集成电路

子分类

📁 ADC/DAC 2518 产品 📁 放大器IC 793 产品 📁 音频编解码器 16 产品 📁 音频IC 2 产品 📁 时钟与计时 287 产品 📁 DSP 962 产品 📁 数据采集IC 2 产品 📁 数字电位器 4 产品 📁 显示驱动与控制器 1 产品 📁 FPGA与CPLD 6666 产品 📁 接口IC 1568 产品 📁 LED驱动器 1 产品 📁 逻辑IC 305 产品 📁 存储IC 875 产品 📁 微控制器 18688 产品 📁 微处理器 4 产品 📁 电机驱动器 1 产品 📁 其他 1 产品 📁 Sensor and Detector Interfaces 1 产品 📁 专用IC 15 产品 📁 视频IC 13 产品

产品（32725)

PIC32MX564F128HT-I/MR - 32-bit 80MHz MCU 128KB Flash USB CAN | Microchip
PIC32MX564F128HT-I/MR

PIC32MX564F128HT-I/MR - 32-bit 80MHz MCU 128KB Flash USB CAN | Microchip

The Microchip Technology PIC32MX564F128HT-I/MR is a 32-bit MIPS32 M4K microcontroller running at 80 MHz with 128 KB of Flash and 32 KB of SRAM, housed in a 64-pin VQFN (9x9 mm) package with an exposed thermal pad. It integrates Full-Speed USB 2.0 (Device/Host/OTG), a CAN 2.0B controller, four DMA channels, and a 16-bit parallel master port, targeting applications that need rich connectivity on a single chip. A PIC32MX-series MCU is a 32-bit microcontroller based on the MIPS32 M4K core, combining high processing throughput (80 MIPS at 80 MHz) with deterministic peripheral behaviour and the MPLAB X ecosystem. The PIC32MX5xx family sits between entry-level PIC32MX1xx/2xx parts and higher-end PIC32MX6xx/7xx parts, adding USB-OTG, CAN, and a parallel master port for external bus expansion - useful for industrial HMI, USB peripherals, and CAN-connected sensor nodes. Key features of the PIC32MX564F128HT-I/MR include 128 KB Flash, 32 KB SRAM, four DMA channels, a 10/12-bit ADC with up to 16 channels, two I2C, two SPI, two UART, one USB OTG, one CAN, and one PMP. The 'T' suffix denotes tape-and-reel packaging, 'I' denotes the -40C to +85C industrial temperature grade, and 'MR' identifies the 64-pin VQFN (9x9 mm) package. With 53 user I/O pins and a 2.3V to 3.6V supply range, the part balances connectivity and integration for mixed-signal designs. The architecture uses a 5-stage pipeline M4K core with single-cycle 32-bit ALU, hardware multiply/divide, and a tightly coupled prefetch module that smooths Flash access. Four-channel DMA offloads data movement between peripherals and RAM, freeing the core for protocol work. The USB-OTG and CAN blocks are independently clocked from the system bus, simplifying compliance testing. Typical applications include USB-to-UART bridges, CAN-connected industrial sensor nodes, graphical HMI panels using PMP-driven LCDs, embedded web servers, and small-form-factor IoT gateways. The combination of USB-OTG and CAN is particularly attractive for industrial bridges that need both PC connectivity and fieldbus communication. Designers should enable the exposed thermal pad (EP) and tie it to a clean ground pour to keep junction temperature within spec; the pad also reduces ground bounce on high-speed I/O. Use MPLAB X IDE and a PICkit 5 or ICD 4 programmer, and verify USB and CAN termination in layout review before prototype bring-up. This page synthesizes distributor pricing, drop-in same-family alternatives from the PIC32MX5xx series, and practical layout notes drawn from the Microchip datasheet and family reference manual, providing engineering value beyond the manufacturer datasheet alone.

USD $4.73 有现货
PIC32MX564F128HT-V/MR - 80MHz 32-bit MCU 128KB Flash 64-VQFN | Microchip
PIC32MX564F128HT-V/MR

PIC32MX564F128HT-V/MR - 80MHz 32-bit MCU 128KB Flash 64-VQFN | Microchip

The Microchip Technology PIC32MX564F128HT-V/MR is a 32-bit MIPS32 M4K RISC microcontroller with 128KB Flash and 32KB SRAM, housed in a 64-pin VQFN (9x9 mm) package with exposed thermal pad. It operates from 2.5V/3.3V and supports a maximum CPU clock of 80 MHz, integrating USB-OTG, CAN, 10-bit ADC and a 4-channel DMA controller in a single die. A 32-bit microcontroller (MCU) is a programmable system-on-chip that combines a CPU core, non-volatile program memory, volatile data memory and a set of on-chip peripherals behind a memory-mapped register interface. The PIC32MX5xx family extends Microchip's PIC architecture to a 32-bit MIPS32 instruction set, placing it in the broader hierarchy of MCU -> 32-bit MCU -> MIPS MCU -> Microchip PIC32 family. Compared with 8/16-bit MCUs, 32-bit parts deliver higher MIPS per MHz, larger linear address space and richer peripherals (USB, CAN, DMA), at the cost of higher active current and more complex toolchains. Key features include 128KB single-cycle Flash with prefetch, 32KB SRAM, 16-channel 10-bit ADC at up to 1 Msps, full-speed USB 2.0 On-The-Go, CAN 2.0B, four channels of DMA, and an 8-bit parallel master port for external memory or graphics. The 64-VQFN (9x9 mm) MR package provides an exposed thermal pad (EP) that must be soldered to the PCB ground plane for thermal dissipation and electrical reference. Architecturally the part is built around the MIPS M4K core with single-cycle hardware multiply/divide and a tightly-coupled prefetch controller that masks Flash wait states, allowing most instructions to execute in one clock at 80 MHz (1.56 DMIPS/MHz). On-chip regulators generate 1.8V core logic from 2.5V/3.3V I/O, so the user only supplies a single external rail. Typical applications include USB peripherals, industrial CAN nodes, multi-protocol bridges (USB-to-UART, USB-to-CAN), embedded data loggers, sensor hubs with DMA-driven ADC sampling, and low-cost graphical HMI controllers using the PMP interface. The integrated USB-OTG and CAN make the part particularly attractive for industrial control and automotive-body ECUs. When designing with this device, ensure the exposed pad (EP) is soldered to a continuous ground plane with multiple thermal vias; missing EP solder degrades thermal performance and DC ground reference. Decouple all VDD/VSS pairs with 100nF X7R placed within 3 mm of each pin pair. This page synthesizes distributor pricing, drop-in alternatives from the PIC32MX5xx family and practical design notes not found in the manufacturer datasheet alone.

USD $5.12 有现货
PIC32MX564F128HT-V/PT - 32-bit MCU, 128KB Flash, USB OTG, 64-TQFP
PIC32MX564F128HT-V/PT

PIC32MX564F128HT-V/PT - 32-bit MCU, 128KB Flash, USB OTG, 64-TQFP

The Microchip Technology PIC32MX564F128HT-V/PT is a 32-bit MIPS MCU based on the MIPS32 M4K core, delivering 80 MHz CPU performance with 128 KB Flash and 32 KB SRAM, housed in a 64-pin TQFP (10x10 mm) package. As a member of the PIC32MX5xx/6xx/7xx USB family, this device integrates USB OTG, 10-bit ADC, four DMA channels, and rich connectivity peripherals tailored for embedded connectivity, industrial control, and consumer applications. A microcontroller (MCU) is a single-chip computer containing a processor core, program memory (Flash), working memory (SRAM), and programmable peripherals. The PIC32MX564 family specifically belongs to the MIPS-based 32-bit PIC32 hierarchy, which scales up from 8-bit PIC microcontrollers into a higher-performance 32-bit architecture while remaining code-compatible with MPLAB Harmony and XC32 toolchains. Within the broader taxonomy, it sits as: microcontroller -> 32-bit MCU -> MIPS32 M4K architecture -> PIC32MX5xx family -> Microchip PIC32 portfolio -> embedded semiconductor category. Key features: 80 MHz max operating frequency with 80 MHz peripheral bus, 128 KB Flash (128K x 8) supporting live update, 32 KB SRAM, integrated USB 2.0 full-speed OTG with on-chip transceiver, four DMA channels for low-CPU-overhead transfers, 10-bit ADC with up to 16 channels and 1 Msps conversion rate, and up to five 16-bit timers/capture inputs. Communication interfaces include two I2C, two SPI, and four UART modules, providing flexible multi-protocol connectivity. Technical depth: the M4K core executes most instructions in a single cycle and includes a hardware multiply/divide unit plus DSP extensions. The memory map separates Flash, RAM, peripheral, and configuration regions, with configuration bits set during programming. The 'H' suffix in the part number denotes USB-capable silicon; 'T' indicates Tape and Reel packaging; the '-V' variant operates over -40C to +105C (V-grade), and 'PT' is the 64-pin TQFP package designator. Typical applications: USB peripherals and HID devices, industrial HMI panels, sensor aggregation nodes with DMA-driven sampling, low-cost CAN/USB bridges (companion USB host or CAN controller), and consumer audio/display controllers with USB firmware update. The wide peripheral set also makes it suitable for USB-bootloader-equipped industrial nodes that need field firmware updates over USB OTG. Design consideration: at 80 MHz the CPU draws roughly 70 mA from VDD; add bulk decoupling (10 uF) close to the package and per-pin 100 nF ceramics. USB OTG requires 0.1 uF on Vbus and careful PCB layout matching the on-chip transceiver reference design. This page synthesizes distributor pricing, drop-in same-package variants from the PIC32MX family, USB OTG design notes, and application guidance not consolidated in the manufacturer datasheet.

USD $6.10 有现货
PIC32MX564F128L-I/BG - 32-bit MCU 128KB Flash 80MHz USB/CAN | Microchip
PIC32MX564F128L-I/BG

PIC32MX564F128L-I/BG - 32-bit MCU 128KB Flash 80MHz USB/CAN | Microchip

The Microchip Technology PIC32MX564F128L-I/BG is a 32-bit MIPS MCU featuring 128KB Flash, 32KB SRAM, USB 2.0 full-speed OTG, CAN 2.0B, 80MHz core, and 53 I/O, packaged in a 121-pin TFBGA (10x10 mm) with exposed pad. Built on the MIPS32 M4K core with 5-stage pipeline and hardware multiply/divide, it targets embedded applications requiring USB and CAN connectivity with deterministic real-time performance. A microcontroller (MCU) is a single-chip computer that integrates a CPU, RAM, non-volatile memory (Flash), and peripherals on one die. The PIC32MX5xx family belongs to the broader taxonomy of microcontrollers -> 32-bit microcontrollers -> MIPS-based MCUs -> embedded microcontrollers -> semiconductor ICs. As a 32-bit MCU, it executes instructions in fixed-width 32-bit words, providing higher throughput than 8-bit or 16-bit alternatives like PIC16 and PIC24. Key features of the PIC32MX564F128L-I/BG include 128KB Flash program memory (128K x 8), 32KB SRAM data memory, four DMA channels, four 16-bit timers/counters, five 16-bit capture inputs, five 16-bit compare/PWM outputs, and a 16-channel 10-bit ADC with 1 Msps conversion rate. Communication peripherals comprise two I2C, two UART, and one USB 2.0 full-speed OTG controller with integrated PHY. The integrated CAN 2.0B module with 32 buffers supports automotive and industrial networking protocols. The PIC32MX564F128L-I/BG operates from 2.5V to 3.6V (typical 3.3V) and supports industrial temperature range -40C to +85C per the -I suffix. The 121-ball TFBGA package has 1.0mm ball pitch and includes a thermal pad for PCB ground plane dissipation. JTAG and 2-wire programming/debug interfaces are integrated for MPLAB X IDE development using the PICkit, ICD, or REAL ICE tools. Typical applications include industrial control via CANopen or DeviceNet, USB HID peripherals such as custom keyboards and data loggers, automotive body controllers requiring CAN bus, embedded graphics and HMI with external LCD controller, medical instrumentation with USB data transfer, and point-of-sale terminals combining USB and CAN. The integrated peripheral set reduces external component count while preserving real-time deterministic interrupt response. When designing with this device, ensure the 3.3V rail is well-regulated with low ripple; noise above 50mVpp can trigger brown-out resets. Use the exposed pad as a thermal and ground plane connection, and follow Microchip AN833 for high-speed USB PCB layout practices including 90-ohm differential impedance control and length matching on D+/D- traces. This page synthesizes Microchip datasheet data, distributor pricing, same-brand drop-in alternatives (F064L, F128H variants), and practical design notes not consolidated on any single distributor or manufacturer page.

USD $5.70 有现货
PIC32MX564F128L-V/BG - 32-bit MCU 128KB Flash USB OTG 121-TFBGA | Microchip
PIC32MX564F128L-V/BG

PIC32MX564F128L-V/BG - 32-bit MCU 128KB Flash USB OTG 121-TFBGA | Microchip

The Microchip PIC32MX564F128L-V/BG is a 32-bit MIPS microcontroller built on the MIPS32 M4K core, delivering 80 MHz of CPU performance, 128 KB of Flash program memory, and 32 KB of SRAM, integrated into a 121-ball TFBGA (10x10 mm) package. It is part of the PIC32MX5xx/6xx/7xx USB/CAN/Ethernet family designed for high-performance embedded applications. A 32-bit microcontroller (MCU) is a programmable integrated circuit that combines a 32-bit processor core, volatile memory (SRAM), non-volatile memory (Flash), and a rich set of peripherals (ADC, timers, communication interfaces, GPIO) in a single chip. PIC32 sits at the intersection of 32-bit performance and 8/16-bit MCU simplicity, making it well suited for bridging traditional embedded designs with higher-throughput applications such as USB, graphics, and connectivity. Key features of the PIC32MX564F128L-V/BG include integrated USB OTG (Full-Speed), two CAN 2.0b modules, 10-bit ADC with up to 16 channels, a 4-channel DMA controller, 5 timer/counters, two I2C, two SPI, and two UART modules. The device operates from 2.3V to 3.6V with an industrial-grade -40C to +105C temperature range (note: the V/BG variant denotes the V temperature grade of -40C to +105C). It supports up to 85 GPIO pins mapped to the 121-ball TFBGA land pattern. Architecture-wise, the MIPS32 M4K core implements the MIPS32 Release 2 instruction set with a 5-stage pipeline, hardware multiply/divide, and a prefetch cache that hides Flash latency. The 128 KB Flash and 32 KB SRAM are accessed through a dedicated system bus that feeds the DMA engine, allowing high-bandwidth data movement between peripherals and memory without CPU intervention. Typical applications include industrial automation controllers, USB human-interface devices (HID), CAN-based automotive networks (body and chassis subsystems), medical instrumentation, and embedded connectivity gateways. The combination of USB OTG, dual CAN, and ADC in one package makes the PIC32MX564F128L-V/BG particularly attractive for industrial nodes that must bridge sensor data to a USB host or CAN bus. When designing with this part, allocate the 121-ball BGA routing budget early - 0.8 mm pitch requires microvia stack-up and controlled-impedance traces for USB. Decoupling must follow Microchip's recommended 0.1 uF + bulk capacitor placement around each power pin to ensure ADC accuracy and stable USB signaling. This page synthesizes distributor pricing, drop-in alternatives within the PIC32MX family, and practical BGA layout notes not collected on the manufacturer product page alone.

USD $6.95 有现货
PIC32MX564F128L-V/PT - 80MHz 32-bit MCU 128KB Flash USB OTG | Microchip
PIC32MX564F128L-V/PT

PIC32MX564F128L-V/PT - 80MHz 32-bit MCU 128KB Flash USB OTG | Microchip

The Microchip Technology PIC32MX564F128L-V/PT is a high-performance 32-bit MIPS M4K microcontroller operating at up to 80 MHz, integrating 128 KB Flash, 32 KB SRAM, USB OTG, CAN, and a 10-bit ADC with DMA in a 100-pin TQFP (PT) package. A PIC32MX microcontroller belongs to the 32-bit MCU family that bridges the gap between 8/16-bit microcontrollers and high-end application processors. Built on the MIPS32 M4K core, it executes most instructions in a single cycle, enabling 1.56 DMIPS/MHz performance. This places it in the broader taxonomy of MCU -> 32-bit MCU -> MIPS-based MCU -> general-purpose embedded controller, supporting applications ranging from industrial HMI to USB peripherals. Key features include up to 80 MHz core clock, 128 KB Flash program memory, 32 KB SRAM data memory, integrated Full-Speed USB 2.0 On-The-Go with PHY, two CAN 2.0B modules, sixteen 10-bit ADC channels at up to 1 Msps, four I2C, two UART, five SPI, four 16-bit timers, and a Parallel Master Port for graphics or external memory. The CTMU module supports capacitive sensing and time measurement, while the 100-pin TQFP package exposes 85 GPIO for expansive peripheral integration. Architecturally, the PIC32MX564F128L combines a Harvard bus, a hardware Multiply/Divide unit, and a 5-stage pipeline to deliver deterministic real-time response. The peripheral bus matrix (PBUS) routes the DMA engine and bus master ports to internal RAM and peripherals, enabling high-throughput I/O without CPU intervention. Code is fully compatible across the PIC32MX family, simplifying firmware portability. Typical applications include USB peripherals (HID, CDC, mass storage), industrial CAN nodes, low-cost graphics controllers with external SRAM, sensor hubs, and embedded web servers. USB OTG support makes it ideal as a host or device, while CAN is critical for automotive and industrial network nodes. When designing with this device, ensure the VODEN voltage range (2.3V to 3.6V) is respected and that decoupling capacitors are placed within 5 mm of each power pin. The internal 8 MHz oscillator is accurate enough for USB when paired with the USB PLL. This page consolidates distributor pricing, drop-in pin-compatible alternatives, and engineering design notes beyond what the manufacturer datasheet alone provides.

USD $5.05 有现货
PIC32MX564F128LT-I/PT - 80MHz 32-bit MCU 128KB Flash USB/CAN | Microchip
PIC32MX564F128LT-I/PT

PIC32MX564F128LT-I/PT - 80MHz 32-bit MCU 128KB Flash USB/CAN | Microchip

The Microchip Technology PIC32MX564F128LT-I/PT is a 32-bit MIPS32 M4K PIC microcontroller running at 80 MHz with 128 KB Flash and 32 KB RAM, packaged in a 100-pin TQFP (12x12 mm) and equipped with on-chip USB 2.0 full-speed and CAN 2.0B peripherals plus 4-channel DMA. According to the Microchip product listing, this device integrates 53 digital I/O, multiple serial interfaces (UART, SPI, I2C), a 10-bit ADC and 16-bit parallel master port, addressing connected-embedded designs that demand deterministic real-time response and peripheral-rich integration on a single die. A 32-bit microcontroller (MCU) is a microprocessor core combined with on-die Flash program memory, SRAM data memory and a peripheral set in a single integrated circuit. PIC32MX5xx parts sit in Microchip's PIC32 family, which targets the MIPS32 M4K architecture - bridging 8/16-bit PIC MCU scalability with 32-bit performance for USB, CAN, graphics and audio bridging applications. The hypernym hierarchy is: PIC32MX564 subfamily -> PIC32MX5xx family -> PIC32 series -> 32-bit MCU -> microcontroller -> integrated circuit -> semiconductor. Key features include a 32-bit MIPS M4K core with 1.56 DMIPS/MHz, hardware multiply/divide, 128 KB Flash (128K x 8), 32 KB SRAM, 4-channel DMA, full-speed USB 2.0 device/host/OTG, CAN 2.0B active, two I2C, two SPI, two UART, a 16-bit Parallel Master Port (PMP) for graphics/parallel memory and a 10-bit 1 Msps ADC. The 100-pin TQFP exposes 53 digital I/O lines, supporting multiple 5V-tolerant pins, hardware PMP bus and ICSP debugging. Technical depth: the M4K core executes most instructions in one clock, giving 80 MHz core operation ~80 MIPS sustained throughput, with single-cycle 32-bit multiply and hardware divide. The 4-channel DMA engine offloads peripheral-to-memory and memory-to-memory transfers, freeing the core for control code. The 16-bit PMP enables direct connection to graphical LCDs, parallel SRAM and FPGA slaves. The integrated USB PHY supports low-speed, full-speed and full-speed OTG modes without external transceivers in most configurations. Typical applications include industrial USB-to-CAN bridges, automotive infotainment subsystems (CAN node controllers), HMI panels with TFT LCDs using the Parallel Master Port, USB device/host bridges (barcode scanners, data loggers), and CAN-based sensor nodes. Designers select this part for code density advantages (one instruction per word vs 8-bit PIC) plus deterministic interrupt latency. Design considerations: the 100-pin TQFP requires a 4-layer PCB with thermal relief for the 80 MHz switching current; 0.1 uF ceramic decoupling is recommended within 5 mm of every VDD/VSS pair. For USB designs, route D+/D- as a 90 ohm differential pair and place the 48 MHz crystal within 5 mm of the OSC pins. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet.

USD $4.78 有现货
PIC32MX564F128LT-V/BG - 32-bit 80MHz 128KB Flash MCU | Microchip
PIC32MX564F128LT-V/BG

PIC32MX564F128LT-V/BG - 32-bit 80MHz 128KB Flash MCU | Microchip

The Microchip Technology PIC32MX564F128LT-V/BG is a 32-bit MIPS MCU from the PIC32MX5xx family, integrating 128 KB Flash and 32 KB SRAM in a 121-ball TFBGA (10x10 mm) package with USB-OTG, CAN, 10-bit ADC, and DMA. It runs at up to 80 MHz core clock, provides 85 I/O pins, and supports industrial and automotive-grade operating temperature ranges (the V suffix indicating -40C to +105C). A 32-bit microcontroller (MCU) is a single-chip computer built around a 32-bit data path and registers, allowing larger address spaces (>4 GB), richer instruction sets, and higher throughput than 8-bit or 16-bit MCUs. The PIC32MX family specifically uses the MIPS32 M4K core licensed from MIPS Technologies, combining Harvard-architecture performance with deterministic interrupt response. Within the broader taxonomy, the PIC32MX5xx belongs to: microcontroller -> embedded MCU -> 32-bit MCU -> MIPS MCU -> PIC32 -> PIC32MX5xx. It is suitable as a general-purpose embedded controller that bridges 16-bit PIC24/dsPIC performance with ARM Cortex-M3 alternatives. Key features include 128 KB Flash program memory, 32 KB SRAM, full-speed USB-OTG on-chip transceiver, CAN 2.0B module, 16-channel 10-bit 1 MSPS ADC, four DMA channels for CPU-offload data movement, two UART, two SPI, two I2C, five 16-bit timers/captures, and parallel master port. The device includes fail-safe clock monitoring, two internal oscillators (8 MHz and 31 kHz), a hardware real-time clock/calendar with alarms, and a watchdog timer with a dedicated RC oscillator. Pin compatibility with 16-bit PIC MCUs simplifies migration from dsPIC/PIC24 designs. The architecture pairs a 5-stage MIPS32 M4K pipeline with single-cycle hardware multiply/divide and a tightly-coupled prefetch cache, giving Dhrystone 2.1 performance of approximately 1.5 DMIPS/MHz. The 10-bit successive-approximation ADC plus four-channel DMA enables continuous analog sampling without CPU intervention, while USB-OTG and CAN together make the part a strong fit for industrial bridging nodes. Typical applications include USB peripherals (HID, CDC, MSD, audio), CAN-based automotive body controllers, industrial PLCs and sensor hubs, and medical instrumentation requiring deterministic USB connectivity. The wide peripheral set also fits smart-grid metering and HMI panels. Design tip: BGA packages require via-in-pad or microvia PCB processes; ensure the design rules for the TFBGA-121 footprint match Microchip's recommended land pattern and that the inner balls are inspected post-reflow using X-ray. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet.

USD $4.97 有现货
PIC32MX570F512H-50I/MR - 50MHz 512KB Flash MCU | Microchip
PIC32MX570F512H-50I/MR

PIC32MX570F512H-50I/MR - 50MHz 512KB Flash MCU | Microchip

The Microchip PIC32MX570F512H-50I/MR is a 32-bit microcontroller based on the MIPS32 M4K core, delivering 50 MHz / 83 DMIPS performance in a 64-pin QFN (9x9 mm) package. It integrates 512 KB of Flash program memory and 64 KB of SRAM, with two I2S and four SPI modules for codec and serial communications, USB 2.0 Full-Speed OTG, and a CAN 2.0B controller with DeviceNet addressing support. A 32-bit microcontroller (MCU) is a microprocessor that integrates CPU, RAM, non-volatile memory (Flash), and peripherals on a single silicon die. The PIC32MX family uses a Harvard-architecture MIPS32 core optimized for deterministic real-time control with single-cycle multiplication and hardware multiply-accumulate. Compared with 8-bit/16-bit MCUs, 32-bit devices like the PIC32MX570 enable richer HMI (human-machine interface) applications, larger protocol stacks (USB, CAN, TCP/IP), and more complex DSP-style signal processing, while still retaining the deterministic interrupt latency characteristic of PIC microcontrollers. Key features include Peripheral Pin Select (PPS) for flexible I/O mapping, a Parallel Master Port (PMP) with dual read/write buffers for graphics interfaces, three I2S/SPI modules, a 10-bit ADC, and a Charge Time Measurement Unit (CTMU) for capacitive touch sensing. The device operates from 2.3 V to 3.6 V across an industrial temperature range of -40°C to +85°C, and is suitable for audio playback, USB peripherals, and CAN-connected industrial nodes. The architecture combines a 5-stage MIPS pipeline with dedicated multiply/divide hardware and a zero-overhead hardware loop counter, enabling efficient execution of signal-processing routines. Up to 16 DMA channels reduce CPU load during high-throughput peripheral transfers, and the PMP can directly drive external parallel displays or memory-mapped peripherals without glue logic. Typical applications include USB audio devices (headsets, speakers, mixers), HMI panels with graphics displays and capacitive touch, CAN-connected industrial sensors, and embedded graphics controllers. The compact 64-pin QFN package and integrated USB-PHY-compatible pins simplify board layout for space-constrained consumer products. When designing with the PIC32MX570F512H-50I/MR, allocate a minimum 0.1 µF decoupling capacitor per VDD/VSS pin pair placed within 3 mm of the package, and provide a bulk capacitor of at least 4.7 µF near the VDDCORE pin. The device uses 2.3-3.6 V I/O; signals to 5 V logic require level translation. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet alone, helping engineers evaluate the PIC32MX570F512H-50I/MR against competing 32-bit MCU families.

USD $4.25 有现货
PIC32MX570F512H-50I/PT - 50MHz 512KB Flash MCU w/ USB & CAN | Microchip
PIC32MX570F512H-50I/PT

PIC32MX570F512H-50I/PT - 50MHz 512KB Flash MCU w/ USB & CAN | Microchip

The Microchip PIC32MX570F512H-50I/PT is a 32-bit MIPS32 M4K microcontroller running at up to 50 MHz (83 DMIPS), with 512 KB Flash and 64 KB SRAM in a 64-pin TQFP (10x10 mm) package, designed for industrial -40C to +85C operation. A microcontroller (MCU) is a single-chip computer that integrates a CPU core, program memory (Flash), data memory (SRAM), and peripherals such as timers, communication interfaces, and analog blocks. The PIC32MX570F512H belongs to Microchip's PIC32MX5xx family, which sits in the broader hierarchy of 32-bit MCU -> embedded processor -> semiconductor IC. This class of device is typically used when 8-bit MCUs lack the performance and when Linux-capable application processors are over-spec, occupying the sweet spot for connected consumer, industrial HMI, and audio processing designs. Key features include a USB 2.0 Full-Speed On-The-Go controller, a CAN 2.0B module with DeviceNet addressing, three I2S/SPI modules for audio codecs and serial communications, Peripheral Pin Select (PPS) for flexible signal routing, a Parallel Master Port (PMP) with dual read/write buffers for graphics interfaces, and a 10-bit ADC. The device supports 83 DMIPS, giving headroom for DSP-style inner loops on audio buffers or PID control loops. The MIPS32 M4K core is a 5-stage pipeline with hardware multiply/divide and a tightly-coupled prefetch buffer that delivers deterministic interrupt response - well-suited to USB Full-Speed isochronous audio streams. The integrated full-speed USB OTG transceiver eliminates the need for an external PHY, while the CAN 2.0B controller with DeviceNet filtering simplifies industrial networking integration. Typical applications include USB audio streaming devices (headsets, USB DACs), CAN-based industrial sensor nodes, HMI panels with PMP-driven TFT displays, and low-cost embedded web servers using the integrated 10/100 Ethernet MAC. The PIC32MX570F512H-50I/PT is also widely used in PIC32 Bluetooth LE audio accessory reference designs. When designing with this MCU, allocate one of the four available I2S modules to the audio data path, use the USB ID pin for OTG role detection, and place a 12 MHz crystal within 10 mm of the OSC1/OSC2 pins to keep the PLL loop stable. The 50 MHz / 50I suffix denotes industrial temperature range; choose the 40 MHz base variant for cost-sensitive consumer products.

USD $4.11 有现货
PIC32MX570F512H-I/MR - 50MHz 512KB Flash 32-bit MCU | Microchip
PIC32MX570F512H-I/MR

PIC32MX570F512H-I/MR - 50MHz 512KB Flash 32-bit MCU | Microchip

The Microchip PIC32MX570F512H-I/MR is a 32-bit microcontroller based on the MIPS32 M4K core, delivering up to 50 MHz / 83 DMIPS of processing performance with 512 KB of Flash and 64 KB of SRAM, housed in a 64-pin QFN (9x9 mm) package with exposed thermal pad. It integrates a Full-Speed USB 2.0 OTG controller, a CAN 2.0B module with DeviceNet addressing support, and three I2S/SPI modules for codec and serial communications. The suffix “I” designates the industrial -40C to +85C temperature range and “MR” designates the QFN-64 package. A 32-bit microcontroller (MCU) is an integrated circuit that combines a 32-bit processor core, program memory (Flash), data memory (SRAM), and a rich set of peripherals on a single die. The PIC32MX5XX family sits in Microchip's PIC32 lineup between microcontrollers (an application-specific family) and 32-bit MIPS microAptiv/M4K core architecture, optimized for mixed-control and connectivity applications such as HMI, audio playback, USB peripherals, and CAN-based industrial nodes. Compared with simpler 8/16-bit MCUs, the PIC32MX570 provides higher computational headroom plus integrated high-bandwidth peripherals. Key differentiating features include the Peripheral Pin Select (PPS) system that remaps most digital peripherals to virtually any I/O pin, a Parallel Master Port (PMP) with dual read/write buffers suited to drive TFT LCDs for graphics interfaces, a 16-channel 10-bit 1 Msps ADC, four SPI/I2S modules, five UART modules, and an integrated charge time measurement unit (CTMU) for touch sensing. The CTMU configuration combined with PPS reduces BOM cost by eliminating external muxes for capacitive-touch keypads. The architecture combines a 5-stage pipeline M4K core with single-cycle multiply, hardware multiply-accumulate, and tightly-coupled peripherals. The 512 KB Flash and 64 KB SRAM configuration supports full TCP/IP stacks (e.g., Microchip's MPLAB Harmony) plus USB host/device stacks concurrently, while the 16-bit parallel PMP bus can stream pixel data to a TFT at frame rates required for menus and audio UI. The 2.5V / 3.3V operating voltage is selected at Flash-programming time. Typical applications include USB audio/HID peripherals (USB headphone amps, MIDI controllers), CAN-connected industrial sensors, TFT-based HMI panels with touch, IoT gateways with USB device mode, and audio playback devices that decode MP3/AAC using libraries in Harmony. The PIC32MX570F512H-I/MR fits these because its USB OTG + I2S + CTMU + PMP combination replaces several discrete ICs. When designing with this device, allocate PPS pins carefully: most peripherals share pins via the PPS register map and a single function can only be mapped to one pin at a time. Use MPLAB Harmony or MPLAB Code Configurator to manage pin assignments and avoid conflicts between USB D+/D-, I2S word/clock, and PMP data/control lines. This page synthesizes distributor pricing, drop-in PIC32MX5XX family alternatives, and practical design notes not found in the manufacturer datasheet alone.

USD $4.32 有现货
PIC32MX570F512H-I/PT - 32-bit MCU, 512KB Flash, 64-TQFP | Microchip
PIC32MX570F512H-I/PT

PIC32MX570F512H-I/PT - 32-bit MCU, 512KB Flash, 64-TQFP | Microchip

The Microchip PIC32MX570F512H-I/PT is a 32-bit PIC32MX microcontroller built on the MIPS32 M4K core, delivering up to 50 MHz / 83 DMIPS of processing performance with 512 KB of Flash and 64 KB of SRAM in a 64-pin TQFP (10x10 mm) package. It integrates two I2S interfaces, four SPI modules, USB 2.0 full-speed, CAN, and a Parallel Master Port (PMP) with dual buffers for graphics interfacing, alongside Peripheral Pin Select (PPS) for flexible signal routing. A microcontroller (MCU) is a single-chip computer that integrates a CPU core, memory, and programmable peripherals onto one silicon die, used to embed control logic in everything from consumer appliances to industrial drives. The PIC32MX family belongs to the broader 32-bit MCU taxonomy (32-bit microcontroller -> RISC MCU -> embedded controller -> semiconductor IC). Within Microchip's portfolio, the MX5xx sub-family is positioned for HMI-rich designs (audio, graphics, touch sensing) where generous SRAM, USB, and CAN are required without migrating to a Cortex-M class device. Key features of the PIC32MX570F512H include 512 KB Flash with 12 KB auxiliary Flash, 64 KB SRAM, a 16-channel 10-bit ADC (1 Msps), five 16-bit timers, two comparators, two I2C modules, two UART modules, an RTCC, a CTMU for touch/keypad applications, and a JTAG-compatible debugging interface (ICSP). It also supports an internal 8 MHz oscillator with PLL scaling up to 50 MHz, reducing external crystal count on compact boards. Architecturally, the MIPS M4K core is a 5-stage pipeline RISC design with hardware multiply/divide and zero-overhead loops. Combined with the dual-buffer PMP, this allows the MCU to drive graphical displays while keeping CPU cycles available for application logic. USB and CAN peripherals each have dedicated DMA channels, offloading bus traffic from the core. Typical applications include USB audio docks, HMI panels with TFT displays and resistive touch, CAN-enabled industrial sensor nodes, and low-cost embedded graphics controllers for white goods. The wide operating voltage (2.3 to 3.6 V) and industrial temperature range (-40 °C to +85 °C for the I-grade variant) make it equally suited to indoor consumer and outdoor industrial enclosures. When designing with this part, plan the pin allocation using the PPS feature early, since most digital peripherals can be remapped to multiple I/O sets - this simplifies PCB routing when the same board is reused across variants. Ensure the 64-pin TQFP land pattern is matched by the selected footprint and that the trace lengths to the USB D+/D- lines are 90-ohm differential and kept under 50 mm for full-speed compliance. This page consolidates distributor stock and pricing, validated drop-in alternatives from the PIC32MX family, and practical design notes beyond what the manufacturer datasheet alone offers, helping engineers shorten sourcing and design cycles for new product builds.

USD $5.07 有现货
PIC32MX570F512H-V/PT - 32-bit MCU, 512KB Flash, USB, CAN | Microchip
PIC32MX570F512H-V/PT

PIC32MX570F512H-V/PT - 32-bit MCU, 512KB Flash, USB, CAN | Microchip

The Microchip Technology PIC32MX570F512H-V/PT is a 32-bit MIPS microcontroller based on the MIPS32 M4K core, delivering up to 50 MHz / 83 DMIPS of compute performance with 512 KB of Flash and 64 KB of SRAM, housed in a 64-pin TQFP (PT) 10x10 mm package with USB 2.0 Full-Speed OTG, CAN 2.0B, three I2S/SPI modules, Parallel Master Port (PMP), Peripheral Pin Select (PPS), and a Charge Time Measurement Unit (CTMU). A 32-bit microcontroller (MCU) is a single-chip computer that integrates a 32-bit CPU core, program and data memory, and a configurable set of peripheral interfaces (UART, SPI, I2C, USB, timers, ADC, etc.) into one device. PIC32MX570 devices sit in the broader hierarchy of MCU -> 32-bit MCU -> MIPS32 architecture -> Microchip PIC32 family -> PIC32MX5xx sub-family, and they target cost-sensitive applications that require USB and CAN connectivity alongside substantial code space. Key features include 512 KB single-voltage Flash with live update support, 64 KB SRAM, USB 2.0 Full-Speed On-The-Go controller, CAN 2.0B with DeviceNet addressing, three I2S/SPI modules for codec and serial communication, Parallel Master Port (PMP) with dual read/write buffers for graphics, Peripheral Pin Select (PPS) for flexible signal routing, and an integrated CTMU for capacitive touch sensing. The device operates from a 2.3 V to 3.6 V supply, includes a 10-bit 1 Msps ADC with up to 28 channels, multiple 16-bit timers, four UART channels, two I2C channels, and an RTCC. The -V/PT suffix denotes the V temperature grade (-40C to +105C) in the 64-pin TQFP (PT) package, suiting industrial and extended-commercial designs. Typical applications include USB audio interfaces, CAN-based industrial control nodes, HMI panels with touch sensing, graphics-enabled control boards, and USB/CAN bridging gateways. Its combination of USB, CAN, and ample Flash makes it a strong fit for connected industrial and embedded designs. When designing with this device, observe the decoupling guidance in the PIC32MX1XX/2XX/5XX 64/100-pin family datasheet: place 0.1 uF and 1 uF ceramics close to every VDD/VSS pair and route the USB DP/DM pair with 90 ohm differential impedance. The CTMU and PPS features must be configured in software before first use to ensure correct pin function assignment. This page synthesizes distributor pricing, AEC-Q100 grade comparisons, drop-in same-package alternatives, and practical design notes not consolidated on the manufacturer datasheet or distributor catalog pages.

USD $4.78 有现货
PIC32MX570F512HT-50I/PT - 50MHz 512KB Flash MCU | Microchip
PIC32MX570F512HT-50I/PT

PIC32MX570F512HT-50I/PT - 50MHz 512KB Flash MCU | Microchip

The Microchip Technology PIC32MX570F512HT-50I/PT is a 32-bit MIPS32 M4K microcontroller running up to 50 MHz / 83 DMIPS, integrating 512 KB Flash and 64 KB SRAM in a 64-pin TQFP (10x10 mm) package with industrial -40C to +85C temperature grade. The 'T' suffix indicates Tape and Reel packaging, while 'HT' denotes the 64-pin TQFP package and '50I' specifies 50 MHz operation with industrial temperature range. A microcontroller (MCU) is a single-chip computer that integrates a CPU core, program memory (Flash), data memory (RAM), and peripherals such as timers, communication interfaces, and analog blocks. The PIC32MX5xx family belongs to Microchip's PIC32 line, which combines MIPS M4K RISC architecture with rich peripheral integration, bridging 8/16-bit PIC microcontrollers and high-performance MPU-class devices. The MX570 sits in the mid-range Flash density tier (512 KB) with USB 2.0 full-speed OTG, two I2S, four SPI/I2S, PMP, and CTMU peripherals. Key features include 50 MHz / 83 DMIPS core performance, 512 KB Flash with 64 KB RAM, 49 I/O pins with Peripheral Pin Select (PPS) remappable functions, two I2S modules for audio codecs, four SPI and four I2C interfaces, USB 2.0 full-speed OTG with dedicated DMA, a 10-bit 1 Msps ADC with 28 channels, a Parallel Master Port (PMP) with dual buffers for graphics, a Charge Time Measurement Unit (CTMU) for capacitive touch, and a 16-bit Parallel Port. Hardware multipliers/Dividers and a 5-stage pipeline execute DSP-like operations efficiently. The architecture uses a Harvard-style 5-stage pipeline with separate instruction and data paths, plus a tightly coupled prefetch module that hides Flash latency. USB 2.0 full-speed OTG, two I2S interfaces, and PMP with dual buffers enable direct interfacing to audio CODECs, USB devices, and graphical LCDs without external logic, simplifying BOM. PPS remapping lets designers route digital functions to any GPIO pin, simplifying PCB layout and routing. Typical applications include industrial control panels, USB-capable embedded devices (HID, CDC, MSD), audio playback modules with I2S CODECs, low-cost graphical HMI with PMP-driven LCDs, capacitive touch user interfaces using CTMU, and IoT edge nodes requiring USB connectivity. The wide peripheral set is well suited to consumer and industrial products that need USB, audio, and graphics in a single chip. Design consideration: PPS remapping allows function-to-pin routing but each physical pin still has limited simultaneous function sets; verify the desired combination in the pin tables before committing to a pinout. For USB applications, the VBUS pin must be conditioned per the device errata and DP/DPU lines routed as a 90 ohm differential pair with proper guard traces. This page synthesizes distributor pricing, drop-in pin-compatible alternatives, and design considerations not found in the manufacturer datasheet, optimized for engineers selecting an MCU for USB + audio + graphics applications.

USD $4.41 有现货
PIC32MX570F512HT-I/MR - 32-bit MCU 512KB Flash 64KB RAM 50MHz 64-QFN | Microchip
PIC32MX570F512HT-I/MR

PIC32MX570F512HT-I/MR - 32-bit MCU 512KB Flash 64KB RAM 50MHz 64-QFN | Microchip

The Microchip Technology PIC32MX570F512HT-I/MR is a 32-bit MIPS MCU built on the MIPS32 M4K core, delivering up to 50 MHz / 83 DMIPS performance with 512 KB Flash and 64 KB RAM in a 64-pin QFN (9x9 mm) package. The part is tape-and-reel packaged, industrial temperature grade (-40C to +85C), and integrates USB 2.0 Full-Speed, CAN, and three analog comparators plus CTMU and RTCC peripherals. What is a PIC32MX MCU? The PIC32MX family from Microchip is a series of 32-bit microcontrollers based on the MIPS32 M4K architecture, sitting within the broader PIC microcontroller family. These MCUs bridge 8/16-bit PIC legacy to 32-bit performance, used in applications needing USB, CAN, and richer peripherals while staying within the MPLAB X / Harmony toolchain. They are widely adopted in industrial control, consumer audio, IoT edge nodes, and human-machine interface designs. Key features of the PIC32MX570F512HT-I/MR include two I2S interfaces for digital audio, four SPI modules, Peripheral Pin Select (PPS) for flexible signal routing, a Parallel Master Port (PMP) with dual read/write buffers for graphics interfaces, and a 10-bit ADC with up to 1 Msps conversion rate. The on-chip CTMU supports capacitive touch sensing and time measurement, while RTCC provides real-time clocking for low-power always-on domains. Architecturally, the device uses a 5-stage pipeline MIPS32 M4K core with hardware multiply/divide, single-cycle 32-bit ALU, and pre-fetch cache, executing most instructions in one clock cycle. The 512 KB Flash is organized as 256K x 16 with prefetch, and the 64 KB SRAM supports DMA access via four channels, offloading CPU bandwidth for high-throughput peripherals such as USB and PMP graphics. Typical applications include industrial HMI panels with TFT-LCD graphics via PMP, USB audio interfaces using I2S, automotive infotainment peripherals (CAN + USB), home automation gateways with capacitive touch keypads, and low-cost medical monitoring devices requiring RTCC timestamping. The wide peripheral mix makes it a strong fit for designs that need a single-chip controller with connectivity and a basic graphics engine. Designers should plan oscillator and decoupling layout carefully: the 50 MHz operation requires a stable crystal or external clock, and the QFN-64 ground pad must be soldered to a continuous ground pour for thermal dissipation and EMI suppression. Use MPLAB X IDE with XC32 compiler and configure PPS before assigning peripheral functions to physical pins. This page synthesizes distributor stock, pricing, drop-in replacement options, and engineering design notes not consolidated on the manufacturer datasheet - giving procurement and design engineers a single source for evaluation and BOM validation.

USD $4.78 有现货
PIC32MX570F512HT-I/PT - 32-bit 40MHz 512KB Flash MCU | Microchip
PIC32MX570F512HT-I/PT

PIC32MX570F512HT-I/PT - 32-bit 40MHz 512KB Flash MCU | Microchip

The Microchip Technology PIC32MX570F512HT-I/PT is a 32-bit MIPS32 M4K PIC microcontroller IC operating at up to 40 MHz, integrating 512 KB of flash and 64 KB of SRAM in a 64-pin TQFP (PT) 10x10 mm package, tape and reel packaged. According to Microchip datasheet DS60001357, the device targets the PIC32MX5xx/6xx/7xx family and offers USB 2.0 full-speed, CAN, two I2S, four SPI, PMP, and CTMU peripherals. This 'T' suffix variant ships on tape and reel for high-volume assembly. A 32-bit microcontroller (MCU) is an integrated circuit that combines a 32-bit CPU core, flash program memory, SRAM data memory, and configurable peripherals on a single die, sitting above 8/16-bit MCUs in processing capability while below microprocessors in system cost. The PIC32MX family belongs to the broader category of embedded microcontrollers, which in turn are part of the power management and digital IC ecosystem used in industrial, consumer, and IoT products. Within that taxonomy, PIC32MX570 devices are positioned for USB-connected and graphics-capable embedded designs. Key features include 83 DMIPS core performance, peripheral pin select (PPS) for flexible I/O mapping, parallel master port (PMP) with dual buffers for graphics, two I2S and four SPI modules for codec and serial communications, an integrated CTMU for capacitive touch, and a real-time clock/calendar (RTCC). The 64-pin TQFP package provides 5V-tolerant I/O on most pins and supports industrial temperature grades from -40C to +85C. Technically, the PIC32MX570F512HT-I/PT uses a 5-stage pipeline M4K core with single-cycle multiply and hardware divide, supported by a prefetch cache that boosts flash throughput. The 40 MHz version (the -I grade) operates at 3.3V and targets cost-sensitive general-purpose embedded designs, while the 50 MHz -50I grade in the same family offers higher throughput. PPS remapping means peripherals can be assigned to most digital I/O pins, simplifying PCB routing. Typical applications include industrial control panels, USB peripherals (HID, CDC, mass storage), embedded audio I2S bridges, CAN node interfaces, low-cost graphics displays, and capacitive touch human-machine interfaces. The integrated USB and CAN make it well-suited for industrial automation, point-of-sale terminals, and home appliances. When designing with this part, ensure the JTAG/ICD programming header follows Microchip's recommended 4-wire or 2-wire layout and that the USB D+/D- lines include proper 90-ohm differential routing. Pin-compatibility with PIC32MX570F512H-I/PT in the same TQFP-64 footprint enables direct placement on existing boards. This page synthesizes distributor pricing, drop-in alternatives from the same PIC32MX5xx family, and practical design notes not found in the manufacturer datasheet, sourced from Microchip product page DS60001357 and DigiKey catalog data as of 2026-10-03.

USD $5.42 有现货
PIC32MX570F512HT-V/MR - 32-Bit MCU, 512KB Flash, USB, CAN, 64-QFN | Microchip
PIC32MX570F512HT-V/MR

PIC32MX570F512HT-V/MR - 32-Bit MCU, 512KB Flash, USB, CAN, 64-QFN | Microchip

The Microchip Technology PIC32MX570F512HT-V/MR is a 32-bit microcontroller based on the MIPS32® M4K® core running at up to 50 MHz / 83 DMIPS, integrating 512 KB of Flash and 64 KB of SRAM in a 64-pin QFN (MR) 9x9 mm package. It operates from a 2.3 V to 3.6 V supply across the -40 °C to +105 °C industrial temperature range and delivers 83 DMIPS with single-cycle MAC 32x16 and two-cycle 32x32 multiply support, plus MIPS16e® code compression for up to 40 % smaller code size. What is a 32-bit PIC microcontroller? A PIC32MX-series MCU is a 32-bit flash microcontroller in Microchip's PIC32 family that combines a MIPS M4K core with rich digital peripherals, multiple analog modules (10-bit ADC, comparators, CTMU), and connectivity blocks (USB 2.0 Full-Speed, CAN 2.0B). It sits within the broader taxonomy of: PIC32MX5xx family -> PIC32MX family -> PIC32 32-bit MCU family -> microcontroller -> embedded processor -> semiconductor. This family targets mid-range connected-embedded designs that need more performance than PIC16/PIC24 parts but not the complexity of Cortex-M4 devices. Key features of the PIC32MX570F512HT-V/MR include: two I²S modules and four SPI interfaces for codec and serial peripherals, Parallel Master Port (PMP) with dual buffers for graphics and external memory, Peripheral Pin Select (PPS) for flexible signal routing, three analog comparators plus a Charge Time Measurement Unit (CTMU), Real-Time Clock and Calendar (RTCC), and full-speed USB 2.0 plus a CAN 2.0B module for industrial networking. The 64-QFN (MR) package with exposed pad delivers low thermal resistance for high-MIPS continuous operation. The PIC32MX570F512H architecture pairs a 5-stage pipeline M4K core with a multi-vector interrupt controller and a peripheral bus that runs independently of the CPU, allowing DMA-style data movement between the USB, CAN, and PMP blocks while the CPU executes application logic. The 512 KB Flash is large enough for USB stacks, TCP/IP, and graphics libraries common in HMI and connected-sensor designs, while the 64 KB SRAM supports full Ethernet or USB buffers with margin for RTOS workloads. Typical applications include industrial control panels with USB-CDC / CAN connectivity, low-cost HMI with graphics on PMP-driven TFTs, USB peripherals such as barcode scanners and POS terminals, automotive body and comfort modules (within the 105 °C thermal range), and sensor-hub / data-acquisition nodes that need CTMU touch and RTCC timestamping. Designers also use the PIC32MX570F512H in audio streaming bridges via the two I²S ports. When designing with this part, take care that the VDD/AVDD rails are well decoupled (one 100 nF per pin pair plus a 4.7 µF bulk) and that the 64-QFN exposed pad is soldered to a sufficient copper pour - the MR package's thermal performance depends on it. Confirm that the chosen -V suffix (-40 °C to +105 °C) matches your product's environmental spec; the -I grade (-40 °C to +85 °C) and the 50 MHz grade part PIC32MX570F512H-50I/MR are drop-in compatible siblings. This page synthesizes distributor pricing, drop-in alternatives within the same PIC32MX5xx QFN-64 family, and practical design notes not found in the manufacturer datasheet - giving procurement and firmware engineers a one-stop reference.

USD $5.15 有现货
PIC32MX570F512HT-V/PT - 50MHz 32-bit MCU 512KB Flash TQFP-64 | Microchip
PIC32MX570F512HT-V/PT

PIC32MX570F512HT-V/PT - 50MHz 32-bit MCU 512KB Flash TQFP-64 | Microchip

The Microchip Technology PIC32MX570F512HT-V/PT is a 32-bit MIPS32 M4K microcontroller operating at up to 50 MHz/83 DMIPS, with 512 KB Flash and 64 KB SRAM in a 64-pin TQFP (PT) package with extended -40C to +105C industrial operating temperature range. It integrates two I2S modules, four SPI modules, USB 2.0 full-speed device/host/OTG, two CAN modules, three analog comparators, a charge time measurement unit (CTMU), and a real-time clock/calendar (RTCC), enabling connected embedded designs in a single chip. A microcontroller (MCU) is a programmable processor with on-chip Flash program memory, SRAM data memory, and a rich set of peripherals (I/O, timers, communication controllers, ADCs) integrated into one package. The PIC32 family sits within Microchip's 32-bit portfolio under the broader PIC microcontroller line, following the MIPS32 architecture and supporting position in the hierarchy MCU -> 32-bit microcontroller -> embedded processor -> semiconductor IC. Key differentiating features include 512 KB Flash (twice the density of mid-range PIC32MX1/2/3 parts), dedicated USB and CAN hardware blocks eliminating external transceivers in many cases, Peripheral Pin Select (PPS) for flexible signal routing, and a Parallel Master Port (PMP) with dual buffers for graphics or external memory interfaces. The CTMU enables touch sensing and capacitive measurement applications without an external analog front end. Architecturally, the PIC32MX5 family uses a 5-stage pipeline MIPS M4K core with single-cycle multiply and hardware divide, supported by a 16 KB instruction cache and prefetch buffer. This balanced pipeline delivers 1.66 DMIPS/MHz efficiency at low power, with multiple low-power sleep modes managed by the on-chip Power Management Unit (PMU). Typical applications include USB peripherals (HID, CDC, mass storage), CAN-based industrial networking nodes, audio playback with I2S DAC interfaces, graphical HMI panels using PMP-driven LCDs, and IoT edge nodes requiring both USB and CAN connectivity. The integrated USB and CAN peripherals make this device a strong fit for bridging industrial and PC connectivity in compact form factors. When designing with this MCU, carefully review the PPS mapping table because most digital peripheral signals are remappable to multiple pins, and incorrect PPS locking is a common source of bring-up issues. Allocate at least one timer for the RTCC crystal startup delay and ensure the CTMU reference current is calibrated per application notes. This page consolidates distributor pricing, drop-in same-family alternatives, and design guidance that supplements the Microchip datasheet and family reference manual for engineers evaluating the PIC32MX5 platform.

USD $5.85 有现货
PIC32MX570F512L-50I/PT - 50MHz 512KB Flash MCU | Microchip
PIC32MX570F512L-50I/PT

PIC32MX570F512L-50I/PT - 50MHz 512KB Flash MCU | Microchip

The Microchip Technology PIC32MX570F512L-50I/PT is a 32-bit MIPS32 M4K microcontroller delivering up to 50 MHz / 83 DMIPS performance with 512 KB Flash and 64 KB SRAM, housed in a 100-pin TQFP (PT) 12x12 mm package. It belongs to the PIC32MX1XX/2XX/5XX 64/100-pin family, integrates a USB 2.0 Full-Speed OTG controller, a CAN 2.0B module, four I2S/SPI modules, two I2C modules, a Parallel Master Port (PMP), and a 10-bit 1 MSPS ADC with up to 48 channels. A 32-bit microcontroller (MCU) is an embedded processor that integrates CPU, memory, and peripherals on a single die. Within the broader taxonomy, the PIC32MX570 sits in the 32-bit MCU category (above 8-bit and 16-bit MCUs), and within that family in the MIPS32 M4K architectural line. Compared with 8-bit PIC16/PIC18 devices, the PIC32MX core delivers roughly 10x the MIPS throughput while retaining Microchip's MPLAB X toolchain compatibility, easing migration for existing PIC firmware developers. The PIC32MX5xx sub-family specifically adds USB-OTG and CAN peripherals that are absent on lower-tier PIC32MX1xx/2xx parts. Key features of the PIC32MX570F512L include Peripheral Pin Select (PPS) for flexible I/O mapping, a Charge Time Measurement Unit (CTMU) for capacitive touch sensing, a 16-bit Parallel Master Port (PMP) with dual read/write buffers for graphics interfaces, two I2S modules for audio codec interfaces, and an on-chip 8 MHz internal oscillator with PLL support up to 50 MHz. The device also includes a JTAG debugger interface, five 16-bit timers/counters, five input capture and five output compare modules, and a real-time clock calendar. Architecturally, the M4K core combines single-cycle hardware multiply and a 5-stage pipeline, enabling deterministic interrupt response at 50 MHz. The 64 KB SRAM supports data buffering for USB isochronous transfers and CAN message handling simultaneously. The 512 KB Flash is organized as 256K x 16 with pre-fetch cache, accelerating instruction fetches at full clock rate. Typical applications include USB audio headsets and USB-to-CAN bridges, industrial HMI panels with graphics LCDs, capacitive touch user interfaces, embedded web servers, and USB HID peripherals. The wide peripheral mix also suits motor control prototyping and medical instrumentation front-ends. When designing with this MCU, allocate adequate decoupling capacitance near each VDD/VSS pair, ensure the 50 MHz PLL reference is within 50 ppm stability, and observe the I/O pin current limits of 15 mA source / sink when driving LEDs or relays directly. The -50I suffix denotes 50 MHz maximum clock and -40 C to +85 C industrial temperature range. This page consolidates distributor pricing, drop-in same-brand alternatives in the same 100-pin TQFP, and practical engineering design notes not found in the manufacturer datasheet alone, helping procurement and design engineers make faster decisions.

USD $5.30 有现货
PIC32MX570F512L-I/PT - 512KB Flash 40MHz 32-bit MCU | Microchip
PIC32MX570F512L-I/PT

PIC32MX570F512L-I/PT - 512KB Flash 40MHz 32-bit MCU | Microchip

The Microchip Technology PIC32MX570F512L-I/PT is a 32-bit MIPS32 M4K microcontroller running at up to 50 MHz/83 DMIPS, integrating 512 KB program Flash and 64 KB SRAM in a 100-pin TQFP (12x12 mm) package. It is specified for the industrial -40C to +85C temperature range and operates from 2.3V to 3.6V with USB 2.0 Full-Speed OTG and CAN 2.0B peripherals on-chip. A microcontroller (MCU) is a single-chip computer that integrates a CPU core, program memory (Flash), working memory (RAM), and programmable I/O peripherals into one device. The PIC32MX570F512L sits within the broader taxonomy: MCU -> 32-bit MCU -> MIPS M4K core MCU -> PIC32MX family -> PIC32MX5xx sub-family (with USB/CAN/audio/graphics peripherals). It belongs to the power-management-aware class of MCUs intended for mixed analog/digital and connected products. The headline feature set includes two I2S and four SPI modules (for audio Codec and display peripherals), Peripheral Pin Select (PPS) for flexible signal routing, and a Parallel Master Port (PMP) with dual buffers for graphics interfaces. The device also integrates a Charge Time Measurement Unit (CTMU), a 10-bit 1 MsA, and USB 2.0 Full-Speed OTG plus a CAN 2.0B module with DeviceNet addressing support. These are packaged in a 100-pin TQFP with 81 user I/O capable of driving mixed analog and digital loads. Architecturally, the MIPS M4K core features a 5-stage pipeline with hardware multiply/divide and a shadow register set for fast interrupt response. The 512 KB Flash is single-cycle accessible with a 128-bit-wide prefetch bus, paired with a dedicated DMA controller for peripheral-to-memory transfers without CPU intervention. The 64 KB SRAM supports live update via the dual-panel Flash architecture, enabling bootloader-style firmware upgrades in the field. Typical applications include USB-connected human-interface devices, CAN-bus industrial nodes (e.g., DeviceNet gateways), audio playback products using I2S Codecs, low-cost graphical HMI panels using PMP, and connected sensor hubs that need both USB and CAN. The 100-pin TQFP and Microchip's MPLAB X tool chain allow low-HART development using the XC32 compiler and Microchip's Harmony framework. The PIC32MX570F512L is pin-compatible with the 100-pin PIC32MX1xx/2xx/5xx family, enabling PCB reuse across Flash/RAM tiers. A key design consideration is that the PIC32MX family uses a non-5V-tolerant I/O architecture on most pins (3.6V VIH max on many pins), so level shifting is required when interfacing with 5V legacy logic. The integrated 8 MHz internal RC can be used for USB start-up, simplifying BOM. This page synthesizes distributor pricing, parametric equivalents, and practical design notes not found in the manufacturer datasheet alone.

USD $4.82 有现货
PIC32MX570F512L-V/PF - 32-Bit MCU 512KB Flash 64KB RAM 100-TQFP | Microchip
PIC32MX570F512L-V/PF

PIC32MX570F512L-V/PF - 32-Bit MCU 512KB Flash 64KB RAM 100-TQFP | Microchip

The Microchip PIC32MX570F512L-V/PF is a 32-bit MIPS M4K microcontroller with 512 KB Flash and 64 KB SRAM, offered in a 100-pin TQFP package with operating speed up to 50 MHz (83 DMIPS). It integrates USB 2.0 Full-Speed OTG, CAN 2.0B with DeviceNet addressing, four I2S/SPI modules, Peripheral Pin Select (PPS), and a Parallel Master Port (PMP) with dual read/write buffers for graphics interfaces. A microcontroller (MCU) is a single-chip computer that integrates a CPU core, program memory (Flash), working memory (RAM), and programmable peripherals into one package. The PIC32 family sits in the 32-bit MCU category alongside ARM Cortex-M parts; within that hierarchy it falls under MIPS32 architecture and is positioned as a high-performance, mixed-signal part for embedded designs that require USB, CAN, and rich connectivity. Key features include up to 50 MHz core operation delivering 83 DMIPS, 512 KB Flash with 64 KB RAM, USB 2.0 Full-Speed On-The-Go, and CAN 2.0B with DeviceNet-ready addressing. The device also offers 16-bit Parallel Master Port (PMP) for external graphics memory, Peripheral Pin Select for flexible peripheral routing, two I2S and four SPI modules for codec and serial communications, a 10-bit ADC with up to 1 Msps sampling, and an integrated RTCC and CTMU for touch and timing functions. Internally the part uses the MIPS32 M4K core with 5-stage pipeline, hardware multiply/divide, and a tightly coupled prefetch module for deterministic Flash access. PPS remaps digital peripherals to a wide range of physical pins, which simplifies PCB routing and enables late-stage design changes. The 100-pin TQFP package exposes the maximum number of peripherals and analog channels of this sub-family. Typical applications include USB audio interfaces, CAN-based industrial control nodes, HMI panels with graphics LCDs, and embedded control boards that need both USB device/host and CAN connectivity in a single chip. The combination of PMP, I2S, and CTMU also makes the part suitable for touch-screen human-machine interfaces. When designing with this device, ensure the supply rail stays within 2.3 V to 3.6 V and place decoupling close to each VDD/VSS pair; the integrated CTMU and PMP require careful grounding for low-noise touch and graphics performance. This page combines distributor pricing, verified drop-in alternatives, and practical design notes that complement the manufacturer datasheet with concrete cross-vendor comparison data.

USD $5.48 有现货
PIC32MX570F512LT-50I/GJX - 32-bit MCU 512KB Flash 50MHz TFBGA-100 | Microchip
PIC32MX570F512LT-50I/GJX

PIC32MX570F512LT-50I/GJX - 32-bit MCU 512KB Flash 50MHz TFBGA-100 | Microchip

The Microchip Technology PIC32MX570F512LT-50I/GJX is a 32-bit MIPS32 M4K microcontroller running up to 50 MHz with 83 DMIPS core performance, integrating 512 KB of Flash program memory and 64 KB of SRAM in a 100-pin TFBGA (7x7 mm) package. The device is tape-and-reel (LT suffix) and rated for the industrial temperature range of -40C to +85C. A microcontroller (MCU) is a single-chip computer that integrates a CPU core, volatile and non-volatile memory, and a rich set of peripherals such as timers, communication controllers and ADCs. PIC32MX5xx parts sit in Microchip's PIC32 family, which uses a MIPS32 core rather than the ARM Cortex-M cores used by many peers. Within the broader taxonomy, a PIC32 MCU belongs to the class of 32-bit microcontrollers, which in turn falls under the embedded processing hierarchy: microcontroller -> embedded processor -> semiconductor -> integrated circuit. Key features include USB 2.0 full-speed On-The-Go (OTG) with integrated PHY, a CAN 2.0B controller, two I2S and four SPI modules for codec and serial peripherals, a Parallel Master Port (PMP) with dual buffers for graphics interfaces, Peripheral Pin Select (PPS) for flexible pin mapping, an RTCC with calendar mode, a CTMU for capacitive touch, three analog comparators and a 10-bit ADC with up to 16 channels. The 100-pin TFBGA footprint exposes five 16-bit timers/counters, configurable I/O, JTAG and trace ports. Architecturally the M4K core executes most instructions in one cycle and is supported by a 5-stage pipeline with hardware multiply/divide and a tightly-coupled prefetch module that masks Flash wait states. The integrated DMA controller offloads memory-to-peripheral transfers and the bus matrix allows concurrent Flash and RAM access. PPS remaps digital peripherals to almost any I/O pin, dramatically simplifying board routing. Typical applications include USB peripherals, CAN-connected industrial sensors, audio codecs with I2S, graphical user interfaces with PMP-driven TFTs, capacitive touch keypads via CTMU, and low-cost IoT bridges. The wide peripheral mix makes it a flexible general-purpose MCU for mid-volume embedded designs. Designers should review the device errata and DS60001129 (PIC32MX5xx/6xx/7xx family data sheet) before committing to the 100-pin TFBGA, which requires a 7x7 mm fan-out and careful microvia stack-up for reliable assembly. This page synthesizes verified distributor pricing, drop-in alternative recommendations and engineering-oriented design notes that go beyond the manufacturer datasheet and standard distributor listings.

USD $5.47 有现货
PIC32MX570F512LT-50I/PF - 50MHz 512KB Flash MCU | Microchip
PIC32MX570F512LT-50I/PF

PIC32MX570F512LT-50I/PF - 50MHz 512KB Flash MCU | Microchip

The Microchip Technology PIC32MX570F512LT-50I/PF is a 32-bit MIPS microcontroller from the PIC32MX5 family featuring a MIPS32 M4K core running up to 50 MHz (83 DMIPS) with 512 KB of Flash and 64 KB of SRAM in a 100-pin TQFP (14x14 mm) package. It integrates two I2S and four SPI modules for codec and serial communications, Peripheral Pin Select (PPS) for flexible pin mapping, and a Parallel Master Port (PMP) with dual read/write buffers for graphics interfaces. A microcontroller (MCU) is a single-chip computer containing a processor core, program memory (Flash), data memory (SRAM), and a rich set of peripherals. The 32-bit class of MCUs extends 8/16-bit devices with higher computational throughput (measured in DMIPS), larger memory addressing, and richer connectivity. Within that class, the PIC32MX5 series targets applications that need multimedia interfaces (I2S for digital audio, PMP for TFT displays) alongside traditional MCU I/O, bridging cost-sensitive industrial and consumer designs. Key features include 50 MHz / 83 DMIPS MIPS32 M4K core performance, 512 KB Flash (512K x 8), 64 KB SRAM, two I2S modules for audio codecs, four SPI modules for high-speed serial peripherals, Peripheral Pin Select (PPS) for remappable digital I/O, a Parallel Master Port (PMP) with dual buffers, and an on-chip 16-bit ADC with CTMU for touch and capacitive sensing. The 'L' suffix denotes the 100-pin variant, 'T' denotes tape and reel, '50' denotes the 50 MHz speed grade, 'I' is the industrial -40C to +85C temperature range, and 'PF' is the 100-pin TQFP package. Typical applications include digital audio playback/recording devices using external I2S codecs, low-cost graphical HMI panels with PMP-driven TFT LCDs, industrial control and sensor nodes with CTMU touch sensing, USB device/host/embedded designs using the PIC32 USB stack, and general purpose embedded control with rich peripheral connectivity. The wide operating voltage range (2.3V to 3.6V) and industrial temperature grade support factory automation and outdoor equipment. When designing with this MCU, verify the power budget: VDD core current scales with clock and peripheral activity, so an LDO or switching regulator sized for the worst-case active mode is essential. Use MPLAB X IDE with the XC32 compiler for firmware development, and consult the device-specific data sheet for pin, peripheral, and electrical characteristics. This page synthesizes distributor pricing, same-family and cross-brand drop-in alternatives, and practical design notes that go beyond the manufacturer datasheet.

USD $4.61 有现货
PIC32MX570F512LT-50I/PT - 50MHz 512KB Flash MCU | Microchip
PIC32MX570F512LT-50I/PT

PIC32MX570F512LT-50I/PT - 50MHz 512KB Flash MCU | Microchip

The Microchip Technology PIC32MX570F512LT-50I/PT is a 32-bit MIPS MCU delivering up to 50 MHz / 83 DMIPS from the MIPS32 M4K core, with 512 KB Flash and 64 KB SRAM, housed in a 100-pin TQFP (12x12 mm) package. It supports 2.5V/3.3V operation and is qualified for the industrial -40C to +85C temperature range. The 'T' suffix denotes tape-and-reel packaging and the '50I' indicates 50 MHz speed grade with industrial temperature. A 32-bit microcontroller (MCU) is a single-chip computer that integrates a CPU core, Flash program memory, SRAM data memory, and a rich set of peripherals (ADC, timers, communication interfaces). The PIC32MX family uses the MIPS32 M4K core, positioning these parts in the hierarchy: MIPS32 core -> 32-bit MCU -> microcontroller -> embedded controller -> semiconductor. This taxonomy matters because software stacks, compiler toolchains (MPLAB XC32), and middleware are tied to the core architecture. Key features include two I2S and four SPI modules for audio codec and serial communications, Peripheral Pin Select (PPS) for flexible I/O mapping, a Parallel Master Port (PMP) with dual buffers for graphics interfaces, and a CTMU (Charge Time Measurement Unit) for capacitive touch and time-of-flight measurements. USB 2.0 full-speed OTG and CAN 2.0b are integrated, eliminating external transceivers for many designs. Architecturally, the PIC32MX570F512L family combines a Harvard-cache architecture with 5-stage pipeline, achieving 1.53 DMIPS/MHz efficiency. The device includes a 10-bit 1 Msps ADC with up to 28 channels, five 16-bit timers/counters, and DMA for low-CPU-overhead peripheral transfers. JTAG and 2-wire debug interfaces support MPLAB ICD tools for in-circuit programming and debugging. Typical applications include industrial control and HMI panels using PMP graphics, USB peripherals such as audio interfaces and human-interface devices, CAN-connected automotive and building-automation nodes, audio processing with I2S codecs, and capacitive touch user interfaces using the CTMU. Designers choose this part when they need a balance of USB/CAN connectivity, ample Flash for GUI stacks, and proven MPLAB ecosystem support. When designing, plan the I/O map carefully using PPS to remap peripheral functions to physical pins, and reserve an external 8 MHz crystal plus PLL configuration to reach 50 MHz. Use the Explorer 16/32 development board PIM for early prototyping - the 100-pin PIM form factor accelerates bring-up. This page synthesizes distributor pricing (as of 2026-10-03), drop-in alternatives from the same PIC32MX family, and practical design notes not consolidated in the manufacturer datasheet alone.

USD $6.10 有现货