XC5VLX30T-2FFG665C - 30720-Cell Virtex-5 LXT FPGA | Xilinx
MPN: XC5VLX30T-2FFG665C ✓ 啟用中XC5VLX30T-2FFG665C 概覽
A field-programmable gate array is a semiconductor whose digital logic, interconnect, and I/O can be configured after manufacture. An FPGA belongs to the programmable-logic hierarchy, combining lookup tables, flip-flops, block RAM, dedicated multipliers, dedicated I/O, and programmable clocking into one device. Virtex-5 LXT devices extend that general FPGA architecture with hardware resources intended for high-speed serial connectivity, networking, signal processing, and embedded system integration.
Key attributes include 30,720 logic cells organized into 2,400 configurable logic blocks, 360 user I/O, a 65 nm CMOS process, and a 665-terminal FCBGA package with a 1.00 mm ball pitch. The -2 identifier denotes the selected performance grade within the XC5VLX30T device family, allowing a common board design to be evaluated against other speed, temperature, and packaging options from the same Virtex-5 family.
The device combines programmable logic with dedicated block RAM, DSP-oriented arithmetic resources, SelectIO capability, and integrated clock-management features. These blocks allow designers to implement parallel data paths, high-throughput packet processing, embedded control, and external memory interfaces without relying on a separate processor for many system functions. Exact resource counts for block RAM, DSP slices, transceivers, and dedicated I/O are recorded in the manufacturer device overview and should be checked against the final design before resource allocation.
Typical applications include industrial networking equipment, telecommunications backplanes, radar and signal-processing front ends, high-speed data acquisition, storage systems, and communications infrastructure. The 360 available I/O and 1098 MHz internal performance make the device suitable for designs combining wide parallel interfaces with high-speed programmable logic. Industrial temperature operation also supports factory automation, transportation, and network-infrastructure environments.
PCB design requires careful attention to the 665-ball package, 1.00 mm pitch, power-plane distribution, decoupling, and high-speed routing. Use the AMD package pinout files and the manufacturer design guidance when assigning balls, planning the power grid, and checking differential-pair and clock constraints. A conservative approach is to begin with the published reference design, preserve the recommended layer stack, and reproduce the clock and power topologies before adding logic.
This page combines device specifications, package details, practical application guidance, drop-in alternatives, and design notes for engineers evaluating the XC5VLX30T-2FFG665C in Virtex-5 LXT designs.
直接替換替代品,適用於 XC5VLX30T-2FFG665C — 相同封裝,腳位對腳位相容。需重新設計 PCB 的不同封裝零件不列入。
此系列的變體
與下列產品可直接替換的同系列型號: XC5VLX30T-2FFG665C (相同外形與佔位) — 差異在於 Process Technology, Core Supply Voltage, Device Type, Package Type, Package.
XC5VLX30T-1FFG665CES
✅ 直接替換聯絡詢價
查看資料表 →XC5VLX30T-2FF665C
✅ 直接替換📋 參考替代品(不在目錄中)
XC5VLX30T-2FFG665I
✅ 直接替換 ⚠️ 規格未經驗證聯絡詢價
查看資料表 →XC5VLX30T-1FFG665I
✅ 直接替換 ⚠️ 規格未經驗證聯絡詢價
查看資料表 →XC5VLX30T-3FFG665C
✅ 直接替換 ⚠️ 規格未經驗證聯絡詢價
查看資料表 →XC5VLX30T-2FFG665C 最大額定值與電氣特性
| Device Type | Virtex-5 LXT FPGA |
| Logic Cells | 30,720 cells |
| Configurable Logic Blocks | 2,400 CLBs |
| User I/O | 360 I/O |
| Maximum Internal Frequency | 1098 MHz |
| Process Technology | 65 nm CMOS |
| Core Supply Voltage | 1.05 V nominal |
| Package Type | 665-BBGA FCBGA |
| Package Pin Count | 665 terminals |
| Ball Pitch | 1.00 mm |
| 工作溫度 | 0 °C to +85 °C |
| 安裝類型 | Surface Mount |
| Device Architecture | Virtex-5 LXT programmable logic |
| Speed Grade | -2 |
| REACH Status | REACH Unaffected |
XC5VLX30T-2FFG665C 665 terminals 腳位配置指南
XC5VLX30T-2FFG665C(665 terminals 封裝)的腳位配置。 此數位 IC 包含 GPIO、通訊介面(UART、SPI、I2C)與電源腳位。替代腳位功能與配置選項請參閱製造商資料表。對嵌入式系統設計與 PCB 佈局至關重要。
無詳細腳位定義資料: XC5VLX30T-2FFG665C.
請參閱 資料表 以查看完整腳位配置。
典型應用
XC5VLX30T-2FFG665C 適用於 6 應用s: Industrial Network Packet Processing, Telecommunications Backplane Interface, High-Speed Data Acquisition, Radar and Digital Signal Processing, Video and Imaging Pipeline, Secure Data Storage and Control.
Industrial Network Packet Processing
The XC5VLX30T-2FFG665C fits industrial Ethernet and network-interface designs that combine protocol processing with parallel data movement. Its 30,720 logic cells, 2,400 configurable logic blocks, and 360 user I/O allow framing, filtering, queue management, and interface bridging to be consolidated into one FPGA. The 1098 MHz listed internal frequency supports timing closure for demanding control and datapath logic, while the 0 °C to +85 °C rating suits factory-floor equipment. Designers should partition the architecture into dedicated clock domains and reserve a portion of the I/O budget for status LEDs, management interfaces, and industrial expansion connectors.
推薦
Telecommunications Backplane Interface
The XC5VLX30T-2FFG665C is suitable for telecommunications backplane and line-card functions requiring extensive parallel I/O and programmable data paths. Its 360 user I/O support multiple low-speed interfaces, management channels, and parallel fabric connections, while the 30,720 logic cells can implement header parsing, switching control, and time-slot processing. The industrial temperature range supports equipment deployed in controlled network facilities. Board implementation requires careful partitioning between noisy external interfaces and timing-critical internal logic, along with a power grid designed for the 665-ball FCBGA package.
推薦
High-Speed Data Acquisition
The XC5VLX30T-2FFG665C can act as the central processing device in a parallel data-acquisition system, where 360 user I/O and high-density programmable logic simplify the connection between converters or sensors and downstream processing. The 30,720 logic cells can accommodate channel alignment, digital correction, packetization, and trigger control, while the listed 1098 MHz internal capability supports demanding pipeline logic. Keep analog and digital ground references controlled within the PCB stack, and place interface termination close to the FPGA. The 665-ball package also demands simulation-based signal-integrity work before high-speed edges are committed to production.
推薦
Radar and Digital Signal Processing
The XC5VLX30T-2FFG665C supports radar and industrial signal-processing subsystems that combine wide parallel interfaces with high-throughput programmable pipelines. Its 2,400 configurable logic blocks and 30,720 logic cells can implement filtering, correlation, spectral transformation, and control functions, while the -2 speed grade provides additional timing margin relative to a -1 device. The 360 I/O simplify simultaneous sensor, trigger, and data-bus connections. Designers should establish fixed-point architectures, avoid uncontrolled fanout, and use the manufacturer timing constraints so placement and routing deliver the intended clock performance.
推薦
Video and Imaging Pipeline
The XC5VLX30T-2FFG665C can implement multi-channel video timing, pixel transport, color processing, and test-pattern generation in industrial imaging systems. Thirty thousand logic cells provide enough parallel capacity for several pipeline stages, and 360 I/O simplify connection to parallel image sensors and downstream display or storage logic. The 1098 MHz listed internal frequency supports efficient pipelining, although sustainable video throughput also depends on valid I/O standards, external memory bandwidth, and implemented pipelining. A pipelined register at every high-speed interface boundary helps preserve timing margin on the dense board.
推薦
Secure Data Storage and Control
The XC5VLX30T-2FFG665C is appropriate for storage controllers, encryption engines, and secure data-transfer systems where programmable logic must combine command handling with parallel data movement. Its 30,720 logic cells and 360 I/O provide a single-device option for CRC processing, buffering, state machines, and external memory interfaces. The -2 performance grade can help close timing in pipelined datapaths, while the industrial temperature range supports embedded and industrial equipment. Because the device is a large legacy BGA, mechanical validation, power sequencing, and thermal testing should be included in the production-risk plan rather than deferred until board bring-up.
推薦
推薦產品摘要
工程參考資料,適用於 XC5VLX30T-2FFG665C — 比較、設計指引及合規資訊。
選型指南
與替代品比較
| 參數 | 本產品 | XC5VLX30T-1FFG665C | XC5VLX30T-2FF665C | XC5VLX30T-2FFG665I | XC5VLX30T-1FFG665I | XC5VLX30T-3FFG665C |
|---|---|---|---|---|---|---|
| Brand | Xilinx | Xilinx | Xilinx | Xilinx | Xilinx | Xilinx |
| Package | 665-BBGA FCBGA | 665-BBGA FCBGA | 665-terminal FCBGA | 665-BBGA FCBGA | 665-BBGA FCBGA | 665-BBGA FCBGA |
| Device Family | Virtex-5 LXT | Virtex-5 LXT | Virtex-5 LXT | Virtex-5 LXT | Virtex-5 LXT | Virtex-5 LXT |
| Logic Cells | 30,720 cells | 30,720 cells | 30,720 cells | 30,720 cells | 30,720 cells | 30,720 cells |
| Configurable Logic Blocks | 2,400 CLBs | 2,400 CLBs | 2,400 CLBs | 2,400 CLBs | 2,400 CLBs | 2,400 CLBs |
| User I/O | 360 I/O | 360 I/O | 360 I/O | 360 I/O | 360 I/O | 360 I/O |
| Speed Grade | -2 | -1 | -2 | -2 | -1 | -3 |
| Process Technology | 65 nm CMOS | 65 nm CMOS | 65 nm CMOS | 65 nm CMOS | 65 nm CMOS | 65 nm CMOS |
主要差異化特點
- -2 speed grade provides higher timing margin than the -1 alternative (對比XC5VLX30T-1FFG665C)
- Large logic and I/O capacity in one legacy FPGA package (對比XC7A100T-2FGG676C)
- Industrial operating-temperature ordering (對比XC5VLX30T-2FFG665C)
- Higher speed-grade option preserves the same device footprint (對比XC5VLX30T-2FFG665C)
設計說明
Implement the XC5VLX30T-2FFG665C on a multilayer PCB with a continuous power plane and a carefully filtered split-plane topology as recommended for the 665-ball FCBGA. Use the official AMD package drawing and ball files for the land pattern, and route sensitive clocks and high-speed interfaces away from power-plane transitions. The 1.00 mm ball pitch leaves limited escape-routing space, so fanout must be planned before placement of external memory, transceivers, and connectors.
Separate core and I/O supply distribution into their own planes or regulated rails, and follow the manufacturer guidance for voltage sequencing and decoupling. Place the smallest high-frequency bypass capacitors directly beside the relevant supply balls, with additional bulk capacitance placed near the device's power-entry region. Validate the complete power grid under maximum I/O activity because simultaneous switching across 360 user I/O can create more rail disturbance than logic-only activity.
Estimated thermal planning should begin with the device's actual power dissipation under the intended clocking and I/O workload, then include the package thermal data and the PCB's effective heat-spreading area. A 665-ball FCBGA can have limited top-side heat removal, so spreading heat through the inner layers and thermal vias is important. Run thermal simulation with the component placed in its final enclosure and operating orientation, not on the bare board.
Do not substitute an FCBGA land pattern from a similar 665-ball device without comparing every ball location, power-ball arrangement, and package mechanical drawing. Likewise, do not assume that changing the speed or temperature suffix has no design impact. Recreate the timing constraints, verify the selected device's operating limits, and confirm that the configuration bitstream and device identifier match the exact ordering code fitted to the board.
合規資訊
The REACH status is listed as REACH Unaffected. RoHS, lead-free, halogen-free, and conflict-minerals statuses are not stated in the available product information, so they are recorded as unknown.