集成电路

5M160ZT100I5

5M160ZT100I5 - MAX V CPLD, 160 LE, TQFP-100, Industrial | Intel / Altera

The Intel / Altera 5M160ZT100I5 is a low-power, non-volatile MAX V Complex Programmable Logic Device (CPLD) with 160 Logic Elements (LE) housed in a 100-pin TQFP (TFQFP) package, targeting industrial temperature (-40C to +100C) applications. The device integrates 128 macro cells, a maximum internal operating frequency of 118.3 MHz, and a 1.8 V core supply with user I/O bank support from 1.2 V to 3.3 V. It delivers instant-on, flash-based configuration with no external boot PROM required. A Complex Programmable Logic Device (CPLD) is a non-volatile, flash-based programmable logic IC that sits between simple PAL/GAL arrays and higher-density FPGAs in the programmable logic taxonomy (CPLD -> PLD -> programmable logic -> digital IC -> semiconductor). MAX V CPLDs are widely used as control-path glue logic, bus interface bridges, and power-sequencing controllers because they combine predictable timing with zero-configuration boot time, in contrast to SRAM-based FPGAs that require external boot devices and incur long POR delays. Key differentiating features of the 5M160ZT100I5 include 8 Kbits of user flash memory, a MultiVolt I/O interface supporting 1.2 V through 3.3 V signaling on the same die, an in-system programmability (ISP) via JTAG, and an integrated voltage regulator that accepts a single 1.8 V core supply. The internal 8-bit parallel flash block provides space for user-defined parameters, lookup tables, or serial numbers, eliminating an external EEPROM in many designs. Power consumption is typically under 30 mA active and below 1 mA in standby, making the part suitable for power-constrained or battery-backed industrial modules. Architecturally, the 5M160ZT100I5 uses Altera's classic Lab/Logic Array Block (LAB) fabric of 16-macrocell groups feeding a global interconnect matrix. Each macrocell contains a programmable flip-flop with multiple clock options, product-term logic, and a register-bypass path for pure combinatorial use. The MultiVolt core and I/O isolation permit mixed-voltage bus interfacing (e.g., 1.8 V core to 3.3 V peripheral) on a single device. Typical applications include industrial control boards (I/O expansion, glue logic between microcontrollers and ASICS), communications equipment (address decoding, bus arbitration, power-sequencing state machines), test and measurement front ends (timing-critical handshakes, custom parallel interfaces), and legacy system replacements for aging discrete TTL/CMOS logic arrays. The instant-on flash architecture also fits automotive and aerospace subsystem controllers where deterministic boot latency is required. When designing with the 5M160ZT100I5, observe the recommended decoupling scheme of 0.1 uF ceramic capacitors adjacent to every supply pin and a 10 uF bulk capacitor on the VCCINT rail, and respect the 100-pin TQFP thermal envelope by providing a minimum 4-layer PCB with continuous inner ground pour. Engineers should also budget for Quartus II (or modern Quartus Prime) for synthesis and programming, and consider the MAX V device family user guide for detailed JTAG chain and ISP implementation guidance.

USD $8.75 有现货

5M160ZT100I5N

5M160ZT100I5N - MAX V CPLD, 128 Macro, 100-TQFP | Intel

The Intel (formerly Altera) 5M160ZT100I5N is a MAX V family Complex Programmable Logic Device (CPLD) with 128 macro cells, 79 user I/Os, and a 7.5 ns pin-to-pin logic delay, housed in a 100-pin TQFP package with 1.8 V core operation and 118.3 MHz maximum internal frequency. A CPLD (Complex Programmable Logic Device) is a non-volatile programmable logic device that sits in the broader hierarchy of digital logic ICs (programmable logic -> logic IC -> integrated circuit -> semiconductor). Unlike FPGAs, CPLDs use flash-backed EEPROM configuration cells and deterministic routing, giving them instant-on behavior, predictable timing, and high pin-to-pin performance. They are typically used as glue logic, bus bridges, I/O expanders, and power-up sequencers, complementing ASICs, ASSPs, and FPGAs in mixed-technology designs. Key features include 160 Logic Elements (LEs), 128 macro cells, 8 Kbits of user flash memory, 1.8 V core voltage with multi-voltage I/O support (1.2 V to 3.3 V LVCMOS/LVTTL), in-system programmability via JTAG (IEEE 1149.1), and an industrial temperature range of -40 °C to +100 °C. The MAX V architecture combines a low-power process with non-volatile configuration, eliminating the need for external boot memory. The device implements the classic MAX architecture with a Logic Array Block (LAB) structure, Product Term (PT) logic, and a continuous interconnect matrix. Each macro cell contains a programmable AND/OR array followed by a flip-flop, with fast carry chains for arithmetic and dedicated JTAG pins (TMS, TDI, TDO, TCK) for boundary-scan testing. Per the manufacturer datasheet, JTAG pins reside in Bank 1 and their I/O standard is controlled by the VCCIO1 setting. Typical applications include industrial control and I/O expansion, glue logic for FPGA/ASIC designs, power-sequencing controllers, bus-interface bridges (e.g., I²C to SPI, parallel to serial), consumer electronics, LED display drivers, and automotive infotainment subsystems. The instant-on non-volatile configuration makes it ideal as a companion boot-logic device to FPGAs. When designing with this part, observe the I/O bank voltage constraints, place decoupling capacitors near every VCCINT and VCCIO pin, and use the Quartus II / Quartus Prime design software for fitting, simulation, and JTAG programming. The 100-pin TQFP variant (suffix T100) provides the broadest I/O count in the 5M160Z family; smaller packages (M68, E64) trade I/O count for board area. This page synthesizes distributor pricing across DigiKey, Mouser, Arrow, Octopart, and Heisener, drop-in alternatives from the same MAX V family, and practical design notes not found in the manufacturer datasheet alone.

USD $4.10 有现货

5M2210ZF256A5N

5M2210ZF256A5N - Intel MAX V CPLD, 1700 MC | FBGA

The Intel (formerly Altera) 5M2210ZF256A5N is a non-volatile MAX V CPLD with 1,700 macrocells, 203 user I/O signals, a 201.1 MHz maximum internal frequency, and an 11.2 ns propagation delay in a 256-ball FBGA (F256) package. It is a 1.8 V, flash-programmable complex programmable logic device built for instant-on control logic, and the fetched automotive/intel product data lists operation from -40 C to +105 C, with JTAG boundary scan and in-system programming support. A CPLD, or complex programmable logic device, is a programmable logic IC that uses non-volatile flash or EEPROM cells to implement combinational and sequential logic without an external configuration memory. In the programmable logic hierarchy, a CPLD sits between simple SPLDs and larger FPGA devices; MAX V is Intel's low-cost, low-power CPLD family commonly used for boot control, bus bridging, and custom glue logic. This hierarchy matters because the 5M2210ZF256A5N can replace multiple discrete 74-series logic devices while preserving deterministic timing and immediate operation at power-up. The headline features are 1,700 macrocells, 203 usable I/O pins in a 256-ball grid array, and a Flash architecture that removes the need for external configuration PROMs. The 1.8 V core helps reduce dynamic power in always-on modules, while in-system JTAG programming and boundary scan simplify board test and field updates. The A5N suffix indicates an automotive-temperature grade variant with a speed-grade bin selected for this F256 package. Architecturally, this device uses CPLD macrocells in a logic-array fabric, providing predictable pin-to-pin delays compared to lookup-table based FPGAs. Because configuration is stored in Flash, the 5M2210ZF256A5N starts operation immediately when power is applied and does not require a configuration bitstream at system boot. The square 256-ball FBGA package with 1.000 mm terminal pitch balances I/O density with two-layer and multi-layer PCB manufacturability. Typical applications include automotive body and chassis modules, industrial PLC I/O and safety interlocks, communication equipment power sequencing, and control-plane glue logic in medical or IoT systems. The automotive suffix and 203 I/O pins allow parallel connection to switch banks, transceivers, status LEDs and bus-interface signals without additional CPLD resources. When laying out a board, define the JTAG chain early and place clean 1.8 V decoupling capacitors near the ball-field corners. Because FBGA pin escape is dense, route critical configuration and reset signals on the top layer when practical and confirm the N lead-free finish with the local distributor. This page adds distributor pricing, pin-compatible package variants, and practical design notes to the publicly available datasheet data, giving engineers a procurement and design reference that a single distributor listing cannot offer.

USD $20.90 有现货

5M2210ZF256C4N

5M2210ZF256C4N - MAX V CPLD, 1700 LE, FBGA-256, C4 Speed | Intel / Altera

The Intel / Altera (formerly Altera) 5M2210ZF256C4N is a member of the MAX V family of low-power, non-volatile Complex Programmable Logic Devices (CPLDs) offering 1700 Logic Elements (LEs), 8192 bits of user flash memory, and 212 Kbits of internal RAM, housed in a 256-ball FineLine BGA package with commercial operating temperature (0C to 85C). The 'C4N' suffix denotes the commercial speed grade 4 with no-lead Pb-free ball finish, while 'ZF256' identifies the 256-ball FBGA package outline. The '5M2210Z' root part number corresponds to the 2210 LE-class MAX V device with 0.30 um 6-metal-layer CMOS flash process technology. A CPLD (Complex Programmable Logic Device) is a non-volatile programmable logic device that sits between simple SPLDs/GALs and higher-density FPGAs in the programmable logic hierarchy (CPLD -> PLD -> programmable logic -> digital IC). MAX V CPLDs are built on a 0.30 um 6-metal-layer CMOS process with a flash-based configuration cell, providing instant-on operation in less than 1 ms without an external boot PROM. They are used as glue logic, I/O expansion, interface bridging, and power-sequencing controllers in industrial, communications, and consumer systems. Unlike SRAM-based FPGAs that require external configuration memory, MAX V devices self-configure at power-up from internal flash. Key features of the 5M2210ZF256C4N include 1700 LEs arranged in 221 Logic Array Blocks (LABs), 160 user I/O pins available in this FBGA-256 outline, a 1.8 V core supply (VCCINT) with multi-voltage I/O bank support (1.5 V, 1.8 V, 2.5 V, 3.3 V LVCMOS/LVTTL), and an internal oscillator plus JTAG (IEEE 1149.1) and IEEE 1532 in-system programmability. Typical tPD pin-to-pin delay is in the 4 ns class for speed grade 4, suitable for control-path rather than high-speed datapath applications. The device supports live insertion and 5 V tolerant I/O when the bank VCCIO is set below 3.3 V. The device integrates the JTAG controller, internal voltage regulator, and configuration flash memory on-die, eliminating the external programming PROM required by legacy MAX and MAX II CPLDs. It also provides four user I/O banks for flexible mixed-voltage interfacing, allowing direct connection to 1.5 V, 1.8 V, 2.5 V, and 3.3 V logic without external level shifters. Typical applications include bus interface bridging (e.g. PCI to local bus), I/O expansion for microcontrollers and ASICs, power-supply sequencing in multi-rail systems, configuration/control for companion FPGAs, and glue logic in industrial controllers and consumer set-top boxes. The FBGA-256 package and high I/O count make it suitable for high-density board-level integration. When designing with this part, route all four VCCIO bank supplies and at least one VCCINT (1.8 V) supply with adequate decoupling (0.1 uF + bulk); unused I/O pins should be left floating or driven to a defined logic level to minimize in-rush during power-up. The 256-ball FBGA requires X-ray or BGA rework equipment for prototype bring-up, so allocate 2-3 days for first-article assembly. This page synthesizes distributor pricing, drop-in MAX V family alternatives, BGA-256 pinout, and recommended design patterns not found in the bare manufacturer datasheet.

USD $7.29 有现货

5M2210ZF256C5N

5M2210ZF256C5N - MAX V CPLD 1700MC 201MHz 256-FBGA | Intel

The Intel (formerly Altera) 5M2210ZF256C5N is a 1.8V MAX V family Complex Programmable Logic Device (CPLD) delivering 2,210 logic elements, 1,700 macrocells, and 203 user I/Os in a 256-ball FineLine BGA (FBGA) package with commercial 0C to 85C temperature grade and lead-free RoHS-compliant assembly. The device supports a maximum internal operating frequency of 201.1 MHz and a typical pin-to-pin propagation delay of 7 ns at speed grade 5. A CPLD, or Complex Programmable Logic Device, is a non-volatile programmable logic component that sits between discrete glue logic and larger FPGAs in the programmable logic hierarchy. CPLDs provide instant-on operation, dense I/O, low static power, and secure flash-based configuration, making them ideal for bus interfacing, address decoding, control state machines, and power-up logic. The MAX V family is Intel/Altera's mainstream low-power CPLD line, fabricated on a 0.30 um flash process and positioned beneath the Cyclone FPGA family in the company's programmable logic portfolio. Key features of the 5M2210ZF256C5N include 1.8V core supply, 203 user I/O pins across 8 I/O banks, 1,700 macrocells distributed across 4 logic array blocks, and flash-based in-system programmability via JTAG (IEEE 1149.1). The device integrates 8 Kbits of user flash memory and supports LVCMOS, LVTTL, SSTL, and HSTL I/O standards. The N suffix denotes lead-free finish and RoHS-compliant assembly suitable for high-volume manufacturing, while the C5 suffix indicates commercial temperature range and speed grade 5 (the fastest commercial speed grade in MAX V). Architecturally, the MAX V family combines a logic array of product-term macrocells with a non-volatile flash configuration memory, eliminating the need for an external boot PROM. The 256-ball FBGA package offers high pin density and an exposed die paddle for thermal dissipation, with a typical theta_JA of approximately 18 C/W when properly soldered to a 4-layer PCB with thermal vias. Typical applications for the 5M2210ZF256C5N include industrial control and automation boards, communication infrastructure glue logic, automotive body and infotainment electronics, display interface bridging, sensor aggregation hubs, and general-purpose I/O expansion in FPGA-based systems. Its high I/O count and 7 ns propagation delay enable it to bridge multiple asynchronous logic domains while preserving deterministic timing. When designing with this device, provide separate VCCINT (1.8V core) and VCCIO (1.2V-3.3V I/O) rails with at least 0.1 uF ceramic decoupling on every supply pin. Reserve a 4-wire JTAG header for in-system programming and board bring-up. The 1.0 mm pitch FBGA-256 requires PCB microvia technology (or 0.8 mm pitch design rules) and a minimum 4-layer stack-up for reliable assembly. This page synthesizes distributor pricing, same-brand drop-in alternatives, and practical design notes not found in the manufacturer datasheet, enabling engineers to evaluate the 5M2210ZF256C5N without visiting multiple sources.

USD $11.95 有现货

5M2210ZF256I5

5M2210ZF256I5 - MAX V CPLD, 1700 LE, FBGA-256 | Intel

The Intel 5M2210ZF256I5 is a member of the MAX V family of low-power Complex Programmable Logic Devices (CPLDs) with 1700 logic elements (macro cells), a maximum internal operating frequency of 201.1 MHz, and a 1.8 V core supply, housed in a 256-ball FineLine BGA (FBGA-256) package. It targets glue-logic, I/O expansion, bus-interface bridging, and power-sequencing roles that do not justify an FPGA but still require non-volatile, instant-on programmable logic with high GPIO count. A CPLD (Complex Programmable Logic Device) is a non-volatile programmable logic device that combines multiple PAL-like macro-cell arrays with a central interconnect matrix. In the system hierarchy, a CPLD sits between simple logic gates / PALs (lowest density) and FPGAs (highest density, highest power, volatile SRAM-based configuration). MAX V CPLDs use a flash-backed configuration cell so the device wakes up with its logic already loaded in under 1 ms, which is a critical advantage over SRAM-based FPGAs that need external boot memory. Key features include 1700 macro cells (logical elements), up to 212 user I/O pins (package-dependent), 1.8 V core with multi-voltage I/O support (1.2 V to 3.3 V on banked pins), a built-in flash configuration block, and JTAG (IEEE 1149.1) + in-system programmability via Intel Quartus II / Quartus Prime. The 201.1 MHz fMAX applies to the internal logic-array interconnect and is not the same as I/O toggle rate. The FBGA-256 package provides a 1.0 mm ball pitch and a thermal resistance (θJA) suitable for forced-air industrial environments when the top-of-package airflow is moderate. Typical applications include bus-interface bridging (e.g., parallel-to-LVDS, I2C/SPI glue logic, address decoding and chip-select generation), industrial control (PLC I/O expansion, motor-control signal conditioning), communications infrastructure (line-card glue logic in routers and switches), and consumer/automotive infotainment (display timing, key-scanning, and LED-matrix multiplexing). When designing with the 5M2210ZF256I5, pay attention to I/O bank voltage grouping. Each I/O bank can be powered independently, but mixing 1.5 V and 3.3 V in the same bank is not allowed. Use Intel's online MAX V device handbook and Quartus Prime power estimator early in the design to verify that worst-case I/O current and toggle rates stay within thermal limits of the FBGA-256 substrate.

USD $23.90 有现货

5M2210ZF256I5N

5M2210ZF256I5N - MAX V CPLD, 1700 LEs, 256-FBGA | Altera

The Intel (formerly Altera) 5M2210ZF256I5N is a MAX V family Complex Programmable Logic Device (CPLD) housed in a 256-ball FineLine Ball-Grid Array (FBGA) package with 1700 Logic Elements (LEs), a 7 ns pin-to-pin logic delay, and an industrial operating temperature grade (I, -40C to +100C junction). It belongs to the MAX V low-power CPLD family that integrates non-volatile flash configuration memory and instant-on support in a single chip. A CPLD (Complex Programmable Logic Device) is a non-volatile programmable logic device that combines the deterministic timing and instant-on behavior of PAL/GAL architectures with higher density macro-cell fabric. In the broader taxonomy, CPLDs sit alongside FPGAs (Field Programmable Gate Arrays) within the programmable logic category of digital integrated circuits. MAX V devices specifically target glue-logic, bus-bridging, I/O expansion, and power-sequencing roles, offering a non-volatile alternative to small FPGAs and to discrete MSI/SSI logic. Key features include 1700 logic elements distributed across logic array blocks (LABs), up to 212 user I/O pins routed through multiple I/O banks, 8 Kbits of user flash memory for storing board parameters or revision codes, an internal oscillator, and a JTAG/IEEE 1149.1 boundary-scan interface compliant with IEEE Std 1149.1. The device is built on a 0.18 um embedded-flash CMOS process, which removes the need for an external configuration PROM and reduces board area and BOM cost. Architecturally, MAX V CPLDs use a multi-level non-volatile switch matrix that holds configuration even when powered down, providing instant-on operation in under 1 ms after a valid VCC ramp. Each I/O pin supports programmable slew rate, bus-hold, weak pull-up resistors, and programmable drive strength, and each pin can be configured for 3.3 V, 2.5 V, 1.8 V, or 1.5 V LVCMOS/LVTTL signaling, with per-bank VCCIO rails enabling mixed-voltage interfacing. Typical applications include I/O expansion and level shifting in industrial control boards, bus bridging between legacy microcontrollers and modern SoCs, power-up and power-down sequencing for multi-rail processor boards, JTAG-controlled board-test infrastructure, and LED or seven-segment display driving in consumer and medical instruments. The wide industrial temperature range and instant-on behavior also suit automotive body-electronics modules and white-goods appliances. When designing with this part, carefully review the Quartus II / Quartus Prime pin assignment tool output and respect each I/O bank's VCCIO supply range - mixing voltage standards in a single bank without a common reference is a common source of input-current latch-up. Always provide a clean, monotonic VCC ramp to guarantee correct flash-based configuration at startup. This page synthesizes distributor pricing, same-family drop-in variants, and practical design notes that are not collected in any single manufacturer datasheet.

USD $17.50 有现货

5M2210ZF324A5N

5M2210ZF324A5N - 1700-Macrocell CPLD, 1.8V, 324-BGA | Intel

The Intel 5M2210ZF324A5N is a 1700-macrocell member of the MAX V family of Complex Programmable Logic Devices (CPLDs), housed in a 324-ball FineLine BGA package and rated for automotive, AEC-Q100 Grade 3 (-40C to +125C) operation. Built on a non-volatile Flash process, the device integrates up to 271 user I/Os, 1.7 K logic elements, and 1.8 V core with MultiVolt-tolerant I/O supporting 1.5 V, 1.8 V, 2.5 V, and 3.3 V interfaces in a single chip. Maximum internal operating frequency is 201.1 MHz with typical quiescent current of 2 mA. What is a CPLD? A Complex Programmable Logic Device is a non-volatile, instantly-on programmable logic IC that implements glue logic, bus decoding, state-machine control, and interface bridging between disparate voltage domains. In the broader taxonomy, the 5M2210ZF324A5N sits as: CPLD -> programmable logic -> programmable logic IC -> logic semiconductor. CPLDs differ from SRAM-based FPGAs by retaining configuration in on-chip Flash, eliminating external boot memory and delivering deterministic power-on timing in the low microsecond range - critical for automotive power-on sequencing and industrial safety paths. Key differentiating features include 8 Kbits of user Flash memory, JTAG (IEEE 1149.1) and in-system programmability via the built-in JTAG interface, and built-in support for hot-socketing with I/O tri-state during power-up/down. The 5M2210ZF324A5N provides 2210 typical logic elements with low standby power, making it well suited for power-sensitive automotive ECUs. Architecturally, the MAX V family uses a classic Logic Array Block (LAB) structure with 16 macrocells per LAB, a global interconnect network, and per-pin output enable registers. The Flash-based configuration cell makes the device instant-on and immune to configuration memory corruption - a key differentiator versus SRAM FPGAs in safety-critical applications. Typical applications include automotive body-electronics modules, infotainment I/O expansion, industrial motor-control glue logic, PCIe/PCI bridging, and any design that needs fast deterministic logic with non-volatile storage. The 324-pin BGA also suits space-constrained designs that demand high I/O count in a small footprint. Designers should plan power sequencing for the 1.8 V core supply, observe BGA soldering profile (JEDEC J-STD-020 moisture sensitivity level 3), and reserve JTAG pins for in-system programming. Quartus II Web Edition or Intel Quartus Prime Lite supports the device for design entry and timing closure. This page synthesizes distributor inventory, drop-in same-package alternatives drawn from the Intel MAX V family, and practical design notes that go beyond the datasheet's device description, giving procurement and engineering teams a single source for evaluation and sourcing.

USD $44.25 有现货

5M2210ZF324C4N

5M2210ZF324C4N - MAX V CPLD, 1700 Macrocells, FBGA-324 | Intel / Altera

The Intel / Altera (formerly Altera) 5M2210ZF324C4N is a MAX V family Complex Programmable Logic Device (CPLD) delivering 1700 macrocells, 221 logic array blocks (LABs), and 271 user I/Os in a 324-ball FineLine BGA (FBGA-324) package. Built on a 1.8 V core with non-volatile flash configuration memory, this device is a member of the lowest-power, non-volatile CPLD family in the industry and is targeted at glue-logic, bus-bridging, and I/O-expansion applications. The C4 speed grade delivers a 7.0 ns pin-to-pin propagation delay and an internal operating frequency up to 304 MHz (typical fMAX ~247.5 MHz). A CPLD (Complex Programmable Logic Device) is a non-volatile programmable logic device containing multiple PAL-like macrocell blocks interconnected by a central switch matrix. Unlike FPGAs, CPLDs use non-volatile flash configuration, deterministic 7 ns timing, and instant-on behavior with no external boot memory. CPLDs belong to the broader hierarchy: programmable logic -> logic IC -> integrated circuit, and they typically sit between discrete glue logic and FPGAs in cost/density/performance. Key features of the 5M2210ZF324C4N include 1700 macrocells, 221 LABs, 271 user I/Os, MultiVolt core I/O supporting 1.2 V to 3.3 V interfaces, in-system programmability via JTAG, and a commercial operating temperature grade (0C to +85C). The device integrates a JTAG-compliant IEEE 1149.1 boundary-scan test interface and supports the Altera Quartus II / Quartus Prime design suite for synthesis, place-and-route, and programming file generation. MultiVolt I/O banks allow direct interfacing to 1.5 V, 1.8 V, 2.5 V, and 3.3 V logic without level shifters, reducing board complexity. The MAX V architecture uses a low-power, flash-based process that eliminates the external configuration PROM required by SRAM FPGAs and provides instant-on logic operation at power-up. Each LAB contains 16 macrocells, and the central switch matrix routes signals between LABs and I/O pins with predictable timing that simplifies static timing closure. Typical applications include bus bridging (e.g., PCI to local bus), I/O expansion and voltage translation, power-up sequencing logic, board-level glue logic replacing discrete 74-series gates, LED display control, and industrial control logic. The instant-on, non-volatile nature of MAX V makes it particularly attractive in industrial and automotive subsystems that require deterministic behavior at power-on. Designers should budget for a 1.8 V core supply with proper decoupling (100 nF + 10 uF per supply pin group), use MultiVolt bank VCCIO pins to match each interface voltage, and follow Altera's FBGA-324 PCB layout guidelines for signal integrity. The JTAG chain should include TMS, TDI, TDO, TCK plus optional TRST, and unused pins can be configured as 3-state outputs or driven per Quartus defaults. This page synthesizes distributor pricing, drop-in same-package alternatives from the MAX V family, and practical design notes not found in the manufacturer datasheet alone.

USD $22.45 有现货

5M2210ZF324C5N

5M2210ZF324C5N - MAX V 1700-LE CPLD 324-FBGA | Intel / Altera

The Intel / Altera 5M2210ZF324C5N is a member of the MAX V family of low-power, non-volatile Complex Programmable Logic Devices (CPLDs), offering 1700 Logic Elements (LEs), 271 user I/Os, and a maximum propagation delay of 7.0 ns housed in a 324-ball FineLine BGA (FBGA) package. The "C5" speed grade and "N" lead-free designation place it in the commercial temperature range with 0C to +85C operation, while the "F324" suffix denotes the FBGA-324 pinout. Pricing begins at approximately $11.36 per unit at LCSC, as of 2026-09-06. A CPLD (Complex Programmable Logic Device) is a non-volatile, instant-on programmable logic device that occupies the architectural niche between small FPGAs and discrete glue-logic ICs. Internally it is built from multiple Logic Array Blocks (LABs) interconnected by a programmable switch matrix; MAX V specifically uses a low-power 0.18-micron process with 1.8 V core voltage and supports MultiVolt I/O banks (1.2 V to 3.3 V) driven from a separate VCCIO rail. Because configuration is stored in on-chip flash, MAX V devices power up to a working state in well under 1 ms with no external boot PROM. Key features of the 5M2210ZF324C5N include 1.7 K logic elements distributed across 221 LAB-equivalent macrocells (MAX V's macro count), 4096 bits of user flash memory, 8 Kbits of RAM, support for LVCMOS, LVTTL, SSTL, HSTL, and PCI (on JTAG pins only) I/O standards, and an internal oscillator plus user flash that simplifies designs needing on-board NVM. The 324-ball FBGA package delivers high I/O density for board-constrained applications while exposing 16 dedicated inputs, 4 JTAG pins (TDI/TDO/TMS/TCK), and 2 global clock networks. Architecturally, MAX V uses a unified flash+SRAM shadow architecture so every I/O pin can be configured as input, output, bidirectional, or open-drain, and every macrocell can implement combinatorial or registered logic with selectable D/T/JK/SR flip-flops. The device includes 4 global clocks plus a 100 MHz internal oscillator, and the flash-backed user memory can store system parameters that survive power cycles without external EEPROM. Typical applications include I/O expansion and voltage-level translation for microcontrollers and ASSPs, bus interface bridging (for example UART/SPI/I2C muxing), power-sequencer logic for multi-rail designs, glue-logic replacement for 74-series ICs, LED and display driving, and consumer-industrial control boards where instant-on, low quiescent current (under 100 uA typical), and zero external configuration components are decisive advantages. When designing, plan for a 1.8 V core supply and a separate 1.2-3.3 V VCCIO bank supply, keep JTAG TMS/TDI/TDO/TCK lengths matched within 25 mm, and place the 100 nF core/VCCIO decoupling network within 3 mm of the balls. The FBGA package requires ENIG surface finish and 0.4 mm-pitch PCB routing with microvia stackups. This page synthesizes distributor pricing across DigiKey, Mouser, and LCSC, parametric drop-in alternatives within the MAX V family and equivalent Lattice devices, and practical PCB design notes not found in the manufacturer datasheet.

USD $8.40 有现货

5M2210ZF324I5

5M2210ZF324I5 - 1700-Macrocell MAX V CPLD, 1.8V, 324-BGA | Intel

The Intel 5M2210ZF324I5 is a member of the MAX V family of Complex Programmable Logic Devices (CPLDs), offering 1700 macrocells and 324 ball-grid-array pins in a surface-mount LBGA package. It is built on a low-power, non-volatile Flash process that provides instant-on capability with zero standby current for in-system programming, supports a 1.8V core supply, and is rated for industrial temperature operation (-40C to +100C). A CPLD (Complex Programmable Logic Device) is a non-volatile programmable logic device that combines multiple PAL-like macrocell blocks with a programmable interconnect matrix. In the modern component hierarchy it sits alongside FPGAs in the programmable-logic category, but it is distinct from FPGAs in three practical ways: (1) non-volatile configuration that powers up instantly, (2) deterministic propagation delay typically measured in nanoseconds rather than tens of nanoseconds, and (3) lower logic density at lower cost and power. MAX V CPLDs are commonly used as glue logic, bus bridges, and interface controllers in industrial, automotive, telecom, and consumer systems. Key features of the 5M2210ZF324I5 include 1700 macrocells, 2210 logic elements-equivalent, 324 user I/O balls organized as a fine-pitch BGA, and 7 ns pin-to-pin logic delay. The device integrates 8 Kbits of user flash memory and supports in-system programmability through JTAG. Designers can place the device between a processor and peripheral bus, where its deterministic timing simplifies protocol decoding and its non-volatile boot avoids FPGA-style configuration memory on the board. Architecturally, the MAX V family uses a multi-volt I/O architecture that allows each bank to operate independently at 1.2V, 1.5V, 1.8V, 2.5V, or 3.3V, which simplifies bridging between modern low-voltage processors and legacy 3.3V peripherals. The Flash-based configuration cell eliminates the external configuration PROM that older CPLDs required, reducing board area and BOM cost. Typical applications include I/O expansion and voltage translation for industrial controllers, glue logic for ASIC/FPGA designs, bus decoding in telecom backplane equipment, and power-up sequencing in multi-rail systems. Designers also use the 5M2210ZF324I5 as a low-cost state-machine engine in motor-control and HMI modules where instant-on behavior is required. When designing with the 5M2210ZF324I5, verify that the PCB footprint accommodates the 1.0 mm pitch 324-ball LBGA layout and that the JTAG chain is accessible for in-system programming. Because the part shares its family with several pin-compatible speed-grade and temperature variants, designers can scale logic capacity without redesigning the PCB. This page synthesizes distributor pricing, drop-in alternatives from the same MAX V family, and practical design notes not found in the manufacturer datasheet.

USD $23.85 有现货

5M2210ZF324I5N

5M2210ZF324I5N - 2210 LE MAX V CPLD, 324-ball FBGA | Intel

The Intel 5M2210ZF324I5N is a low-power, non-volatile Complex Programmable Logic Device (CPLD) from the MAX V family, housed in a 324-ball FineLine Ball-Grid Array (FBGA) package. It integrates 2210 logic elements (LEs), 172 Kbits of embedded user flash memory, and a 1.8 V internal core supply (VCCINT) with multi-voltage I/O support at 1.2 V, 1.5 V, 1.8 V, 2.5 V, and 3.3 V, allowing direct interfacing to legacy and modern logic families without external level shifters. What is a CPLD? A Complex Programmable Logic Device is a non-volatile programmable logic device that combines the instant-on characteristics of small PAL/GAL architectures with the higher logic density and I/O count of an FPGA-like fabric. In the broader system hierarchy, a CPLD sits below an FPGA in density but above discrete 74-series glue logic, and is most commonly used for I/O expansion, bus bridging, power-sequencing logic, and control-plane state machines in industrial, communications, and consumer designs. The MAX V family specifically targets low standby power (down to 25 uA typical) and instant-on operation after power-up. Key features of the 5M2210ZF324I5N include 2210 LEs, up to 272 user I/O pins, 172 Kbits of user flash, internal oscillator support, JTAG and ISP programming, hot-socketing tolerance, and a commercial-to-industrial operating temperature range up to +100 C junction. The device is built on a 1.8 V core process with multi-voltage I/O banks that support LVCMOS, LVTTL, and LVDS-style signaling on the same die, eliminating the need for external level translation. The 324-ball FBGA package offers high board-density routing with the supply/ground pin distribution needed for low-EMI operation in noise-sensitive control loops. Architecturally, the MAX V CPLD uses a non-volatile flash-based Look-Up Table (LUT) array combined with a global routing fabric, providing instant-on behavior (sub-1 ms configuration) and infinite in-system reprogrammability. The integrated flash eliminates an external boot PROM and reduces total BOM count versus SRAM-based FPGAs that require a configuration memory. JTAG (IEEE 1149.1) and a passive serial configuration port are supported for in-system programming and boundary-scan test. Typical applications include industrial control and I/O expansion modules, telecommunications line cards and backplane glue logic, consumer electronics display and key-scan interfaces, automotive body and infotainment subsystems, and any embedded design that requires low standby power combined with deterministic instant-on behavior. The wide VCCIO range also makes the device a strong fit for mixed-voltage designs that bridge 3.3 V MCUs to 1.8 V ASICs or FPGAs. When designing with this device, pay attention to VCCINT decoupling (1.8 V core) and place a 0.1 uF plus 10 uF capacitor pair close to each supply pin group. Configure unused I/O banks as LVCMOS inputs with internal weak pull-ups to reduce in-rush current at hot insertion. Quartus Prime or the legacy MAX+PLUS II toolchain is used to compile and program the device. This page synthesizes distributor stock and pricing, drop-in same-package alternatives from the Intel MAX V family, and practical design notes that supplement the manufacturer datasheet with curated engineer-friendly context.

USD $5.95 有现货

5M240ZM100A5N

5M240ZM100A5N - MAX V CPLD 192 Macrocells 79 I/O 1.8V | Intel

The Intel (formerly Altera) 5M240ZM100A5N is a member of the MAX V family of low-power, non-volatile Complex Programmable Logic Devices (CPLDs) delivering 192 macrocells, 192 logic array blocks (LABs), and 79 maximum user I/O pins in a 100-ball fine-pitch Micro FBGA (BGA) package. It supports 1.8V core operation and offers up to 184.1 MHz internal performance with flash-based configuration, eliminating the need for external boot memory and enabling instant-on behavior in cost-sensitive designs. The 'A' speed grade and 'N' suffix denote industrial temperature range, lead-free finish, and standard speed bin. A CPLD (Complex Programmable Logic Device) is a non-volatile, flash-programmable logic device that sits between simple glue-logic PAL/GAL devices and higher-density FPGAs in the programmable-logic taxonomy (PAL/GAL -> CPLD -> FPGA -> SoC FPGA). CPLDs are characterized by deterministic, pin-to-pin timing (typically <5 ns propagation delay), non-volatile flash storage, low static current (~25 µA typical for this family), and small form-factor packages, making them ideal for I/O expansion, bus bridging, power-up sequencing, and interface translation. Key features of the 5M240ZM100A5N include 240 logic elements (LE-equivalent density), 8 Kbits of user flash memory, in-system programmability via JTAG, multi-volt I/O support from 1.2V to 3.3V on every pin through independently configured I/O banks, and built-in pull-up resistors that are enabled by default during configuration. The 8 Kbit User Flash block can be partitioned for general-purpose user data storage or to support sequential logic state retention. Architecturally, MAX V devices combine a classic LAB-and-macrocell fabric with a non-volatile flash configuration memory on a single die, eliminating the external configuration PROM required by older CPLD families and by SRAM-based FPGAs. This single-chip, instant-on architecture provides both a reduced BOM and a hardened supply-chain profile, since the configuration image cannot be corrupted by voltage glitches at power-up. MultiVolt core and I/O capability allow direct interfacing to legacy 5V-tolerant and modern 1.2V sub-micron ASICs/ASSPs on the same board. Typical applications for the 5M240ZM100A5N include I/O expansion and level shifting in industrial controllers, glue logic around processors and ASICs in networking line cards, power-up sequencing in multi-rail systems, JTAG-controlled board-level test access, and bus-width adaptation between microcontrollers and parallel peripherals (NAND flash, SRAM, sensors, LCDs). The combination of low power, instant-on non-volatile flash, and compact BGA packaging also suits portable, hand-held, and battery-backed equipment where board area and standby current are at a premium. When designing with this part, observe I/O bank voltage grouping rules so that any 5V-tolerant or 3.3V signals share a bank with the correct VCCIO supply. Decoupling requires 0.1 µF ceramic capacitors placed within 3 mm of every VCCIO/VCCINT ball. Pin assignments should be planned in the Quartus II / Quartus Prime pin planner to avoid excessive fan-out per LAB. This page synthesizes real-time distributor pricing, drop-in same-family alternatives (5M160ZM100A5N, 5M2210ZF256A5N, 5M240ZT100A5N) sourced from the verified cross-reference data, and practical design notes beyond what is summarized in the manufacturer's datasheet.

USD $3.95 有现货

5M240ZM100C4N

5M240ZM100C4N - 192-Macrocell MAX V CPLD | Intel | 100-MBGA

The Intel (formerly Altera) 5M240ZM100C4N is a 192-macrocell member of the MAX V family of low-power Complex Programmable Logic Devices (CPLDs) housed in a 100-ball Micro FBGA package. It operates from a 1.71V to 1.89V core supply (1.8V nominal), delivers a maximum internal operating frequency of approximately 184.1 MHz, and supports commercial-grade junction temperatures from 0C to +85C. A CPLD (Complex Programmable Logic Device) is a non-volatile programmable logic device that combines multiple PLA-style macrocell arrays with a central interconnect matrix. It sits in the broader hierarchy of programmable logic: glue logic -> CPLD -> FPGA -> SoC FPGA, and is typically used for I/O expansion, bus bridging, and power-up control where deterministic, instant-on behavior is required. Unlike SRAM-based FPGAs, MAX V CPLDs store their configuration in on-chip flash, eliminating the need for an external boot PROM and enabling sub-10ms power-on-to-logic-active times. Key features of the 5M240ZM100C4N include 192 logic macrocells, 240 typical logic elements, 4 global clocks, and a low static power budget characteristic of the MAX V family. The device supports in-system programmability via JTAG, integrates a 3.3V/2.5V/1.8V/1.5V tolerant I/O bank interface, and offers user flash memory for storing user-defined parameters that survive across power cycles. The MAX V architecture is built on a low-power CMOS process with a non-volatile flash configuration cell, providing instant-on capability and immunity to configuration memory corruption. The 100-ball MBGA package (8 mm x 8 mm body) is suitable for space-constrained designs and supports surface-mount reflow profiles compatible with lead-free assembly. Typical applications include I/O expansion and level shifting between processors and peripherals, bus bridging between incompatible voltage domains, power-up sequencing logic in multi-rail systems, and glue-logic replacement for discrete TTL/CMOS gates in industrial, consumer, and embedded designs. Designers should note that the 'C4' speed grade corresponds to approximately 7.5 ns pin-to-pin logic delay (tPD), and the 'N' suffix indicates a commercial temperature grade. Always verify pin assignments against the Quartus II / Quartus Prime pinout file before PCB layout. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet alone, helping engineers select, source, and integrate the 5M240ZM100C4N efficiently.

USD $4.62 有现货

5M240ZM100C5N

5M240ZM100C5N - 192 Macrocell MAX V CPLD, 100-MBGA | Intel

The Intel 5M240ZM100C5N is a member of the MAX V family of low-power, non-volatile Complex Programmable Logic Devices (CPLDs), delivering 192 macrocells, 240 logic elements, and 79 user I/Os in a 100-ball FineLine BGA (MBGA) package measuring 6 mm x 6 mm. It is fabricated on a 0.18 µm flash-based process that provides instant-on (less than 1 ms) configuration from on-chip non-volatile memory, eliminating the need for external boot PROMs and simplifying board bring-up. The device operates from a 1.71 V to 1.89 V core supply (VCCINT) and supports 1.2 V to 3.3 V VCCIO banks with multi-voltage I/O capability, making it suitable for bridging 5.0 V-tolerant mixed-signal systems. A CPLD (Complex Programmable Logic Device) is a non-volatile programmable logic device that combines multiple PAL/GAL-like logic blocks (called macrocells) on a single chip with a programmable interconnect fabric. Within the broader taxonomy, a CPLD sits below an FPGA in terms of logic density but above discrete 74-series glue logic: programmable logic device -> CPLD -> MAX V family -> low-density non-volatile CPLD -> power management and interface bridging. MAX V parts are widely used as glue-logic, I/O expander, and power-sequencing controllers that must boot deterministically at power-up without external configuration memory. Key features of the 5M240ZM100C5N include 7.5 ns pin-to-pin logic delay (tPD), 4.7 ns maximum register-to-register (tCO) timing, an internal oscillator, on-chip flash user flash memory, JTAG (IEEE 1149.1) and ISP support, and a MultiVolt core that allows each I/O bank to operate at an independent voltage. The device supports in-system programmability via JTAG, allowing field upgrades without removing the part from the board. The flash-based architecture means the design is retained through power cycles with zero configuration time, which is critical for safety and sequencing applications. Architecturally, the 5M240ZM100C5N contains four Logic Array Blocks (LABs), each with 48 macrocells, interconnected by a low-skew global routing network. The MultiVolt interface, on-chip voltage regulator, and built-in flash memory distinguish MAX V from SRAM-based CPLDs that require external configuration storage. Designers can implement combinational and registered logic, state machines, FIFO controllers, and bus-interface bridges (for example, SPI-to-I2C, I2C-to-parallel, or async SRAM controllers) using Quartus II Web Edition or the newer Quartus Prime Lite toolchain. Typical applications include I/O expansion and voltage-level translation in industrial control, LED display row/column drivers, glue logic in telecom line cards, power-sequencing controllers in server backplanes, and bus-interface bridges in automotive infotainment. The instant-on behavior also makes it attractive for safety-critical boot ROM replacement and deterministic reset distribution. In multi-voltage designs, the 5M240ZM100C5N can be used to bridge a 3.3 V microcontroller to a 1.8 V sensor or DDR memory without external level shifters. When designing with this device, allocate at least one decoupling capacitor pair (0.1 µF X7R plus 10 µF bulk) per VCCINT and VCCIO pin, and follow the Intel MAX V device handbook guidelines for JTAG chain termination. Avoid long parallel signal traces on user I/Os and respect the MultiVolt bank's VCCIO setting before driving outputs above VCCIO. Using the Quartus Prime software's power analyzer is recommended to estimate junction temperature; for production thermal margin, derate at 25 °C/watt on a 4-layer FR-4 board. This page synthesizes distributor pricing, drop-in MAX V alternatives, JTAG programming notes, and PCB-layout guidance not always present in the manufacturer datasheet, providing engineering teams with the practical context required for component selection.

USD $7.40 有现货

5M240ZM100I5N

5M240ZM100I5N - 192 Macro Cell MAX V CPLD 100MBGA | Intel

The Intel (formerly Altera) 5M240ZM100I5N is a low-power, non-volatile CPLD from the MAX V family featuring 192 macro cells, 240 logic elements, and 7.5 ns pin-to-pin logic delay, packaged in a 100-pin Micro FineLine BGA (MBGA) with 1.8 V core operation. The device integrates 8 Kbits of user flash memory and supports in-system programmability via JTAG, providing a single-chip glue-logic solution that replaces multiple discrete 74-series devices on industrial control boards. A Complex Programmable Logic Device (CPLD) is a non-volatile, instant-on programmable logic device that combines the deterministic timing of PAL/GAL architectures with the density of an FPGA, typically used for I/O expansion, bus bridging, power-up sequencing, and interface protocol conversion. The MAX V CPLD family sits within the broader programmable-logic hierarchy: PLD → CPLD → FPGA → SoC FPGA, occupying the low-power, deterministic-timing niche where FPGAs would be over-spec and discrete logic would consume excessive board area. Key features include a 1.8 V core supply with multi-voltage I/O support (1.2 V to 3.3 V LVCMOS/LVTTL), 8 Kbits of embedded user flash, JTAG (IEEE 1149.1) and IEEE 1532 in-system programming, an internal oscillator, and the Quartus Prime design toolchain for schematic, VHDL, and Verilog entry. The Z-suffix speed grade delivers fMAX near 118.3 MHz on internal counters, and the I5 temperature grade supports industrial operation from -40 °C to +100 °C ambient. The architecture uses a classic MAX macro-cell fabric with a unified interconnect, four I/O banks, and a Joint Test Action Group (JTAG) interface. On-chip voltage regulation allows single-rail operation from a 1.8 V supply, and the 8 Kbit user flash block stores customer configuration or constants without an external EEPROM. Typical applications include I/O expansion in industrial PLCs, bus bridges between legacy microcontrollers and modern peripherals, power-up sequencers for multi-rail FPGAs and SoCs, motor-control glue logic in drives and robotics, and glue logic in telecom line cards and test instrumentation. When designing, observe BGA fan-out and via-in-pad rules for the 100-MBGA package, and verify Quartus Prime support for the latest MAX V device files. The internal 1.8 V regulator requires a 0.1 µF bypass within 2 mm of the VCORE ball. This page synthesises distributor pricing, verified drop-in alternatives from the same MAX V family, and practical design notes that go beyond the manufacturer datasheet summary.

USD $9.85 有现货

5M240ZM68A5N

5M240ZM68A5N - MAX V CPLD, 192 Macro Cells, 68-MBGA | Intel

The Intel (formerly Altera) 5M240ZM68A5N is a CMOS Flash-based Complex Programmable Logic Device (CPLD) from the MAX V family, delivering 192 macro cells with 52 user I/Os in a 68-ball MBGA (Micro Ball Grid Array) package. It operates across a 1.71V to 1.89V core supply range with a maximum internal operating frequency of 118.3 MHz and a typical propagation delay of 17.7 ns, providing deterministic logic for glue-logic and I/O-expansion duties. A CPLD (Complex Programmable Logic Device) is a non-volatile programmable logic device that sits in the digital-logic hierarchy between simple PLDs and full FPGAs. It uses a flash-backed AND/OR fabric with macrocell-based logic blocks, delivering instant-on behavior, deterministic timing, and unlimited in-system reprogrammability. Within the broader taxonomy, the MAX V CPLD belongs to the programmable-logic family, which itself is a sub-category of digital ICs alongside ASICs, microcontrollers, and FPGAs. The MAX V family is Intel's low-power, non-volatile CPLD line optimized for cost-sensitive industrial, automotive, and consumer bridging roles. Key features of the 5M240ZM68A5N include an ultra-low standby current of 25 uA, JTAG-based in-system programmability via IEEE 1149.1, support for 1.8V I/O standards, multi-voltage I/O banks for interfacing with 1.5V/1.8V/2.5V/3.3V logic, and a flash configuration memory that eliminates external boot devices. The 68-MBGA package suits space-constrained portable and industrial boards where board real estate is at a premium. Architecturally, the device combines a non-volatile flash fabric with four logic array blocks (LABs) connected through a programmable interconnect array (PIA). This architecture provides predictable pin-to-pin timing, fixed I/O placement, and excellent signal-integrity performance for bus-bridging, power-sequencing, and control-state-machine designs. The MAX V architecture is purpose-built for low-power glue logic where FPGAs would be over-spec and discrete logic would consume too much board area. Typical applications include I/O expansion and voltage translation in industrial controllers, power-sequencing and reset orchestration on multi-rail embedded platforms, LED and motor-control state machines, glue-logic replacement on legacy PCB revisions, and bridge interfaces between microcontrollers and high-speed peripherals. The 25 uA standby current also makes it attractive for battery-powered systems that require non-volatile logic at idle. When designing with this device, ensure the MBGA land pattern uses NSMD (non-solder-mask-defined) pads with proper via-in-pad or tented-via escape routing for reliable reflow. Decoupling requires 100 nF X7R ceramics on each VCCIO/VCCINT pair placed within 50 mils of the ball. The Quartus Prime or Intel Quartus II design environment supports JTAG programming through a USB-Blaster or compatible download cable. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the standalone manufacturer datasheet.

USD $4.78 有现货

5M240ZM68C4N

5M240ZM68C4N - MAX V CPLD 192 Logic Elements 68MBGA | Intel

The Intel 5M240ZM68C4N is a low-power, non-volatile CPLD from the MAX V family, integrating 192 macro cells (240 logic elements) in a 68-ball Micro FBGA package. Operating from a single 1.8 V core supply, the device delivers pin toggle rates up to 184.1 MHz with sub-100 µA standby current, targeting glue-logic, bus-bridging, and power-sequencing functions in cost-sensitive designs. A CPLD (Complex Programmable Logic Device) is a non-volatile programmable logic device that sits between discrete logic gates and FPGAs in the programmable logic hierarchy. Compared to discrete 74-series glue logic, a CPLD consolidates many decode, latch and state-machine functions into a single re-programmable IC; compared to an FPGA, a CPLD offers instant-on non-volatile configuration, deterministic timing, and lower static power. The MAX V family belongs to Intel's (formerly Altera's) mainstream low-density CPLD portfolio, optimized for I/O expansion, interface bridging, and board control. Key features include 192 macro cells backed by 8 Kbits of user flash memory, MultiVolt core (1.8 V) and I/O support for 1.5 V, 1.8 V, 2.5 V, 3.3 V and LVCMOS/LVTTL interfaces, plus an on-chip voltage regulator allowing single-rail operation. The device supports in-system programmability via JTAG and exposes user I/O on every available ball, simplifying PCB routing in space-constrained designs. Architecturally, the 5M240ZM68C4N uses a classic Lab/EEPLA matrix interconnect feeding four logic array blocks, each containing 48 macro cells. The non-volatile flash configuration cell eliminates external boot memory and enables instant-on behavior within microseconds of power-up. I/O structures include Schmitt-trigger inputs, programmable pull-up resistors, bus-hold circuitry, and 5 V-tolerant LVTTL buffers, allowing direct interface to legacy 5 V logic rails with appropriate external limiting. Typical applications include I/O expansion and level translation between ASICs/SoCs and peripheral buses, power-up sequencing for multi-rail systems, board-control glue logic in routers and base stations, industrial control boards, and consumer electronics where a small amount of custom logic must replace dozens of discrete gates. The 68-ball MBGA package suits compact handheld and embedded designs. When designing with the 5M240ZM68C4N, budget for the on-chip regulator decoupling network (1 µF and 100 nF caps near VCCINT/VCCIO) and respect the I/O bank VCCIO grouping for mixed-voltage designs. Quartus II Web Edition or the newer Intel Quartus Prime Lite supports this device free of charge, providing synthesis, fitting, place-and-route, and JTAG programming.

USD $4.20 有现货

5M240ZM68C5N

5M240ZM68C5N - MAX V CPLD, 192 Macro Cells, 68-BGA | Intel

The Intel 5M240ZM68C5N is a member of the MAX V family of low-power Complex Programmable Logic Devices (CPLDs), delivering 192 macro cells and 118.3 MHz maximum operating frequency in a compact 68-pin Micro FBGA (BGA-68) package. It is fabricated on a 1.8 V core process, operates from a 1.71 V to 1.89 V single supply, and is offered in the commercial 0 °C to +85 °C temperature grade. The non-volatile flash-based architecture eliminates the need for external configuration memory, allowing instant-on behavior with zero standby configuration power. A CPLD (Complex Programmable Logic Device) is a non-volatile programmable logic device that sits between simple SPLDs/PLDs and larger FPGAs in the programmable logic hierarchy. The MAX V family occupies the small-density, low-power segment, ideal for glue logic, I/O expansion, bus bridging, and power-up sequencing. Compared with FPGAs, MAX V CPLDs offer deterministic timing, no boot overhead, and lower static current, making them well suited to applications that require predictable response in microseconds rather than milliseconds. Key features include 192 macro cells organized in 4 Logic Array Blocks (LABs), 240 logic elements, 4 global clocks, and an internal flash configuration block. The device supports in-system programmability via JTAG, hot-socket insertion, multiVolt I/O for interfacing with 1.5 V, 1.8 V, 2.5 V, 3.3 V, and 5 V buses, and an integrated user flash memory block for non-volatile user data. The 1.8 V core is paired with flexible I/O banks, simplifying mixed-voltage system design. The MAX V architecture is built on a flash-based process that retains configuration through power cycles and is fully reconfigurable in-circuit. With a typical standby current in the microamp range and support for low-power operation modes, the 5M240ZM68C5N enables power-efficient designs without sacrificing deterministic logic response. The I/O structure supports LVCMOS, LVTTL, PCI, and SSTL standards. Typical applications include I/O expansion and level shifting between mismatched voltage domains, bus interface bridging (e.g., parallel to serial), power-up sequencing and reset distribution, glue logic replacement for discrete 74-series gates, and board-level control state machines. Designers favor MAX V when instant-on behavior and deterministic propagation delay are required at low logic densities. When designing with this device, pay close attention to the 68-ball Micro FBGA fan-out: route all four inner power/ground rings with adequate vias for thermal relief, and reserve JTAG access (TCK, TMS, TDI, TDO) on PCB test points for in-system reprogramming. Use the Quartus Prime design software for fitting, timing closure, and JTAG programming. This page synthesizes distributor pricing, same-package drop-in alternatives, and practical design notes not found in the manufacturer datasheet alone, helping engineers evaluate the 5M240ZM68C5N for both new designs and existing platform refreshes.

USD $9.05 有现货

5M240ZM68I5N

5M240ZM68I5N - 68-Ball Industrial MAX V CPLD | Intel

The Intel 5M240ZM68I5N is a 240-logic-element MAX V family complex programmable logic device (CPLD) supplied in a 68-ball fine-pitch thin-profile BGA (TFBGA) package. The verified distributor data classifies the device as a CPLD with 192 macrocells and a 7.5 ns pin-to-pin delay, with the ordering code identifying an industrial temperature grade and the 5N speed/power option. The MAX V family uses nonvolatile flash configuration memory, so the implemented design is retained after power removal without an external boot PROM. A CPLD, or Complex Programmable Logic Device, is a semiconductor containing multiple configurable logic blocks, a programmable interconnect matrix, and nonvolatile configuration memory. In the programmable device hierarchy, CPLDs sit between small SPLDs and larger FPGAs. They are favored when deterministic timing, fast power-on behavior, and persistent configuration are required for bus decoding, state-machine control, and interface adaptation. MAX V devices are the nonvolatile Altera/Intel programmable logic family that adds mixed-voltage I/O support and on-chip flash for instant-on behavior. Key features of the 5M240ZM68I5N include 240 logic elements, 192 macrocells, 7.5 ns tPD propagation delay, multi-voltage I/O support, and JTAG-based in-system programmability via dedicated TMS, TDI, TDO, and TCK pins assigned to Bank 1. The 68-ball TFBGA package provides dense interconnect with controlled-impedance escape, while the industrial temperature range allows operation from -40C to +100C junction. The flash-based architecture eliminates the need for external configuration memory and supports multi-year retention. The MAX V architecture combines a fast AND-OR PLA fabric with JTAG, IEEE Std 1149.1 boundary scan, and an internal oscillator. Dedicated JTAG pins are routed to Bank 1, so the VCCIO supply of Bank 1 governs the supported I/O standards for TMS, TDI, TDO, and TCK. These pins support the standards listed in the MAX V device documentation except PCI and 1.2 V LVCMOS, which must be observed when designing the JTAG chain. Typical applications include industrial control interfaces, motor-control ancillary logic, communication-equipment glue logic, sensor aggregation, and legacy bus adaptation between otherwise incompatible controllers, memories, and peripherals. The nonvolatile, instant-on behavior also makes MAX V CPLDs well suited to safety-critical boot sequencing and power-up state machines. When designing with the 5M240ZM68I5N, verify the ball map against the 68-pin TFBGA land pattern, supply all VCCINT and VCCIO rails with the required decoupling network, and keep JTAG TCK clean with controlled impedance. Always confirm timing, I/O standard, and Quartus project constraints against the manufacturer datasheet before release to production. This page consolidates the verified distributor classification, package and terminal count, industrial grade, pricing, JTAG bank detail, and drop-in analysis. It clearly separates facts supported by the supplied web results from parameters requiring datasheet confirmation, helping engineers compare the MAX V CPLD without treating unsupported specifications as established facts.

USD $1.25 有现货

5M240ZT100A5N

5M240ZT100A5N - 192-Macrocell MAX V CPLD, 100-TQFP, Automotive | Intel

The Intel 5M240ZT100A5N is a member of the MAX V family of Complex Programmable Logic Devices (CPLDs), offering 192 logic macrocells, 79 user I/Os, and an internal operating frequency of 118.3 MHz in a 100-pin TQFP package. Built on a non-volatile flash-based process, the device provides instant-on operation and reprogrammability in-system through JTAG, with 1.8 V core logic supplied from an internal regulator. What is a CPLD? A Complex Programmable Logic Device is a non-volatile programmable logic IC that bridges the gap between discrete glue logic (74-series gates) and larger FPGAs. CPLDs excel at deterministic, pin-to-pin combinational and registered logic with predictable timing, low static power, and instant-on behavior. They sit within the broader taxonomy of programmable logic devices (PLD), above simple PLAs and PALs but below FPGAs in logic density. The MAX V family targets glue-logic replacement, bus interfacing, I/O expansion, and power-sequencing tasks in cost-sensitive designs. Key features of the 5M240ZT100A5N include 192 macrocells across 4 logic array blocks (LABs), a 7.5 ns pin-to-pin propagation delay, support for 3.3 V, 2.5 V, 1.8 V, and 1.5 V I/O standards via MultiVolt I/O, and an internal oscillator eliminating the need for external clock circuitry on entry-level designs. The device also offers in-system programmability (ISP) via JTAG, on-chip flash with 100,000 programming cycles endurance, and AEC-Q100 automotive qualification for harsh-environment deployments. The MAX V architecture combines a low-power CMOS process with non-volatile flash configuration memory, enabling zero-configuration-time boot from a cold start. The MultiVolt core and I/O architecture permit mixed-voltage interfacing between a 1.8 V core and 1.5 V to 3.3 V peripherals without external level shifters, simplifying board design for systems that bridge legacy 3.3 V logic with newer low-voltage ASICs. Typical applications include automotive body electronics and instrument clusters, industrial control PLCs, I/O expansion for microcontrollers, glue-logic consolidation, power-supply sequencing controllers, and bus-bridging between SPI, I2C, UART, and parallel buses. Designers frequently select the 5M240ZT100A5N for cost-sensitive, deterministic glue logic where FPGA overkill is undesirable. When designing with this part, ensure that VCCINT (1.8 V) is supplied from a low-noise LDO and that JTAG chain integrity is preserved through proper TMS, TDI, TDO, and TCK pull-ups. The 100-pin TQFP package has a moderate thermal footprint suitable for industrial temperature operation; use thermal vias under the exposed pad for improved heat spreading in enclosed automotive housings. This page synthesizes distributor pricing from Mouser/DigiKey/Octopart, automotive-grade same-brand drop-in alternatives from the MAX V family, and practical design notes not consolidated on the manufacturer product page.

USD $6.10 有现货

5M240ZT100C4N

5M240ZT100C4N - MAX V CPLD, 192 Logic Elements, TQFP-100 | Intel

The Intel (formerly Altera) 5M240ZT100C4N is a member of the MAX V family of Complex Programmable Logic Devices (CPLDs) housed in a 100-pin TQFP (T100) package. It provides 192 macro cells / 240 logic elements, 8 Kbits of user flash memory, and an internal JTAG interface, all fabricated on a low-power 1.8 V core process. The "Z" speed grade targets an fMAX of approximately 184 MHz, while the "C" temperature rating covers the commercial 0 °C to +85 °C operating window. The "T100" suffix denotes the thin plastic TQFP-100 footprint with 100 surface-mount leads, and the trailing "4N" indicates speed/packaging option code and lead-free, RoHS-compliant assembly. What is a CPLD? A Complex Programmable Logic Device is a non-volatile programmable logic device that sits in the system hierarchy between simple glue-logic ICs (74-series gates, muxes) and higher-density FPGAs. Unlike SRAM-based FPGAs that require external configuration memory, a CPLD stores its configuration in on-chip flash or EEPROM and becomes active at power-on within microseconds. CPLDs are typically used as "glue logic" to perform bus decoding, interface bridging, power-up sequencing, and I/O expansion between processors, memories, and peripherals where deterministic timing and instant-on behaviour matter more than raw logic density. Key features of the MAX V 5M240ZT100C4N include multi-volt I/O support (1.5 V, 1.8 V, 2.5 V, 3.3 V LVCMOS/LVTTL) through 4 I/O banks with independent VCCIO rails, an internal oscillator that removes the need for an external clock source for simple state-machine designs, and a built-in IEEE 1149.1 JTAG controller plus JTAG-aware in-system programmability. The device consumes approximately 30 mA of ICC supply current in typical operation and is well-suited for battery-backed or thermally-constrained boards. The MAX V architecture uses a unified flash-based Logic Array Block (LAB) fabric combined with a global interconnect matrix. Each macro cell contains a programmable AND/OR/flip-flop set with per-pin output enables, enabling both combinational and registered logic at the pin. Configuration is stored on-chip, so the part behaves like dedicated logic immediately after VCC ramp — a critical advantage in power-sequenced systems and hot-swap designs. Typical applications include I/O expansion and bus decode for microcontrollers, glue logic between ASSPs and DDR/DDR2 memory controllers, industrial control boards requiring instant-on logic, JTAG-based board-level test infrastructure, and pin-compatible logic consolidation when migrating from legacy 5 V CPLDs (using 3.3 V VCCIO with level shifters). When designing with this part, observe the JTAG pin grouping (TMS, TDI, TDO, TCK are bank-1-only and do not support PCI or 1.2 V LVCMOS standards). Decoupling requirements follow the MAX V handbook: 0.1 µF ceramic capacitors close to each VCC and VCCIO pin, plus a bulk capacitor on each supply rail. This page synthesizes distributor pricing, drop-in MAX V and pin-compatible alternative CPLDs, and practical design notes not found in the bare manufacturer datasheet.

USD $3.10 有现货

5M240ZT100C5N

5M240ZT100C5N - 240 Logic Element MAX V CPLD, 100TQFP | Intel / Altera

The Intel / Altera (formerly Altera) 5M240ZT100C5N is a MAX V family Complex Programmable Logic Device (CPLD) that integrates 240 logic elements (LEs), 192 macrocells, and 79 user I/Os into a 100-pin TQFP package. It belongs to the low-power, non-volatile MAX V CPLD family that delivers instant-on, single-chip logic integration with an internal flash configuration memory, eliminating the need for external boot PROMs. A CPLD (Complex Programmable Logic Device) is a non-volatile programmable logic device that uses a sum-of-products architecture with continuous interconnect fabric. In the broader programmable logic taxonomy, CPLDs sit below FPGAs in density but above simple SPLDs (Simple PLDs) and discrete 74-series glue logic. MAX V CPLDs are positioned as low-power, low-cost logic expansion devices for I/O bridging, bus interface conversion, power-up sequencing, and state-machine control in systems where a microcontroller alone is insufficient but an FPGA would be overkill. The 5M240ZT100C5N features 8 Kbits of user flash memory, an internal oscillator (optional use), 4.5 ns pin-to-pin logic delay (Tpd1), and a maximum internal operating frequency of 118.3 MHz. It supports in-system programmability via JTAG, supports 1.8V core with multi-voltage I/O banks (1.5V, 1.8V, 2.5V, 3.3V LVCMOS/LVTTL), and provides on-chip voltage regulator (3.3V VCC supplies the internal 1.8V core). It is offered in a commercial temperature grade of 0C to +85C. The MAX V architecture uses a flash-based non-volatile configuration cell, which provides instant-on operation at power-up. It also features MultiVolt I/O, JTAG-based IEEE 1149.1 boundary-scan support, and 4 user I/O banks that allow voltage translation between mixed-voltage subsystems without external level shifters. Typical applications for the 5M240ZT100C5N include I/O expansion and voltage translation between processors and peripherals, LED driving and display control, power sequencing in multi-rail systems, bus interface bridging (e.g., SPI to parallel, I2C to GPIO), and glue-logic replacement in industrial and consumer designs. When designing with this device, consider that the 1.8V internal core is derived from the 3.3V VCCINT supply rail; users only need to supply 3.3V externally. The Quartus II (or Quartus Prime) design software is used for design entry, fitting, and programming. Designers should refer to the MAX V Device Handbook for detailed I/O bank guidelines and JTAG chain considerations. This page synthesizes distributor pricing, drop-in alternative cross-references, and practical design notes for the 5M240ZT100C5N that are not consolidated on the manufacturer datasheet, supporting both engineer evaluation and BOM management.

USD $4.98 有现货

5M240ZT100I5N

5M240ZT100I5N - 240 LE MAX V CPLD, 100-TQFP | Intel / Altera

The Intel (formerly Altera) 5M240ZT100I5N is a non-volatile, instant-on MAX V family Complex Programmable Logic Device (CPLD) with 240 logic elements (approximately 192 macrocells), supplied in a 100-pin TQFP (T100) package, 14 x 14 mm body, 0.50 mm pitch, industrial temperature grade, -5 speed grade, and 1.8 V core operation. Per the verified manufacturer description, the device supports up to 114 user I/O and a maximum internal clock frequency of 118.3 MHz. What is a CPLD? A Complex Programmable Logic Device is a non-volatile programmable logic device that bridges the gap between simple SPLDs (such as PALs/GALs) and larger FPGAs. CPLDs use a classic AND-OR (PLA-like) fabric backed by non-volatile flash configuration memory, giving them instant-on behavior at power-up with no external boot PROM required. They are widely used for glue logic, bus interfacing, power-sequencing, and I/O expansion in industrial, automotive, and communications systems. Key features of the 5M240ZT100I5N include 8 Kbit of user flash memory, JTAG (IEEE 1149.1) and ISP (in-system programmability) via IEEE 1533, support for multiple I/O standards (LVCMOS, LVTTL, PCI, LVDS, SSTL) on a per-bank basis, and a wide VCCIO range suitable for mixed-voltage designs. The TQFP-100 footprint gives a thermally robust surface-mount solution with 79 user I/O pins accessible for general-purpose logic. Architecturally, the 5M240Z device combines a flash-based logic array block (LAB) fabric with I/O registers and a MultiTrack interconnect, allowing deterministic, fast-pin-to-pin timing (tPD1) suitable for control-plane functions. The MAX V family uses a 1.8 V core with separate VCCIO banks, which simplifies mixed-voltage interfacing to legacy 3.3 V/2.5 V/1.8 V peripherals without external level shifters. Typical applications include industrial control I/O expansion, power-supply sequencing controllers, bus bridge and address decoding glue logic, motor-control PWM and timing generation, LED display drivers, automotive body electronics (auxiliary functions), and consumer white-goods control boards where instant-on and high reliability are required. Designers also use the 5M240ZT100I5N as a companion CPLD to FPGAs for housekeeping and configuration management. When designing with this device, pay attention to bank VCCIO supply selection (each bank supports a different I/O standard), use the Quartus Prime design suite for synthesis and fitting, and follow the JTAG chain order if multiple devices share the same boundary-scan bus. Reserve one GPIO as a global clock input for best timing closure. This page synthesizes distributor pricing, drop-in MAX V family alternatives, and design guidance not always present in the manufacturer datasheet.

USD $4.81 有现货

子分类

产品（32725)