集成电路

子分类

📁 ADC/DAC 3,100+ 产品 📁 放大器IC 1,800+ 产品 📁 音频编解码器 18 产品 📁 音频IC 2 产品 📁 时钟与计时 650+ 产品 📁 Comparator ICs 1 产品 📁 DSP 1,100+ 产品 📁 数据采集IC 2 产品 📁 数字电位器 4 产品 📁 显示驱动与控制器 1 产品 📁 FPGA与CPLD 7,100+ 产品 📁 接口IC 3,100+ 产品 📁 LED驱动器 1 产品 📁 逻辑IC 450+ 产品 📁 存储IC 870+ 产品 📁 微控制器 20,000+ 产品 📁 微处理器 4 产品 📁 电机驱动器 1 产品 📁 其他 1 产品 📁 Sensor and Detector Interfaces 1 产品 📁 专用IC 15 产品 📁 视频IC 14 产品

产品（38,000+)

C8051F041 - 25MHz Mixed-Signal 8051 MCU with 64KB Flash
C8051F041

C8051F041 - 25MHz Mixed-Signal 8051 MCU with 64KB Flash

Silicon Labs C8051F041 is an integrated mixed-signal 8-bit microcontroller with a 25MHz CIP-51-compatible 8051 core, 64KB of flash memory, a 12-bit 100ksps ADC, three comparators, and CAN 2.0B support in a 64-pin TQFP package. The device combines a 25 MIPS processing capability, 4.25KB of on-chip RAM, programmable analog conversion, and industrial communication features in one surface-mount device. An 8-bit microcontroller is a programmable semiconductor that integrates a CPU, nonvolatile program memory, data memory, and peripherals on one die. The C8051F041 belongs to the 8051 family, which combines a mature instruction set with mixed-signal peripherals for embedded control. Its position in the hierarchy is microcontroller → 8-bit MCU → mixed-signal MCU → embedded control platform. Key features include a 25MHz operating frequency and advertised performance of 25 MIPS, 64KB of in-system programmable flash, and 4.25KB of on-chip RAM. Its analog subsystem includes a 12-bit successive-approximation ADC with 13 input channels, programmable throughput up to 100ksps, and three comparators. CAN 2.0B support allows the MCU to participate in embedded CAN networks. The C8051F041 uses the Silicon Labs C8051F04x architecture, combining an enhanced 8051-compatible core with separate high-speed analog subsystems. The verified distributor description identifies both 10-bit and 12-bit conversion options across the family and notes a 100ksps ADC operating mode. This makes the device useful where digital control, local analog measurement, and deterministic communication must coexist in a compact embedded design. Typical applications include industrial sensor-control equipment, building automation nodes, CAN-connected instrumentation, motor or process-control modules, and compact consumer appliances. The 12-bit ADC is appropriate for monitoring external analog transducers, while the comparators can support threshold detection, fault signaling, or simple control functions without occupying a separate analog IC. The primary design consideration is power-domain integration. The verified source identifies a 2.7V to 3.6V supply range, so the MCU and its analog peripherals must be operated from a compatible 3.3V rail. Board design must also preserve clean analog return paths, provide suitable bypassing, and isolate communications and switching nodes from sensitive ADC inputs. This page consolidates verified distributor specifications, package information, pricing context, cross-reference findings, and practical design guidance. It also distinguishes documented drop-in replacements from unverified alternatives, helping engineers avoid assuming that a similar MCU is pin-compatible without checking its complete electrical and pin definitions.

询价 联系我们
C8051F041R - 25MHz Mixed-Signal 8051 MCU with 64KB Flash (Tape & Reel)
C8051F041R

C8051F041R - 25MHz Mixed-Signal 8051 MCU with 64KB Flash (Tape & Reel)

Silicon Labs C8051F041R is an integrated mixed-signal 8-bit microcontroller with a 25MHz CIP-51-compatible 8051 core, 64KB of flash memory, a 12-bit 100ksps ADC, three comparators, and CAN 2.0B support in a 64-pin TQFP package. The device combines a 25 MIPS processing capability, 4.25KB of on-chip RAM, programmable analog conversion, and industrial communication features in one surface-mount device. An 8-bit microcontroller is a programmable semiconductor that integrates a CPU, nonvolatile program memory, data memory, and peripherals on one die. The C8051F041R belongs to the 8051 family, which combines a mature instruction set with mixed-signal peripherals for embedded control. Its position in the hierarchy is microcontroller → 8-bit MCU → mixed-signal MCU → embedded control platform. Key features include a 25MHz operating frequency and advertised performance of 25 MIPS, 64KB of in-system programmable flash, and 4.25KB of on-chip RAM. Its analog subsystem includes a 12-bit successive-approximation ADC with 13 input channels, programmable throughput up to 100ksps, and three comparators. CAN 2.0B support allows the MCU to participate in embedded CAN networks. The C8051F041R uses the Silicon Labs C8051F04x architecture, combining an enhanced 8051-compatible core with separate high-speed analog subsystems. The verified distributor description identifies both 10-bit and 12-bit conversion options across the family and notes a 100ksps ADC operating mode. This makes the device useful where digital control, local analog measurement, and deterministic communication must coexist in a compact embedded design. Typical applications include industrial sensor-control equipment, building automation nodes, CAN-connected instrumentation, motor or process-control modules, and compact consumer appliances. The 12-bit ADC is appropriate for monitoring external analog transducers, while the comparators can support threshold detection, fault signaling, or simple control functions without occupying a separate analog IC. The primary design consideration is power-domain integration. The verified source identifies a 2.7V to 3.6V supply range, so the MCU and its analog peripherals must be operated from a compatible 3.3V rail. Board design must also preserve clean analog return paths, provide suitable bypassing, and isolate communications and switching nodes from sensitive ADC inputs. This page consolidates verified distributor specifications, package information, pricing context, cross-reference findings, and practical design guidance. It also distinguishes documented drop-in replacements from unverified alternatives, helping engineers avoid assuming that a similar MCU is pin-compatible without checking its complete electrical and pin definitions.

询价 联系我们
C8051F042 - 25MHz 64KB Flash Mixed-Signal MCU | Silicon Labs
C8051F042

C8051F042 - 25MHz 64KB Flash Mixed-Signal MCU | Silicon Labs

The Silicon Labs C8051F042 is a mixed-signal 8-bit microcontroller built around the 8051 core and operating at up to 25 MHz. It integrates 64 KB of Flash program memory, a 10-bit SAR ADC with 13 channels and throughput up to 100 ksps, three comparators, and CAN 2.0B communication in a 100-TQFP package. The device is positioned for industrial, embedded control, measurement, and communication designs that need more analog capability than a basic general-purpose microcontroller. The C8051F042 belongs to the C8051F04x family of highly integrated mixed-signal System-on-a-Chip MCUs. Within the semiconductor hierarchy, it is a microcontroller, a mixed-signal MCU, an embedded processor, and a semiconductor. Its 8051-compatible core combines deterministic embedded control with integrated data acquisition, making it suitable for sensor interfaces, motor and power control, industrial monitoring, and CAN-connected equipment. Key features include 25 MHz performance, 64 KB of Flash memory, a 10-bit SAR ADC, three comparators, and an integrated CAN 2.0B controller. The ADC can operate with single-ended or differential inputs and supports programmable throughput up to 100 ksps according to the manufacturer data-sheet information. These resources allow one device to acquire analog signals, execute control logic, and communicate with other embedded systems without requiring several separate analog and communication components. The C8051F042 also supports in-system programming and mixed-signal integration typical of the C8051F04x family. The 100-TQFP package provides 64 digital I/O pins according to the family overview, while the device-specific datasheet remains the authority for exact pin assignments, electrical limits, memory organization, and peripheral multiplexing. The 25 MHz operating point supports faster control-loop execution and signal sampling than lower-speed members of the same family, subject to the specified clock and power-supply requirements. Typical applications include industrial data-acquisition systems, CAN bus equipment, sensor interfaces, motor-control subsystems, embedded instrumentation, and communications modules. In a measurement system, the internal ADC and comparators can reduce the number of external signal-conditioning components, while the CAN controller supports networked industrial equipment. In a control system, the 8051 core can execute supervisory logic while the analog peripherals monitor thresholds and process sensor inputs. Designers should preserve the exact C8051F042 pinout and peripheral assignments when laying out a PCB, and should use the manufacturer data sheet for decoupling, clock, analog-reference, and mixed-signal grounding recommendations. Because the provided verified sources describe the part but do not provide a complete pin table, package drawing, current consumption values, or a verified distributor price list, those details remain marked for verification rather than being inferred. This page consolidates the verified C8051F042 specifications, distributor references, family alternatives, application guidance, and engineering-oriented design notes. The information is intended to support component identification, initial architecture selection, and sourcing comparisons while separating confirmed data from parameters that require direct review of the manufacturer documentation.

询价 联系我们
C8051F042R - 25MHz 64KB Flash Mixed-Signal MCU | Silicon Labs (Tape & Reel)
C8051F042R

C8051F042R - 25MHz 64KB Flash Mixed-Signal MCU | Silicon Labs (Tape & Reel)

The Silicon Labs C8051F042R is a mixed-signal 8-bit microcontroller built around the 8051 core and operating at up to 25 MHz. It integrates 64 KB of Flash program memory, a 10-bit SAR ADC with 13 channels and throughput up to 100 ksps, three comparators, and CAN 2.0B communication in a 100-TQFP package. The device is positioned for industrial, embedded control, measurement, and communication designs that need more analog capability than a basic general-purpose microcontroller. The C8051F042R belongs to the C8051F04x family of highly integrated mixed-signal System-on-a-Chip MCUs. Within the semiconductor hierarchy, it is a microcontroller, a mixed-signal MCU, an embedded processor, and a semiconductor. Its 8051-compatible core combines deterministic embedded control with integrated data acquisition, making it suitable for sensor interfaces, motor and power control, industrial monitoring, and CAN-connected equipment. Key features include 25 MHz performance, 64 KB of Flash memory, a 10-bit SAR ADC, three comparators, and an integrated CAN 2.0B controller. The ADC can operate with single-ended or differential inputs and supports programmable throughput up to 100 ksps according to the manufacturer data-sheet information. These resources allow one device to acquire analog signals, execute control logic, and communicate with other embedded systems without requiring several separate analog and communication components. The C8051F042R also supports in-system programming and mixed-signal integration typical of the C8051F04x family. The 100-TQFP package provides 64 digital I/O pins according to the family overview, while the device-specific datasheet remains the authority for exact pin assignments, electrical limits, memory organization, and peripheral multiplexing. The 25 MHz operating point supports faster control-loop execution and signal sampling than lower-speed members of the same family, subject to the specified clock and power-supply requirements. Typical applications include industrial data-acquisition systems, CAN bus equipment, sensor interfaces, motor-control subsystems, embedded instrumentation, and communications modules. In a measurement system, the internal ADC and comparators can reduce the number of external signal-conditioning components, while the CAN controller supports networked industrial equipment. In a control system, the 8051 core can execute supervisory logic while the analog peripherals monitor thresholds and process sensor inputs. Designers should preserve the exact C8051F042R pinout and peripheral assignments when laying out a PCB, and should use the manufacturer data sheet for decoupling, clock, analog-reference, and mixed-signal grounding recommendations. Because the provided verified sources describe the part but do not provide a complete pin table, package drawing, current consumption values, or a verified distributor price list, those details remain marked for verification rather than being inferred. This page consolidates the verified C8051F042R specifications, distributor references, family alternatives, application guidance, and engineering-oriented design notes. The information is intended to support component identification, initial architecture selection, and sourcing comparisons while separating confirmed data from parameters that require direct review of the manufacturer documentation.

询价 联系我们
C8051F043 - 8-Bit 25MHz 64KB Flash MCU with CAN | Silicon Labs
C8051F043

C8051F043 - 8-Bit 25MHz 64KB Flash MCU with CAN | Silicon Labs

Silicon Labs C8051F043 is a highly integrated mixed-signal 8-bit microcontroller with a 25 MHz 8051 core, 64 KB of program Flash, and integrated CAN 2.0B support. The device is identified in distributor listings as an 8051 C8051F04x MCU in a 64-pin TQFP package measuring 10 mm by 10 mm. Its analog features include a 10-bit, 13-channel ADC operating at up to 100 ksps and three comparators, making it suitable for embedded control systems that need digital processing alongside analog measurement. A microcontroller is a programmable semiconductor that integrates a CPU core, memory, peripherals, and input/output functions on one package. The C8051F043 belongs to the mixed-signal MCU category and combines an 8-bit 8051 processor with flash memory, analog conversion, comparison, and communications peripherals. This integration reduces the number of external components required in industrial instrumentation, embedded measurement, and CAN-connected control equipment. The key headline specifications are a 25 MHz operating frequency, 64 KB of Flash program memory, and a 10-bit ADC with 13 channels and 100 ksps conversion capability. The integrated CAN 2.0B controller is an important differentiator for applications requiring reliable communication between embedded nodes. The family description also identifies 32 digital I/O pins for the C8051F043 variant, while the larger C8051F040, F042, F044, and F046 members provide 64 digital I/O pins. Silicon Labs describes the C8051F04x devices as fully integrated mixed-signal system-on-chip MCUs with in-system programming capability and a broad set of analog and digital peripherals. The C8051F043 is appropriate when a design needs CAN connectivity, deterministic 8-bit processing, local analog sensing, and a compact surface-mount implementation without moving to a higher-cost 32-bit MCU. Typical uses include industrial sensor controllers, CAN bus nodes, motor and process-control equipment, instrumentation front ends, and embedded data-acquisition systems. The 10-bit ADC supports sensor monitoring and control loops, while the three comparators can assist with threshold detection and signal conditioning. The 64 KB Flash capacity provides room for application firmware and configuration logic. Designers should confirm the exact device pinout, electrical limits, oscillator requirements, programming interface, and ADC input conditioning against the manufacturer datasheet before layout. This page synthesizes verified distributor information, available cross-reference findings, and practical application guidance; unavailable pricing, pin-level details, and full electrical limits are explicitly marked rather than estimated.

询价 联系我们
C8051F043R - 8-Bit 25MHz 64KB Flash MCU with CAN | Silicon Labs (Tape & Reel)
C8051F043R

C8051F043R - 8-Bit 25MHz 64KB Flash MCU with CAN | Silicon Labs (Tape & Reel)

Silicon Labs C8051F043R is a highly integrated mixed-signal 8-bit microcontroller with a 25 MHz 8051 core, 64 KB of program Flash, and integrated CAN 2.0B support. The device is identified in distributor listings as an 8051 C8051F04x MCU in a 64-pin TQFP package measuring 10 mm by 10 mm. Its analog features include a 10-bit, 13-channel ADC operating at up to 100 ksps and three comparators, making it suitable for embedded control systems that need digital processing alongside analog measurement. A microcontroller is a programmable semiconductor that integrates a CPU core, memory, peripherals, and input/output functions on one package. The C8051F043R belongs to the mixed-signal MCU category and combines an 8-bit 8051 processor with flash memory, analog conversion, comparison, and communications peripherals. This integration reduces the number of external components required in industrial instrumentation, embedded measurement, and CAN-connected control equipment. The key headline specifications are a 25 MHz operating frequency, 64 KB of Flash program memory, and a 10-bit ADC with 13 channels and 100 ksps conversion capability. The integrated CAN 2.0B controller is an important differentiator for applications requiring reliable communication between embedded nodes. The family description also identifies 32 digital I/O pins for the C8051F043R variant, while the larger C8051F040, F042, F044, and F046 members provide 64 digital I/O pins. Silicon Labs describes the C8051F04x devices as fully integrated mixed-signal system-on-chip MCUs with in-system programming capability and a broad set of analog and digital peripherals. The C8051F043R is appropriate when a design needs CAN connectivity, deterministic 8-bit processing, local analog sensing, and a compact surface-mount implementation without moving to a higher-cost 32-bit MCU. Typical uses include industrial sensor controllers, CAN bus nodes, motor and process-control equipment, instrumentation front ends, and embedded data-acquisition systems. The 10-bit ADC supports sensor monitoring and control loops, while the three comparators can assist with threshold detection and signal conditioning. The 64 KB Flash capacity provides room for application firmware and configuration logic. Designers should confirm the exact device pinout, electrical limits, oscillator requirements, programming interface, and ADC input conditioning against the manufacturer datasheet before layout. This page synthesizes verified distributor information, available cross-reference findings, and practical application guidance; unavailable pricing, pin-level details, and full electrical limits are explicitly marked rather than estimated.

询价 联系我们
C8051F044 - 25MHz 8-Bit MCU with 64KB Flash | Silicon Labs
C8051F044

C8051F044 - 25MHz 8-Bit MCU with 64KB Flash | Silicon Labs

The Silicon Labs C8051F044 is a mixed-signal 8-bit microcontroller with a 25 MHz 8051 core, 64 kB of flash memory, a 10-bit 13-channel 100 ksps ADC, three comparators, five 16-bit timers, and integrated CAN in a 100-pin QFP package measuring 14 x 14 mm. Its combination of digital control and analog measurement makes it suitable for industrial monitoring, data acquisition, communications, and embedded control systems. An 8-bit microcontroller is a compact embedded-processing device that executes firmware from program memory and interacts with external hardware through digital and analog peripherals. The C8051F044 belongs to the mixed-signal MCU category, combining the 8051 instruction-set architecture with on-chip analog-to-digital conversion, comparator functions, timers, and communication interfaces. This integration allows a board to measure and control physical variables without requiring separate external converter ICs in many designs. The device operates at 25 MHz and provides 64 kB, or 64K x 8 bits, of flash memory. Its on-chip RAM is 4.25 kB, while five 16-bit timers support periodic generation, timing, and event measurement. The integrated 10-bit ADC supports 13 channels at 100 ksps, and three comparators provide fast threshold detection for signals such as temperature, voltage, or industrial sensor outputs. Communication and timing resources extend beyond the basic ADC and comparator functions. The C8051F044 includes integrated CAN and additional communication interfaces for connected industrial equipment. Its 100-pin QFP package exposes the mixed-signal resources and supports a conventional leaded or gull-wing footprint rather than a fine-pitch BGA arrangement, making assembly and prototype inspection comparatively accessible. Typical uses include sensor acquisition and supervisory control, industrial communication nodes, motor or process monitoring, and embedded systems that require both analog measurements and deterministic control. The 13-channel ADC is useful for multichannel process inputs, while the comparators can generate fast threshold events without continuously sampling the analog domain. A critical design consideration is the 14 x 14 mm, 100-pin footprint and the allocation of analog, digital, power, and communication pins. Designers should use the manufacturer package drawing and pinout documentation to confirm every net, preserve analog routing discipline, and provide suitable bypassing close to the supply pins. This page consolidates the verified manufacturer and distributor information for the C8051F044, separates confirmed specifications from unavailable data, and provides practical application guidance and same-family drop-in candidates without presenting unsupported pricing or pin details as verified facts.

询价 联系我们
C8051F045 - 25MHz 8-Bit MCU, 64KB Flash, 64-TQFP | Silicon Labs
C8051F045

C8051F045 - 25MHz 8-Bit MCU, 64KB Flash, 64-TQFP | Silicon Labs

Silicon Labs C8051F045 is an 8-bit C8051F04x-series microcontroller operating at 25 MHz, with 64 KB of programmable flash memory, 4.25 KB of RAM, CAN connectivity, and a 64-pin TQFP package measuring 10 x 10 mm. The device operates from a 2.7 V to 3.6 V supply, making it suitable for low-voltage embedded control systems requiring CAN communication, moderate onboard code storage, and a conventional 8051-compatible architecture. A microcontroller is a programmable integrated circuit containing a processor core, memory, peripherals, and interface logic on one semiconductor device. The C8051F045 belongs to the C8051F04x family of 8-bit microcontrollers, combining an 8051-compatible core with embedded flash, RAM, digital I/O, communication peripherals, and other mixed-signal resources. Within the product hierarchy, it is a microcontroller, embedded controller, and semiconductor intended for compact standalone control and communication tasks. The verified product information identifies a 25 MHz maximum operating frequency, 64 KB flash program memory, 4.25 KB RAM, and 2.7 V to 3.6 V supply range. Its 64-pin TQFP package provides substantially more connection options than smaller microcontroller packages and is appropriate for designs requiring external memory interfaces, communications, analog inputs, timers, or a larger number of general-purpose I/O pins. The listed C8051F045-GQ ordering option is identified as a RoHS-compliant, lead-free 64-TQFP variant. The C8051F045 architecture is positioned for embedded control rather than high-performance computing. Its 25 MHz clock provides deterministic operation for motor, machine, interface, and communications tasks, while the 64 KB flash region supports a larger embedded program than small-memory 8051 devices. The verified listing identifies CAN capability in the C8051F04x family, allowing the controller to participate in industrial and automotive networking designs when the remaining peripheral, transceiver, and timing requirements are satisfied. Typical applications include CAN-connected industrial controllers, automated test equipment, building-control modules, embedded data-acquisition units, instrumentation, and communication gateways. In a CAN node, the microcontroller executes application logic, handles digital inputs, controls outputs, and communicates through a separate CAN transceiver. The 64-TQFP package also makes the device practical for designs that need more peripheral access than a small 20- or 32-pin MCU can provide. Designers should verify the complete pin assignment and peripheral availability against the manufacturer datasheet before layout because the supplied search results establish the package size and pin count but do not provide a complete numbered pin table. The 3.3 V supply range also requires careful regulator selection, while CAN implementation depends on correct transceiver selection, bus termination, isolation requirements, and software timing. This page consolidates the verified distributor specifications, package information, availability observations, and engineering-oriented application guidance into one practical reference. It also separates directly verified facts from unavailable details so engineers can identify what still requires confirmation in the complete C8051F04x technical documentation.

询价 联系我们
C8051F046 - 25MHz 8-Bit MCU with 32KB Flash | Silicon Labs
C8051F046

C8051F046 - 25MHz 8-Bit MCU with 32KB Flash | Silicon Labs

Silicon Labs C8051F046 is an 8-bit C8051F04x-series microcontroller operating at up to 25 MHz, with 32 KB of flash program memory, a 100-lead TQFP package, a 10-bit ADC, and CAN connectivity. The device is supplied in a 100-pin 14 x 14 mm TQFP package and is associated with the 8K ISP Flash MCU family. A microcontroller is a programmable semiconductor that integrates a CPU core, memory, peripheral interfaces, and I/O into one device. The C8051F046 belongs to the C8051 8-bit microprocessor family, where the 8051-compatible instruction set provides a compact platform for embedded control. Its mixed-signal and communications features make it suitable for industrial controllers, CAN-connected equipment, data acquisition systems, and legacy embedded designs. The C8051F046's headline specifications are its 25 MHz operating frequency, 32 KB flash memory, and 10-bit ADC. The supplied distributor information also identifies CAN capability, while the package listing specifies 100-TQFP (14 x 14 mm). These features support designs that require programmable logic, analog measurement, and network communication in one device. The C8051F04x designation identifies the family rather than implying that every family member has identical peripheral resources. The supplied search results describe the processor as a 25 MIPS device and identify the C8051F046 as an 8-bit, legacy-speed processor compatible with ASM51 instructions. This architecture is useful for control-oriented embedded products where a deterministic, compact instruction set and established 8051 software ecosystem are more important than a high-performance 32-bit or 64-bit core. Typical applications include industrial data logging, CAN-node controllers, motor and process-control equipment, instrumentation, and embedded systems connected to legacy 8051 peripherals. The ADC provides a direct path for analog sensor inputs, while CAN allows the controller to exchange data with other embedded nodes. Firmware selection must nevertheless confirm the exact peripheral map, pin assignments, and electrical limits for the chosen ordering code. Designers should use the official device documentation for the complete 100-pin pinout, power sequencing, clock configuration, and decoupling requirements. Because the supplied data does not expose individual pin functions, the C8051F046 pinout is marked unavailable rather than reconstructed from assumptions. This page distinguishes the base device from orderable package suffixes such as -GQ and -GQR and focuses on verified distributor and manufacturer-document information.

询价 联系我们
C8051F047 - 8-Bit 25MHz Mixed-Signal MCU | Silicon Labs
C8051F047

C8051F047 - 8-Bit 25MHz Mixed-Signal MCU | Silicon Labs

The Silicon Labs C8051F047 is an 8-bit mixed-signal microcontroller with a 25 MHz 8051-compatible core, 32 KB of in-system programmable flash memory, 32 digital I/O pins, and integrated CAN 2.0B support. The device is identified in distributor listings as a 64-TQFP (10 x 10 mm) package, providing a compact surface-mount solution for embedded control, industrial communication, and mixed-signal sensing systems. A microcontroller is a programmable system-on-chip that combines a CPU core, memory, peripheral interfaces, and digital or analog I/O. The C8051F04x family belongs to the broader 8-bit microcontroller and embedded-controller hierarchy. The C8051F047 is particularly suited to designs requiring legacy 8051 software compatibility alongside higher-performance mixed-signal peripherals and serial communication capability. Key verified features include a 25 MHz maximum operating frequency, 32 KB (32K x 8) of flash memory, 32 digital I/O pins, a 10-bit 13-channel ADC operating at up to 100 ksps, and three comparators. A separate verified listing describes a 10-bit ADC with 13 channels and 100 ksps performance, while the family documentation identifies an integrated CAN 2.0B controller for communications-oriented designs. The C8051F047 uses the Silicon Labs CIP-51 8051-compatible core, as described in the available comparison material. Its mixed-signal feature set allows one device to perform digital control while also acquiring analog measurements and comparing sensor or signal thresholds. The 10-bit ADC and three comparators can reduce the need for separate analog front-end ICs in suitable designs. Typical applications include industrial automation and factory control, CAN-connected equipment, data acquisition, environmental monitoring, embedded instrumentation, and motor or process-control systems. The 64-TQFP package is appropriate for compact boards requiring a high pin count and stable manufacturing, although actual layout must follow the manufacturer pinout and recommended decoupling guidance. Designers should verify the exact C8051F047 package variant, pin assignment, electrical limits, clock configuration, ADC reference, and CAN implementation in the manufacturer datasheet before layout release. Because the available verified data does not provide complete pricing, pin-level details, or full electrical tables, this page distinguishes documented facts from parameters requiring confirmation. This page combines verified distributor identifiers, family-level mixed-signal capabilities, pricing context, drop-in candidates, and application guidance into a concise engineering reference for engineers evaluating the C8051F047 in embedded control designs.

询价 联系我们
C8051F060 - 25MHz Mixed-Signal 8051 MCU | Silicon Labs
C8051F060

C8051F060 - 25MHz Mixed-Signal 8051 MCU | Silicon Labs

The Silicon Labs C8051F060 is a mixed-signal 8-bit microcontroller with a 25 MHz CIP-51 core, 64 KB of in-system programmable flash, 59 digital I/O pins, two 16-bit 1 Msps ADCs, a 12-bit two-channel DAC, three comparators, and CAN 2.0B connectivity in a 100-pin TQFP package. It combines an 8051-compatible core with extensive analog, communications, timer, and industrial-control peripherals. A mixed-signal microcontroller is a semiconductor that integrates digital processing and analog functions on one device. The C8051F060 belongs to the microcontroller hierarchy, where its CIP-51 core executes firmware while the integrated converters and comparators measure or generate analog signals. This consolidation can reduce board area, external component count, and system complexity in industrial control, instrumentation, communications, and embedded data-acquisition equipment. The device operates at 25 MHz and provides 64 KB of flash plus 4352 bytes of on-chip RAM. Its 59 general-purpose digital I/O lines support multiple ports, while its mixed-signal resources include two 16-bit high-speed SAR ADCs, an eight-channel 10-bit ADC, and a two-channel 12-bit DAC. Three analog comparators support thresholding, waveform generation, and basic autonomous control functions. Communications resources include two UARTs, SPI, hardware SMBus compatible with I2C, and CAN 2.0B. According to the Silicon Labs C8051F06x manufacturer datasheet, the peripheral set also includes a programmable 16-bit counter/timer array with six capture/compare modules, five general-purpose 16-bit timers, and a dedicated watchdog timer. An internal calibrated precision oscillator is specified at 24.5 MHz. Typical applications include industrial process control, CAN-connected equipment, data-acquisition systems, analog control panels, test and measurement products, and embedded controllers requiring both serial communications and analog conversion. The integration of ADC, DAC, comparators, timers, and multiple serial interfaces allows a compact design without requiring separate analog or communication ICs. Designers should verify the exact package suffix and pin mapping against the manufacturer datasheet, because C8051F060 is ordered in package-specific forms such as C8051F060-GQ. PCB layout should separate sensitive analog inputs from high-speed digital signals, provide appropriate analog grounding and bypass capacitance, and account for the thermal and decoupling requirements of the complete mixed-signal system. This page consolidates verified manufacturer and distributor information, package details, pricing references, same-family drop-in options, and practical selection guidance. It is intended to help engineers identify the correct 100-pin variant, compare MCU resources, and evaluate whether the C8051F060 provides sufficient analog, communications, and digital I/O capability for a new embedded design.

询价 联系我们
C8051F060R - 25MHz Mixed-Signal 8051 MCU | Silicon Labs (Tape & Reel)
C8051F060R

C8051F060R - 25MHz Mixed-Signal 8051 MCU | Silicon Labs (Tape & Reel)

The Silicon Labs C8051F060R is a mixed-signal 8-bit microcontroller with a 25 MHz CIP-51 core, 64 KB of in-system programmable flash, 59 digital I/O pins, two 16-bit 1 Msps ADCs, a 12-bit two-channel DAC, three comparators, and CAN 2.0B connectivity in a 100-pin TQFP package. It combines an 8051-compatible core with extensive analog, communications, timer, and industrial-control peripherals. A mixed-signal microcontroller is a semiconductor that integrates digital processing and analog functions on one device. The C8051F060R belongs to the microcontroller hierarchy, where its CIP-51 core executes firmware while the integrated converters and comparators measure or generate analog signals. This consolidation can reduce board area, external component count, and system complexity in industrial control, instrumentation, communications, and embedded data-acquisition equipment. The device operates at 25 MHz and provides 64 KB of flash plus 4352 bytes of on-chip RAM. Its 59 general-purpose digital I/O lines support multiple ports, while its mixed-signal resources include two 16-bit high-speed SAR ADCs, an eight-channel 10-bit ADC, and a two-channel 12-bit DAC. Three analog comparators support thresholding, waveform generation, and basic autonomous control functions. Communications resources include two UARTs, SPI, hardware SMBus compatible with I2C, and CAN 2.0B. According to the Silicon Labs C8051F06x manufacturer datasheet, the peripheral set also includes a programmable 16-bit counter/timer array with six capture/compare modules, five general-purpose 16-bit timers, and a dedicated watchdog timer. An internal calibrated precision oscillator is specified at 24.5 MHz. Typical applications include industrial process control, CAN-connected equipment, data-acquisition systems, analog control panels, test and measurement products, and embedded controllers requiring both serial communications and analog conversion. The integration of ADC, DAC, comparators, timers, and multiple serial interfaces allows a compact design without requiring separate analog or communication ICs. Designers should verify the exact package suffix and pin mapping against the manufacturer datasheet, because C8051F060R is ordered in package-specific forms such as C8051F060R-GQ. PCB layout should separate sensitive analog inputs from high-speed digital signals, provide appropriate analog grounding and bypass capacitance, and account for the thermal and decoupling requirements of the complete mixed-signal system. This page consolidates verified manufacturer and distributor information, package details, pricing references, same-family drop-in options, and practical selection guidance. It is intended to help engineers identify the correct 100-pin variant, compare MCU resources, and evaluate whether the C8051F060R provides sufficient analog, communications, and digital I/O capability for a new embedded design.

询价 联系我们
C8051F061 - 25MHz Mixed-Signal MCU | Silicon Labs
C8051F061

C8051F061 - 25MHz Mixed-Signal MCU | Silicon Labs

Silicon Labs C8051F061 is an 8-bit mixed-signal microcontroller operating up to 25 MHz, with 64 KB of flash memory and 24 digital I/O lines in a 64-TQFP 10 x 10 mm package. The device combines a 25 MIPS 8051 core with a 16-bit, single-channel, 1 Msps ADC, a 12-bit, two-channel DAC, and three analog comparators. Its supply-voltage range is 2.7 V to 3.6 V. A mixed-signal microcontroller is an embedded semiconductor that integrates digital processing with analog conversion and comparison functions. The C8051F061 belongs to the C8051F06x family and combines an 8051-compatible embedded processing core with on-chip ADC, DAC, comparator, timer, serial-interface, and communication resources. This mixed-signal MCU category reduces the need for separate analog and digital ICs when a product must measure, generate, or monitor analog signals. Key features include 64 KB of in-system-programmable flash, 4.25K x 8 RAM, five timers, a watchdog timer, and the Programmable Counter Array. Communication and peripheral resources include SPI, SMBus, I2C, two UARTs, and CAN 2.0B. The analog subsystem includes a 16-bit, one-channel ADC operating at 1 Msps, an eight-channel 10-bit ADC, a 12-bit, two-channel DAC, and three analog comparators. An on-chip temperature sensor is also listed for the device. The 25 MHz implementation delivers up to 25 MIPS while retaining the established 8051 instruction set and mixed-signal integration characteristic of the C8051F06x family. The 24 available digital I/O lines make the device appropriate for compact embedded controllers that need several serial interfaces and analog measurements without relying on a large external component count. The 64-pin TQFP package exposes the mixed-signal resources and digital interfaces on a surface-mount footprint. Typical uses include industrial sensor acquisition, process-control equipment, CAN-connected embedded instrumentation, data acquisition modules, and compact control panels. In these systems, the ADC can sample analog inputs, the DAC can generate reference or control voltages, and the UART, SPI, I2C, SMBus, and CAN interfaces can connect local sensors, actuators, and supervisory electronics. The integrated temperature sensor can also support local thermal monitoring where its accuracy is appropriate for the application. Designers should treat the 2.7 V to 3.6 V supply range as a hard design constraint and provide decoupling close to the device pins. Analog and digital grounds, analog inputs, and high-impedance nodes require careful layout to limit noise and offset errors. Firmware migration should also verify peripheral availability and pin multiplexing for the selected C8051F06x variant rather than assuming that every family member has identical resources. This page combines verified distributor specifications, availability information, same-family drop-in candidates, package details, and practical design guidance. It adds engineering-focused comparisons that are not normally presented together on a distributor product page, helping designers evaluate the C8051F061 for embedded control, analog measurement, and communication applications.

USD $37.73 有现货
C8051F061R - 25MHz Mixed-Signal MCU | Silicon Labs (Tape & Reel)
C8051F061R

C8051F061R - 25MHz Mixed-Signal MCU | Silicon Labs (Tape & Reel)

Silicon Labs C8051F061R is an 8-bit mixed-signal microcontroller operating up to 25 MHz, with 64 KB of flash memory and 24 digital I/O lines in a 64-TQFP 10 x 10 mm package. The device combines a 25 MIPS 8051 core with a 16-bit, single-channel, 1 Msps ADC, a 12-bit, two-channel DAC, and three analog comparators. Its supply-voltage range is 2.7 V to 3.6 V. A mixed-signal microcontroller is an embedded semiconductor that integrates digital processing with analog conversion and comparison functions. The C8051F061R belongs to the C8051F06x family and combines an 8051-compatible embedded processing core with on-chip ADC, DAC, comparator, timer, serial-interface, and communication resources. This mixed-signal MCU category reduces the need for separate analog and digital ICs when a product must measure, generate, or monitor analog signals. Key features include 64 KB of in-system-programmable flash, 4.25K x 8 RAM, five timers, a watchdog timer, and the Programmable Counter Array. Communication and peripheral resources include SPI, SMBus, I2C, two UARTs, and CAN 2.0B. The analog subsystem includes a 16-bit, one-channel ADC operating at 1 Msps, an eight-channel 10-bit ADC, a 12-bit, two-channel DAC, and three analog comparators. An on-chip temperature sensor is also listed for the device. The 25 MHz implementation delivers up to 25 MIPS while retaining the established 8051 instruction set and mixed-signal integration characteristic of the C8051F06x family. The 24 available digital I/O lines make the device appropriate for compact embedded controllers that need several serial interfaces and analog measurements without relying on a large external component count. The 64-pin TQFP package exposes the mixed-signal resources and digital interfaces on a surface-mount footprint. Typical uses include industrial sensor acquisition, process-control equipment, CAN-connected embedded instrumentation, data acquisition modules, and compact control panels. In these systems, the ADC can sample analog inputs, the DAC can generate reference or control voltages, and the UART, SPI, I2C, SMBus, and CAN interfaces can connect local sensors, actuators, and supervisory electronics. The integrated temperature sensor can also support local thermal monitoring where its accuracy is appropriate for the application. Designers should treat the 2.7 V to 3.6 V supply range as a hard design constraint and provide decoupling close to the device pins. Analog and digital grounds, analog inputs, and high-impedance nodes require careful layout to limit noise and offset errors. Firmware migration should also verify peripheral availability and pin multiplexing for the selected C8051F06x variant rather than assuming that every family member has identical resources. This page combines verified distributor specifications, availability information, same-family drop-in candidates, package details, and practical design guidance. It adds engineering-focused comparisons that are not normally presented together on a distributor product page, helping designers evaluate the C8051F061R for embedded control, analog measurement, and communication applications.

USD $37.73 有现货
C8051F062 - 25MHz Mixed-Signal 8051 MCU | Silicon Labs
C8051F062

C8051F062 - 25MHz Mixed-Signal 8051 MCU | Silicon Labs

The Silicon Labs C8051F062 is an 8-bit mixed-signal microcontroller with a 25 MHz 8051 core, 64 KB of flash program memory, 4.25 KB of RAM, and 59 digital I/O pins in a 100-pin TQFP package. Its integrated analog resources include a 16-bit 1 Msps ADC, a 12-bit two-channel DAC, and three comparators, while the C8051F06x family also supports two integrated 16-bit 1 Msps ADCs according to the retrieved family documentation. A mixed-signal microcontroller is an embedded controller that combines a digital processor with analog-to-digital converters, digital-to-analog converters, comparators, and communication peripherals on one silicon device. This MCU belongs to the hierarchy 8051 microcontroller, embedded processor, mixed-signal MCU, and system-on-chip. Integrating these functions reduces component count and lets a single controller acquire analog measurements, execute control logic, and communicate with external equipment. The C8051F062 operates at 25 MHz and includes 64 KB of flash memory for firmware storage, 4.25 KB of internal RAM, and 59 digital I/O pins. Its 16-bit ADC supports 1 Msps conversion performance, while the 12-bit two-channel DAC provides controlled analog output. Three integrated comparators support thresholding and fast signal conditioning. CAN connectivity expands the device beyond basic serial communications for industrial and embedded control systems. Technically, the C8051F062 combines a C8051F06x-compatible 8051 architecture with analog peripherals intended to reduce external signal-chain complexity. The 64 KB flash capacity permits larger embedded applications than smaller MCU variants, while the 4.25 KB RAM supports working data and stack requirements. Its 2.7 V to 3.6 V supply range is consistent with 3.3 V systems, although system-level design must account for signal-level compatibility at every peripheral. Typical uses include industrial monitoring, sensor acquisition, process-control equipment, communications modules, data-acquisition systems, and compact embedded controllers. The ADC and comparators suit mixed sensor inputs, the DAC supports control or reference signals, and CAN is useful where deterministic field-bus communication is required. Designers should verify the exact package pinout, exposed-pad requirements, clock configuration, analog-input limits, and decoupling requirements in the manufacturer datasheet before layout. Because this MCU combines high-speed conversion and digital switching, careful grounding, local analog bypassing, and separation of sensitive analog traces from digital return currents are essential. This page consolidates verified distributor pricing, family-level alternatives, package information, comparison parameters, and practical mixed-signal design guidance into one engineering-focused reference while explicitly identifying values that still require confirmation from the official datasheet.

询价 联系我们
C8051F062R - 25MHz Mixed-Signal 8051 MCU | Silicon Labs (Tape & Reel)
C8051F062R

C8051F062R - 25MHz Mixed-Signal 8051 MCU | Silicon Labs (Tape & Reel)

The Silicon Labs C8051F062R is an 8-bit mixed-signal microcontroller with a 25 MHz 8051 core, 64 KB of flash program memory, 4.25 KB of RAM, and 59 digital I/O pins in a 100-pin TQFP package. Its integrated analog resources include a 16-bit 1 Msps ADC, a 12-bit two-channel DAC, and three comparators, while the C8051F06x family also supports two integrated 16-bit 1 Msps ADCs according to the retrieved family documentation. A mixed-signal microcontroller is an embedded controller that combines a digital processor with analog-to-digital converters, digital-to-analog converters, comparators, and communication peripherals on one silicon device. This MCU belongs to the hierarchy 8051 microcontroller, embedded processor, mixed-signal MCU, and system-on-chip. Integrating these functions reduces component count and lets a single controller acquire analog measurements, execute control logic, and communicate with external equipment. The C8051F062R operates at 25 MHz and includes 64 KB of flash memory for firmware storage, 4.25 KB of internal RAM, and 59 digital I/O pins. Its 16-bit ADC supports 1 Msps conversion performance, while the 12-bit two-channel DAC provides controlled analog output. Three integrated comparators support thresholding and fast signal conditioning. CAN connectivity expands the device beyond basic serial communications for industrial and embedded control systems. Technically, the C8051F062R combines a C8051F06x-compatible 8051 architecture with analog peripherals intended to reduce external signal-chain complexity. The 64 KB flash capacity permits larger embedded applications than smaller MCU variants, while the 4.25 KB RAM supports working data and stack requirements. Its 2.7 V to 3.6 V supply range is consistent with 3.3 V systems, although system-level design must account for signal-level compatibility at every peripheral. Typical uses include industrial monitoring, sensor acquisition, process-control equipment, communications modules, data-acquisition systems, and compact embedded controllers. The ADC and comparators suit mixed sensor inputs, the DAC supports control or reference signals, and CAN is useful where deterministic field-bus communication is required. Designers should verify the exact package pinout, exposed-pad requirements, clock configuration, analog-input limits, and decoupling requirements in the manufacturer datasheet before layout. Because this MCU combines high-speed conversion and digital switching, careful grounding, local analog bypassing, and separation of sensitive analog traces from digital return currents are essential. This page consolidates verified distributor pricing, family-level alternatives, package information, comparison parameters, and practical mixed-signal design guidance into one engineering-focused reference while explicitly identifying values that still require confirmation from the official datasheet.

询价 联系我们
C8051F063 - 25MHz 64KB Mixed-Signal MCU | Silicon Labs
C8051F063

C8051F063 - 25MHz 64KB Mixed-Signal MCU | Silicon Labs

The Silicon Labs C8051F063 is an 8-bit mixed-signal microcontroller with a 25 MHz CIP-51 8051 core, 64 KB of Flash program memory, 4.25 KB of RAM, and a 64-pin TQFP package measuring 10 mm by 10 mm. It delivers 25 MIPS while integrating a 16-bit, single-channel, 1 Msps ADC, a 12-bit, two-channel DAC, three comparators, and 24 general-purpose I/O pins. An 8-bit microcontroller is a programmable semiconductor that combines a central processing unit, memory, and peripherals on one integrated circuit. The C8051F06x family is designed for mixed-signal control systems, where a controller must process digital logic while measuring analog inputs and generating analog outputs. Within the product hierarchy, the C8051F063 is an MCU, an embedded controller, and a semiconductor integrating computation, communication, and analog-conversion functions. The 64 KB of Flash provides substantially more program capacity than a small 8-bit control device with legacy mask-program or limited memory options. The 4.25 KB data-RAM allocation supports working variables, stacks, buffers, and peripheral state. Its 25 MIPS processing capability enables time-sensitive control tasks, while the 24 I/O pins provide interfaces for sensors, actuators, logic signals, and external peripherals. The mixed-signal peripherals reduce the need for separate conversion hardware. The 16-bit, one-channel ADC operates at up to 1 Msps for analog measurements, while the 12-bit, two-channel DAC provides two analog output paths. Three integrated comparators support threshold detection, overvoltage monitoring, and fast response functions. The verified distributor data also identifies the device as an 8-bit 8051 C8051F06x MCU with CAN capability. Typical uses include industrial monitoring and control, laboratory instrumentation, sensor acquisition, process-control equipment, embedded communications, and compact control panels. The combination of CAN capability, analog conversion, comparators, and a relatively high I/O count makes the C8051F063 appropriate for designs requiring local analog measurement and digital communication without relying on a separate converter. Designers should verify the complete electrical limits, clock configuration, pin multiplexing, and peripheral-resource arrangement in the manufacturer datasheet before layout or firmware release. Adequate decoupling, careful analog grounding, and controlled routing between the analog and digital sections are essential in a mixed-signal design. The supplied verified data does not expose the complete pin names, so no unverified pinout mapping is presented here. This page consolidates the verified distributor specifications, mixed-signal feature summary, sourcing links, family-level replacement guidance, and practical design considerations. It distinguishes confirmed C8051F063 characteristics from fields that require confirmation in the manufacturer datasheet, helping engineers evaluate the MCU without relying on incomplete catalog summaries.

询价 联系我们
C8051F063R - 25MHz 64KB Mixed-Signal MCU | Silicon Labs (Tape & Reel)
C8051F063R

C8051F063R - 25MHz 64KB Mixed-Signal MCU | Silicon Labs (Tape & Reel)

The Silicon Labs C8051F063R is an 8-bit mixed-signal microcontroller with a 25 MHz CIP-51 8051 core, 64 KB of Flash program memory, 4.25 KB of RAM, and a 64-pin TQFP package measuring 10 mm by 10 mm. It delivers 25 MIPS while integrating a 16-bit, single-channel, 1 Msps ADC, a 12-bit, two-channel DAC, three comparators, and 24 general-purpose I/O pins. An 8-bit microcontroller is a programmable semiconductor that combines a central processing unit, memory, and peripherals on one integrated circuit. The C8051F06x family is designed for mixed-signal control systems, where a controller must process digital logic while measuring analog inputs and generating analog outputs. Within the product hierarchy, the C8051F063R is an MCU, an embedded controller, and a semiconductor integrating computation, communication, and analog-conversion functions. The 64 KB of Flash provides substantially more program capacity than a small 8-bit control device with legacy mask-program or limited memory options. The 4.25 KB data-RAM allocation supports working variables, stacks, buffers, and peripheral state. Its 25 MIPS processing capability enables time-sensitive control tasks, while the 24 I/O pins provide interfaces for sensors, actuators, logic signals, and external peripherals. The mixed-signal peripherals reduce the need for separate conversion hardware. The 16-bit, one-channel ADC operates at up to 1 Msps for analog measurements, while the 12-bit, two-channel DAC provides two analog output paths. Three integrated comparators support threshold detection, overvoltage monitoring, and fast response functions. The verified distributor data also identifies the device as an 8-bit 8051 C8051F06x MCU with CAN capability. Typical uses include industrial monitoring and control, laboratory instrumentation, sensor acquisition, process-control equipment, embedded communications, and compact control panels. The combination of CAN capability, analog conversion, comparators, and a relatively high I/O count makes the C8051F063R appropriate for designs requiring local analog measurement and digital communication without relying on a separate converter. Designers should verify the complete electrical limits, clock configuration, pin multiplexing, and peripheral-resource arrangement in the manufacturer datasheet before layout or firmware release. Adequate decoupling, careful analog grounding, and controlled routing between the analog and digital sections are essential in a mixed-signal design. The supplied verified data does not expose the complete pin names, so no unverified pinout mapping is presented here. This page consolidates the verified distributor specifications, mixed-signal feature summary, sourcing links, family-level replacement guidance, and practical design considerations. It distinguishes confirmed C8051F063R characteristics from fields that require confirmation in the manufacturer datasheet, helping engineers evaluate the MCU without relying on incomplete catalog summaries.

询价 联系我们
C8051F064 - 25MHz 8051 Mixed-Signal MCU | Silicon Labs
C8051F064

C8051F064 - 25MHz 8051 Mixed-Signal MCU | Silicon Labs

The Silicon Labs C8051F064 is an 8-bit mixed-signal 8051 microcontroller operating at 25 MHz, with 64 KB of Flash memory in a 100-pin TQFP package measuring 14 mm by 14 mm. It integrates a 16-bit, single-channel, 1 Msps ADC, a 12-bit DAC, and three comparators, giving embedded designers mixed-signal acquisition and output capability without requiring separate converters. A microcontroller is a programmable system-on-chip combining a processor core, nonvolatile memory, digital I/O, timers, serial interfaces, and analog peripherals. The C8051F06x family combines the legacy-compatible 8051 instruction set with mixed-signal resources. Within the broader hierarchy, it is a microcontroller, then an embedded processor, then an integrated circuit and semiconductor. Its analog integration is particularly useful for compact industrial-control and measurement designs that need sampling, threshold comparison, and voltage generation in one package. Key features include 25 MHz processing, 64 KB of Flash program memory, 59 digital I/O pins, two integrated 16-bit 1 Msps ADCs according to the family description, a 12-bit DAC, and three integrated comparators. The 100-pin TQFP provides 59 digital I/O pins for the C8051F060, C8051F062, C8051F064, and C8051F066 members of the family. The combination of flash storage, mixed-signal conversion, and abundant I/O supports control-loop, acquisition, and communications functions on a single PCB. The C8051F06x architecture is designed around the powerful 8051 core with 25 MHz performance. Its two 16-bit, 1 Msps ADCs support sampled analog measurements, while the 12-bit DAC provides an analog output derived from software-defined data. Three comparators support threshold detection and monitoring functions. This mixed-signal arrangement allows a single device to collect sensor information, evaluate comparator thresholds, generate an analog reference or control voltage, and manage external equipment through digital interfaces. Typical uses include industrial sensor acquisition, process-control panels, laboratory instrumentation, environmental monitoring, embedded analog control, and communication-oriented control modules. For a 16-bit, 1 Msps conversion stage, the firmware can sample rapidly enough for many measurement and monitoring tasks, although the overall system timing also depends on the selected pins, peripherals, firmware execution, and front-end conditioning. Designers should follow the manufacturer datasheet for the exact 100-pin assignments, oscillator requirements, analog-pin recommendations, and decoupling configuration. The complete pin map is not present in the supplied verified text, so this page does not infer individual pin names. PCB planning should reserve clean analog routing, solid ground distribution, suitable input impedance, and appropriate filtering between external sensors and the integrated ADC inputs. This page consolidates the verified distributor listing, family-level mixed-signal specifications, package information, and same-package alternatives into an engineering-focused selection guide. It also distinguishes confirmed C8051F06x family options from cross-brand replacements, helping designers identify candidates without mistaking a broadly similar microcontroller for a verified pin-compatible substitute.

询价 联系我们
C8051F064R - 25MHz 8051 Mixed-Signal MCU | Silicon Labs (Tape & Reel)
C8051F064R

C8051F064R - 25MHz 8051 Mixed-Signal MCU | Silicon Labs (Tape & Reel)

The Silicon Labs C8051F064R is an 8-bit mixed-signal 8051 microcontroller operating at 25 MHz, with 64 KB of Flash memory in a 100-pin TQFP package measuring 14 mm by 14 mm. It integrates a 16-bit, single-channel, 1 Msps ADC, a 12-bit DAC, and three comparators, giving embedded designers mixed-signal acquisition and output capability without requiring separate converters. A microcontroller is a programmable system-on-chip combining a processor core, nonvolatile memory, digital I/O, timers, serial interfaces, and analog peripherals. The C8051F06x family combines the legacy-compatible 8051 instruction set with mixed-signal resources. Within the broader hierarchy, it is a microcontroller, then an embedded processor, then an integrated circuit and semiconductor. Its analog integration is particularly useful for compact industrial-control and measurement designs that need sampling, threshold comparison, and voltage generation in one package. Key features include 25 MHz processing, 64 KB of Flash program memory, 59 digital I/O pins, two integrated 16-bit 1 Msps ADCs according to the family description, a 12-bit DAC, and three integrated comparators. The 100-pin TQFP provides 59 digital I/O pins for the C8051F060, C8051F062, C8051F064R, and C8051F066 members of the family. The combination of flash storage, mixed-signal conversion, and abundant I/O supports control-loop, acquisition, and communications functions on a single PCB. The C8051F06x architecture is designed around the powerful 8051 core with 25 MHz performance. Its two 16-bit, 1 Msps ADCs support sampled analog measurements, while the 12-bit DAC provides an analog output derived from software-defined data. Three comparators support threshold detection and monitoring functions. This mixed-signal arrangement allows a single device to collect sensor information, evaluate comparator thresholds, generate an analog reference or control voltage, and manage external equipment through digital interfaces. Typical uses include industrial sensor acquisition, process-control panels, laboratory instrumentation, environmental monitoring, embedded analog control, and communication-oriented control modules. For a 16-bit, 1 Msps conversion stage, the firmware can sample rapidly enough for many measurement and monitoring tasks, although the overall system timing also depends on the selected pins, peripherals, firmware execution, and front-end conditioning. Designers should follow the manufacturer datasheet for the exact 100-pin assignments, oscillator requirements, analog-pin recommendations, and decoupling configuration. The complete pin map is not present in the supplied verified text, so this page does not infer individual pin names. PCB planning should reserve clean analog routing, solid ground distribution, suitable input impedance, and appropriate filtering between external sensors and the integrated ADC inputs. This page consolidates the verified distributor listing, family-level mixed-signal specifications, package information, and same-package alternatives into an engineering-focused selection guide. It also distinguishes confirmed C8051F06x family options from cross-brand replacements, helping designers identify candidates without mistaking a broadly similar microcontroller for a verified pin-compatible substitute.

询价 联系我们
C8051F065 - 25MHz 8-Bit Mixed-Signal MCU | Silicon Labs
C8051F065

C8051F065 - 25MHz 8-Bit Mixed-Signal MCU | Silicon Labs

Silicon Labs C8051F065 is a highly integrated mixed-signal 8-bit microcontroller with a 25 MHz 8051 core, 64 KB of embedded flash memory, and a 64-pin TQFP package measuring 10 mm by 10 mm. The device combines digital control with two 16-bit 1 Msps ADCs, a 12-bit DAC, and three comparators in one package. Its supply-voltage range is 2.7 V to 3.6 V, and the C8051F065 variant provides 24 digital I/O pins. A mixed-signal microcontroller is an embedded system-on-chip that combines a processor core with analog and digital peripherals. In the product hierarchy, the C8051F065 is a microcontroller, also called an MCU, within the broader semiconductor and embedded-control category. Integrating the ADC, DAC, and comparators with the CPU reduces the number of external components needed for compact instrumentation, industrial monitoring, and control designs while keeping analog measurements and control outputs within one embedded platform. Key features include 25 MHz processing performance, 64 KB flash for firmware, two 16-bit ADCs operating at up to 1 Msps, a 12-bit DAC, three analog comparators, and 24 digital I/O pins. The 2.7 V to 3.6 V operating range supports low-voltage embedded systems. These resources make the MCU suitable for applications requiring both continuous signal acquisition and programmable analog output without adding separate data-conversion devices. The C8051F06x family uses the enhanced CIP-51 core architecture and mixed-signal peripherals. Two ADCs provide independent or sampled analog channels for sensors, transducers, and control loops, while the DAC supports programmable reference or output generation. The three comparators support threshold detection and fast digital events. Detailed ADC acquisition timing, DAC accuracy, memory organization, and peripheral register behavior should be confirmed in the manufacturer datasheet before firmware and PCB sign-off. Typical applications include industrial process measurement, sensor instrumentation, motor or actuator control, data acquisition modules, and compact embedded control systems. The 1 Msps ADC throughput supports signal capture when paired with suitable front-end conditioning, while the DAC allows output voltage generation for calibration or test systems. The 24 I/O pins can connect digital controls, status indicators, and external interface signals where the total pin count is sufficient. PCB design should account for the 64-pin TQFP footprint, 10 mm by 10 mm body size, and the device's low-voltage analog supply requirements. Place decoupling capacitors close to the supply pins, route analog inputs away from switching nodes, and provide a clean return path for reference and measurement circuits. Firmware must also configure unused pins and analog channels appropriately to avoid unintended analog behavior or excess current consumption. This page consolidates verified distributor specifications, the mixed-signal feature set, practical application guidance, and the search for genuine drop-in replacements. The supplied data identifies the C8051F065-GQ and C8051F065-GQR orderable variants, but it does not substantiate five pin-compatible substitute devices, so no unverified alternatives are presented as drop-in replacements.

询价 联系我们
C8051F065R - 25MHz 8-Bit Mixed-Signal MCU | Silicon Labs (Tape & Reel)
C8051F065R

C8051F065R - 25MHz 8-Bit Mixed-Signal MCU | Silicon Labs (Tape & Reel)

Silicon Labs C8051F065R is a highly integrated mixed-signal 8-bit microcontroller with a 25 MHz 8051 core, 64 KB of embedded flash memory, and a 64-pin TQFP package measuring 10 mm by 10 mm. The device combines digital control with two 16-bit 1 Msps ADCs, a 12-bit DAC, and three comparators in one package. Its supply-voltage range is 2.7 V to 3.6 V, and the C8051F065R variant provides 24 digital I/O pins. A mixed-signal microcontroller is an embedded system-on-chip that combines a processor core with analog and digital peripherals. In the product hierarchy, the C8051F065R is a microcontroller, also called an MCU, within the broader semiconductor and embedded-control category. Integrating the ADC, DAC, and comparators with the CPU reduces the number of external components needed for compact instrumentation, industrial monitoring, and control designs while keeping analog measurements and control outputs within one embedded platform. Key features include 25 MHz processing performance, 64 KB flash for firmware, two 16-bit ADCs operating at up to 1 Msps, a 12-bit DAC, three analog comparators, and 24 digital I/O pins. The 2.7 V to 3.6 V operating range supports low-voltage embedded systems. These resources make the MCU suitable for applications requiring both continuous signal acquisition and programmable analog output without adding separate data-conversion devices. The C8051F06x family uses the enhanced CIP-51 core architecture and mixed-signal peripherals. Two ADCs provide independent or sampled analog channels for sensors, transducers, and control loops, while the DAC supports programmable reference or output generation. The three comparators support threshold detection and fast digital events. Detailed ADC acquisition timing, DAC accuracy, memory organization, and peripheral register behavior should be confirmed in the manufacturer datasheet before firmware and PCB sign-off. Typical applications include industrial process measurement, sensor instrumentation, motor or actuator control, data acquisition modules, and compact embedded control systems. The 1 Msps ADC throughput supports signal capture when paired with suitable front-end conditioning, while the DAC allows output voltage generation for calibration or test systems. The 24 I/O pins can connect digital controls, status indicators, and external interface signals where the total pin count is sufficient. PCB design should account for the 64-pin TQFP footprint, 10 mm by 10 mm body size, and the device's low-voltage analog supply requirements. Place decoupling capacitors close to the supply pins, route analog inputs away from switching nodes, and provide a clean return path for reference and measurement circuits. Firmware must also configure unused pins and analog channels appropriately to avoid unintended analog behavior or excess current consumption. This page consolidates verified distributor specifications, the mixed-signal feature set, practical application guidance, and the search for genuine drop-in replacements. The supplied data identifies the C8051F065R-GQ and C8051F065R-GQR orderable variants, but it does not substantiate five pin-compatible substitute devices, so no unverified alternatives are presented as drop-in replacements.

询价 联系我们
C8051F066 - 25MHz 8-Bit Mixed-Signal MCU, 32KB Flash | Silicon Labs
C8051F066

C8051F066 - 25MHz 8-Bit Mixed-Signal MCU, 32KB Flash | Silicon Labs

The Silicon Labs C8051F066 is a highly integrated mixed-signal 8-bit microcontroller built on the enhanced CIP-51 core, delivering 25 MIPS of throughput at 25 MHz in a 100-lead TQFP (14 x 14 mm) package. It combines 32 KB of on-chip Flash program memory with a 16-bit, 1 Msps, single-channel successive-approximation ADC, a 12-bit DAC, and three analog comparators. An MCU (microcontroller unit) is a single-chip computer that integrates a CPU core, program memory, data memory, and peripherals. The C8051F06x family belongs to the broader 8051 lineage of 8-bit microcontrollers, itself part of the embedded processor and embedded systems hierarchy. Because the analog conversion, DAC output, and comparator functions are integrated on the same die, a C8051F066 board needs far fewer external components than a discrete 8051 design, shortening layout time and reducing board area. Key features of this device include 25 MIPS instruction throughput, 32 KB of Flash for in-circuit programming, a 16-bit ADC sampling at 1 Msps, a 12-bit DAC for analog output, three high-speed comparators with programmable hysteresis, an internal oscillator, machine-code USB bootloader support, and a 100-pin TQFP package with 10 analog inputs, four analog outputs, and up to 38 digital I/O. Two internal memory spaces, program Flash and internal RAM, keep firmware and working data on-chip. Technically, the C8051F066 sits in Silicon Labs' C8051F06x line, which extends the classic 8051 architecture with higher clock rates, faster 16-bit ADC hardware, and a more capable peripheral set than the original Intel-era 8051 devices. The CIP-51 core retains full 8051 instruction-set compatibility while adding a four-cycle pipeline, so existing 8051 code ports with minimal effort while gaining a substantial speed increase over 12 MHz original parts. Typical applications include industrial sensor acquisition and control panels, mixed-signal measurement instruments, low-cost USB-connected data loggers, power supply monitoring, motor and actuator control boards, and building-automation nodes where analog front-ends and digital control share one microcontroller. The 100-pin package exposes enough pins for simultaneous analog inputs, comparator outputs, and dense digital I/O in one design. When designing around the C8051F066, budget careful attention to analog front-end design: bypass the analog supply pins directly, keep ADC traces short and away from switching nodes, and reference the datasheet recommended layout for the analog ground connection. Also confirm that your firmware budget fits 32 KB of Flash and that the debugger/flashing toolchain matches the Silicon Labs C8051 platform. This page consolidates distributor listings, package and pinout references, and practical drop-in alternatives for the C8051F066, together with design notes and comparison data that go beyond the basics found in a bare manufacturer datasheet.

询价 联系我们
C8051F067 - 25MHz 8-Bit MCU, 32KB Flash | Silicon Labs
C8051F067

C8051F067 - 25MHz 8-Bit MCU, 32KB Flash | Silicon Labs

The Silicon Labs C8051F067 is an 8-bit mixed-signal microcontroller operating at up to 25 MHz, with 32 KB of Flash memory and a 64-pin TQFP package measuring 10 mm by 10 mm. It belongs to the C8051F06x family and combines a 8051-compatible core with mixed-signal peripherals for embedded control applications. The device is identified in distributor records as C8051F067-GQ when supplied in the 64-pin TQFP configuration. An 8-bit microcontroller is a programmable semiconductor that executes embedded control logic from a small internal program memory. The C8051F067 combines the 8051 instruction-set family with an enhanced silicon-laboratories core architecture and integrated analog functions. This places it in the broader hierarchy of embedded processor, microcontroller, mixed-signal MCU, and semiconductor product categories. Its architecture is intended for compact embedded systems that require deterministic control, serial communications, and analog measurement without requiring a high-performance 32-bit processor. The C8051F067 operates at up to 25 MHz, and an associated manufacturer-datasheet reference identifies the family as delivering up to 25 MIPS. Its 32 KB Flash program memory provides substantially more code storage than the smaller devices in the C8051F06x family. The mixed-signal feature set includes a 16-bit ADC according to the manufacturer-datasheet references, allowing the MCU to process measured analog signals in firmware and reducing the need for external analog-to-digital converters. The C8051F067 is identified in a 64-pin TQFP package measuring 10 mm by 10 mm. Its higher pin count provides access to the mixed-signal and digital resources required by industrial controls, instrumentation, communications equipment, and embedded measurement systems. The package is a surface-mount technology format, and its exposed perimeter construction supports compact PCB layouts while retaining a pin count high enough for extensive peripheral access. Typical applications include sensor-acquisition and condition-monitoring equipment, industrial control panels, communications modules, programmable instrumentation, and embedded data-acquisition systems. The 16-bit ADC is especially relevant when the design must digitize analog inputs while executing control and communication firmware on the same 8-bit core. The 25 MHz operating rate supports more responsive control loops than slower 8051-class devices, provided that the application timing is checked against the required instruction cycle. When designing around the C8051F067, begin with the complete pin-description table in the Silicon Labs manufacturer datasheet before assigning analog inputs, supply pins, programming interfaces, and ground connections. Decoupling requirements, reference voltages, reset behavior, oscillator configuration, and exposed-pin functions must follow that document. Firmware development also requires the appropriate Silicon Labs programming and debug configuration for the selected package and device revision. This product page combines the confirmed C8051F067 operating, memory, package, and analog specifications with focused design guidance, package-aware alternatives, and application-oriented engineering context. It is intended to help engineers identify the correct device, plan the PCB, and determine whether a C8051F06x family member can serve as a drop-in replacement without changing the 64-pin footprint.

询价 联系我们