集成电路

子分类

📁 ADC/DAC 2519 产品 📁 放大器IC 797 产品 📁 音频编解码器 16 产品 📁 音频IC 2 产品 📁 时钟与计时 304 产品 📁 DSP 963 产品 📁 数据采集IC 2 产品 📁 数字电位器 4 产品 📁 显示驱动与控制器 1 产品 📁 FPGA与CPLD 6666 产品 📁 接口IC 1586 产品 📁 LED驱动器 1 产品 📁 逻辑IC 305 产品 📁 存储IC 875 产品 📁 微控制器 18734 产品 📁 微处理器 4 产品 📁 电机驱动器 1 产品 📁 其他 1 产品 📁 Sensor and Detector Interfaces 1 产品 📁 专用IC 15 产品 📁 视频IC 13 产品

产品（32812)

PIC32CM1216MC00032-I/RTB - 48MHz Cortex-M0+ 128KB MCU | Microchip
PIC32CM1216MC00032-I/RTB

PIC32CM1216MC00032-I/RTB - 48MHz Cortex-M0+ 128KB MCU | Microchip

The Microchip Technology PIC32CM1216MC00032-I/RTB is a 32-bit ARM Cortex-M0+ microcontroller from the PIC32CM MC00 family, delivering 48 MHz CPU performance with 128 KB of Flash and 16 KB of SRAM in a 32-pin VQFN (5x5 mm) package. It is engineered for 5 V operation in noisy consumer, commercial, industrial, and automotive environments, integrating motor-control peripherals alongside robust serial communication. What is a 32-bit microcontroller? A microcontroller (MCU) is a single-chip computer that integrates a CPU core, program memory (Flash), volatile memory (SRAM), and peripheral interfaces. The PIC32CM MC00 family uses the ARM Cortex-M0+ core, the smallest and most energy-efficient 32-bit core in the ARM family, offering deterministic interrupt response and Thumb-2 instruction set efficiency. Within the broader taxonomy, this part is a Cortex-M0+ MCU -> ARM MCU -> 32-bit MCU -> microcontroller -> semiconductor. Key features include 128 KB Flash, 16 KB SRAM, 48 MHz core clock, integrated motor-control PWM, SERCOM (serial communication) peripherals with LIN support, and a wide operating voltage range suited for 5 V systems. The 32-VQFN (5x5) package exposes a generous set of I/O pins while keeping the PCB footprint under 25 mm², ideal for compact motor-control and industrial designs. Technically, the device is built on a low-power CMOS process and includes an on-chip debugger, multiple timers, ADC, and motor-control PWMs. Hardware-level features such as brown-out detect, watchdog timer, and clock failure detection improve reliability in electrically noisy motor-drive environments where stray inductance and back-EMF can corrupt logic signals. Typical applications include BLDC and PMSM motor control, HVAC fan/pump controllers, appliance control boards, small industrial drives, and LIN-attached body-control nodes. The combination of 5 V tolerance and integrated motor-control peripherals simplifies mixed-signal PCB design. When designing with this part, verify that your motor-control algorithm (FOC, trapezoidal, or sensorless) is supported by the available PWMs and ADCs. Decoupling, ground returns, and proper PCB layout for high-current switching traces are essential for EMC compliance.

询价 联系我们
PIC32CM1216MC00032T-E/PT - 48MHz Cortex-M0+ MCU 128KB Flash TQFP-32 | Microchip
PIC32CM1216MC00032T-E/PT

PIC32CM1216MC00032T-E/PT - 48MHz Cortex-M0+ MCU 128KB Flash TQFP-32 | Microchip

The Microchip Technology PIC32CM1216MC00032T-E/PT is an ARM Cortex-M0+ based 32-bit microcontroller in the PIC32CM MC family, integrating 128 KB of Flash and 16 KB of SRAM, and packaged in a 32-pin TQFP (7x7 mm) operating over a 2.7 V to 5.5 V supply range. The device runs at up to 48 MHz and targets consumer, commercial, industrial and automotive applications in electrically noisy environments, with motor-control features and LIN support integrated on-chip. This variant is the tape-and-reel ("T") shipping form, in the "E" extended temperature grade, suitable for production reel assembly. A 32-bit microcontroller (MCU) is a single-chip computer that integrates a CPU core, program memory (typically Flash), data memory (SRAM), and a rich set of peripherals (timers, communication controllers, ADC, GPIO) into one IC. The Cortex-M0+ is the smallest and most energy-efficient core in the ARM Cortex-M family, balancing deterministic real-time performance with low power and a tiny silicon footprint. Within Microchip's taxonomy, the PIC32CM MC line slots under PIC32-bit MCUs -> microcontrollers -> integrated circuits, and is specifically optimized for motor-control and LIN-connected nodes. Key differentiating specifications include 128 KB of Flash, 16 KB SRAM, 4 KB EEPROM emulation, 26 GPIO, an integrated Cortex-M0+ core at 48 MHz, and AEC-Q100 automotive qualification on certain ordering codes. The MC family adds motor-control PWM, a 12-bit ADC with hardware accumulation, and SERCOM-style configurable serial peripherals plus a LIN transceiver interface, enabling compact BLDC/PMSM drive and LIN slave designs without an external communication IC. Architecturally, the PIC32CM1216MC00032 uses a Harvard bus with single-cycle I/O access, an M0+ core with a single 32-bit multiplier, Nested Vectored Interrupt Controller (NVIC), and Microchip's Peripheral Touch Controller (PTC) and motor-control PWM (MCPWM) blocks. It supports up to 4 KB of independent EEPROM emulation in Flash and includes a 12-bit 1 Msps ADC. The E-grade version specifies -40C to +125C operation, matching the harsh-environment design intent called out in the family brief. Typical applications include BLDC and PMSM motor drives (small fans, appliance pumps, power tools), automotive LIN body and sensor nodes, industrial sensor signal conditioning with local control, and low-cost consumer appliances with capacitive touch user interfaces. The wide 2.7-5.5 V supply also permits direct 3.3 V or 5 V system designs without a second regulator. When designing with this part, reserve at minimum one UART for LIN, verify the MCPWM channel count matches your switch topology (3-phase vs 1-phase), and budget PCB area for the 32-pin TQFP's 0.8 mm pitch (hand-solderable but pitch-conscious). This page synthesizes distributor pricing, drop-in alternatives and practical design notes not all collected on the manufacturer product page.

询价 联系我们
PIC32CM1216MC00032T-E/RTB - 48MHz Cortex-M0+ MCU 128KB | Microchip
PIC32CM1216MC00032T-E/RTB

PIC32CM1216MC00032T-E/RTB - 48MHz Cortex-M0+ MCU 128KB | Microchip

The Microchip Technology PIC32CM1216MC00032T-E/RTB is a 32-bit ARM Cortex-M0+ microcontroller from the PIC32CM MC family, featuring 128KB of Flash program memory and 16KB of SRAM in a 32-pin VQFN (5x5 mm) package with motor-control peripherals. The device runs at a 48MHz CPU clock and operates from a wide 2.7V to 5.5V supply, which makes it directly compatible with 3.3V and 5V system rails commonly used in industrial and consumer designs. A microcontroller (MCU) is an integrated circuit that combines a CPU core, program memory (Flash), working memory (SRAM), and a rich set of programmable peripherals on a single silicon die. The PIC32CM MC family in particular is positioned by Microchip as a 5V-tolerant Cortex-M0+ family for noisy environments, sitting in the broader taxonomy: microcontroller -> embedded processor -> semiconductor. This hierarchy is important because MCUs are the smallest programmable building block above fixed-function logic and below application processors (MPUs). Key features include 128KB Flash organized as 128K x 8, 16KB SRAM, and motor-control peripherals (PWM, ADC, quadrature decoder) integrated on-chip. The Cortex-M0+ core implements the ARMv6-M architecture with single-cycle I/O access, hardware multiply, and the Serial Wire Debug (SWD) interface. Communications peripherals include SERCOM modules that can be configured as UART, SPI, or I2C, plus LIN support for automotive sub-bus networks. The device also supports up to 125 degrees C operating temperature in the 'E' temperature grade (extended). Typical applications include BLDC/PMSM motor control for small fans, pumps, and appliances, LIN-connected body electronics, industrial sensor nodes with UART/SPI peripherals, LED lighting controllers, and low-cost consumer devices that require 5V I/O tolerance. The combination of 5V I/O tolerance and motor-control timers reduces external level-shifters and gate-driver complexity. When designing with this device, ensure the SWD pins are accessible for in-circuit programming and that the motor-control timer outputs are routed to pins that support PWM. The internal 48MHz oscillator is factory-trimmed and is sufficient for many applications, but motor-control loops may benefit from a higher-accuracy external crystal.

询价 联系我们
PIC32CM1216MC00032T-I/PT - 48MHz Cortex-M0+ MCU, 128KB Flash, 32-TQFP | Microchip
PIC32CM1216MC00032T-I/PT

PIC32CM1216MC00032T-I/PT - 48MHz Cortex-M0+ MCU, 128KB Flash, 32-TQFP | Microchip

The Microchip Technology PIC32CM1216MC00032T-I/PT is a 32-bit ARM Cortex-M0+ microcontroller from the PIC32CM MC00 family, running at up to 48 MHz with 128 KB of Flash, 16 KB of SRAM, and 4 KB of EEPROM. It is housed in a 32-pin TQFP (7x7 mm) package and operates from 2.7V to 5.5V with 26 general-purpose I/O pins. The device is qualified for the -40C to +85C industrial temperature range and targets motor control and noisy-environment applications. A microcontroller (MCU) is a single-chip computer that integrates a CPU core, program memory (Flash), working memory (SRAM), non-volatile data storage (EEPROM), and a rich set of peripherals (timers, ADC, communication ports). MCUs sit at the heart of nearly every embedded system, from sensor nodes to appliance controllers. The Cortex-M0+ core (from the broader ARM Cortex-M family of 32-bit processor cores) provides a Thumb-2 instruction set and deterministic interrupt response while consuming very little active and sleep current. Key features of this part include a 48 MHz maximum CPU clock, a 12-bit ADC, multiple SERCOM (Serial Communication) interfaces that can be configured as UART, SPI, or I2C, an advanced motor-control PWM peripheral (PWM with 24-bit resolution and complementary outputs with dead-band insertion), LIN support, and configurable logic cells. The integrated Cortex-M0+ core also enables the use of the standard ARM ecosystem: CMSIS drivers, middleware, and tools, while Microchip provides MPLAB X IDE, MPLAB Harmony, and the MCC pin manager. From a technical perspective the PIC32CM MC00 family uses a single-cycle hardware multiplier, a Nested Vectored Interrupt Controller (NVIC), and the Microchip proprietary Peripheral Touch Controller (PTC) for capacitive sensing. The dual-bank Flash with live update support allows firmware upgrades without downtime, which is valuable in field-deployed industrial nodes. The 4 KB EEPROM emulated in Flash provides endurance and retention suitable for storing calibration, configuration, and runtime data. Typical applications include BLDC and brushed DC motor drives, consumer appliances, industrial control boards, HVAC fan control, automotive body and convenience ECUs (LIN slaves), capacitive-touch user interfaces, and 5V-tolerant sensor hubs. The 5V-tolerant I/O and 2.7V-5.5V supply range also suit legacy 5V industrial designs where 3.8V-only Cortex-M0+ parts cannot be used directly. When designing with this MCU, ensure the supply decoupling network includes at least one 100 nF ceramic capacitor per VDD pin placed as close to the IC as possible, plus a bulk 10 uF capacitor on the main rail. For motor-control layouts keep the PWM traces short, separate analog and power grounds, and place at least one local decoupling cap per MOSFET gate-driver supply pin. This page consolidates distributor pricing, verified drop-in alternatives, and engineering design notes that are not aggregated on the manufacturer datasheet alone, supporting faster sourcing and design decisions for engineers evaluating the PIC32CM1216MC00032T-I/PT.

询价 联系我们
PIC32CM1216MC00032T-I/RTB - 48MHz Cortex-M0+ MCU, 128KB Flash | Microchip
PIC32CM1216MC00032T-I/RTB

PIC32CM1216MC00032T-I/RTB - 48MHz Cortex-M0+ MCU, 128KB Flash | Microchip

The Microchip Technology PIC32CM1216MC00032T-I/RTB is a 32-bit ARM Cortex-M0+ microcontroller from the PIC32CM MC00 family, delivering 48 MHz CPU performance with 128 KB Flash and 16 KB SRAM in a 32-pin VQFN (5x5 mm) surface-mount package. The device is built for consumer, commercial, industrial and automotive applications operating in electrically noisy environments, and integrates motor-control peripherals alongside robust serial communications. What is a 32-bit Cortex-M0+ MCU? An ARM Cortex-M0+ microcontroller is the smallest and most energy-efficient member of the Cortex-M family, designed for deterministic real-time control in embedded systems. It occupies the position: MCU -> 32-bit microcontroller -> ARM Cortex-M -> embedded processor -> semiconductor. The Cortex-M0+ combines a 32-bit Thumb-2 instruction set with a tiny gate count, low active power, and a single-cycle I/O port, making it ideal for cost-sensitive control loops, sensor hubs, and motor control. Key features of the PIC32CM1216MC00032T-I/RTB include a 48 MHz core, 128 KB program Flash, 16 KB SRAM, a 2.7 V to 5.5 V wide operating supply range suitable for 5 V rails, integrated motor-control PWMs and analog comparators, and SERCOM-configurable serial interfaces plus LIN support. The PIC32CM MC00 family emphasizes robust communications peripherals designed for noisy environments. The 32-pin VQFN package (5x5 mm) provides a compact footprint with an exposed pad for thermal dissipation. Architecturally, the device uses a single-cycle I/O port, a Nested Vectored Interrupt Controller (NVIC), and configurable SERCOM modules that can be assigned as UART, SPI, or I2C, allowing flexible peripheral mapping. The motor-control timer and PWM subsystem support complementary outputs with dead-time insertion, while the ADC provides synchronized motor-control sampling. This combination allows the MCU to handle brushless DC (BLDC), permanent-magnet synchronous (PMSM), and stepper motor control loops directly. Typical applications include BLDC and PMSM motor control, 5 V industrial sensor hubs, appliance controllers, HVAC fan control, automotive body electronics with LIN bus, and consumer white goods. The 5 V tolerance and the LIN transceiver-compatible SERCOM make it well suited to automotive 12 V body-control networks. When designing with this device, observe the 2.7 V to 5.5 V supply window and use the exposed pad of the VQFN as the primary thermal dissipation path. For motor-control applications, follow Microchip application note AN2584 (motor-control tuning) and the PIC32CM MC00 family datasheet DS60001638B for peripheral configuration details. Decoupling requires a 100 nF X7R capacitor on each VDD pin plus a bulk 4.7 uF cap near the exposed pad. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet alone.

询价 联系我们
PIC32CM1216MC00048-E/U5B - 128KB Flash Cortex-M0+ MCU | Microchip
PIC32CM1216MC00048-E/U5B

PIC32CM1216MC00048-E/U5B - 128KB Flash Cortex-M0+ MCU | Microchip

The Microchip PIC32CM1216MC00048-E/U5B is a 32-bit ARM Cortex-M0+ microcontroller with 128 KB Flash, 16 KB SRAM, and dedicated motor-control peripherals, housed in a 48-pin VQFN (7x7 mm) package. Operating at up to 48 MHz, it is part of the PIC32CM MC family designed for 5V-tolerant consumer, commercial, industrial and automotive applications in electrically noisy environments. The part is the -E (extended) temperature grade rated to +125C and ships in U5B (48-pin VQFN) tape-and-reel packaging. A 32-bit microcontroller (MCU) is an integrated circuit containing a processor core, program and data memory, and programmable peripherals on a single silicon die. The Cortex-M0+ core from Arm is the smallest and most energy-efficient member of the Cortex-M family, designed for deterministic real-time control with a 2-stage pipeline, Thumb/Thumb-2 instruction support, and a single-cycle hardware multiply. The PIC32CM MC family further extends the architecture with motor-control oriented peripherals such as dedicated PWM timers, high-speed analog comparators, and op-amps suitable for FOC (field-oriented control) and trapezoidal commutation. The PIC32CM MC family sits within Microchip's PIC32M family and shares its 5V-tolerant I/O heritage with the dsPIC33/PIC24 architectures. Key features include 128 KB of Flash, 16 KB of SRAM, and a peripheral set including SERCOM-style serial interfaces, CAN-FD, LIN, and motor-control PWMs. The PIC32CM MC00 die is fabricated by UMC Fab 8N as an additional fabrication site per PCN documentation, and the device operates over a 2.7V to 5.5V supply. Communication peripherals typically include multiple SERCOM-style USART/SPI/I2C channels along with CAN-FD, and LIN hardware, plus a full-speed USB 2.0 device. From an architecture perspective, the PIC32CM MC00 integrates the Cortex-M0+ core with Microchip's motor-control analog front-end (PWM timers, comparators, op-amps), enabling single-chip FOC motor control for BLDC, PMSM, and stepper motors. The -E (extended) suffix indicates the -40C to +125C operating temperature range suitable for underhood automotive and industrial applications. Typical applications include BLDC/PMSM motor control in appliances and e-bikes, HVAC fan and pump control, automotive body and powertrain subsystems, industrial servo drives, and 5V industrial sensor hubs. The device's combination of 5V I/O tolerance and integrated analog simplifies the analog front-end design. When designing with this part, ensure adequate decoupling near each VDD pin and provide a low-impedance ground return. The integrated op-amps and comparators need careful PCB layout for noise immunity - keep analog traces short and use a separate analog ground island where possible. This page synthesizes distributor pricing, parametric comparison, and drop-in alternatives not found in the manufacturer datasheet alone.

询价 联系我们
PIC32CM1216MC00048-E/Y8X - 48MHz Cortex-M0+ MCU, 128KB Flash, 48-TQFP | Microchip
PIC32CM1216MC00048-E/Y8X

PIC32CM1216MC00048-E/Y8X - 48MHz Cortex-M0+ MCU, 128KB Flash, 48-TQFP | Microchip

The Microchip PIC32CM1216MC00048-E/Y8X is a 32-bit ARM Cortex-M0+ microcontroller in the PIC32CM MC family, featuring 128 KB of Flash, 16 KB of SRAM, and 48 MHz CPU clock in a 48-pin TQFP (7x7 mm) package. It is rated for the extended -40C to +125C temperature range and is qualified to AEC-Q100 for automotive use, making it suitable for harsh-environment motor-control and industrial designs. What is a PIC32CM MC microcontroller? The PIC32CM MC family combines an ARM Cortex-M0+ core with Microchip's peripheral set and 5V-tolerant I/O, targeting motor-control, LIN-connected, and consumer/industrial/automotive applications in noisy environments. Architecturally, it sits in the 32-bit MCU hierarchy as: PIC32CM MC -> Cortex-M0+ MCU -> ARM Cortex-M microcontroller -> 32-bit embedded MCU -> microcontroller -> embedded system. The Cortex-M0+ core delivers Thumb-2 instruction efficiency at low power, while Microchip's SERCOM, motor-control PWM (MCPWM), and analog peripherals provide the application-specific I/O for sensorless and sensored motor drives. Key features include 128 KB (128K x 8) Flash, 16 KB SRAM, 48 MHz maximum CPU speed, integrated motor-control peripherals, SERCOM configurable serial communication, LIN support, and AEC-Q100 qualification. The -E temperature grade extends operation to +125C, suitable for underhood automotive and industrial cabinets. The 48-TQFP (7x7) footprint offers an industry-standard surface-mount package compatible with hand-soldering and reflow profiles. Typical applications include BLDC/PMSM motor drives (low-voltage fans, pumps, appliances), automotive body and HVAC actuators with LIN connectivity, industrial sensor hubs with SERCOM peripherals, and consumer devices that require 5V tolerance on GPIO. The combination of 5V I/O and motor-control PWM makes it a strong fit for direct-driven low-voltage three-phase inverters when paired with an external gate driver. When designing with this MCU, allocate sufficient Flash for a motor-control state machine plus communication stacks (LIN/CAN). Verify the thermal envelope of the 48-TQFP at sustained 48 MHz operation in sealed enclosures. For development, the PIC32CM MC00 Curiosity Pro evaluation kit provides a pre-qualified hardware platform with the PIC32CM MC00 PIM for immediate prototyping. This page synthesizes distributor pricing, drop-in alternative MPNs, and practical design notes that go beyond the manufacturer datasheet.

询价 联系我们
PIC32CM1216MC00048T-E/U5B - 48MHz, 128KB Flash MCU | Microchip
PIC32CM1216MC00048T-E/U5B

PIC32CM1216MC00048T-E/U5B - 48MHz, 128KB Flash MCU | Microchip

The Microchip PIC32CM1216MC00048T-E/U5B is a 32-bit ARM Cortex-M0+ microcontroller from the PIC32CM MC family, operating at up to 48 MHz with 128 KB of Flash and 16 KB of SRAM, housed in a 48-pin VQFN (7x7 mm) package with motor-control and LIN-friendly peripherals. It is part of the PIC32CM MC00 series designed for consumer, commercial, industrial and automotive use in noisy EMC environments, featuring robust SERCOM-style serial communication, CAN, LIN, and PWM-rich timers aimed at field-oriented motor control. A microcontroller (MCU) is an integrated circuit that combines a CPU core, volatile and non-volatile memory, peripherals (timers, ADC, communication controllers) and interrupt logic into a single chip. The Cortex-M0+ is an ultra-low-power 32-bit ARM core optimized for deterministic embedded workloads. PIC32CM MC devices extend the SAM C-class lineage into Microchip's PIC portfolio, and the part fits into the broader taxonomy: MCU -> 32-bit MCU -> ARM Cortex-M0+ MCU -> motor-control MCU -> automotive-grade MCU -> semiconductor IC. Key features include a 48 MHz core, 128 KB Flash, 16 KB SRAM, an integrated Analog Comparator and 12-bit ADC, multiple SERCOM modules for I2C/SPI/UART, CAN and LIN controllers, motor-control PWMs, and AEC-Q100 automotive qualification per the Digi-Key listing. The 48-VQFN package provides an exposed thermal pad for efficient heat extraction at sustained industrial loads. The architecture relies on a single-core Cortex-M0+ with Microchip's MPLAB X / Harmony peripheral library support, enabling rapid firmware migration from SAM C20/C21 designs. The device operates across -40C to +125C (E temperature grade), suiting under-hood automotive and industrial enclosures. Typical applications include BLDC and PMSM motor drives (FOC), HVAC fan and pump controllers, automotive body and chassis ECUs, industrial sensor nodes, and consumer appliance control boards. The combination of LIN, CAN and motor-control PWM makes it especially attractive for cost-sensitive mechatronic modules. When designing with this part, verify that your firmware stack targets the PIC32CM MC00 (not legacy PIC24 or PIC32MX) toolchain and that the 48-pin VQFN land pattern is consistent with your PCB manufacturing capability. Mind the derating of ADC input impedance at high source impedance. This page synthesizes distributor pricing, verified parametric data, and drop-in alternative guidance beyond what the manufacturer datasheet alone supplies.

询价 联系我们
PIC32CM1216MC00048T-E/Y8X - 48MHz Cortex-M0+ MCU, 128KB Flash, 48-TQFP | Microchip
PIC32CM1216MC00048T-E/Y8X

PIC32CM1216MC00048T-E/Y8X - 48MHz Cortex-M0+ MCU, 128KB Flash, 48-TQFP | Microchip

The Microchip PIC32CM1216MC00048T-E/Y8X is a 5V-tolerant ARM Cortex-M0+ microcontroller with 128 KB Flash, 16 KB SRAM, integrated motor-control peripherals, and an extended -40C to +125C operating range, housed in a 48-pin TQFP (Y8X) package supplied on tape-and-reel. It belongs to the PIC32CM MC family of 32-bit Cortex-M0+ MCUs that target consumer, commercial, industrial, and automotive applications operating in electrically noisy environments. Background: A microcontroller (MCU) is a single-chip computer that integrates a CPU core, program and data memory, and programmable I/O peripherals. The Cortex-M0+ core is ARM's smallest and most energy-efficient 32-bit core, designed for deterministic real-time control. The PIC32CM MC family layers Microchip's peripheral IP (SERCOM-style serial communication modules, motor-control PWM/timers, and LIN-capable UARTs) on top of the Cortex-M0+ and targets applications such as BLDC/PMSM motor drive, LIN slaves, and robust industrial sensors. In the broader component taxonomy, this part sits under MCU -> microcontroller -> ARM Cortex-M -> 32-bit MCU -> embedded computing. Key features of this part include an ARM Cortex-M0+ core running up to 48 MHz, 128 KB of Flash program memory, 16 KB of SRAM, dedicated motor-control peripherals (PWM, analog comparators, and fast ADC), the SERCOM-configurable serial block (UART/SPI/I2C), LIN support, and an industrial-grade -40C to +125C junction-temperature range denoted by the 'E' (extended) temperature grade suffix. It is supplied in a 7 mm x 7 mm 48-pin TQFP (Y8X) package. Architecturally, the device combines the Cortex-M0+ core's 32-bit Thumb-2 instruction set and single-cycle IO with Microchip's event system and motor-control PWM. This combination allows deterministic low-latency control loops for sensorless BLDC or brushed DC motor drive, while still offering low active and sleep currents for energy-sensitive applications. Typical applications include BLDC/PMSM motor control (small fans, pumps, e-bike hub drives), LIN-bus body-comfort and sensor nodes in automotive, consumer white goods (washing machines, refrigerators), industrial sensor conditioning, and secure IoT endpoints that benefit from the MC family's safety/security peripherals. Design tip: Because the part operates up to +125C junction temperature, validate thermal headroom in enclosed motor housings. Use the on-chip op-amps and comparators to sense motor current directly and feed the fast ADC to close the current loop inside a single PWM period. This page synthesizes distributor pricing, same-brand drop-in alternatives, and practical motor-control design notes - content not found on the standalone manufacturer datasheet.

询价 联系我们
PIC32CM1216MC00048T-I/Y8X - 48MHz Cortex-M0+ MCU, 128KB Flash | Microchip
PIC32CM1216MC00048T-I/Y8X

PIC32CM1216MC00048T-I/Y8X - 48MHz Cortex-M0+ MCU, 128KB Flash | Microchip

The Microchip PIC32CM1216MC00048T-I/Y8X is a 32-bit ARM Cortex-M0+ microcontroller from the PIC32CM MC family, featuring 128KB of Flash, 16KB of SRAM, and 4KB of EEPROM, operating at up to 48 MHz in a 48-pin TQFP (7x7 mm) package. The device is designed for motor-control and noisy-environment applications, integrating SERCOM modules, a 12-bit ADC, a 16-bit DAC, and CAN-FD support. It operates across a wide 2.7 V to 5.5 V supply range and is rated for the industrial -40C to +85C temperature range. An ARM Cortex-M0+ microcontroller (MCU) is a low-power, low-gate-count 32-bit processor core designed for embedded applications that need deterministic interrupt behaviour and ease of programming. MCUs sit at the bottom of the processor hierarchy: microcontroller -> embedded processor -> semiconductor -> integrated circuit. The Cortex-M0+ variant favours minimal silicon area, simplified instruction set (Thumb-2 subset), and ultra-low sleep current, making it a common choice for sensor nodes, BLDC fan/pump control, and human-machine interface (HMI) peripherals where cost and energy matter more than raw throughput. Key features of the PIC32CM1216MC00048T-I/Y8X include 128 KB Flash, 16 KB SRAM, 4 KB EEPROM, a 12-bit ADC, a 16-bit DAC, two analog comparators, a CAN-FD interface, and multiple SERCOM-configurable serial channels. The 48 MHz CPU frequency delivers 0.9 DMIPS/MHz (Coremark equivalent ~38) while keeping active power consumption low. Integrated motor-control PWM and quadrature encoder interfaces (QEI) directly support BLDC, PMSM, and stepper designs without external logic. Architecturally, the device combines a Cortex-M0+ core with Microchip's peripheral set, including Event System for inter-peripheral signalling without CPU intervention, Direct Memory Access (DMA) for low-overhead data movement, and SleepWalking peripherals that wake selected blocks while the core remains idle. The on-chip voltage regulator supports single-supply 5 V operation, eliminating the need for external level shifters in 5 V systems and easing migration from legacy PIC16/PIC24 designs. Typical applications include BLDC motor drives, HVAC fan control, home appliances (washing machines, refrigerators), industrial sensors, building automation, and automotive body modules. The PIC32CM MC family is purpose-built for motor-control loops where deterministic PWM timing, fast ADC sampling, and CAN-FD communication must coexist. When designing with this MCU, allocate at least one decoupling capacitor pair (100 nF + 1 uF) per VDD pin and keep the trace length under 5 mm to ensure ADC accuracy. Use the ICSP/SWD pins for in-circuit programming and reserve a 4.7 kohm pull-up on the RESET line for reliable debug-session re-entry. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the standalone manufacturer datasheet, enabling engineers to evaluate sourcing risk and PCB reuse before committing to a design.

询价 联系我们
PIC32CM2532LS60048-I/U5B - 48MHz Cortex-M23 MCU 512KB Flash | Microchip
PIC32CM2532LS60048-I/U5B

PIC32CM2532LS60048-I/U5B - 48MHz Cortex-M23 MCU 512KB Flash | Microchip

The Microchip Technology PIC32CM2532LS60048-I/U5B is a 32-bit ARM Cortex-M23 microcontroller running at 48 MHz with 512 KB (256K x 16) of Flash and 32 KB of SRAM, integrated with hardware security and an advanced touch sensing peripheral, housed in a 48-pin VQFN (7x7 mm) U5B package. It belongs to the PIC32CM LS00 family and operates across an industrial temperature range of -40C to +85C. What is a PIC32CM LS00 microcontroller? The PIC32CM LS00 is Microchip's ultra-low-power ARM Cortex-M23 MCU family that combines SleepWalking peripherals (event-driven wake-up without CPU intervention), industry-leading touch sensing hardware (PTC), and security features such as secure boot and cryptographic accelerators. Within the broader semiconductor taxonomy, PIC32CM LS00 belongs to the Cortex-M23 class of microcontrollers, which itself is a subset of ARM Cortex-M microcontrollers, then microcontrollers, then microprocessors, then integrated circuits. The LS00 sub-family is the secure-touch variant targeting human-machine interface and IoT edge applications. Key features include 512 KB dual-bank Flash with ECC, 32 KB SRAM, hardware crypto accelerators (AES, SHA, TRNG), up to 256 KB of user-programmable secure Flash, 12-bit 1 Msps ADC, and a Peripheral Touch Controller supporting buttons, sliders, and proximity sensors. The device integrates multiple serial interfaces (SERCOM configurable as UART/SPI/I2C), I2S, USB 2.0 Full-Speed device/host, and CAN-FD. Power consumption is engineered below 30 uA/MHz active and sub-uA in deep sleep. The architecture pairs the Cortex-M23 core (Armv8-M baseline, TrustZone for Cortex-M absent here) with Microchip's proprietary SleepWalking peripherals that wake only the minimum subsystem needed for an event, keeping average system current at the uA level. The dual-bank Flash with EEPROM emulation enables robust firmware updates and parameter storage. Typical applications include secure IoT edge nodes, capacitive touch user interfaces (buttons, sliders, wheels), home appliances with HMI panels, secure connected sensors with firmware update requirements, low-power wireless sensor gateways, and industrial control panels. The combination of low power and integrated touch makes it well suited for battery-powered smart devices requiring both clean user input and secure cloud connectivity. When designing with this device, pay attention to the U5B package thermal resistance and ensure the secure boot configuration bits are correctly programmed in NVM. For touch applications, follow the PCB layout guidelines in the device datasheet for sensor routing and ground flooding. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet alone.

询价 联系我们
PIC32CM2532LS60048T-I/U5B - 48MHz Cortex-M23 MCU, 256KB Flash | Microchip
PIC32CM2532LS60048T-I/U5B

PIC32CM2532LS60048T-I/U5B - 48MHz Cortex-M23 MCU, 256KB Flash | Microchip

The Microchip Technology PIC32CM2532LS60048T-I/U5B is a 32-bit ARM Cortex-M23 microcontroller in the PIC32CM LS60 family, integrating 256 KB of Flash, 32 KB of SRAM, and a 48 MHz CPU core in a 48-pin VQFN (7x7 mm) package. It supports the industrial operating temperature range of -40C to +85C and is supplied in Tape & Reel (TR) packaging, making it suitable for high-volume SMT production lines. A PIC32 microcontroller is a 32-bit MCU from Microchip's PIC family, built around the ARM Cortex-M23 core. Architecturally, Cortex-M23-based MCUs sit in the broader hierarchy of ARM Cortex-M processors (Cortex-M0 -> Cortex-M23 -> Cortex-M3/M4/M7), delivering a TrustZone-capable core with a single-cycle I/O port, deterministic interrupt handling, and excellent code-density versus 8-bit/16-bit MCUs. Within the PIC32 family, the LS60 sub-family adds Microchip's SleepWalking peripherals and ultra-low-power techniques, which are designed for battery-powered and energy-harvesting designs. Key features of the PIC32CM2532LS60048T-I/U5B include 256 KB of Flash program memory (organized as 256K x 16), 32 KB of SRAM data memory, an integrated touch Peripheral Touch Controller (PTC) supporting buttons, sliders and proximity sensing, and a smart analog integration that bundles operational amplifiers, ADCs, and DACs on-chip. The LS60 family's industry-leading low-power techniques (SleepWalking, Sleep on Exit, and Sleep in Standby modes) allow the CPU core to wake only when an analog or digital event occurs, which is critical for IoT edge nodes that spend most of their life in deep sleep. Typical applications include capacitive-touch user interfaces (touch buttons, sliders, proximity wake-up on appliances), battery-powered IoT sensor nodes, secure connected devices leveraging Cortex-M23 TrustZone, smart-home and building-automation endpoints, and human-machine interface (HMI) panels. The compact 7x7 mm VQFN-48 footprint also supports space-constrained wearables and handheld industrial tools. When designing with this MCU, plan the PCB layout for the exposed pad of the VQFN-48 (U5B suffix); it must be soldered to a ground pour to meet thermal and electrical performance. Configure the PTC acquisition timing in MPLAB X IDE with the Start Now / Configurable Touch (snctc) library, and verify the supply-rail decoupling network (typically 1x 10 uF + 2x 100 nF) before locking the BOM.

询价 联系我们
PIC32CM2532LS60064-I/5LX - 48MHz Cortex-M23 MCU | Microchip
PIC32CM2532LS60064-I/5LX

PIC32CM2532LS60064-I/5LX - 48MHz Cortex-M23 MCU | Microchip

The Microchip Technology PIC32CM2532LS60064-I/5LX is a 32-bit ultra-low-power ARM Cortex-M23 microcontroller from the PIC32CM LS60 family, integrating 256 KB Flash, 32 KB SRAM, security features, and enhanced touch peripherals into a 64-pin VQFN (5LX) package measuring 9x9 mm. The device operates from a 2.0V to 3.63V supply at up to 48 MHz, with industrial temperature range of -40C to +85C. A 32-bit microcontroller (MCU) is a system-on-chip integrating an ARM Cortex processor core, program Flash, data SRAM, and a rich set of analog and digital peripherals into a single silicon die. The Cortex-M23 core used here is the smallest, most energy-efficient ARMv8-M implementation, with TrustZone-M security extensions, a single-cycle hardware multiplier, a hardware divider, and a Nested Vector Interrupt Controller. The PIC32CM LS60 family sits inside the broader PIC32CM Lx security/ultra-low-power hierarchy, between the LE00 (low-power entry) and LS00 (low-power + security) variants, optimized for IoT, consumer, medical, and industrial applications. Key features include 2.64 CoreMark/MHz and 1.03 DMIPS/MHz, SleepWalking peripherals that wake the CPU on configurable events, integrated touch hardware, smart analog (12-bit ADC, DAC, comparators), and ARM TrustZone-M for firmware IP protection. The 256 KB Flash supports in-application programming, and the 32 KB SRAM provides deterministic real-time buffering. Memory Protection Unit (MPU) and unique device identity support secure firmware update schemes. Architecturally, the PIC32CM2532LS60064-I/5LX leverages an ARMv8-M baseline core with tightly coupled SRAM and Flash buses, enabling zero-wait-state execution at 48 MHz. The SleepWalking fabric allows peripheral events to be evaluated while the CPU and main clocks remain gated, dropping active current into the microampere domain and extending battery life in energy-harvesting or coin-cell designs. TrustZone-M partitions memory and peripherals into secure/non-secure worlds for credential protection. Typical applications include secure IoT end nodes with OTA firmware updates, capacitive-touch human-machine interfaces for appliances and consumer electronics, smart-home sensors and BLE/CAN/LIN bridges, battery-powered medical wearables requiring IEC 60730 class B safety support, and industrial control nodes needing deterministic low-latency GPIO. When designing with this part, evaluate the 5LX 64-pin VQFN thermal envelope and use a four-layer PCB with continuous ground pour beneath the exposed pad; the LS60 variant adds a crypto engine (AES/SHA/TRNG) and Secure Boot, so allocate sufficient Flash for the secure boot image.

询价 联系我们
PIC32CM2532LS60064-I/PT - 32-bit Cortex-M23 MCU, 256KB Flash, 64-TQFP | Microchip
PIC32CM2532LS60064-I/PT

PIC32CM2532LS60064-I/PT - 32-bit Cortex-M23 MCU, 256KB Flash, 64-TQFP | Microchip

The Microchip PIC32CM2532LS60064-I/PT is a 32-bit ARM Cortex-M23 microcontroller from the PIC32CM LS00 ultra-low-power family with 256KB Flash and 64KB SRAM, housed in a 64-pin TQFP package (10x10 mm). It runs at up to 48 MHz, integrates TrustZone-M security, SleepWalking peripherals, and enhanced touch hardware, and is positioned for battery-powered secure IoT edge nodes, HMI controls, and low-power wireless sensor hubs. A microcontroller (MCU) is a single-chip computer that integrates a CPU core, program and data memory, and a rich set of peripherals including timers, ADC/DAC, communication interfaces (UART/SPI/I2C), and GPIO. Cortex-MMC PIC32CM LS00 devices are ultra-low-power MCUs designed around the ARM Cortex-M23 core, the smallest and most energy-efficient Cortex-M processor with TrustZone-M optional hardware isolation. They sit in the hierarchy: Cortex-M23 -> ARM Cortex-M -> 32-bit RISC MCU -> embedded microcontroller -> integrated circuit. Key specifications: 256 KB Flash (256K x 16), 64 KB SRAM, 48 MHz maximum CPU clock, 64-pin TQFP (PT) package, 1.71V to 3.63V operating voltage, integrated 12-bit ADC, op-amps, DAC, and capture-compare PWMs. The device features SleepWalking peripherals that wake only the necessary sub-system while keeping the CPU asleep, plus a hardware crypto accelerator and secure boot. The 64-pin TQFP package provides 51+ GPIO pins and a 10x10 mm body suited for hand-solderable prototypes and low-density production boards. Typical applications: secure IoT sensor nodes, smart-home HMI touch panels, low-power wireless sensor hubs, secure BLE/wifi nodes, battery-powered data loggers, and industrial touch controls. The 256KB Flash accommodates Over-the-Air (OTA) update firmware plus dual-image secure boot, while 64KB SRAM allows modest protocol stacks (Zigbee, BLE, Matter) without external memory. Design tip: route the decoupling capacitors (100 nF + 1 uF) within 2 mm of each VDD/AVDD pin pair and use a continuous ground pour under the TQFP thermal pad to keep the ADC noise floor low. Use the integrated op-amps for sensor signal conditioning before the ADC to reduce BOM cost. This page synthesizes distributor pricing, drop-in same-package alternatives, and practical design notes not found in the manufacturer datasheet.

询价 联系我们
PIC32CM2532LS60064T-I/5LX - 48MHz Cortex-M23 MCU 256KB Flash | Microchip
PIC32CM2532LS60064T-I/5LX

PIC32CM2532LS60064T-I/5LX - 48MHz Cortex-M23 MCU 256KB Flash | Microchip

The Microchip Technology PIC32CM2532LS60064T-I/5LX is a 32-bit ARM Cortex-M23 microcontroller from the PIC32CM LS60 family, integrating 256 KB (128K x 16) of Flash, 32 KB of SRAM, and a 64-VQFN (9x9 mm) package with secure and enhanced touch peripherals. Operating at up to 48 MHz with 2.64 CoreMark/MHz and 1.03 DMIPS/MHz, it targets ultra-low-power embedded designs that also require hardware security and capacitive touch. What is a Cortex-M23 microcontroller? It is a low-power 32-bit microcontroller core from Arm built on the ARMv8-M baseline architecture, featuring a single-cycle hardware multiplier, hardware divider, Nested Vector Interrupt Controller (NVIC), and an optional Memory Protection Unit (MPU). The PIC32CM LS60 family adds SleepWalking peripherals and Arm TrustZone-M technology, allowing secure and non-secure code to coexist on the same die. Microcontrollers in this class serve as the central control hub in the system hierarchy: MCU -> microcontroller -> embedded controller -> semiconductor. Key features include 2.0V to 3.63V single-supply operation, integrated touch hardware with up to 256 touch channels, smart analog integration including 12-bit ADC, DAC, op amps, and comparators, plus cryptographic accelerators via TrustZone for secure boot and key storage. The device also features configurable SERCOM-like peripherals, DMA, and event system support. According to the Microchip PIC32CM LE00/LS00/LS60 family datasheet, the LS60 variant operates from -40C to +85C with up to 48 MHz core speed, while the LS00 variant supports 1.62V minimum VDD for deeper low-power operation. From an architecture standpoint, the device combines a Cortex-M23 core, tightly-coupled SRAM, embedded Flash with RWW support, and a peripheral event system that lets timers and I/O wake the CPU autonomously. This event-driven architecture is the foundation of the SleepWalking feature, which dramatically reduces average power consumption by keeping the core asleep until a peripheral event requires CPU attention. Compared to legacy PIC24/PIC32MX devices, the PIC32CM LS60 family delivers roughly 2x the CoreMark/mW efficiency at the cost of a more limited peripheral library. Typical applications include secure IoT sensor nodes, low-power wireless modules, touch-based consumer devices, smart metering, secure home appliances, and battery-powered industrial sensors. The combination of TrustZone-M and capacitive touch hardware makes the part particularly attractive for touch-sensitive secure terminals. When designing with this part, allocate sufficient PCB area for the 9x9 mm VQFN-64 thermal/exposed pad. Note that the LS60 variant requires a minimum 2.0V supply versus 1.62V for LS00, so designers using 1.8V rails should choose LS00 instead. TrustZone configuration requires careful linker-script planning to place secure code in the correct memory regions. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the standalone manufacturer datasheet.

询价 联系我们
PIC32CM2532LS60064T-I/PT - 32-bit ARM Cortex-M23 MCU 256KB Flash | Microchip
PIC32CM2532LS60064T-I/PT

PIC32CM2532LS60064T-I/PT - 32-bit ARM Cortex-M23 MCU 256KB Flash | Microchip

The Microchip Technology PIC32CM2532LS60064T-I/PT is a 32-bit ARM Cortex-M23 based microcontroller with 256KB Flash and 64-pin TQFP package, designed for ultra-low-power secure and enhanced-touch applications. It operates up to 48 MHz, integrates 256 KB Flash and 64 KB SRAM, and is supplied in a 64-pin TQFP (10x10 mm) industrial-grade surface-mount package. A microcontroller (MCU) is a single-chip computer containing a CPU core, program memory, working RAM, and configurable peripherals such as ADCs, timers, communication controllers, and GPIOs. The PIC32CM LS family belongs to the broader category of 32-bit microcontrollers -> ARM Cortex-M microcontrollers -> embedded processors -> integrated circuits, and is positioned in the system hierarchy between simple 8-bit MCUs and high-performance application processors. By integrating Cortex-M23 cores with TrustZone-M security and advanced peripherals, these MCUs reduce BOM cost and PCB footprint in IoT, industrial sensing, and human-machine interface (HMI) designs. Key features include hardware-based Arm TrustZone-M security, a touch-capable Peripheral Touch Controller (PTC), SleepWalking peripherals for event-driven wake-up, multiple SERCOM-based serial interfaces, a 12-bit ADC, and on-chip op-amps and DAC. The wide operating voltage range of 1.62V to 3.63V supports battery-powered designs, while the integrated voltage regulator and on-the-fly peripheral gating minimize active and standby power consumption to support multi-year battery life in IoT endpoints. Architecturally, the device couples an ARM Cortex-M23 core with Microchip's proprietary SleepWalking and Event System peripherals, allowing I/O events to wake the CPU without continuous polling. TrustZone-M isolation provides hardware-rooted secure boot, secure key storage, and CryptoCell-like accelerator hooks for AES/SHA, enabling designers to meet PSA Certified Level 1 / 2 security requirements without external secure elements. Typical applications include secure IoT sensor nodes, low-power wireless HMI controls, capacitive touch user interfaces, smart meters, and battery-powered industrial edge devices. The TQFP-64 footprint and -40C to +85C industrial temperature range suit harsh-environment deployments. When designing, prioritize SleepWalking configuration to minimize wake-up overhead, place the 0.1uF decoupling capacitor on each VDD pin within 3 mm, and use TrustZone-M secure/non-secure call gates to isolate credential handling. This page synthesizes distributor pricing, drop-in alternative MPNs, and practical design notes not consolidated in the manufacturer datasheet.

询价 联系我们
PIC32CM2532LS60100-I/PF - 48MHz Cortex-M23 MCU 256KB Flash | Microchip
PIC32CM2532LS60100-I/PF

PIC32CM2532LS60100-I/PF - 48MHz Cortex-M23 MCU 256KB Flash | Microchip

The Microchip Technology PIC32CM2532LS60100-I/PF is a 32-bit Arm Cortex-M23 microcontroller running at up to 48 MHz with 256 KB of Flash and 32 KB of SRAM, housed in a 100-pin TQFP package. It belongs to the PIC32CM LS60 family and integrates security features (LS60 suffix), enhanced touch sensing (hardware PTC), and ultra-low-power operation suitable for battery-powered and Human-Machine Interface (HMI) designs. A microcontroller (MCU) is a single-chip computer that integrates a CPU core, program memory (Flash), working memory (SRAM), and a rich set of peripherals (timers, ADC, communication controllers, GPIO) into one package. In the broader taxonomy, the PIC32CM2532LS60100-I/PF sits within Cortex-M23 -> ARM Cortex-M microcontroller -> 32-bit MCU -> microcontroller -> integrated circuit -> semiconductor. The Cortex-M23 core is the smallest and most energy-efficient ARMv8-M Baseline implementation, providing a hardware multiplier, hardware divider, NVIC, and optional Memory Protection Unit while preserving Thumb/Thumb-2 instruction efficiency. Key features of this device include: 48 MHz max CPU clock, 256 KB Flash, 32 KB SRAM, 2.0 V to 3.63 V operating voltage (LS60 variant), integrated Peripheral Touch Controller (PTC) for capacitive touch, SleepWalking peripherals that wake only the necessary logic blocks, multiple SERCOM (configurable serial communication) interfaces, a 12-bit ADC, and a hardware cryptographic accelerator supporting AES, SHA, and secure boot. Security extensions include true random number generation, secure firmware update, and immutable boot. Architecturally, the PIC32CM2532LS60100-I/PF combines an event-based peripheral fabric with SleepWalking DMA-style wake logic, allowing the core to remain in deep sleep while peripherals process events and trigger wake-ups only when meaningful thresholds are crossed. This makes it one of the most power-efficient Cortex-M23 MCUs in its class. Typical applications include secure IoT end nodes, capacitive touch user interfaces, smart home sensors, wearables, medical monitoring peripherals, and industrial control panels where both low power and security are required. When designing with this part, ensure your toolchain is MPLAB X IDE / MPLAB Harmony 3 based, and verify that your PCB layout respects the TQFP-100 thermal pad and decoupling guidance. Pinout compatibility with the non-secure PIC32CM2532LE00100-I/PF allows easy upgrade paths. This page synthesizes distributor pricing, drop-in alternatives, design notes, and FAQ content that go beyond the raw manufacturer datasheet to help engineers select, source, and design with this MCU confidently.

询价 联系我们
PIC32CM2532LS60100T-I/PF - 32-bit Cortex-M23 MCU, 256KB Flash | Microchip
PIC32CM2532LS60100T-I/PF

PIC32CM2532LS60100T-I/PF - 32-bit Cortex-M23 MCU, 256KB Flash | Microchip

The Microchip Technology PIC32CM2532LS60100T-I/PF is a 32-bit microcontroller built on the Arm Cortex-M23 core, running at up to 48 MHz with 256 KB of Flash and 32 KB of SRAM, housed in a 100-pin TQFP package. It integrates the PIC32CM LS60 family peripheral set including a 12-bit ADC, SERCOM interfaces, and a hardware multiplier/divider, delivering 2.64 CoreMark/MHz and 1.03 DMIPS/MHz efficiency for deterministic real-time embedded control. A microcontroller (MCU) is a single-chip computer that integrates a CPU core, non-volatile program memory (Flash), volatile working memory (SRAM), and a rich set of peripherals such as ADCs, timers, communication interfaces, and GPIOs. MCUs sit at the heart of nearly every embedded product - from simple sensor nodes to industrial motor controllers - and form the lowest layer of the embedded computing hierarchy: MCU -> SoC -> embedded system -> IoT endpoint. The Cortex-M23 is Arm's smallest, most energy-efficient TrustZone-capable core, designed for deterministic control with low active and sleep current. Key features of the PIC32CM2532LS60100T-I/PF include 256 KB Flash, 32 KB SRAM, a 12-bit 1 Msps ADC, multiple SERCOM modules configurable as UART/SPI/I2C, a 16-bit timer/counter array, and an on-chip debug interface (SWD). The wide 1.62V to 3.63V operating voltage (LS60 variant) supports direct Li-Ion battery coupling, eliminating external LDO stages in power-constrained designs. TrustZone for Armv8-M enables hardware-isolated secure firmware execution. Architecturally, the device uses a single-cycle hardware multiplier and hardware divider for fast DSP-style math, a Nested Vector Interrupt Controller (NVIC) for deterministic interrupt latency, and a Memory Protection Unit (MPU) for task isolation. The combination of Cortex-M23 efficiency with PIC legacy peripheral IP gives designers a familiar migration path from 8-bit PIC while gaining 32-bit performance and the broader Arm ecosystem (CMSIS, Keil/IAR/GCC toolchains, Harmony 3 framework). Typical applications include industrial sensor hubs, low-power IoT end nodes, BLE/LoRa companion MCUs, motor control BLDC drivers, building automation, and consumer human-machine interfaces. The PIC32CM2532LS60100T-I/PF is well suited for any design needing deterministic Cortex-M23 control with strong connectivity and TrustZone security. When designing with this device, plan the SWD debug access early - the SWD pins must remain accessible or be reassigned carefully, since they are shared with GPIO. Also reserve the NRST and verify VDD/VSS decoupling follows the 100-pin TQFP power pin map shown in the family datasheet. Use the MPLAB Harmony Configurator (MCC) for clock tree and peripheral setup to avoid manual register errors during bring-up. This page synthesizes distributor stock, drop-in same-family alternatives, and practical design notes not consolidated in the manufacturer datasheet.

询价 联系我们
PIC32CM5164LE00100-I/PF - 48MHz Cortex-M23 MCU, 512KB Flash | Microchip
PIC32CM5164LE00100-I/PF

PIC32CM5164LE00100-I/PF - 48MHz Cortex-M23 MCU, 512KB Flash | Microchip

The Microchip Technology PIC32CM5164LE00100-I/PF is an ultra-low-power 32-bit ARM Cortex-M23 microcontroller with 512 KB Flash and 64 KB SRAM, housed in a 100-pin TQFP (14x14 mm) package. It operates from 1.62V to 3.63V at up to 48 MHz core clock, delivering 1.03 DMIPS/MHz (Dhrystone) and 2.64 CoreMark/MHz while drawing only tens of microamperes in active mode. The device is part of the PIC32CM LE00 family, which integrates SleepWalking peripherals, hardware touch (PTC), and smart analog for sensor and HMI applications. A microcontroller (MCU) is an integrated circuit that combines a CPU core, program memory, data memory, and a rich set of programmable peripherals on a single die. The Cortex-M23 core is an ARMv8-M Baseline processor with single-cycle hardware multiplier, hardware divider, and a Nested Vector Interrupt Controller (NVIC) optimized for deterministic real-time response. This category hierarchy - MCU -> 32-bit MCU -> ARM Cortex-M microcontroller -> Microchip PIC32 family - is important for engineers searching by architecture or application class. Key features include 512 KB Flash (512K x 8), 64 KB SRAM, a 12-bit 1 Msps ADC, multiple SERCOM (USART/SPI/I2C), configurable Custom Logic (CCL), and a Peripheral Touch Controller supporting capacitive buttons, sliders, and proximity sensing. The device's SleepWalking mode lets peripherals wake the CPU only when a real event occurs, dramatically reducing average current in battery-powered sensor nodes. AEC-Q100 Grade 2 variants are also available in the LE00 family for automotive use. Typical applications include IoT end nodes, wearable fitness bands, smart-home sensor hubs, touch-enabled industrial control panels, low-power wireless sensor platforms (BLE/Zigbee host MCUs), and battery-powered medical monitoring devices. The 100-pin TQFP exposes 5 USART, 5 SERCOM, and up to 84 GPIO, enabling complex multi-bus designs without external expanders. Designers should plan decoupling carefully: place 100 nF + 4.7 uF ceramic capacitors within 5 mm of VDD pins, route the analog AVDD trace through a ferrite bead or L-C filter, and use a 4-layer PCB with a continuous ground plane for EMC. The optional but recommended trace on unused GPIO pads as analog inputs (disabled) prevents current leakage in deep-sleep modes. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet. Pricing reflects 100-unit breaks observed across authorized distributors.

询价 联系我们
PIC32CM5164LS00100-I/PF - 512KB Flash Cortex-M23 MCU | Microchip
PIC32CM5164LS00100-I/PF

PIC32CM5164LS00100-I/PF - 512KB Flash Cortex-M23 MCU | Microchip

The Microchip PIC32CM5164LS00100-I/PF is a 32-bit ARM Cortex-M23 microcontroller from the PIC32CM LS00 family, delivering 48 MHz CPU performance with 512 KB Flash, 64 KB SRAM and 8 KB EEPROM in a 100-pin TQFP (14x14 mm) package. The device integrates ultra-low-power techniques including SleepWalking peripherals, Arm TrustZone security, and enhanced touch hardware for HMI designs. A microcontroller (MCU) is a single-chip computer that combines a CPU core, non-volatile program memory (Flash), volatile working memory (SRAM), and configurable peripherals (GPIO, timers, ADC, communication interfaces) on one die. Within the embedded hierarchy, this PIC32CM part sits in the ultra-low-power 32-bit MCU tier, above 8-bit PIC MCUs and below high-performance Cortex-M4/M7 application processors. The Cortex-M23 core targets the lowest active power per MHz while keeping a Thumb-2 instruction set and TrustZone-M isolation. Key features include 80 general-purpose I/O, a 1.62 V to 3.63 V supply range, on-chip 12-bit ADC, multiple SERCOM (USART/SPI/I2C) channels, a hardware cryptographic module, and a peripheral touch controller that offloads touch scanning from the CPU. The LS suffix denotes the security-enhanced variant, while the LS00 sub-family emphasizes energy harvesting-ready sleep modes with sub-microamp standby currents. Technically, the die pairs a Cortex-M23 core with Microchip's proprietary SleepWalking event fabric, allowing peripherals to wake the core only on qualified events. TrustZone-M partitions Flash and SRAM into secure/non-secure regions for firmware IP protection, useful in connected-node applications. Typical applications include IoT end nodes, secure authentication tokens, low-power wireless sensor hubs, smart-home touch panels, industrial HMI keypads, and battery-powered metering. The 100-pin TQFP exposes enough I/O for color TFTs and parallel sensor buses. When designing, budget decoupling capacitors per the supply-rail count and verify SleepWalking event configuration against your wake-up latency budget. This page synthesizes distributor pricing, drop-in PIC32CM family alternatives, and practical design notes not consolidated in the Microchip datasheet.

询价 联系我们
PIC32CM5164LS60048-I/U5B - 512KB Flash Cortex-M23 MCU | Microchip
PIC32CM5164LS60048-I/U5B

PIC32CM5164LS60048-I/U5B - 512KB Flash Cortex-M23 MCU | Microchip

The Microchip Technology PIC32CM5164LS60048-I/U5B is a 32-bit secure Arm Cortex-M23 microcontroller with 512KB Flash and integrated Trust Platform security (ATECC608), housed in a 48-pin VQFN package with exposed pad. It operates from 2.0V to 3.63V at up to 48 MHz, delivering 2.64 CoreMark/MHz and 1.03 DMIPS/MHz efficiency. The device integrates ultra-low-power SleepWalking peripherals, Arm TrustZone technology, and immutable secure boot for hardened IoT edge nodes. A microcontroller (MCU) is an integrated circuit that combines a CPU core, memory (Flash, SRAM), and programmable peripherals on a single die. Cortex-M23 is an Armv8-M Baseline architecture core optimized for energy efficiency and deterministic interrupt response in deeply embedded applications. Within the system hierarchy, this part sits at the MCU level: MCU -> embedded microcontroller -> semiconductor IC. The LS60 family is Microchip's top-tier PIC32CM variant, adding hardware cryptography and secure element integration on top of the standard LS00 feature set. Key features include 512KB Flash, 64KB SRAM, up to 48 MHz CPU speed, integrated ATECC608 secure element, TrustZone for Cortex-M, secure boot with immutable root of trust, SleepWalking peripherals, PTC (Peripheral Touch Controller) for capacitive touch, and a 12-bit 1 Msps ADC with up to 16 channels. The device also supports up to 6 SERCOM (serial communication) interfaces configurable as I2C/SPI/UART, and integrates a 24-bit Sigma-Delta ADC option for precision sensing. Architecturally, the LS60 family uses a low-leakage process technology combined with multiple low-power modes (IDLE, STANDBY, BACKUP, OFF) and event-driven SleepWalking that wakes the CPU only when a peripheral requires service. This enables years of battery life on coin-cell powered IoT endpoints. The 48-pin VQFN package with exposed pad supports efficient thermal dissipation for continuous-duty industrial applications. Typical applications include secure IoT endpoints, smart home and building automation, smart metering, electronic locks and access control, wireless sensor nodes, medical wearables, secure payment terminals, and industrial HMI with touch. TrustZone plus ATECC608 make it especially suited to any application requiring certificate-based authentication, secure firmware update, and protection against physical tamper. Design consideration: when migrating from LS00 to LS60, verify that TrustZone-aware firmware and ATECC608 provisioning are integrated into your secure-boot chain, otherwise the security features cannot be exercised. Plan for an extra I2C or GPIO to interface to the secure element during provisioning. This page synthesizes distributor stock signals, same-family pin-compatible variants, cross-brand benchmarks, and practical low-power design notes not collected on a single manufacturer page.

询价 联系我们
PIC32CM5164LS60048T-I/U5B - Secure Cortex-M23 MCU, 512KB Flash | Microchip
PIC32CM5164LS60048T-I/U5B

PIC32CM5164LS60048T-I/U5B - Secure Cortex-M23 MCU, 512KB Flash | Microchip

The Microchip Technology PIC32CM5164LS60048T-I/U5B is a 32-bit secure microcontroller built on the Arm Cortex-M23 processor core with 512 KB of Flash and 64 KB of SRAM, housed in a 48-pin VQFN package with an exposed thermal pad. The PIC32CM LS60 family integrates hardened security features including Trust Platform ATECC608, Arm TrustZone technology, immutable secure boot, and secure key storage, while delivering ultra-low-power operation, advanced touch sensing, and smart analog integration in a single device. A secure MCU is a microcontroller that integrates hardware root-of-trust, cryptographic accelerators, secure boot, and tamper detection directly into the silicon so that firmware, keys, and runtime data can be protected against physical and remote attacks. Secure MCUs belong to the broader category of microcontrollers within the embedded processor hierarchy, sitting between general-purpose MCUs and dedicated security ICs such as TPMs and SE chips. They are essential in IoT and edge devices where the device identity, firmware integrity, and credential storage cannot be left to software alone. Key features include a Cortex-M23 core running up to 48 MHz, 512 KB of Flash program memory, 64 KB of SRAM, an integrated ATECC608 Trust Platform, Arm TrustZone for Cortex-M, secure boot with immutable root of trust, multiple low-power modes with SleepWalking peripherals, an advanced touch controller supporting self- and mutual-capacitive sensing, a 12-bit ADC, op-amps, DACs, and comparators, plus USB and SERCOM interfaces. These features enable connected, touch-enabled products that must meet modern IoT security requirements without sacrificing energy efficiency. The architecture pairs an ARMv8-M baseline core with single-cycle I/O access and a peripheral event system that allows autonomous data movement between ADC, DAC, and crypto blocks without CPU intervention, lowering active current and reducing wake cycles. Security logic, signal chain integrity, and analog subsystems share a low-noise internal voltage rail, which improves ADC SNR and stabilizes touch measurement under dynamic load. Typical applications include secure IoT end nodes, smart locks and access control, smart home hubs with touch panels, connected health wearables, industrial sensor nodes with signed firmware, and Matter/Thread/Zigbee edge devices. Designers favor this part when an integrated secure element, low power, and capacitive touch are all required in a compact 48-pin QFN footprint. When designing with this device, allocate PCB area for the exposed thermal pad and provide direct solder connection to the inner ground plane for heat spreading. Place the ATECC608 I2C lines as short as possible to the MCU and add 4.7 kohm pull-ups to the host supply; for USB, the internal pull-up and D+/D- traces must be 90 ohm differential and length-matched.

询价 联系我们
PIC32CM5164LS60064-I/5LX - 512KB Flash Cortex-M23 MCU with TrustZone | Microchip
PIC32CM5164LS60064-I/5LX

PIC32CM5164LS60064-I/5LX - 512KB Flash Cortex-M23 MCU with TrustZone | Microchip

The Microchip Technology PIC32CM5164LS60064-I/5LX is a 32-bit ARM Cortex-M23 microcontroller from the PIC32CM LS60 family, integrating 512 KB Flash and 64 KB SRAM in a 64-pin VQFN (5LX) package with hardened security and ultra-low-power peripherals. It operates from 2.0V to 3.63V at up to 48 MHz core clock across -40C to +85C, delivering 2.64 CoreMark/MHz and 1.03 DMIPS/MHz with single-cycle hardware multiplier, hardware divider, NVIC and Memory Protection Unit. A microcontroller (MCU) is a single-chip computer that integrates a CPU core, volatile memory (SRAM), non-volatile memory (Flash), and a rich set of peripherals such as timers, communication interfaces, ADC/DAC, and GPIO. Within the broader semiconductor hierarchy, an MCU sits between a microprocessor (MPU, which requires external memory and peripherals) and a system-on-chip (SoC, which adds application-specific accelerators). The Cortex-M23 core specifically targets low-power, deterministic embedded applications that benefit from the ARMv8-M baseline architecture, including TrustZone for ARMv8-M and the Cortex-M23 instruction subset, while preserving bit-band-free deterministic interrupt latency. Key features of the PIC32CM5164LS60064 include an integrated Trust Platform ATECC608 secure element, Arm TrustZone for hardware-isolated secure/non-secure firmware domains, immutable root-of-trust secure boot, innovative SleepWalking peripherals that allow I/O and analog blocks to operate autonomously while the CPU remains asleep, industry-leading water-tolerant touch sensing, on-chip op amps, and a 12-bit ADC with up to 1 Msps conversion rate. The device family also integrates DAC, comparators and zero-crossing detectors. Architecturally, the LS60 variant extends the lower-power LE/LS00 line with the embedded ATECC608 secure element and full TrustZone support, enabling secure key storage, ECDSA/Boot verification, and tamper detection. Compared with Cortex-M0+ designs, the M23 adds hardware divide, faster interrupt entry, and deterministic Thumb-only instruction execution, making this part well-suited to IoT edge nodes, secure authentication endpoints, and human-machine-interface panels. Typical applications include secure IoT end nodes, home and building automation controllers, smart appliances with capacitive touch HMIs, wireless sensor hubs pairing with external radios, low-power medical wearables, and industrial HMI panels. When designing with this part, allocate the 64-pin VQFN land pattern early because the 5LX variant is the largest 64-pin option in the family and a smaller 48-pin VQFN (U5B) or 64-pin TQFP (PT) layout would require pin remapping.

询价 联系我们
PIC32CM5164LS60064-I/PT - 512KB Flash 64KB SRAM Cortex-M23 MCU | Microchip
PIC32CM5164LS60064-I/PT

PIC32CM5164LS60064-I/PT - 512KB Flash 64KB SRAM Cortex-M23 MCU | Microchip

The Microchip Technology PIC32CM5164LS60064-I/PT is a 32-bit microcontroller from the PIC32CM LS60 family, built around an Arm Cortex-M23 core and packaged in a 64-pin TQFP (PT). It integrates 512 KB Flash and 64 KB SRAM, hardened security (TrustZone for Armv8-M and embedded ATECC608 Trust Platform), ultra-low-power peripherals, superior touch sensing, and smart analog in a single device aimed at connected, secure, battery-aware embedded designs. A 32-bit microcontroller (MCU) is a programmable System-on-Chip that combines a processor core, non-volatile program memory (typically Flash), volatile working memory (SRAM), and a rich peripheral set on one die. Modern MCUs sit at the hierarchy MCU -> embedded controller -> semiconductor. Cortex-M23 specifically is the smallest Armv8-M core with TrustZone security extensions, positioned between Cortex-M0+ (basic) and Cortex-M4 (DSP+FPU), making it ideal for low-power secure IoT endpoints. Key features of this part include 512 KB Flash for firmware, 64 KB SRAM for working data, TrustZone isolation, hardware crypto accelerators via ATECC608, up to 64 KB EEPROM emulation, multiple SERCOM-configurable peripherals (USART, I2C, SPI), 12-bit ADC with up to 16 channels, and integrated touch controller hardware with driven shield support for robust proximity sensing. The 64-pin TQFP offers ample I/O for human-machine interface and mixed-signal designs. Architecturally, the device uses an ultra-low-power architecture featuring multiple sleep modes (IDLE, STANDBY, BACKUP with full RAM retention), an Event System for autonomous peripheral interaction without CPU wake-up, and a Sleepwalking Peripheral System. The integrated ATECC608 Trust Platform provides immutable secure boot, secure key storage, and cryptographic authentication. Typical applications include secure IoT endpoints (TLS-authenticated sensors, smart locks), consumer HMI with touch (appliance panels, smart thermostats), industrial sensor hubs with secure firmware update, battery-powered wearables, and home automation bridges. The combination of low-power sleep modes and TrustZone security makes it especially compelling for always-on edge nodes that must authenticate cloud connections without draining battery reserves. When designing with this part, choose a toolchain from MPLAB X (XC32 compiler) and configure TrustZone from project initialization. Plan the pinout around the integrated touch channels if you intend to use driven shield, and budget Flash/RAM to leave room for a secure bootloader image in the secure region. This page synthesizes distributor availability, parametric drop-in alternatives, and practical design notes beyond the manufacturer datasheet - including pinout, comparison, and TrustZone-aware design tips not always consolidated in the device brief.

询价 联系我们