集成电路

DSPIC33CK128MC106-I/PT

DSPIC33CK128MC106-I/PT - 16-bit DSC 128KB Flash 64-TQFP | Microchip

The Microchip Technology DSPIC33CK128MC106-I/PT is a 16-bit digital signal controller (DSC) with a 100 MIPS dsPIC33CK core, 128KB (128K x 8) of Flash program memory, 16KB of RAM, and integrated op amps, a 12-bit ADC, high-speed PWM, and CAN Flexible Data-Rate (CAN FD), packaged in a 64-pin TQFP (10x10 mm) surface-mount package. A digital signal controller combines the compute architecture of a microcontroller with the mathematical throughput of a digital signal processor. In the power-management hierarchy, a DSC sits above general-purpose MCUs for control-loop-intensive tasks: it executes a complete current-loop compensation cycle in a single PWM period, which is the defining requirement of modern digital power conversion and motor control. The dsPIC33CK family is Microchip's single-core, 16-bit DSC generation built for exactly these closed-loop workloads. Key differentiating features include the 100 MIPS single-core CPU with DSP engine (single-cycle MAC, 40-bit accumulator, barrel shifter), 128KB of Flash with live self-programming, a 12-bit 3.5 Msps ADC supporting multiple simultaneous sampling channels, on-chip op amps that eliminate external signal-conditioning stages, and high-resolution PWM peripherals with dedicated time base for phase-shifted and complementary converter topologies. On-chip CAN FD enables in-vehicle and industrial bus connectivity at data rates beyond classic CAN. Architecturally, the dsPIC33CK core uses a modified Harvard pipeline with zero-overhead loops and hardware division support, letting control firmware sustain FOC (field-oriented control) or average-current-mode loops at tens of kHz without CPU starvation. The peripheral Trigger and Interrupt routing system ties ADC sampling directly to PWM event timing, producing deterministic, low-jitter control loops. Typical applications include brushless DC and PMSM motor drives for industrial automation, digitally controlled AC-DC and DC-DC power supplies, automotive and industrial CAN FD nodes, and power-factor-correction stages. The combination of fast ADC, flexible PWM, and on-chip amplification makes a single DSPIC33CK128MC106-I/PT sufficient for an entire digital power control stage. A key design consideration is temperature grade selection: the -I suffix specifies -40C to +125C operation; use the -E or automotive-grade -H variants for harsher environments. Decouple VDD/VDDCORE rails per the manufacturer datasheet and route PWM traces away from analog ADC inputs. This page synthesizes distributor pricing, drop-in family alternatives, and practical design notes not found in the manufacturer datasheet, with prices as of 2026-09-22.

询价联系我们

DSPIC33CK128MC106T-I/MR

DSPIC33CK128MC106T-I/MR - 16-bit DSC 100MHz 128KB 64-QFN | Microchip

The Microchip Technology DSPIC33CK128MC106T-I/MR is a 16-bit digital signal controller (DSC) with a single 100 MIPS dsPIC33C core, 128KB (128K x 8) FLASH program memory, 16KB RAM, and an integrated 12-bit 20-channel ADC, housed in a 64-pin QFN (9x9 mm, MR) surface-mount package operating from 3V to 3.6V. A digital signal controller combines the compute architecture of a microcontroller with the math acceleration of a DSP in a single chip. Within the embedded hierarchy, the DSC sits above general-purpose MCUs and beside DSPs, offering deterministic interrupt latency and single-cycle MAC instructions that make it a power management IC controller of choice for switch-mode converters and motor drives. Key features include high-speed PWM peripherals with advanced dead-time and fault control, two 12-bit DACs for comparator references, integrated operational amplifiers that off-board external op-amps in current-sense paths, and CAN Flexible Data-Rate (CAN FD) for automotive and industrial networking. The 20-channel 12-bit ADC supports simultaneous sampling critical for three-phase current sensing. Architecturally, the dsPIC33CK core reaches 100 MIPS from a 3.3V rail using a pipelined design with DSP engine, barrel shifter, four DMA channels, and boundary-scan testability. The Cortex-like deterministic response keeps control loops predictable, and the extended -40C to +125C industrial temperature grade suits harsh environments. Typical applications include brushless DC and PMSM motor control (FOC), digital power supplies such as totem-pole PFC and LLC converters, and automotive/industrial CAN FD nodes. The op-amps and high-resolution PWM directly serve current shunt amplification and dead-time control in these loops. Design consideration: the 3.0V to 3.6V supply window is strict; provide a regulated 3.3V rail with local 0.1uF decoupling at every VDD/VSS pair, and exploit the 64-QFN exposed pad for ground return integrity. This page synthesizes distributor availability, drop-in family alternatives, and application-specific design notes beyond what the 984-page manufacturer datasheet presents.

询价联系我们

DSPIC33CK128MC106T-I/PT

DSPIC33CK128MC106T-I/PT - 16-bit DSC, 100MHz, 128KB Flash | Microchip

The Microchip Technology DSPIC33CK128MC106T-I/PT is a 16-bit Digital Signal Controller (DSC) with a 100 MHz dsPIC33C core, 128 KB Flash program memory, 16 KB RAM, and a 64-pin TQFP (10x10 mm) package. A Digital Signal Controller combines the compute architecture of a microcontroller with the mathematical throughput of a digital signal processor. In the embedded hierarchy, the dsPIC33CK family sits between general-purpose MCUs and dedicated DSPs: it executes a single-cycle MAC-style DSP instruction set while retaining MCU-class peripherals, interrupts, and C-code development workflows, making it a natural fit for power conversion and real-time control loops. Key features of the DSPIC33CK128MC106T-I/PT include the 100 MHz single dsPIC DSC core, high-speed PWM peripherals for switching power stages, on-chip 12-bit ADCs for multi-channel current and voltage sensing, and integrated operational amplifiers that reduce external component count in motor-control and digital-power designs. According to the Mouser listing, the part is summarized as a 16-bit DSC with 128KB Flash, 16KB RAM, OpAmps, 12-bit ADC, and PWM peripherals. Technical depth comes from the dsPIC33C core architecture, which pairs the 16-bit CPU with zero-overhead DSP instructions and deterministic interrupt response, enabling closed-loop control frequencies well into the hundreds of kilohertz. The device family also supports CAN Flexible Data-Rate (CAN FD) communication, as described in the Microchip family datasheet for the dsPIC33CK128MC106 series, which totals 984 pages and covers 16-bit Digital Signal Controllers with High-Speed PWM and CAN FD. Typical applications include brushless DC and PMSM motor control, digital power supplies (LLC, totem-pole PFC), solar micro-inverters, and industrial automation nodes that need CAN FD connectivity. The integrated op-amps and high-speed PWM make it especially attractive where a single chip must sense, compute, and drive a power stage. A key design consideration is thermal and supply design: the 10x10 mm TQFP must dissipate heat through its copper land pattern, and the ADC/PWM clocking scheme should be planned early, since the 100 MHz core requires careful decoupling and a stable clock source. This page synthesizes distributor availability data, drop-in alternatives, and practical design notes not found in the manufacturer datasheet, adding selection and cross-reference value for engineers.

询价联系我们

DSPIC33CK128MC502-I/2N

DSPIC33CK128MC502-I/2N - 100MHz DSC 128KB Flash UQFN-28 | Microchip

The Microchip Technology DSPIC33CK128MC502-I/2N is a 16-bit Digital Signal Controller (DSC) with a single 100 MHz dsPIC33CK core, 128 KB (128K x 8) of FLASH program memory and 16 KB of data memory, housed in a 28-pin UQFN (6x6 mm) package with 21 general-purpose I/O pins. A Digital Signal Controller combines the computational throughput of a digital signal processor (multiply-accumulate instructions, DSP engine, looping hardware) with the deterministic, interrupt-driven behavior of a microcontroller in a single chip. Within the power-management hierarchy of embedded systems, a DSC sits above general-purpose MCUs and below application processors, occupying the niche of real-time control: the dsPIC33 family is the direct descendant of the dsPIC30F/dsPIC33F lines and forms the core of Microchip's dsPIC33C generation, which adds functional-safety features (FuSa) for industrial and automotive-adjacent designs. Key features include a 100 MHz maximum core frequency executing up to 100 MIPS, high-speed PWM peripherals with 250 ps resolution for digital power conversion, and CAN Flexible Data-Rate (CAN FD) connectivity for modern industrial and automotive networks. The 3.0 V to 3.6 V supply window, 16 KB of on-chip RAM, and the on-chip DSP engine (single-cycle MAC, DSP addressing modes) differentiate this part from classic 16-bit MCUs. Architecturally, the dsPIC33CK core uses an optimized C compiler-friendly instruction set with hardware looping, bit-reversed addressing, and an integrated DSP multiply-accumulate unit. The device supports ICSP (In-Circuit Serial Programming) and debugging through PGECx/PGEDx pin pairs - any pair may be used, but each clock/data pair must be kept together. The Extended Temperature (-40C to +125C) 'I' grade option supports industrial environments. Typical applications include brushless DC and PMSM motor control, digital power supplies and PFC stages (exploiting the high-resolution PWM), and CAN FD nodes in industrial automation where the 100 MHz core must execute control loops at switching frequencies of 100 kHz or more. Design consideration: always decouple the internal core regulator (VCAP pin) and connect PGEC/PGED pairs correctly for programming; the UQFN package also requires attention to thermal pad soldering for reliable grounding. This page synthesizes distributor availability, drop-in same-family alternatives, application guidance, and design notes not found in the 984-page manufacturer datasheet.

询价联系我们

DSPIC33CK128MC502-I/SS

DSPIC33CK128MC502-I/SS - 16-bit 100MHz DSC, CAN FD | Microchip

The Microchip Technology DSPIC33CK128MC502-I/SS is a 16-bit Digital Signal Controller (DSC) with a single 100 MHz dsPIC DSC core, 128 KB of Flash program memory and 16 KB of RAM, housed in a 28-pin SSOP (SS) package rated for the industrial -40C to +85C temperature range. A Digital Signal Controller combines the compute characteristics of a microcontroller with the arithmetic throughput of a digital signal processor. Within the embedded hierarchy, the dsPIC33CK family sits between general-purpose MCUs and dedicated DSPs: it executes single-cycle MAC and DSP instructions while retaining the peripherals, interrupt structure and development ecosystem of a standard MCU. This makes DSCs the default choice where control loops and signal processing converge, such as digital power conversion and motor control. Key features of this part include the CAN Flexible Data-Rate (CAN FD) module for modern in-vehicle and industrial networks, a high-speed PWM peripheral with fine edge resolution for power conversion, and integrated analog: a 12-bit ADC and on-chip operational amplifiers that reduce external component count in current-sense and feedback paths. The 100 MHz core delivers roughly 100 MIPS of throughput, sufficient for field-oriented motor control at high PWM frequencies. Architecturally, the dsPIC33CK core features an enhanced instruction set with DSP engine support, independent program and data buses for parallel operand fetches, and up to three DAC outputs and multiple ADC core options in the family. The dual-partition Flash variant support in the wider family enables live firmware updates, an important capability in field-deployed industrial equipment. Typical applications include brushless DC and PMSM motor drives, digital switched-mode power supplies (totem-pole PFC, LLC converters), automotive and industrial CAN FD nodes, and high-performance general embedded control. Design-wise, plan the analog front end around the on-chip op-amp gain configurations and route high-current PWM traces away from the ADC inputs; the ICSP programming pairs (PGECx/PGEDx) must be used as matched pairs. This page synthesizes distributor availability data, drop-in same-family alternatives, and practical design notes not found in the manufacturer datasheet alone.

询价联系我们

DSPIC33CK128MC502T-I/2N

DSPIC33CK128MC502T-I/2N - 100MHz 16-bit DSC 128KB Flash | Microchip

The Microchip Technology DSPIC33CK128MC502T-I/2N is a 16-bit digital signal controller (DSC) delivering up to 100 MIPS of deterministic performance from its dsPIC33CK core, with 128 KB (128K x 8) of FLASH program memory and 16 KB of RAM, housed in a 28-pin UQFN (6x6 mm, 2N) surface-mount package. A digital signal controller combines the computational capability of a DSP with the peripheral integration and control architecture of a microcontroller. Within the embedded hierarchy, the DSC sits between general-purpose MCUs and dedicated DSPs, making it the preferred choice in power conversion and motor control where fast, deterministic interrupt response and precision analog sampling must coexist. Microchip's dsPIC33CK family implements this concept with a single-core, high-performance pipeline and tightly coupled PWM and ADC peripherals. Key features of the DSPIC33CK128MC502 include a 100 MHz (100 MIPS) dsPIC DSC core, on-chip operational amplifiers, a 12-bit ADC supporting high-rate conversions of motor phase currents, high-resolution PWM peripherals suitable for Field-Oriented Control (FOC), and CAN FD for robust industrial and automotive networking. The device operates from a 3.0 V to 3.6 V supply and offers 21 general-purpose I/O lines. Architecturally, the dsPIC33CK core executes most instructions in a single cycle with a zero-cycle (zero-overhead) DSP multiply-accumulate path, providing predictable worst-case timing that is critical for current-loop control at switching frequencies of 100 kHz and above. The ADC can be coupled with the PWM trigger hardware to sample exactly at the center of the PWM carrier, minimizing switching-noise-induced conversion errors without CPU intervention. Typical applications include brushless DC and PMSM motor drives using sensorless FOC, digital power supplies such as LLC and totem-pole PFC converters, CAN FD-connected industrial nodes, and high-intensity LED drivers. The integrated op-amps reduce external component count in current-sensing signal chains. Design consideration: the 3.0 V to 3.6 V supply range means a 5 V system bus requires an LDO or buck regulator ahead of the VDD pin, and decoupling plus the internal regulator capacitor must follow the datasheet layout guidance for noise immunity. This page synthesizes distributor pricing, drop-in family alternatives, pinout data, and practical design notes not consolidated in the manufacturer datasheet alone. Pricing references are as of 2026-09-22.

询价联系我们

DSPIC33CK128MC502T-I/SS

DSPIC33CK128MC502T-I/SS - 100MHz 16-bit DSC 128KB Flash | Microchip

The Microchip Technology DSPIC33CK128MC502T-I/SS is a 16-bit Digital Signal Controller (DSC) featuring a single 100 MHz dsPIC33CK core, 128KB (128K x 8) of Flash program memory, and 16KB of RAM, housed in a 28-pin SSOP (SS) surface-mount package with 0.65 mm terminal pitch and rated for -40C to +85C (industrial) operation. The T suffix denotes tape-and-reel packaging of the standard industrial-grade part. A Digital Signal Controller combines the computational throughput of a digital signal processor (DSP) with the peripheral integration and deterministic control of a microcontroller (MCU). Within the embedded-systems hierarchy, DSCs sit between general-purpose MCUs and dedicated DSPs, making them the preferred choice for closed-loop, time-critical control loops such as field-oriented motor control and digitally controlled power supplies. Key differentiating features include integrated operational amplifiers for current-sense signal conditioning, a 12-bit ADC supporting high-speed conversions, a High-Speed PWM module with advanced dead-time and complementary-output capabilities, and CAN Flexible Data-Rate (CAN FD) connectivity for modern automotive and industrial networks. These peripherals are tightly coupled to the 100 MHz DSP engine with hardware MAC and divide instructions, enabling single-cycle DSP operations. Architecturally, the dsPIC33CK core pairs a 16-bit CPU with DSP-enhanced instruction extensions and a two-stage instruction pipeline, while the enhanced peripheral ecosystem (DMA, configurable logic, and analog comparators) offloads time-critical tasks from software. The integrated op-amps directly buffer shunt-resistor current signals into the ADC, reducing external component count in motor-control designs. Typical applications include brushless DC (BLDC) and PMSM motor control, digital power conversion (totem-pole PFC, LLC converters), industrial automation nodes, and automotive-adjacent systems requiring CAN FD communication. Design consideration: the dsPIC33CK family typically requires a VCAP/VDDCORE stabilizing capacitor; follow the power-up sequencing and decoupling guidance in the manufacturer datasheet, and budget Flash carefully - 128KB is ample for FOC motor-control firmware with communication stacks. This page synthesizes distributor pricing, drop-in alternatives within the dsPIC33CK and dsPIC33CH families, and practical design notes not found in the 984-page manufacturer datasheet, adding selection and cross-reference value beyond raw spec repetition.

询价联系我们

DSPIC33CK128MC503-E/M5

DSPIC33CK128MC503-E/M5 - 16-bit 100MHz DSC, 128KB Flash | Microchip

The Microchip Technology DSPIC33CK128MC503-E/M5 is a 16-bit digital signal controller (DSC) from the dsPIC33CK family, featuring a 100 MHz dsPIC DSC core, 128 KB (128K x 8) of Flash program memory, 16 KB of RAM, and integrated on-chip peripherals including operational amplifiers, a 12-bit ADC, high-resolution PWM and CAN FD, housed in a 36-pin UQFN (5x5 mm) package with extended temperature operation. A digital signal controller combines the computational power of a digital signal processor with the control peripherals and ease of use of a microcontroller. Within the power-management hierarchy, the DSC sits above general-purpose MCUs in the dsPIC33C generation, providing deterministic interrupt latency, DSP multiply-accumulate instructions, and cycle-accurate peripherals targeted at closed-loop power conversion and motor control systems. Key features include the single 100 MHz dsPIC33CK core with DSP-enhanced instruction set, 128 KB Flash and 16 KB RAM for complex firmware and data logging, dual on-chip operational amplifiers that reduce external component count in current-sense paths, a 12-bit ADC supporting simultaneous sampling of multiple channels, and a CAN FD interface for robust industrial and automotive networking. The E suffix denotes the extended -40C to +125C operating range for harsh environments. Architecturally, the dsPIC33CK core executes from Flash with zero-wait-state prefetch, integrates DSP and fixed-point math units, and connects peripherals through crossbar-like routing that gives the 27 general-purpose I/O pins flexible mapping. High-resolution PWM modules support advanced switching topologies such as totem-pole PFC, LLC resonant converters, and three-phase inverter drives with cycle-level dead-time control. Typical applications include brushless DC and PMSM motor control, digital power supplies and solar inverters, and CAN FD networked industrial nodes. The on-chip op-amps and ADC make the part especially well suited to shunt-based phase-current sensing in compact motor-drive designs. Design consideration: the 3.0V to 3.6V supply window requires a tightly regulated rail; use the internal voltage regulator and place the recommended decoupling network at the VDD and AVDD pins per the manufacturer datasheet. This page synthesizes distributor pricing, same-family drop-in alternatives, and practical design notes not found in the manufacturer datasheet.

询价联系我们

DSPIC33CK128MC503T-I/M5

DSPIC33CK128MC503T-I/M5 - 16-bit DSC 128KB Flash CAN FD | Microchip

The Microchip Technology DSPIC33CK128MC503T-I/M5 is a 16-bit digital signal controller (DSC) with a 100 MHz dsPIC33CK core, 128 KB (128K x 8) FLASH program memory, 16 KB RAM, and integrated CAN FD, housed in a 36-pin UQFN (5x5 mm) surface-mount package. A digital signal controller combines the compute throughput of a DSP with the peripheral integration and ease of use of a microcontroller. Within the power-management hierarchy, the dsPIC33CK family sits between general-purpose MCUs and dedicated DSPs, offering single-cycle MAC/DSP instructions, fast interrupt handling, and deterministic control loops that make it the natural choice for closed-loop power conversion and motor control systems. Key features include the single 100 MHz dsPIC DSC core with DSP-enhanced instruction set, on-chip operational amplifiers, a 12-bit high-speed ADC, advanced high-resolution PWM modules, and a CAN FD controller for automotive and industrial networking. Four DMA channels offload data movement from the CPU, and an internal fast RC oscillator with PLL removes the need for an external crystal in many designs. Architecturally, the device uses a CMOS process with a modified Harvard bus, executing from zero-wait-state FLASH at full core speed. The ADC-PWM-OpAmp connectivity allows analog feedback loops to be closed entirely on-chip, minimizing CPU overhead in digital power applications. The Mouser listing explicitly identifies OpAmps, 12-bit ADC, PWM, and CAN FD as the peripheral set of this part. Typical applications include brushless DC and PMSM motor control, digital switched-mode power supplies (LLC, totem-pole PFC), solar micro-inverters, and battery-management systems where CAN FD connectivity is required. Designers should note the family supply range of approximately 3.0V to 3.6V and must budget the UQFN thermal pad soldering for reliable ground return during high-frequency PWM operation. This page synthesizes distributor pricing, drop-in family alternatives, application guidance, and design notes not found in the manufacturer datasheet alone.

询价联系我们

DSPIC33CK128MC505-E/M7

DSPIC33CK128MC505-E/M7 - 100MHz DSC 128KB Flash 48-VQFN | Microchip

The Microchip Technology DSPIC33CK128MC505-E/M7 is a 16-bit digital signal controller (DSC) with a single 100 MHz dsPIC DSC core, 128 KB (128K x 8) of FLASH program memory, and 16 KB of RAM, housed in a 48-pin VQFN (6x6 mm, M7) surface-mount package with extended temperature range (-40C to +125C, E grade). It integrates high-speed PWM, CAN Flexible Data-Rate (CAN FD), a 12-bit ADC, and on-chip operational amplifiers for embedded sensing and control. A digital signal controller combines the computational throughput of a DSP with the peripheral integration and deterministic control flow of a microcontroller. In the embedded systems hierarchy, the DSC sits between general-purpose MCUs and application-specific DSPs, making it a power-management IC for motor control loops, digital power supplies, and sensor fusion where fast interrupt handling and hardware math acceleration are required. Key features include the 100 MHz dsPIC33CK core (up to 100 MIPS), high-resolution PWM modules suited to digital power conversion and motor commutation, CAN FD for automotive and industrial networking, an integrated 12-bit ADC pipeline, and on-die op-amps that reduce external component count in current-sense amplification. Architecturally, the CMOS device uses an enhanced Harvard pipeline with DSP multiply-accumulate instructions and zero-overhead loops, giving deterministic execution for closed-loop control. The FLASH program memory has an 8-bit program memory width per Microchip USA data, and the controller supports in-circuit programming and debugging. Typical applications include brushless DC and PMSM motor control, digital power supplies (LLC, totem-pole PFC), automotive CAN FD nodes, industrial automation, and high-performance general embedded control. Design consideration: the E-grade device is rated to +125C ambient; verify junction temperature and thermal pad copper area in the 6x6 mm VQFN at full 100 MHz operation, and note distributor listings reference both 64 MHz and 100 MHz core figures - confirm configuration against the manufacturer datasheet. This page synthesizes distributor pricing, drop-in alternatives, datasheet links, and practical design notes not found in the manufacturer product page.

询价联系我们

DSPIC33CK128MC505-E/PT

DSPIC33CK128MC505-E/PT - 100MHz 16-bit DSC CAN FD | Microchip

The Microchip Technology DSPIC33CK128MC505-E/PT is a 16-bit Digital Signal Controller (DSC) with a 100 MIPS dsPIC33CK core, 128 KB (128K x 8) Flash program memory and 16 KB RAM, housed in a 48-pin TQFP (7x7 mm, 0.5 mm pitch) package with extended temperature rating (-40C to +125C). It integrates high-speed PWM, a 12-bit ADC, on-chip operational amplifiers, and CAN Flexible Data-Rate (CAN FD) peripherals in a single device. A Digital Signal Controller combines the compute throughput of a DSP with the deterministic control and peripheral set of a microcontroller. Within the power management hierarchy, a DSC sits between general-purpose MCUs and dedicated DSPs, making the dsPIC33CK family the standard choice for closed-loop digital power conversion and precision motor control where both fast math and rich analog peripherals are required. Key features include a single 100 MHz dsPIC DSC core with DSP instruction extensions and zero-overhead looping, four DMA channels, high-resolution PWM modules suited to peak-current-mode power supplies, and CAN FD for automotive and industrial networking. The 12-bit ADC supports simultaneous multi-channel sampling, while the integrated op-amps reduce external component count in current-sense front ends. Architecturally, the dsPIC33CK core uses a modified Harvard bus with separate program and data paths, enabling single-cycle MAC operations and deterministic interrupt latency. The E-grade option qualifies the device for operation across -40C to +125C, supporting thermally demanding industrial and automotive-adjacent environments. Typical applications include brushless DC (BLDC) and PMSM motor drives, digitally controlled switch-mode power supplies (SMPS) and LLC converters, and CAN FD networked control nodes in industrial automation and automotive subsystems. Design consideration: the DSPIC33CK128MC505 does not include a USB peripheral; system designers needing USB connectivity should evaluate the dual-core dsPIC33CH family instead, while keeping the same toolchain. This page synthesizes distributor pricing, drop-in same-family alternatives, pinout guidance, and practical design notes not found in the manufacturer datasheet.

询价联系我们

DSPIC33CK128MC505-I/PT

DSPIC33CK128MC505-I/PT - 100MHz 16-bit DSC, CAN FD | Microchip

The Microchip Technology DSPIC33CK128MC505-I/PT is a 16-bit Digital Signal Controller (DSC) featuring a single 100 MHz dsPIC DSC core, 128 KB (128K x 8) of Flash program memory and 16 KB of RAM, housed in a 48-pin TQFP (7x7 mm) surface-mount package. A Digital Signal Controller combines the computational capability of a digital signal processor (DSP) with the peripheral integration and deterministic control of a microcontroller (MCU). Within the power-management hierarchy of embedded systems, the DSC sits between a general-purpose MCU and a dedicated DSP, offering single-cycle MAC and DSP instructions plus tightly coupled motor-control peripherals, making it a natural fit for closed-loop power electronics. Key features include the high-speed PWM module with multiple complementary outputs for switching converters and motor drives, a 12-bit ADC pipeline capable of sampling at rates suited to current-loop control, CAN Flexible Data-Rate (CAN FD) connectivity for industrial and automotive networks, multiple UART/SPI/I2C serial interfaces, and direct memory access (DMA) channels that offload data movement from the CPU. The dsPIC33CK family uses an enhanced 16-bit dsPIC core executing up to 100 MIPS, with hardware DSP multiply-accumulate, barrel shifter, and modulo addressing. On-chip peripherals are connected through a high-bandwidth internal bus, and several analog comparators and op-amp style analog front-end resources support sensorless motor control and power conversion feedback loops without external amplification stages. Typical applications include brushless DC (BLDC) and PMSM motor drives, digital power supplies (LLC, totem-pole PFC), solar micro-inverters, and industrial automation nodes that require CAN FD communication. The 100 MHz core closes high-bandwidth current loops that slower MCUs cannot. When designing with this device, connect all VDD and VSS pins, and pair PGECx/PGEDx pins correctly for ICSP programming, since mixing pairs from different debug channels will cause programming to fail. This page synthesizes distributor pricing, drop-in family alternatives, and practical design notes not found in the manufacturer datasheet.

询价联系我们

DSPIC33CK128MC505T-I/M7

DSPIC33CK128MC505T-I/M7 - 100MHz 16-bit DSC, CAN FD | Microchip

The Microchip Technology DSPIC33CK128MC505T-I/M7 is a 16-bit digital signal controller (DSC) with a single 100 MHz dsPIC33CK core, 128 KB of Flash program memory, and 16 KB of RAM, housed in a 48-pin VQFN (6x6 mm, M7) surface-mount package with Tape and Reel delivery. A digital signal controller combines the computational power of a DSP with the peripheral integration and ease of use of a microcontroller. Within the power-management hierarchy of embedded systems, the dsPIC33CK family sits at the level of a 16-bit MCU/DSC optimized for real-time closed-loop control, sitting above general-purpose PIC16/PIC18 MCUs and below 32-bit application processors. DSCs are the workhorse of digital power conversion and motor control because they execute fast math-intensive control loops deterministically. Key differentiating features include the 100 MIPS dsPIC33CK core with DSP engine, integrated operational amplifiers that reduce external analog component count, a high-speed 12-bit ADC, and a CAN FD module for automotive and industrial networking. Multiple PWM channels support advanced motor-control and digital-power topologies with dead-time insertion and complementary outputs. On the technical side, the dsPIC33CK core uses an enhanced Harvard architecture with a single-cycle MAC and dual operand fetch, enabling filter and transform execution in real time. DMA channels offload the CPU for ADC-to-RAM streaming, and the internal oscillator (with PLL) allows full-speed 100 MHz operation without an external crystal, saving board space. An extended-temperature E/M7 variant is offered for harsh environments. Typical applications include brushless DC and PMSM motor control (FOC), digital power supplies such as LLC and totem-pole PFC, CAN FD nodes in automotive body and powertrain domains, and industrial automation sensing nodes where on-chip op-amps condition current-shunt signals directly. For design, budget the VCAP pin capacitor exactly as specified in the Microchip datasheet and keep the analog supply (AVDD/AVSS) plane separate from digital switching currents to preserve 12-bit ADC accuracy. This page synthesizes distributor inventory, drop-in family alternatives, and practical design notes not found in the manufacturer datasheet, giving engineers a single verified reference point.

询价联系我们

DSPIC33CK128MC505T-I/PT

DSPIC33CK128MC505T-I/PT - 100MHz DSC, 128KB Flash | Microchip

The Microchip Technology DSPIC33CK128MC505T-I/PT is a 16-bit Digital Signal Controller (DSC) featuring a single dsPIC33CK core running at up to 100 MIPS (100 MHz), 128 KB of Flash program memory, and 16 KB of RAM, housed in a 48-pin TQFP (7x7 mm, 0.5 mm pitch) package. The tape-and-reel suffix T supports automated high-volume assembly. A Digital Signal Controller combines the computational capability of a DSP with the peripheral integration and control-oriented architecture of a microcontroller. Within the power-management hierarchy of embedded systems, a DSC sits between a general-purpose MCU and a dedicated DSP, providing deterministic single-cycle MAC and DSP instructions alongside real-time control peripherals such as high-speed PWM, making it the standard choice for Field-Oriented Control (FOC) motor drives and digital power conversion. Key differentiating features include the 100 MHz dsPIC33CK core with DSP-enhanced instruction set, a 12-bit 3.5 Msps ADC with up to 20 input channels, two on-chip 12-bit DACs, and integrated operational amplifiers that reduce external BOM cost in current-sense paths. CAN FD (Flexible Data-rate) support enables modern automotive and industrial network nodes. Architecturally, the device belongs to Microchip's dsPIC33CK128MC505 family (part of the broader dsPIC33CK256MC50X documentation family), built on CMOS process technology with multiple internal bus architectures, a barrel shifter, four DMA channels, and hardware divide support. Operating voltage is 3.0 V to 3.6 V, with operation specified at -40C to +85C for the I temperature grade. Typical applications include brushless DC and PMSM motor control with sensorless FOC, digital power supplies such as totem-pole PFC and LLC converters, CAN FD networked industrial nodes, and high-performance general embedded control. A key design consideration: the 3.0-3.6 V supply rails require a stable LDO or buck regulator, and the 12-bit ADC reference should be decoupled carefully to preserve conversion accuracy at 3.5 Msps. This page synthesizes distributor pricing, drop-in family alternatives, and practical design notes not consolidated in the manufacturer datasheet.

询价联系我们

DSPIC33CK128MC506-E/MR

DSPIC33CK128MC506-E/MR - 16-bit 100MHz DSC CAN FD | Microchip

The Microchip Technology DSPIC33CK128MC506-E/MR is a 16-bit digital signal controller (DSC) with a single 100 MHz dsPIC DSC core, 128KB (128K x 8) Flash program memory, 16KB RAM, and CAN FD support, housed in a 64-pin QFN (9x9 mm) package with extended -40C to +125C temperature rating. A digital signal controller combines the computational capability of a digital signal processor with the control peripherals of a microcontroller on a single silicon die. Within the embedded control hierarchy, the DSC sits between general-purpose MCUs and dedicated DSPs, making the dsPIC33CK family well suited for control loops that need both fast math and rich analog and timing peripherals. Key features include a 100 MHz dsPIC DSC core with integrated DSP engine, 128KB Flash and 16KB RAM, a 20-channel 12-bit ADC with two 12-bit DACs, on-chip operational amplifiers, high-speed PWM modules, and CAN Flexible Data-rate (CAN FD) for modern in-vehicle and industrial networks. 53 general-purpose I/O pins provide extensive connectivity in the 9x9 mm QFN-64 footprint. Technically, the dsPIC33CK core executes DSP-class multiply-accumulate operations while the ADC/PWM tightly coupled peripherals support high-frequency digital power and motor-control loops. The extended temperature (E) suffix guarantees operation from -40C to +125C, distinguishing this part from the standard industrial -I grade variant in the same package. Typical applications include digital power supplies (totem-pole PFC, LLC converters), brushless DC and PMSM motor control, automotive and industrial CAN FD nodes, and advanced sensing and control systems that exploit the on-chip op amps and 12-bit converter pair. Design consideration: the 3.0V to 3.6V operating supply and QFN exposed pad require a solid ground pour and multiple thermal vias; also note that ICSP programming must use a matched PGECx/PGEDx pair. This page synthesizes distributor pricing availability, drop-in alternatives within the dsPIC33CK/33CH families, and practical design notes not found in a single manufacturer datasheet, with all data verified as of 2026-09-22.

询价联系我们

DSPIC33CK128MC506-E/PT

DSPIC33CK128MC506-E/PT - 100MHz 16-bit DSC, 128KB Flash | Microchip

The Microchip Technology DSPIC33CK128MC506-E/PT is a 16-bit digital signal controller (DSC) featuring a 100 MHz dsPIC33CK core, 128 KB (128K x 8) Flash memory, and 16 KB RAM, housed in a 64-pin TQFP (10 x 10 mm) package rated for -40C to +125C operation. A digital signal controller combines the computational throughput of a DSP with the peripheral integration and control architecture of a microcontroller. Within the embedded-system hierarchy, the DSC sits between a general-purpose MCU and a dedicated DSP, making it the preferred device class for closed-loop control loops that require both fast math execution and rich on-chip analog and timing peripherals. The dsPIC33CK family represents Microchip's single-core, 100 MHz generation of this device class. Key features include an integrated DSP engine with single-cycle MAC and dual 40-bit accumulators, on-chip operational amplifiers, a 12-bit high-speed ADC, high-resolution PWM peripherals, and CAN FD connectivity for automotive and industrial networks. These peripherals offload deterministic control tasks from software, reducing interrupt latency in time-critical loops. Architecturally, the DSPIC33CK128MC506 uses a modified Harvard pipeline running at up to 100 MIPS, with hardware division and DSP multiply-accumulate instructions. The 128 KB of Flash supports self-programming and firmware field updates, while the 16 KB RAM accommodates control variables, filter histories, and communication buffers for motor-control and digital-power algorithms. Typical applications include brushless DC and PMSM motor control, digital power supplies (LLC, totem-pole PFC), solar inverters, and industrial sensing nodes requiring CAN FD backhaul. The combination of high-speed PWM and fast ADC sampling suits sub-100 kHz switching power stages with cycle-by-cycle current limiting. For design, budget the ADC sampling and PWM update timing so control-loop jitter stays below one PWM period, and verify the -40C to +125C (E-grade) temperature derating on Flash endurance in your end application. This page synthesizes distributor pricing, same-family drop-in alternatives, and practical design notes not found in the manufacturer datasheet alone.

询价联系我们

DSPIC33CK128MC506-I/PT

DSPIC33CK128MC506-I/PT - 16-bit DSC 128KB Flash CAN FD | Microchip

The Microchip Technology DSPIC33CK128MC506-I/PT is a 16-bit Digital Signal Controller (DSC) with a single 100 MHz dsPIC DSC core, 128 KB Flash memory and 16 KB RAM, housed in a 64-pin TQFP (10x10 mm) package. It integrates on-chip operational amplifiers, a 12-bit ADC, high-resolution PWM and CAN FD, making it a single-chip solution for digital power and motor control. A Digital Signal Controller combines the computational capability of a digital signal processor with the peripheral set and ease of use of a microcontroller. Within the embedded control hierarchy, the dsPIC33CK family sits under Microchip's 16-bit DSC line, bridging general-purpose MCUs and dedicated DSPs for deterministic, math-intensive real-time control loops. Key features include the 100 MHz dsPIC33CK core with DSP instruction support, 128 KB of ECC Flash program memory, and 16 KB RAM for control-loop state. The peripheral complement covers the 12-bit ADC, multiple PWM channels for power conversion, CAN FD for automotive/industrial networking, and integrated op amps that reduce external component count in current-sense paths. Architecturally, the single-core dsPIC33CK family executes from zero-wait-state Flash with an enhanced DSP engine supporting multiply-accumulate operations, enabling high-bandwidth current loops in field-oriented motor control and digital power supplies. The package is the 64-TQFP (10x10 mm) with industrial temperature rating (-40C to +85C, suffix -I). Typical applications include brushless DC and PMSM motor drives, digital power supplies (totem-pole PFC, LLC converters), solar micro-inverters, and battery management systems where CAN FD networking, fast ADC sampling and high-resolution PWM converge. Design consideration: dsPIC33CK parts operate from a 3.0V to 3.6V supply, so plan level shifting for 5V industrial I/O. Multiple PGECx/PGEDx pin pairs support ICSP programming - use any pair, but keep clock and data pairs matched. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet.

询价联系我们

DSPIC33CK128MC506T-I/MR

DSPIC33CK128MC506T-I/MR - 16-bit DSC, 128KB Flash, CAN FD | Microchip

The Microchip Technology DSPIC33CK128MC506T-I/MR is a 16-bit digital signal controller (DSC) with a 100 MIPS dsPIC33CK core, 128KB (128K x 8) Flash program memory and 16KB RAM, housed in a 64-pin QFN (9x9 mm, MR) exposed-pad package in tape-and-reel (T) packaging with industrial (-40C to +85C, I) temperature grade. A digital signal controller combines the deterministic control of a microcontroller with the mathematical throughput of a DSP. In the power-management hierarchy, the dsPIC33CK family sits within Microchip's 16-bit DSC portfolio, purpose-built for real-time control loops such as Field-Oriented Control (FOC) motor drive and digital power conversion, where a single-cycle MAC, hardware divide and deterministic interrupt latency matter more than raw benchmark scores. Key features include the integrated CAN Flexible Data-rate (CAN FD) controller for automotive and industrial networks, on-chip operational amplifiers that front-end the 12-bit ADC for current-sense signals, and a high-speed PWM peripheral with advanced resolution suited to switching converters and motor inverters. Four DMA channels offload the core during high-rate ADC sampling. The 100 MIPS single-core architecture executes control loops with cycle-deterministic timing; the integrated op-amps reduce external component count in shunt-based current feedback paths, improving both BOM cost and noise performance. Typical applications include brushless DC and PMSM motor control, digital power supplies (LLC, totem-pole PFC), automotive and industrial CAN FD nodes, and advanced sensing systems. Design consideration: the 3.0V to 3.6V supply range requires a clean 3.3V rail; use the exposed pad as the primary ground path with a solid via array for thermal and EMC performance. This page adds distributor-verified availability data, same-family drop-in alternatives, and practical design notes beyond the manufacturer datasheet.

询价联系我们

DSPIC33CK128MC506T-I/PT

DSPIC33CK128MC506T-I/PT - 100MHz 128KB DSC | Microchip | Motor Control

The Microchip DSPIC33CK128MC506T-I/PT is a 16-bit digital signal controller (DSC) from the dsPIC33CK family with a 100 MHz dsPIC DSC core, 128 KB (128K x 8) of FLASH program memory, 16 KB of RAM, and a 64-pin TQFP (10 x 10 mm) package. A digital signal controller combines the computational capability of a digital signal processor (DSP) with the peripheral integration and control architecture of a microcontroller (MCU). DSCs occupy the hierarchy level between general-purpose MCUs and dedicated DSPs, making them a power management IC class of their own for real-time closed-loop control systems that need both fast math and rich on-chip peripherals in a single semiconductor device. Key features include a single 100 MHz dsPIC DSC core delivering up to 100 MIPS of deterministic performance, high-resolution PWM outputs for power conversion, a 12-bit ADC for precision sensing, integrated operational amplifiers (OpAmps), and a CAN FD interface for robust in-vehicle or industrial networking. Architecturally, the dsPIC33CK core integrates DSP multiply-accumulate instructions, hardware division support, and an enhanced interrupt controller, enabling deterministic Field-Oriented Control (FOC) loops for motor drives. The peripheral ecosystem - PWM, ADC, comparators, op-amps, and timers - is tightly coupled to the core so that sensor-to-PWM latency stays low and cycle-accurate. Typical applications include brushless DC (BLDC) and permanent-magnet synchronous motor (PMSM) control, digital power supplies (PFC, LLC), solar inverters, and industrial automation nodes requiring CAN FD connectivity. The 128 KB FLASH and 16 KB RAM provide headroom for full sensorless FOC firmware plus communication stacks. Design consideration: the device operates from a 3.0V to 3.6V supply, so verify decoupling and VDD/AVDD sequencing on multi-rail boards, and place the high-resolution PWM dead-time budget carefully when driving power stages. This page synthesizes distributor pricing, drop-in family alternatives, pinout data, and practical design notes not found in the manufacturer datasheet alone.

询价联系我们

DSPIC33CK128MP202-E/SS

DSPIC33CK128MP202-E/SS - 100MHz 16-bit DSC 128KB Flash | Microchip

The Microchip Technology DSPIC33CK128MP202-E/SS is a 16-bit digital signal controller (DSC) from the dsPIC33CK family, running the 100 MHz dsPIC DSC core with 128 KB of ECC-protected dual-partition Flash and 16 KB of data SRAM, housed in a 28-pin SSOP package. It operates from a 3.0V to 3.6V supply across -40C to +125C (extended grade, -E suffix) and is AEC-Q100 qualified for automotive use. A digital signal controller combines the compute throughput of a digital signal processor with the peripheral integration and ease of use of a microcontroller. In the power-management hierarchy, DSCs sit between general-purpose MCUs and full DSPs, providing multiply-accumulate DSP instructions alongside timers, PWM modules and high-speed ADCs - a combination purpose-built for closed-loop control systems such as switch-mode power supplies, motor drives and power-factor-correction stages. Key features include up to 100 MIPS performance, dual-panel Flash with ECC and Live Update support for in-field firmware upgrades, memory built-in self-test (MBIST) for functional-safety designs, integrated operational amplifiers, 12-bit ADCs and high-resolution PWM peripherals. The -E extended temperature suffix plus AEC-Q100 qualification makes this member suitable for automotive and harsh-environment industrial applications. Architecturally, the dsPIC33CK core uses a modified Harvard architecture with a single 100 MHz pipeline stage, DSP multiply-accumulate hardware and hardware division. The dual-partition program memory enables booting from either partition, supporting safe live-update sequences required in automotive OTA and functional-safety contexts. Typical applications include digital power supplies and LLC/PFC converters, brushless DC and PMSM motor control, automotive LED drivers and onboard chargers, and high-precision sensing systems. The integrated op-amps and 12-bit ADC reduce external analog component count in current-sensing loops. Design consideration: the device requires a VCAP pin stabilizing capacitor and careful AVDD/AVSS decoupling for ADC accuracy; the -E grade only guarantees -40C to +125C, so verify junction temperature margins at 100 MIPS operation. This page synthesizes distributor sourcing data, drop-in family alternatives, pinout information and practical design notes not found in the manufacturer datasheet alone.

询价联系我们

DSPIC33CK128MP202-I/2N

DSPIC33CK128MP202-I/2N - 100MHz 128KB DSC, CAN FD | Microchip

The Microchip Technology DSPIC33CK128MP202-I/2N is a single-core 16-bit digital signal controller (DSC) from the dsPIC33CK family, operating at up to 100 MHz (100 MIPS) with 128 KB (128K x 8) of dual-partition flash memory with ECC and Live Update, 16 KB of data SRAM, and a 250 ps resolution high-speed PWM, housed in a 28-pin UQFN (6x6 mm, 2N) package with an extended industrial operating range of -40C to +85C at 3.0 V to 3.6 V. A digital signal controller combines the control peripherals of a microcontroller with the math capability of a digital signal processor. In the power-management hierarchy, the dsPIC33CK sits within Microchip's 16-bit dsPIC33C DSC family, a class of devices purpose-built for closed-loop control systems that general-purpose MCUs often handle poorly because loop bandwidth and deterministic interrupt latency are critical. Key features include integrated op amps and 12-bit ADCs, high-resolution PWM with 250 ps edge placement for precision switching stages, CAN Flexible Data (CAN FD) support for automotive and industrial networks, and dual-panel flash enabling field firmware updates without downtime. Functional Safety (FuSa) documentation support makes it suitable for safety-oriented designs. Architecturally, the modified Harvard core delivers deterministic 100 MIPS single-cycle execution with DSP instructions (MAC, DSP multiply-accumulate) and hardware division. The ADC and PWM subsystems are tightly coupled, allowing sub-microsecond control-loop periods essential for digital power converters and motor commutation. Memory Built-In Self-Test (MBIST) and ECC flash strengthen reliability in always-on industrial equipment. Typical applications include digital switch-mode power supplies and PFC stages, BLDC/PMSM motor control with field-oriented control algorithms, automotive and industrial CAN FD nodes, and advanced sensing and control systems requiring fast analog acquisition. When designing, budget the 3.0 V to 3.6 V supply carefully and reserve the 250 ps PWM resolution for switching frequencies where dead-time control dominates losses; at very low PWM frequencies the resolution advantage diminishes. Decouple VDD pins per the manufacturer datasheet layout guidance. This page synthesizes distributor availability data, same-family drop-in alternatives, and practical design notes not found in the manufacturer datasheet.

询价联系我们

DSPIC33CK128MP202T-I/2N

DSPIC33CK128MP202T-I/2N - 100MHz DSC, 128KB Flash | Microchip

The Microchip Technology DSPIC33CK128MP202T-I/2N is a 16-bit digital signal controller (DSC) with a 100 MHz dsPIC33CK core, 128 KB of dual-partition program flash with ECC, and 16 KB of data SRAM, housed in a 28-pin UQFN (6x6 mm) surface-mount package. A digital signal controller combines the computational throughput of a microcontroller with the multiply-accumulate (DSP) capability of a digital signal processor. In the power-management hierarchy, a DSC such as this one sits at the apex of embedded control ICs, merging CPU, memory, analog peripherals, and high-resolution PWM into a single chip for closed-loop control of power conversion and motion systems. Key features include operation up to 100 MIPS from the dsPIC33C DSC core, integrated operational amplifiers that reduce external component count in current-sense paths, and 12-bit ADCs capable of sampling at up to 3.5 Msps for fast feedback loops. The high-resolution PWM (HRPWM) peripheral provides sub-nanosecond edge resolution, essential for peak-efficiency switching converters. A CAN Flexible Data (CAN FD) controller enables robust automotive and industrial communication. The modified Harvard architecture with dual-panel (live-update) flash supports field firmware updates without interrupting control loops, while ECC on program flash protects against single-bit errors in noisy power-electronics environments. DSP instructions such as MAC and DSP modulo addressing accelerate filter and transform computation for sensor processing. Typical applications include digital power supplies (LLC, totem-pole PFC), brushless DC and PMSM motor drives with field-oriented control, and industrial or automotive sensing nodes requiring CAN FD connectivity. The integrated op amps and ADC directly digitize shunt-current measurements, shortening the control-loop latency that determines converter transient response. Designers should power the device from a 3.0V to 3.6V supply and budget the VCAP/VDDCORE pin capacitor per the manufacturer datasheet; core-voltage regulation is internal, so external core supplies are not required. This page synthesizes distributor pricing, drop-in family alternatives, and practical design notes not found in the manufacturer datasheet, with verified data as of 2026-09-22.

询价联系我们

DSPIC33CK128MP202T-I/SS

DSPIC33CK128MP202T-I/SS - 100MHz 16-bit DSC 128KB Flash | Microchip

The Microchip Technology DSPIC33CK128MP202T-I/SS is a 16-bit digital signal controller (DSC) with a 100 MHz dsPIC33CK core, 128 KB of program Flash with ECC and dual-partition live update, and a 28-pin SSOP surface-mount package. A digital signal controller combines the computational power of a DSP with the peripheral integration and ease of use of a microcontroller. Within the power management IC hierarchy, the dsPIC33CK family sits between general-purpose MCUs and dedicated digital power controllers, offering deterministic single-cycle MAC and DSP instructions. Modified Harvard architecture with independent program and data buses enables concurrent instruction fetch and data access at full 100 MIPS throughput. Key features include operation from a 3.0V to 3.6V supply across -40C to +125C (industrial, denoted by the I suffix), high-resolution PWM generators suited to digital power converters, and Functional Safety (FuSa) support per DigiKey categorization. The dual-partition Flash with live update allows firmware updates without external storage, and Data SRAM with Memory Built-In Self-Test (MBIST) supports safety-oriented designs. The 28-pin SSOP (0.65 mm pitch) package integrates DSP engine, DMA, and serial peripherals (UART, SPI, I2C) into a compact footprint, making the device suitable where board area is constrained. Typical applications include digital power supplies (LLC, totem-pole PFC), brushless DC and PMSM motor control, and advanced sensing in industrial systems. The 100 MHz core executes control loops at switching frequencies beyond 500 kHz. Design consideration: the 3.0V to 3.6V operating window requires a well-regulated 3.3V rail; decouple all VDD/VSS pin pairs with 0.1 uF ceramics placed within 2 mm of the pins. This page synthesizes distributor pricing, drop-in alternatives, and design notes not consolidated in the manufacturer datasheet.

询价联系我们

DSPIC33CK128MP203-E/M5

DSPIC33CK128MP203-E/M5 - 100MHz 16-Bit DSC | Microchip

The Microchip Technology DSPIC33CK128MP203-E/M5 is a 16-bit digital signal controller (DSC) with a 100 MHz dsPIC33CK core, 128 KB of program Flash with ECC and dual-partition live update, and 16 KB of data SRAM, housed in a 36-pin UQFN (5x5 mm) exposed-pad package. It operates from a 3.0V to 3.6V supply across the extended -40C to +150C temperature range and is AEC-Q100 qualified for automotive applications. A digital signal controller combines the computational throughput of a DSP with the peripheral integration and deterministic control of a microcontroller. Within the power management hierarchy, the dsPIC33CK family sits at the top of Microchip's single-core 16-bit DSC line, targeting closed-loop control systems where fast interrupt response and specialized control peripherals (PWM, ADC, comparators, op-amps) execute loops at switching frequencies of hundreds of kilohertz. Key features include a modified Harvard architecture executing up to 100 MIPS, dual-partition Flash with ECC and live update for field firmware upgrades without downtime, Memory Built-In Self-Test (MBIST) for functional-safety designs, and Peripheral Trigger Generator (PTG) for hardware-sequenced operation. The integrated analog suite includes 3 operational amplifiers and 3 analog comparators, reducing external component count in power conversion stages. The 36-pin device pairs its high-resolution PWM and CAN Flexible Data (CAN FD) module with a 12-bit high-speed ADC pipeline suited to peak current-mode control of buck, boost, LLC, and totem-pole PFC converters. The on-chip op-amps can be configured as inverting or non-inverting gain stages feeding the ADC directly, enabling single-shunt or multi-shunt motor phase current sensing with minimal board area. Typical applications include digital switched-mode power supplies, BLDC and PMSM motor control, automotive power conversion modules, and industrial sensing and control nodes that require a CAN FD interface. The extended temperature grade makes it suitable for under-hood and high-power-density environments. Design consideration: the 3.0V to 3.6V operating window means the 5V rails common in industrial systems require a local LDO or buck regulator; also budget the exposed pad as the primary ground and thermal path for best high-frequency performance. This page synthesizes verified distributor pricing, drop-in family alternatives, and practical design notes not found in the manufacturer datasheet alone.

询价联系我们

子分类

产品（39,000+)

DSPIC33CK128MC106-I/PT - 16-bit DSC 128KB Flash 64-TQFP | Microchip

DSPIC33CK128MC106T-I/MR - 16-bit DSC 100MHz 128KB 64-QFN | Microchip

DSPIC33CK128MC106T-I/PT - 16-bit DSC, 100MHz, 128KB Flash | Microchip

DSPIC33CK128MC502-I/2N - 100MHz DSC 128KB Flash UQFN-28 | Microchip

DSPIC33CK128MC502-I/SS - 16-bit 100MHz DSC, CAN FD | Microchip

DSPIC33CK128MC502T-I/2N - 100MHz 16-bit DSC 128KB Flash | Microchip

DSPIC33CK128MC502T-I/SS - 100MHz 16-bit DSC 128KB Flash | Microchip

DSPIC33CK128MC503-E/M5 - 16-bit 100MHz DSC, 128KB Flash | Microchip

DSPIC33CK128MC503T-I/M5 - 16-bit DSC 128KB Flash CAN FD | Microchip

DSPIC33CK128MC505-E/M7 - 100MHz DSC 128KB Flash 48-VQFN | Microchip

DSPIC33CK128MC505-E/PT - 100MHz 16-bit DSC CAN FD | Microchip

DSPIC33CK128MC505-I/PT - 100MHz 16-bit DSC, CAN FD | Microchip

DSPIC33CK128MC505T-I/M7 - 100MHz 16-bit DSC, CAN FD | Microchip

DSPIC33CK128MC505T-I/PT - 100MHz DSC, 128KB Flash | Microchip

DSPIC33CK128MC506-E/MR - 16-bit 100MHz DSC CAN FD | Microchip

DSPIC33CK128MC506-E/PT - 100MHz 16-bit DSC, 128KB Flash | Microchip

DSPIC33CK128MC506-I/PT - 16-bit DSC 128KB Flash CAN FD | Microchip

DSPIC33CK128MC506T-I/MR - 16-bit DSC, 128KB Flash, CAN FD | Microchip

DSPIC33CK128MC506T-I/PT - 100MHz 128KB DSC | Microchip | Motor Control

DSPIC33CK128MP202-E/SS - 100MHz 16-bit DSC 128KB Flash | Microchip

DSPIC33CK128MP202-I/2N - 100MHz 128KB DSC, CAN FD | Microchip

DSPIC33CK128MP202T-I/2N - 100MHz DSC, 128KB Flash | Microchip

DSPIC33CK128MP202T-I/SS - 100MHz 16-bit DSC 128KB Flash | Microchip

DSPIC33CK128MP203-E/M5 - 100MHz 16-Bit DSC | Microchip