sensor Interface Hub
The W78E051B40FL is useful as a compact acquisition and routing hub for digital sensors, limit switches, encoders, and simple alarm inputs. Its 36 I/O lines allow multiple sensor channels to be sampled or distributed without a large bus controller, while the 8051-compatible core can implement debouncing, filtering, status tracking, and communication formatting. With only 128 bytes of RAM, records should be streamed or processed immediately rather than accumulated in large buffers. The 40MHz operating speed gives useful timing margin, but system-level accuracy still depends on external sensors, signal conditioning, and careful grounding.
Programmable Logic Controller
The W78E051B40FL can serve as the central controller in a small PLC or fixed-function automation module because it combines an 8051-compatible core, 36 I/O lines, and two 16-bit timers in one device. Timer resources can produce periodic or captured timing signals, while the parallel ports support discrete field wiring through suitable interface electronics. Software compatibility with standard 8051 tools simplifies migration of simple control code. Designers should avoid unnecessary dynamic allocation, keep stack depth modest, and test all interrupt timing under worst-case I/O activity. The 4KB Flash limit makes this approach best for compact, deterministic control tasks.
Instrumentation Interface
The W78E051B40FL can act as the low-level interface between sensors, switches, display signals, and a higher-level communications device in compact instrumentation. Its 36 digital I/O lines support status reporting and control signals, while the 40MHz core can execute protocol framing, debounce logic, and command handling alongside timer-based measurement tasks. The limited 128-byte RAM favors streaming and state-machine architectures over buffering large datasets. Analog measurement and precision signal conditioning require external components, with the MCU responsible primarily for control, configuration, and digital communication.
Communications Controller
The W78E051B40FL is applicable to simple serial-device nodes, protocol converters, and command routers built around an 8051-compatible architecture. Its 40MHz clock provides additional timing margin for character handling and state-machine logic, while the bidirectional ports support peripheral selection, status signaling, and interrupts. The MCU can coordinate an external UART or dedicated communications IC rather than relying on unspecified on-chip serial resources. Firmware must be designed around the 4KB program-memory and 128-byte RAM limits, and each replacement should be checked for exact peripheral mapping and startup behavior.
工程參考資料,適用於 W78E051B40FL — 比較、設計指引及合規資訊。
選型指南
與替代品比較
| 參數 | 本產品 | W78C438C40FL |
|---|---|---|
| Brand | Nuvoton Technology Corporation | Nuvoton Technology Corporation |
| Package | 44-BQFP | 44-PQFP; verify exact mechanical drawing |
| CPU Core | 8051 | 8051 |
| Core Width | 8 bit | 8 bit |
| Maximum Speed | 40 MHz | 40 MHz |
| Connectivity | EBI/EMI and UART/USART | EBI/EMI and UART/USART |
| Lifecycle Status | Obsolete | Not For New Designs |
| Packaging | Tray | Tray |
主要差異化特點
- Known 4KB Flash and 128-byte RAM configuration (對比W78C438C40FL)
- Documented 36-line parallel I/O configuration (對比W78C438C40FL)
- Two dedicated 16-bit timing channels (對比W78C438C40FL)
設計說明
Treat the 4KB Flash and 128-byte RAM limits as hard design constraints. Keep the program below the device's program-memory capacity, avoid large static tables, and use external memory only where the board and device support it. Minimize stack depth and interrupt nesting because the RAM budget is small. Before substituting any 8051 device, rebuild the memory map and verify the startup code, interrupt vector table, timer registers, and port mapping.
Use the exact 44-pin mechanical drawing rather than selecting a footprint from the package family name alone. Confirm pad dimensions, lead pitch, exposed-pad requirements, pin numbering, and solder-mask clearance against the manufacturer drawing. Keep the oscillator and decoupling paths short, provide a clean reset network, and route programming or communication signals away from sensitive analog inputs. A PCB footprint review should occur before schematic release.
Validate the oscillator, reset, and I/O levels against the electrical characteristics before connecting external modules. Place the required supply and I/O-reference decoupling capacitors close to their associated pins, with a low-impedance ground path and no splits beneath the device. For externally connected ports, use suitable isolation, protection, and logic-level compatibility. The power architecture should also be checked for sequencing requirements if the board contains other programmable devices.
Preserve signal and return-path continuity around the MCU because the 40MHz clock requires predictable behavior at higher edge rates than legacy 8051 designs. Route oscillator traces away from switching nodes and communication lines, avoid long parallel runs over split planes, and provide nearby decoupling. Use the timer and I/O signals according to their multiplexing functions, and verify alternate-function routing in the pin table so a peripheral function is not inadvertently assigned to an adjacent network.
合規資訊
The component listing identifies RoHS compliance. No additional REACH, lead-free, halogen-free, conflict-minerals, or automotive qualification declarations are established.