ArduinoCore-Zephyr 1.0.0 brings VENTUNO Q support and Zephyr 4.4.1 baseline

Arduino ships ArduinoCore-Zephyr 1.0.0 with VENTUNO Q board support, Zephyr 4.4.1 base, and Nicla Vision camera hooks, expanding the supported hardware list for Zephyr-based designs.

已发布 已更新 4 分钟阅读 ✓ AI 就绪 分享

TL;DR——三句话

  • Arduino released ArduinoCore-Zephyr 1.0.0 on 2026-09-04 with VENTUNO Q, Nicla Vision camera, and Zephyr 4.4.1 base (S1).
  • Version 0.90.0 on July 29, 2026 was the first stable ArduinoCore-Zephyr release, so 1.0.0 is the second stable tag (S1).
  • The release lists 11 Arduino-supported boards from UNO Q through Nicla Vision (S1).

摘自 key_takeaways （真实字段，最多 3 条）。事实与分析分别标注。

ArduinoCore-Zephyr 1.0.0 brings VENTUNO Q support and Zephyr 4.4.1 baselineEditorial cover for a component sourcing brief. Chip motif; headline "ArduinoCore-Zephyr 1.0.0 brings VENTUNO Q support and Zephyr 4.4.1 baseline". Reported key numbers: 1.0.0; 4.4.1; 0.90.0. 1 cited source. A one-time entrance animation stops under reduced motion.ArduinoCore-Zephyr 1.0.0 brings VENTUNO Qsupport and Zephyr 4.4.1 baselineREPORTED KEY NUMBERS1.0.04.4.10.90.01 sourceXAIPART
Cover image generated from data already shown on this page: the category motif, the headline, and reported key numbers. No decorative illustration; no third-party image.

您从 AI 回答跳转而来——这是可验证的原文

AI 摘要可能遗漏了其结论的依据。原始预测、受影响料号及所有引用均在本页，均可追溯至来源。

XAIPART 预测

本篇简报包含可证伪的预测。

跳转至完整预测及其证伪规则 ›
受影响的料号

此报道在目录中无匹配——我们选择不显示，而不是推断匹配。

了解判定方式 ›
需要采购料号？发送请求 → 询价

Reported by CNX Software on 2026-09-04. Summarized and analyzed by XAIPART Editorial.

What happened

Arduino has released ArduinoCore-Zephyr version 1.0.0, adding new hardware support, an updated Zephyr real-time operating system base, and additional camera capability.S1 Release highlights include support for the Arduino VENTUNO Q single-board computer, specifically targeting its STM32H5F5 real-time microcontroller, an update to Zephyr 4.4.1 with upstream improvements, security fixes, and driver support, and added Nicla Vision camera support to capture and process image data through the Zephyr core.S1 The release also bundles bug fixes and continuous integration improvements.S1

ArduinoCore-Zephyr 1.0.0 is not the first stable build; the source notes that version 0.90.0, released on July 29, 2026, was the first stable release of the line.S1 The full change list is published on the project GitHub release page.S1

According to the source, the boards currently supported by Arduino for this core include UNO Q, VENTUNO Q, Portenta H7, Portenta C33, Opta microPLC, GIGA R1 WiFi, Nano Matter, Nano RP2040 Connect, Nano 33 BLE, Nicla Sense ME, and Nicla Vision.S1 Third-party targets reachable through the Arduino-maintained Zephyr Community Boards package include the Renesas EK-RA8D1, NXP FRDM-MCXN947, and NXP FRDM-RW612.S1 The source notes that the IDE usually installs the Zephyr loader on first upload but that a manual install appears mandatory for the Portenta C33.S1

Key numbers
MetricReported value
ArduinoCore-Zephyr version released1.0.0
Zephyr RTOS base version in 1.0.04.4.1
First stable ArduinoCore-Zephyr release0.90.0
First stable release dateJuly 29, 2026
Number of Arduino-supported boards in 1.0.0 list11
Number of third-party boards listed for Zephyr Community Boards testing3
Number of new boards added in 1.0.0 vs. first stableNot disclosed

Background timeline

  1. - Arduino first announced its plan to switch from Arm Mbed to the Zephyr RTOS.S1
  2. - Arduino released the first beta of Arduino Core for Zephyr.S1
  3. - Arduino released ArduinoCore-Zephyr 0.90.0, the first stable version of the line.S1
  4. - Arduino released ArduinoCore-Zephyr 1.0.0 with VENTUNO Q support, Nicla Vision camera support, and the Zephyr 4.4.1 base.S1

XAIPART take

Technical impact

Moving to a Zephyr 4.4.1 base gives design teams newer upstream driver coverage, security patches, and RTOS refinements compared with the 0.90.0 stack, which matters for products that need long-lived CVE backports.XAIPART analysis Native VENTUNO Q support exposes the STM32H5F5 real-time MCU directly to Arduino sketches, which simplifies prototyping on a Cortex-M33 class core that already targets industrial control workloads.XAIPART analysis Nicla Vision hooks inside the Zephyr core shorten the path from sensor frame to on-device inference, removing the need for an Mbed-specific camera abstraction layer.XAIPART analysis

Market impact

The 11-board support list, spanning UNO Q through Nicla modules, gives procurement a single Arduino-validated Zephyr toolchain for low-volume professional designs, which can reduce the time teams spend qualifying separate SDKs per part.XAIPART analysis Because Zephyr Community Boards also covers Renesas EK-RA8D1 and NXP FRDM-MCXN947 / FRDM-RW612, buyers sourcing RA8D1 or RW612 silicon can prototype on Arduino before moving to vendor-native Zephyr BSPs, smoothing second-source planning.XAIPART analysis The release does not affect part availability or distributor lead times on its own; the relevant risk is firmware supportability, not supply.XAIPART analysis

Action

Engineering teams already on ArduinoCore-Zephyr 0.90.0 should plan a validation pass on 1.0.0 to pick up the Zephyr 4.4.1 security baseline, especially for any Nicla Vision or VENTUNO Q design that was held back on the older core.XAIPART analysis Portenta C33 users should budget time for a manual Zephyr loader install, since the IDE flow does not automate it on that board.XAIPART analysis For new designs, request the Arduino Zephyr Boards 1.0.0 package from the board manager and confirm the board file update prompt before locking the toolchain version in a CI pipeline.XAIPART analysis

XAIPART Forecast

XAIPART expects that, within 9 months of the 2026-09-04 release (i.e., by 2027-06-04), at least one of the boards listed in the current ArduinoCore-Zephyr 1.0.0 support matrix (for example, UNO Q or Portenta H7) will appear in an Arduino-maintained example that exercises Zephyr 4.4.1 west workspace flow with a documented security CVE backport reference; if no such example references Zephyr 4.4.1 by that date, this forecast is wrong.XAIPART analysis

Facts are as reported by the cited source. The design-in, sourcing and forward-looking statements above are XAIPART's analysis, not the source's claims. Uncertain: the exact list of CVEs or security fixes in Zephyr 4.4.1 is not detailed in the source; whether the 1.0.0 release introduces any API-breaking changes versus 0.90.0 is not disclosed.

Corrections: none at publication. This brief will be updated with a timestamp if the source corrects its report.

Dated developments, extracted from this page's timeline (curated milestones = hollow markers).
Timeline of dated developmentsDated entries: 2024-07-01 2024 - Arduino first announced its…; 2024-12-01 2024 - Arduino released the first …; 2026-07-29 29, 2026 - Arduino released Arduin…; 2026-09-04 - Arduino released ArduinoCore-Zep….2024-07-012024 - Arduino first announced its…2024-12-012024 - Arduino released the first …2026-07-2929, 2026 - Arduino released Arduin…2026-09-04- Arduino released ArduinoCore-Zep…

替代料与生命周期

已收录的替代料——仅为目录范围，不代表市场排名
料号关系生命周期依据
— 暂无收录替代料 待补充数据 — 需 match_type 后才可显示任何前代标签

“前代”和“替代”标签仅来自已记录的匹配类型、生命周期状态或来源文本。没有记录匹配时，不显示任何标签。我们自己的商品列表不构成市场参考。

关注要点

可证伪预测——阈值、时间窗口和当前状态。被推翻的预测仍保留可见。
论断阈值发布方状态
XAIPART expects that, within 9 months of the 2026-09-04 release (i.e., by 2027-06-04), at least one of the boards listed in the current ArduinoCore-Zephyr 1.0.0 support matrix (for example, UNO Q or Portenta H7) will ... no such example references Zephyr 4.4.1 by that date Pending

被证明错误的预测仍保留可见并加以标注。我们不会删除它们。

受影响的料号

目录中无匹配。 此事件未映射到 XAIPART 当前上架的任何料号。我们不推断匹配，也不显示占位列表。

各维度成本压力

Source: FRED · Generated · reference output z and composite are algorithm outputs, not a fetch snapshot

Cost pressure by dimension — composite stateDiverging bars for three dimensions around a zero midpoint. Input Cost has no reading; Supply Demand z -1.4711, notable; Fx Energy z 0.2546, neutral. Composite index -9.1, band neutral.0投入成本no reading供需z −1.4711 · notable46 d汇率与能源z +0.2546 · neutral5 dcomposite −9.1 · neutral−100 · −40 · −15 · 0 · +15 · +40 · +100
Underlying values — copyable for verification.
DimensionFRED series IDUnitLagAs of
投入成本PCOPPUSDM, PALUMUSDM, PNICKUSDMUSD/mt52 d
供需PCU334413334413, IPG3344Sindex(1982=100) / index(2017=100)46 d
汇率与能源DEXCHUS, DCOILBRENTEU, DHHNGSPrate / USD/bbl / USD/MMBtu5 d

No free authoritative interface for: gold · silver · rare earth · polysilicon · lithium carbonate · market share — listed rather than approximated.

本文如何生成

过程证据——抓取、来源可靠性检查、模型与校验
本简报的审计记录
Source fetched CNX Software · www.cnx-software.com · 2,404 chars
Source sanity (S1) ok — passed before any model call (no s1_ block recorded)
Model / prompt MiniMax-M3 · prompt Blog Agent - News Summary (v2.8-final) · 7,153 tokens · 29.7s · run completed
Gate verdict hold · 6/6 applicable checks passed · spec v2.9 · C10 ratio 0.032319 · C10 rounds 0
Time contract 4 <time datetime> values in this brief — 0 violations (+08:00 or date-only)

上述每一行均由流水线生成，而非人工撰写。

编辑评分

确定性校验结果——纯 PHP 实现，判定过程不涉及模型
校验评分明细 6 项适用检查， 6项通过： 100 %. Hold items: C13 (falsifiable forecast) — sent to human review. Gate spec: v2.9 (S0 + S1 + C1–C20) · Source affinity (C20): 0.6735. 适用检查已通过 6 / 6 = 100% · 判定： hold Hold items: C13 (falsifiable forecast) — sent to human review Gate spec: v2.9 (S0 + S1 + C1–C20) · Source affinity (C20): 0.6735 是否发布由校验决定。独立审计评分仅供参考。

相关报道

发现错误？ 告诉我们哪里有问题 ——更正内容会与原文一同发布并记录在案。我们不会悄悄修改文章。

评论

成为第一个评论的人。

来源

  1. ArduinoCore-Zephyr 1.0.0 adds support for Arduino VENTUNO Q, updates to Zephyr 4.4.1, and more — https://www.cnx-software.com/2026/09/04/arduinocore-zephyr-1-0-0-adds-support-for-arduino-ventuno-q-updates-to-zephyr-4-4-1-and-more/ · rss · 访问于

事实标注为 S1/S2，并可追溯至所链接的来源。标注为 分析 的内容是 XAIPART 自身的推理，与报道的事实分开呈现。来源链接会被访问核实，而非 nofollow ——署名是有意为之。