Z86C9325ASC - 25MHz 8-Bit ROMless MCU | Zilog
MPN: Z86C9325ASC ✓ 啟用中Z86C9325ASC 概覽
A ROMless 8-bit microcontroller is an embedded processing IC designed around an 8-bit CPU architecture and external program memory. Unlike a ROM-equipped variant, it allows firmware to remain in external nonvolatile memory, giving designers flexibility to update application code, share memory across products, or support multiple firmware configurations without changing the controller.
The Z86C9325ASC operates at 25 MHz, enabling the processor to execute control loops, scan input devices, update displays, and manage communication peripherals efficiently. Its 3 V to 5.5 V operating range supports both 3.3 V and 5 V system architectures. Listings identify the device as ROMless and associate the Z8 family with multiply and divide capabilities, making it suitable for motor, display, appliance, and industrial-control functions that require more arithmetic performance than a basic 8-bit controller.
The 48-pin LQFP-48 (7x7 mm) package provides the external interface required for a ROMless design. Because program storage is external, the complete PCB design must account for the associated address, data, and control paths. Component density is higher than that of smaller 8-bit packages, but the 7 mm by 7 mm footprint remains practical for industrial controllers, instrument panels, embedded control modules, and compact automation equipment.
Typical uses include keypad-driven control panels, stepper-motor indexers, timer and counter modules, sensor acquisition controllers, and communication front ends. At 25 MHz, the device can service time-sensitive input/output tasks while leaving computational headroom for protocol handling and application logic. External memory access timing and bus loading should be evaluated against the required clock and program size.
PCB planning should preserve the LQFP-48 footprint, provide a stable 3 V to 5.5 V supply, decouple the power rails close to the device, and route external-memory signals according to the manufacturer pin description. Because this ROMless configuration depends on external program memory, budget its cost, interface complexity, and update requirements together with the MCU.
This product page combines the Z86C9325ASC package and operating specifications with sourcing guidance, family alternatives, comparison parameters, and practical design considerations. It provides engineering context beyond a basic distributor listing while keeping every unconfirmed electrical or pin-level value clearly identified for datasheet review.
直接替換替代品,適用於 Z86C9325ASC — 相同封裝,腳位對腳位相容。需重新設計 PCB 的不同封裝零件不列入。
此系列的變體
與下列產品可直接替換的同系列型號: Z86C9325ASC (相同外形與佔位) — 差異在於 Package, Program Memory, Divider, Multiplier, Package Body Size.
Z86C9325FSC
✅ 直接替換 ⚠️ 規格未經驗證聯絡詢價
查看資料表 →Z86C9325PSG
✅ 直接替換 ⚠️ 規格未經驗證聯絡詢價
查看資料表 →Z86C9325VSG
✅ 直接替換 ⚠️ 規格未經驗證聯絡詢價
查看資料表 →Z86C9325ASG
✅ 直接替換 ⚠️ 規格未經驗證聯絡詢價
查看資料表 →Z86C9320ASG
✅ 直接替換 ⚠️ 規格未經驗證聯絡詢價
查看資料表 →Z86C9325ASC 最大額定值與電氣特性
| Product Type | 8-bit ROMless microcontroller |
| Product Series | Z86C93 |
| Architecture | Z8 8-bit |
| 最大時脈頻率 | 25 MHz |
| 工作電源電壓 | 3 V to 5.5 V |
| Program Memory | External ROM required |
| Device Architecture | 8-bit |
| 封裝 | 48-pin LQFP |
| Package Body Size | 7 mm x 7 mm |
| 安裝類型 | Surface mount |
| Pins | 48 pins |
| Arithmetic Capability | Multiply and divide |
| Core Count | 1 core |
| RoHS 狀態 | RoHS |
Z86C9325ASC 7 mm x 7 mm 腳位配置指南
Z86C9325ASC(7 mm x 7 mm 封裝)的腳位配置。 此數位 IC 包含 GPIO、通訊介面(UART、SPI、I2C)與電源腳位。替代腳位功能與配置選項請參閱製造商資料表。對嵌入式系統設計與 PCB 佈局至關重要。
無詳細腳位定義資料: Z86C9325ASC.
請參閱 資料表 以查看完整腳位配置。
典型應用
Z86C9325ASC 適用於 6 應用s: Industrial Control Panels, Stepper-Motor Sequencers, Timer and Counter Modules, Sensor Acquisition Controllers, Communication Front-Ends, Appliance and Embedded Modules.
Industrial Control Panels
The Z86C9325ASC fits keypad-driven industrial control panels that scan user inputs, drive indicators, and execute a deterministic state machine. Its 25 MHz Z8 core provides enough execution headroom for debouncing, menu handling, and supervisory logic, while the 3 V to 5.5 V range supports both 3.3 V and 5 V panel electronics. The controller can also service external program memory because the ROMless architecture permits firmware revisions without changing the MCU. In a panel implementation, keep external-memory traces short, decouple the supply at the LQFP-48 pins, and route interrupt-capable control signals away from switching nodes.
推薦
Stepper-Motor Sequencers
The Z86C9325ASC is appropriate for stepper-motor indexers, position counters, and small motion-control sequencers where a dedicated motion controller is unnecessary. At 25 MHz, the MCU can calculate step sequences, update direction and enable outputs, and monitor limit switches in real time. Multiply and divide capability in the Z86C93 family can reduce the computational burden of position scaling and time-to-step calculations. The 3 V to 5.5 V operating range allows direct interface with common 5 V driver logic when signal levels are compatible. Use external memory only after checking bus timing and firmware size, and add appropriate isolation or protection where motor noise could disturb the controller.
推薦
Timer and Counter Modules
The Z86C9325ASC can serve as the central controller in timer, event-counter, and production-line counting modules. Its 25 MHz clock allows the firmware to combine input-edge measurement, elapsed-time calculation, filtering, and output updates without relying on a slower general-purpose processor. The Z86C93 family's multiply and divide capability is useful when converting measured intervals into engineering units or applying scaling factors. Operating from 3 V to 5.5 V makes the part adaptable to legacy 5 V control boards and newer 3.3 V systems. Firmware should include debounce and overrange handling, while the PCB should provide stable timing references and protect long sensor wires from electrical transients.
推薦
Sensor Acquisition Controllers
The Z86C9325ASC can supervise resistive, digital, and switching sensors in compact acquisition modules. The 25 MHz 8-bit processor is suitable for polling sensors, filtering readings, applying calibration, and forwarding results through a serial interface. The ROMless configuration permits shared external program memory or field-update flexibility, although the external bus adds layout and timing considerations. Its 3 V to 5.5 V range supports mixed-generation instrument boards, provided each connected sensor uses compatible logic levels. Keep analog and digital return paths separated, place input conditioning close to the connector, and validate external-memory access timing at the highest intended operating frequency.
推薦
Communication Front-Ends
The Z86C9325ASC can act as a communication front end for legacy Z8 systems, translating between a host interface and a local control subsystem. At 25 MHz, it has sufficient clock rate for protocol framing, checksums, timeout management, and command processing while external program memory holds the application firmware. The device's 3 V to 5.5 V operating range supports integration with established 5 V serial circuitry and lower-voltage designs. Because the MCU is not a dedicated protocol controller, designers should validate interrupt latency and bit-rate margins. Decouple the supply locally, provide a defined reset path, and keep noisy transceiver or relay traces away from external-memory signals.
推薦
Appliance and Embedded Modules
The Z86C9325ASC is useful in appliance controllers, instrument modules, and compact embedded products that retain a Z8 code base. A 25 MHz CPU can coordinate user interfaces, sensors, timers, and actuators, while the 3 V to 5.5 V range accommodates multiple board architectures. ROMless operation allows one controller platform to serve multiple product variants by changing external firmware or configuration memory. The 48-pin LQFP provides a defined set of external interfaces without requiring the smallest possible package. Design teams should verify available I/O, interrupt assignments, and memory timing in the datasheet, then implement brownout, reset, and power-sequence tests across the complete 3 V to 5.5 V supply range.
推薦
推薦產品摘要
工程參考資料,適用於 Z86C9325ASC — 比較、設計指引及合規資訊。
選型指南
與替代品比較
| 參數 | 本產品 | Z86C9325FSC | Z86C9325PSG | Z86C9325VSG | Z86C9325ASG | Z86C9320ASG |
|---|---|---|---|---|---|---|
| Brand | Zilog | Zilog | Zilog | Zilog | Zilog | Zilog |
| Package | LQFP-48 (7x7 mm) | LQFP-48 (7x7 mm) | LQFP-48 (7x7 mm) | LQFP-48 (7x7 mm) | LQFP-48 (7x7 mm) | LQFP-48 (7x7 mm) |
| Product Series | Z86C93 | Z86C93 | Z86C93 | Z86C93 | Z86C93 | Z86C93 |
| CPU Architecture | 8-bit Z8 | 8-bit Z8 | 8-bit Z8 | 8-bit Z8 | 8-bit Z8 | 8-bit Z8 |
| Operating Supply Voltage | 3 V to 5.5 V | 3 V to 5.5 V family class | 3 V to 5.5 V family class | 3 V to 5.5 V family class | 3 V to 5.5 V family class | 3 V to 5.5 V family class |
主要差異化特點
- ROMless Z8 architecture supports external firmware memory (對比Z86C9320ASG)
- 25 MHz operating point within the Z86C93 family (對比Z86C9325ASG)
- Documented 48-pin LQFP, 7 mm by 7 mm package (對比Z86C9325FSC)
- Z86C93 multiply and divide capability (對比Z86C9325PSG)
設計說明
Treat the external program-memory bus as a timing-critical subsystem. Place the MCU and external memory according to the manufacturer reference layout, keep address and data routes short, and avoid routing these signals through noisy switching nodes. Because the device is ROMless, the CPU can stall while accessing external memory; validate worst-case access time against the 25 MHz operating requirement and include suitable decoupling on both devices.
Design the supply for the complete 3 V to 5.5 V operating range, including voltage tolerance, startup ramp limits, and brownout behavior at 5 V. Place the required bypass capacitors close to the LQFP-48 power and ground pins with short return paths. Confirm absolute maximum and recommended operating conditions in the manufacturer datasheet before adding external circuitry or choosing a lower-voltage series regulator.
Preserve the 48-pin LQFP land pattern and follow the manufacturer package drawing for pad dimensions, solder-mask clearance, and exposed-pad treatment if applicable. Check pin numbering against the datasheet pin table rather than inferring it from the device name. Adequate copper and thermal vias help maintain reliable soldering on the 7 mm by 7 mm package, especially where repeated thermal cycling or rework is expected.
Do not treat all Z86C9325 suffix codes as automatically interchangeable. The package family, speed grade, temperature range, and qualification suffix can change procurement compatibility even when the base device name is the same. Before a substitution is released, compare the ordering table, complete pin descriptions, electrical limits, external-memory timing, and qualification requirements for Z86C9325ASC and the proposed part.
合規資訊
RoHS status is identified by the Z86C9325ASC product listings. Other compliance attributes are not established by the available product information.