XC4VFX60-10FF672C - 56,880-Cell Virtex-4 FX FPGA | AMD
MPN: XC4VFX60-10FF672C ✗ 停產XC4VFX60-10FF672C 概覽
An FPGA is a semiconductor whose digital circuit is configured after manufacture through a programmable bitstream. Within the product hierarchy, the XC4VFX60 belongs to the Virtex-4 FX FPGA family, which combines general-purpose programmable logic with parallel processing, block memory, DSP48 arithmetic resources, and dedicated I/O. Compared with a fixed-function ASIC, an FPGA permits logic, interfaces, and signal-processing behavior to be revised through configuration rather than a redesigned silicon mask.
Key characteristics include 56,880 logic cells, 25,280 adaptive logic modules, and 6,320 configurable logic blocks. The -10 designation identifies the device speed grade, while the 672-ball FCBGA package supports dense connection to surrounding PCB layers. Its 1.2 V core voltage supports the performance and power characteristics associated with the Virtex-4 generation, while programmable I/O and dedicated high-speed interfaces allow system-specific communication paths to be implemented in the device.
The architecture is intended for designs requiring substantial parallel throughput rather than sequential instruction throughput. Configurable logic blocks and adaptive logic modules can implement datapaths, protocol engines, state machines, and control logic concurrently. Block RAM supports on-chip buffering and storage, while DSP48 resources accelerate arithmetic operations such as filtering, transforms, and fixed-point signal processing. Dedicated I/O and serial resources can reduce the external component count when the required interfaces are supported by the selected device configuration.
Typical uses include telecommunications line-card control, industrial automation, high-speed instrumentation, network packet processing, defense and aerospace control systems, and embedded signal-processing platforms. A Virtex-4 FX implementation can consolidate parallel logic and DSP functions into one programmable device while preserving the ability to update the bitstream during product development. Exact I/O standards, transceiver features, clocking requirements, and board-level power sequencing should be confirmed against the Virtex-4 family documentation before schematic capture.
The principal design consideration is the BGA implementation. A 672-ball FCBGA requires a dense multilayer PCB, exact ball assignments, controlled escape routing, and careful power and ground distribution. The device also requires multiple supply rails, decoupling, clocking, configuration memory, and a valid startup sequence. Thermal performance depends on the FPGA utilization, switching activity, supply voltage, board construction, airflow, and the thermal design of the assembled system rather than on the package name alone.
This product record combines device identity, package information, programmable-logic capacity, replacement options, comparison parameters, and practical PCB guidance. It is intended to accelerate sourcing and engineering decisions while keeping mechanical, thermal, configuration, and power-supply checks tied to the original manufacturer documentation.
直接替換替代品,適用於 XC4VFX60-10FF672C — 相同封裝,腳位對腳位相容。需重新設計 PCB 的不同封裝零件不列入。
此系列的變體
與下列產品可直接替換的同系列型號: XC4VFX60-10FF672C (相同外形與佔位) — 差異在於 Device Type, Logic Cells, Speed Grade, Configurable Logic Blocks, Core Supply Voltage.
XC4VFX60-10FFG672C
✅ 直接替換📋 參考替代品(不在目錄中)
XC4VFX60-10FF672I
✅ 直接替換聯絡詢價
查看資料表 →XC4VFX60-10FFG672I
✅ 直接替換📋 參考替代品(不在目錄中)
XC4VFX60-11FF672C
✅ 直接替換聯絡詢價
查看資料表 →XC4VFX60-11FF672I
✅ 直接替換聯絡詢價
查看資料表 →XC4VFX60-11FFG672C
✅ 直接替換📋 參考替代品(不在目錄中)
XC4VFX60-10FF672C 最大額定值與電氣特性
| Device Type | Virtex-4 FX Field Programmable Gate Array |
| Logic Cells | 56,880 cells |
| Adaptive Logic Modules | 25,280 ALMs |
| Configurable Logic Blocks | 6,320 CLBs |
| Speed Grade | -10 |
| 最大時脈頻率 | 1,028 MHz |
| Core Supply Voltage | 1.2 V |
| Process Technology | 90 nm CMOS |
| 封裝 | 672-pin FCBGA |
| Ball Count | 672 balls |
| 安裝類型 | Surface Mount |
| RoHS 狀態 | unknown |
| REACH Status | unknown |
| AEC-Q100 Qualification | unknown |
XC4VFX60-10FF672C 672-pin fcbga 腳位配置指南
XC4VFX60-10FF672C(672-pin fcbga 封裝)的腳位配置。 此數位 IC 包含 GPIO、通訊介面(UART、SPI、I2C)與電源腳位。替代腳位功能與配置選項請參閱製造商資料表。對嵌入式系統設計與 PCB 佈局至關重要。
無詳細腳位定義資料: XC4VFX60-10FF672C.
請參閱 資料表 以查看完整腳位配置。
典型應用
XC4VFX60-10FF672C 適用於 6 應用s: Telecommunications Line-Card Control, Industrial Automation and Control, Network Packet Processing, Digital Signal Processing, High-Speed Instrumentation, Embedded Image Processing.
Telecommunications Line-Card Control
The XC4VFX60-10FF672C fits telecommunications line-card control because its 56,880 logic cells and 25,280 adaptive logic modules can implement protocol engines, channel controllers, and administrative logic concurrently. The -10 speed grade supports timing design in established Virtex-4 FX systems, while the 672-pin FCBGA exposes the required user I/O and dedicated connectivity on a multilayer PCB. Designers can combine packet control, buffering, and arithmetic functions in one programmable device instead of using multiple fixed-function components. The principal engineering trade-off is the density of a 672-ball package, which requires accurate ball assignments, controlled escape routing, and careful power, ground, and thermal implementation.
推薦
Industrial Automation and Control
The XC4VFX60-10FF672C is suitable for industrial automation controllers requiring parallel logic, memory-intensive buffering, and programmable communication interfaces. Its 6,320 configurable logic blocks and 56,880 logic cells provide substantial capacity for motion sequencing, machine control, data acquisition, and safety-adjacent monitoring logic implemented in a single FPGA. The -10 grade supports an established timing baseline, and programmable I/O allows field-specific interfaces to be consolidated. For factory equipment, engineers should still verify environmental requirements, isolated I/O implementation, thermal performance under sustained switching activity, and the operating-temperature designation of the selected ordering code before release.
推薦
Network Packet Processing
The XC4VFX60-10FF672C can serve as a parallel network packet-processing engine because programmable logic, block memory, and DSP resources allow classification, filtering, header manipulation, and buffering to operate concurrently. Its 56,880-cell architecture is substantially larger than a small microcontroller or compact CPLD, making it appropriate for multiple simultaneous data paths. The device also supports board-level integration of high-speed serial connectivity and dedicated I/O. A practical design must establish clock domains carefully, constrain every interface, and account for routing congestion in a large 672-ball BGA implementation. Power estimation should reflect switching activity because dynamic consumption can vary substantially with logic utilization and activity factor.
推薦
Digital Signal Processing
The XC4VFX60-10FF672C fits parallel digital signal-processing systems that require configurable arithmetic alongside general control logic. The Virtex-4 FX architecture includes DSP48 resources for filtering, transforms, and multiply-accumulate workflows, while the 56,880-cell fabric handles buffering, control, and interface logic. This combination allows a designer to implement a complete datapath rather than splitting arithmetic and control across separate devices. Clocking discipline, DSP pipeline depth, block-memory bandwidth, and output timing must be evaluated during implementation. Because the exact embedded-memory and DSP-resource quantities are suffix-independent family characteristics, they should be confirmed in the final selection table before architectural capacity is committed.
推薦
High-Speed Instrumentation
The XC4VFX60-10FF672C is appropriate for high-speed instrumentation that must acquire, transform, and route multiple data streams in parallel. Its 25,280 adaptive logic modules can support acquisition control, trigger logic, data formatting, and memory management, while DSP48 resources can accelerate numeric operations. The 672-ball package provides a high connection count for complex board-level routing, but it also makes escape routing and multilayer impedance control central to PCB design. Timing closure should use the -10 speed constraints, and clock jitter, external memory timing, and I/O standards should be reviewed before schematic sign-off. The -11 family alternative may be considered when a different performance or power profile is required.
推薦
Embedded Image Processing
The XC4VFX60-10FF672C supports embedded image-processing designs that benefit from parallel pipelines and programmable logic architecture. Multiple pixel rows can be processed concurrently using configurable logic, block memory, and DSP48 arithmetic, while control logic handles acquisition sequencing, thresholding, color conversion, and data movement. The 56,880-cell device offers more implementation freedom than a fixed image processor and permits algorithm updates through bitstream configuration. Design teams should evaluate memory bandwidth, pixel-clock timing, resource sharing, and output latency against the target frame rate. The large FCBGA also demands assembly inspection, via-in-pad or microvia planning where appropriate, and adequate copper for power delivery and thermal spreading.
推薦
推薦產品摘要
工程參考資料,適用於 XC4VFX60-10FF672C — 比較、設計指引及合規資訊。
選型指南
與替代品比較
| 參數 | 本產品 | XC4VFX60-10FFG672C | XC4VFX60-10FF672I | XC4VFX60-11FF672C |
|---|---|---|---|---|
| Brand | AMD | AMD | AMD | AMD |
| Package | 672-pin FCBGA | 672-pin FCBGA | 672-pin FCBGA | 672-pin FCBGA |
| Device Family | Virtex-4 FX | Virtex-4 FX | Virtex-4 FX | Virtex-4 FX |
| Logic Cells | 56,880 cells | 56,880 cells | 56,880 cells | 56,880 cells |
| Adaptive Logic Modules | 25,280 ALMs | 25,280 ALMs | 25,280 ALMs | 25,280 ALMs |
| Speed Grade | -10 | -10 | -10 | -11 |
| Core Supply Voltage | 1.2 V | 1.2 V | 1.2 V | 1.2 V |
| Process Technology | 90 nm CMOS | 90 nm CMOS | 90 nm CMOS | 90 nm CMOS |
| Configurable Logic Blocks | 6,320 CLBs | 6,320 CLBs | 6,320 CLBs | 6,320 CLBs |
主要差異化特點
- Exact -10 speed-grade configuration (對比XC4VFX60-11FF672C)
- Direct match to the original approved suffix (對比XC4VFX60-10FFG672C)
- Industrial-grade ordering option (對比XC4VFX60-10FF672C)
設計說明
Treat the 672-ball FCBGA as a high-density, multilayer-routing problem. Assign all power and ground balls directly according to the manufacturer package data, use short reference-plane connections for supply distribution, and keep high-speed clock and serial routes over continuous planes. Escape-routing density and simultaneous switching noise should be checked before the first PCB release because these constraints can drive layer count, via strategy, and component placement.
Create separate power-distribution branches for the 1.2 V core and other device rails, then place high-frequency decoupling close to the corresponding package balls. Validate the regulator loop stability, startup sequence, voltage tolerances, and worst-case transient response against the official electrical tables. Estimated core dissipation must be based on actual voltage, current, utilization, and switching activity because logic utilization alone does not establish thermal performance.
Model thermal performance with the final PCB stackup, copper area, vias, component placement, enclosure, and airflow. The 672-ball package can distribute heat across many solder joints, but routing congestion may reduce the useful copper available for spreading it. Compare estimated junction temperature and margin against the operating-temperature requirements of the selected suffix, and avoid relying on the package drawing as a substitute for an assembled-board thermal calculation.
Separate configuration, clock, high-speed interface, and ordinary user-I/O routing into disciplined placement regions. Place configuration memory and associated signal-conditioning components near the relevant FPGA balls, keep clock routing short and symmetric, and avoid routing sensitive interfaces through areas with heavy switching activity. After implementation, inspect timing, congestion, and power distribution rather than assuming that a pin-compatible substitution is automatically timing- and signal-integrity-compatible.
合規資訊
Compliance status was not identified in the manufacturer overview or product-search records. Confirm current declarations and assembly requirements with AMD or the authorized supply channel.