WM8580GEFT/V - Multichannel Audio Codec | Cirrus Logic
MPN: WM8580GEFT/V ✓ 啟用中WM8580GEFT/V 概覽
An audio codec is a mixed-signal semiconductor that converts digital audio data into analog signals and converts analog audio into digital data. The WM8580 belongs to the broader hierarchy of audio codec, audio interface IC, interface IC, and integrated circuit. Its integrated S/PDIF transceiver adds digital-audio transmission capability, allowing the codec to support digital audio links alongside its analog audio conversion functions.
The WM8580GEFT/V combines a multichannel audio codec with S/PDIF transmit and receive capability in one package. Its analog and digital supply domains accept different voltage ranges, supporting integration with equipment that separates analog audio rails from low-voltage digital logic rails. The 48-TQFP surface-mount package provides 48 external connections for digital audio, analog audio, power, control, and supporting functions.
This component is intended for DVD, surround-sound processing, home-audio, automotive, and related audiovisual systems. The manufacturer datasheet describes the WM8580 family as a multichannel codec with S/PDIF transceiver and identifies applications including DVD and surround-sound processing equipment for home hi-fi, automotive, and other audiovisual products. Integrating the codec and digital interface can reduce the number of separate signal-chain devices required in an audio subsystem.
Typical deployments include multichannel home-theater receivers, DVD and surround-sound processors, automotive head units, digital-audio source equipment, and other consumer audiovisual products. The analog supply range reaches 5.5 V, while the digital supply range reaches 3.6 V, which permits use in both legacy and modern low-voltage digital audio architectures when the remaining interface requirements are satisfied.
PCB design should preserve clean analog and digital return paths, place decoupling capacitors close to their associated supply pins, and route S/PDIF signals away from noisy analog and switching-power sections. Before finalizing a layout, use the manufacturer pin-description table and typical application circuit in the WM8580 datasheet to assign every signal and define the power and ground connections correctly.
This page combines package, electrical, environmental, sourcing, and drop-in replacement information with practical design guidance. It also identifies the limits of the available cross-reference results so engineers can distinguish documented package compatibility from an unverified functional substitution before changing an existing PCB.
直接替換替代品,適用於 WM8580GEFT/V — 相同封裝,腳位對腳位相容。需重新設計 PCB 的不同封裝零件不列入。
此系列的變體
與下列產品可直接替換的同系列型號: WM8580GEFT/V (相同外形與佔位) — 差異在於 Digital Audio Interface, Operating Temperature Range.
WM8580GEFT/RV
✅ 直接替換聯絡詢價
查看資料表 →WM8580GEFT/V 最大額定值與電氣特性
| Product Type | Multichannel audio codec with S/PDIF transceiver |
| Manufacturer | Cirrus Logic |
| Analog Supply Voltage Range | 2.7 V to 5.5 V |
| Digital Supply Voltage Range | 2.7 V to 3.6 V |
| 工作溫度範圍 | -40 °C to +85 °C |
| Package Type | 48-TQFP |
| Package Dimensions | 7 mm x 7 mm |
| 腳位數 | 48 pins |
| 安裝類型 | Surface mount |
| Digital Audio Interface | S/PDIF |
| Audio Channel Configuration | Multichannel |
| S/PDIF Transceiver Direction | Transmit and receive |
WM8580GEFT/V 7 mm x 7 mm 腳位配置指南
WM8580GEFT/V(7 mm x 7 mm 封裝)的腳位配置。 此數位 IC 包含 GPIO、通訊介面(UART、SPI、I2C)與電源腳位。替代腳位功能與配置選項請參閱製造商資料表。對嵌入式系統設計與 PCB 佈局至關重要。
無詳細腳位定義資料: WM8580GEFT/V.
請參閱 資料表 以查看完整腳位配置。
典型應用
WM8580GEFT/V 適用於 6 應用s: Home-Theater Receiver, DVD and Surround-Sound Processor, Automotive Head Unit, Digital Audio Source Equipment, Surround-Sound Amplifier, Automotive and Home AV Processor.
Home-Theater Receiver
The WM8580GEFT/V fits a home-theater receiver because it combines a multichannel audio codec with an S/PDIF transceiver in one 48-TQFP device. Its 2.7 V to 5.5 V analog supply and 2.7 V to 3.6 V digital supply allow analog audio circuitry and low-voltage digital processing to operate from separate rails. The manufacturer identifies DVD and surround-sound processing as suitable applications. Place the codec close to the main audio signal routing, use the recommended decoupling arrangement, and keep the S/PDIF route away from switching-power and amplifier output stages to reduce coupling of digital activity into sensitive analog paths.
推薦
DVD and Surround-Sound Processor
The WM8580GEFT/V is specifically positioned for DVD and surround-sound processing equipment, where several audio channels and digital transmission may need to share a controlled conversion stage. Its integrated S/PDIF transceiver supports digital-audio connectivity, while the multichannel codec provides the core conversion function. The 48-TQFP surface-mount package supports compact board construction without introducing an additional large-footprint audio converter. Designers should follow the manufacturer application circuit, maintain separation between analog and digital return paths, and verify all channel-routing and format constraints against the complete datasheet before production routing.
推薦
Automotive Head Unit
The WM8580GEFT/V can be evaluated for automotive head units because its stated operating range of -40 °C to +85 °C covers common industrial-temperature requirements, and the manufacturer identifies automotive audiovisual equipment as an application. The integrated S/PDIF interface can support digital audio transport between the head-unit processor and amplifier subsystem. The 2.7 V to 5.5 V analog supply also accommodates legacy analog audio sections. Production adoption still requires confirmation of suffix-specific automotive qualification, EMC and ESD performance, audio-channel validation, and temperature-dependent testing rather than relying on the general application statement alone.
推薦
Digital Audio Source Equipment
The WM8580GEFT/V is appropriate for digital-audio source equipment that must exchange audio through S/PDIF while also supporting analog conversion paths. Integrating a multichannel codec and S/PDIF transceiver can consolidate several signal-chain functions within a 48-TQFP, 7 x 7 mm package. The digital supply accepts 2.7 V to 3.6 V, which is compatible with low-voltage logic, while the analog supply accepts 2.7 V to 5.5 V. The layout should provide short digital routes, controlled return-current paths, and local bypass capacitance, with the S/PDIF output characteristics checked against the downstream receiver.
推薦
Surround-Sound Amplifier
A surround-sound amplifier can use the WM8580GEFT/V where the design requires multichannel audio conversion together with a digital-audio link. The integrated S/PDIF transceiver allows digital audio to move between processing and amplification stages, while the codec provides the interface to analog audio circuitry. Its separate 2.7 V to 5.5 V analog and 2.7 V to 3.6 V digital supply ranges support partitioned power architecture. Care is required around high-current amplifier outputs: maintain clean analog grounding, keep the S/PDIF route isolated from switching and output stages, and populate decoupling close to the appropriate supply pins.
推薦
Automotive and Home AV Processor
The WM8580GEFT/V supports combined automotive and home audiovisual processors that need more than a simple stereo codec. Its multichannel architecture addresses multi-zone or surround-audio signal paths, while the S/PDIF transceiver provides a digital transport function between subsystems. The 48-TQFP package keeps the mixed-signal converter compact, and the -40 °C to +85 °C operating range suits industrial-temperature equipment. System integrators should treat the general automotive application statement separately from qualification: review the exact suffix, test channel mapping and digital timing, and complete environmental and EMC validation before releasing a production design.
推薦
推薦產品摘要
工程參考資料,適用於 WM8580GEFT/V — 比較、設計指引及合規資訊。
選型指南
與替代品比較
| 參數 | 本產品 | WM8580GEFT/RV |
|---|---|---|
| Package | 48-TQFP (7 x 7 mm) | 48-TQFP (7 x 7 mm) |
| Brand | Cirrus Logic | Cirrus Logic |
| Product Type | Multichannel audio codec with S/PDIF transceiver | Multichannel audio codec with S/PDIF transceiver |
| Mounting Type | Surface mount | Surface mount |
主要差異化特點
- Combines multichannel audio conversion with S/PDIF functionality (對比WM8580GEFT/RV)
- Supports separate analog and digital supply domains (對比WM8580GEFT/RV)
- Specified for a -40 °C to +85 °C operating range (對比WM8580GEFT/RV)
- Provides a 48-TQFP 7 x 7 mm mixed-signal package (對比WM8580GEFT/RV)
設計說明
Use the manufacturer land pattern and pin-description table to assign all 48 connections before PCB routing. Place the required input, output, and bypass capacitors adjacent to their associated supply pins rather than concentrating them at the power-entry point. Separate analog and digital return-current paths and use the shortest practical route for the S/PDIF connection, especially when the codec is located near a switching regulator or amplifier output stage.
The WM8580GEFT/V uses separate analog and digital supply domains: 2.7 V to 5.5 V for analog circuitry and 2.7 V to 3.6 V for digital circuitry. Confirm sequencing, voltage ramps, ground references, and power-source impedance against the manufacturer application circuit. If analog and digital supplies can start independently, verify that every operating combination remains within the device's stated electrical limits.
Treat S/PDIF as a routed digital-audio signal rather than a generic low-speed control line. Use the manufacturer-recommended termination and connection details, keep the trace away from switching nodes and noisy power inductors, and preserve a continuous reference plane. When several audio domains coexist, control ground and return currents so digital activity does not become common-impedance noise in the analog output path.
Do not substitute WM8580GEFT/RV solely because both parts use a 48-TQFP package. Confirm the suffix-specific temperature grade, reel code, lifecycle status, exposed-pad requirements, and complete pin assignments before approving the change. Likewise, do not infer the complete pinout from the 7 x 7 mm package dimensions; use the manufacturer pin table for every analog, digital, power, ground, and no-connect connection.
合規資訊
The manufacturer identifies automotive audiovisual equipment as an application, but the general application statement does not establish AEC-Q100 qualification. RoHS, REACH, lead-free, halogen-free, and conflict-minerals status require confirmation from current manufacturer documentation.