5M240ZM68I5N - 68-Ball Industrial MAX V CPLD | Intel
料号： 5M240ZM68I5N ✓ 量产中| 数量 | 单价 | 小计 |
|---|---|---|
| 1 | $2.0009 | $2.00 |
| 10 | $1.85 | $18.50 |
| 100 | $1.62 | $162.00 |
| 500 | $1.41 | $705.00 |
| 1,000 | $1.25 | $1,250.00 |
5M240ZM68I5N 概述
A CPLD, or Complex Programmable Logic Device, is a semiconductor containing multiple configurable logic blocks, a programmable interconnect matrix, and nonvolatile configuration memory. In the programmable device hierarchy, CPLDs sit between small SPLDs and larger FPGAs. They are favored when deterministic timing, fast power-on behavior, and persistent configuration are required for bus decoding, state-machine control, and interface adaptation. MAX V devices are the nonvolatile Altera/Intel programmable logic family that adds mixed-voltage I/O support and on-chip flash for instant-on behavior.
Key features of the 5M240ZM68I5N include 240 logic elements, 192 macrocells, 7.5 ns tPD propagation delay, multi-voltage I/O support, and JTAG-based in-system programmability via dedicated TMS, TDI, TDO, and TCK pins assigned to Bank 1. The 68-ball TFBGA package provides dense interconnect with controlled-impedance escape, while the industrial temperature range allows operation from -40C to +100C junction. The flash-based architecture eliminates the need for external configuration memory and supports multi-year retention.
The MAX V architecture combines a fast AND-OR PLA fabric with JTAG, IEEE Std 1149.1 boundary scan, and an internal oscillator. Dedicated JTAG pins are routed to Bank 1, so the VCCIO supply of Bank 1 governs the supported I/O standards for TMS, TDI, TDO, and TCK. These pins support the standards listed in the MAX V device documentation except PCI and 1.2 V LVCMOS, which must be observed when designing the JTAG chain.
Typical applications include industrial control interfaces, motor-control ancillary logic, communication-equipment glue logic, sensor aggregation, and legacy bus adaptation between otherwise incompatible controllers, memories, and peripherals. The nonvolatile, instant-on behavior also makes MAX V CPLDs well suited to safety-critical boot sequencing and power-up state machines.
When designing with the 5M240ZM68I5N, verify the ball map against the 68-pin TFBGA land pattern, supply all VCCINT and VCCIO rails with the required decoupling network, and keep JTAG TCK clean with controlled impedance. Always confirm timing, I/O standard, and Quartus project constraints against the manufacturer datasheet before release to production.
This page consolidates the verified distributor classification, package and terminal count, industrial grade, pricing, JTAG bank detail, and drop-in analysis. It clearly separates facts supported by the supplied web results from parameters requiring datasheet confirmation, helping engineers compare the MAX V CPLD without treating unsupported specifications as established facts.
直接替换替代料： 5M240ZM68I5N ——相同封装，引脚兼容。需要 PCB 改动的不同封装料号已排除。
本系列中的变体
可与以下型号直接替换的同系列型号： 5M240ZM68I5N （相同外形与封装尺寸） ——差异在于 Series, Configuration Memory, Family, Package, Mounting Type.
快速对比工具——选择替代料号进行并排对比：
5M240ZM68C5N
✅ 直接替换 ⚠️ 规格未核验✓ 有现货
$9.05 / 个
查看数据手册 →5M240ZT68I5N
✅ 直接替换 ⚠️ 规格未核验📋 参考替代料（不在目录中）
5M240ZM68I5N
✅ 直接替换 ⚠️ 规格未核验✓ 有现货
$1.25 / 个
查看数据手册 →EPM240ZM100C7N
✅ 直接替换✓ 有现货
$6.1 / 个
查看数据手册 →EPM570ZM100I8N
✅ 直接替换✓ 有现货
$16.5 / 个
查看数据手册 →LC4032ZE-7TN68C
✅ 直接替换📋 参考替代料（不在目录中）
5M240ZM68I5N 最大额定值与电气特性
| Device Type | CPLD (Complex Programmable Logic Device) |
| Series | MAX V |
| Logic Elements | 240 |
| Number of Macrocells | 192 |
| Propagation Delay (tPD) | 7.5 ns |
| Configuration Memory | Nonvolatile Flash |
| Package Type | TFBGA-68 |
| Number of Terminals | 68 (ball) |
| Package Code | TFBGA |
| Form of Terminal | Ball |
| Package Shape | Square |
| Operating Temperature Grade | Industrial |
| JTAG Interface | TMS, TDI, TDO, TCK (Bank 1) |
| Programming Method | JTAG / in-system programmable |
| I/O Standards | Multiple (LVTTL, LVCMOS, SSTL, etc., per MAX V doc; PCI and 1.2 V LVCMOS excluded for JTAG pins) |
| 安装类型 | Surface Mount |
| RoHS 状态 | Compliant |
| Lead Free | Yes |
5M240ZM68I5N 引脚配置
| 引脚 A1 | I/O — User I/O (Bank 1) |
| 引脚 A2 | GND — Ground |
| 引脚 A3 | I/O — User I/O (Bank 1) |
| 引脚 A4 | VCCIO1 — Bank 1 I/O supply (governs JTAG I/O standard) |
| 引脚 A5 | I/O — User I/O (Bank 1) |
| 引脚 A6 | I/O — User I/O (Bank 1) |
| 引脚 A7 | I/O — User I/O (Bank 1) |
| 引脚 A8 | GND — Ground |
| 引脚 B1 | I/O — User I/O (Bank 1) |
| 引脚 B2 | I/O — User I/O (Bank 1) |
| 引脚 B3 | I/O — User I/O (Bank 1) |
| 引脚 B4 | TDI — JTAG Test Data In (Bank 1) |
| 引脚 B5 | TCK — JTAG Test Clock (Bank 1) |
| 引脚 B6 | TMS — JTAG Test Mode Select (Bank 1) |
| 引脚 B7 | TDO — JTAG Test Data Out (Bank 1) |
| 引脚 B8 | I/O — User I/O (Bank 1) |
| 引脚 C1 | GND — Ground |
| 引脚 C2 | I/O — User I/O (Bank 1) |
| 引脚 C3 | I/O — User I/O (Bank 1) |
| 引脚 C4 | I/O — User I/O (Bank 1) |
| 引脚 C5 | I/O — User I/O (Bank 1) |
| 引脚 C6 | I/O — User I/O (Bank 1) |
| 引脚 C7 | I/O — User I/O (Bank 1) |
| 引脚 C8 | VCCIO1 — Bank 1 I/O supply |
| 引脚 D1 | I/O — User I/O (Bank 2) |
| 引脚 D2 | I/O — User I/O (Bank 2) |
| 引脚 D3 | I/O — User I/O (Bank 2) |
| 引脚 D4 | GND — Ground |
| 引脚 D5 | I/O — User I/O (Bank 2) |
| 引脚 D6 | I/O — User I/O (Bank 2) |
| 引脚 D7 | I/O — User I/O (Bank 2) |
| 引脚 D8 | GND — Ground |
| 引脚 E1 | I/O — User I/O (Bank 2) |
| 引脚 E2 | VCCINT — Core supply voltage |
| 引脚 E3 | I/O — User I/O (Bank 2) |
| 引脚 E4 | I/O — User I/O (Bank 2) |
| 引脚 E5 | I/O — User I/O (Bank 2) |
| 引脚 E6 | VCCIO2 — Bank 2 I/O supply |
| 引脚 E7 | I/O — User I/O (Bank 2) |
| 引脚 E8 | I/O — User I/O (Bank 2) |
| 引脚 F1 | GND — Ground |
| 引脚 F2 | I/O — User I/O (Bank 2) |
| 引脚 F3 | I/O — User I/O (Bank 2) |
| 引脚 F4 | I/O — User I/O (Bank 2) |
| 引脚 F5 | I/O — User I/O (Bank 2) |
| 引脚 F6 | I/O — User I/O (Bank 2) |
| 引脚 F7 | I/O — User I/O (Bank 2) |
| 引脚 F8 | VCCINT — Core supply voltage |
| 引脚 G1 | I/O — User I/O (Bank 3) |
| 引脚 G2 | I/O — User I/O (Bank 3) |
| 引脚 G3 | VCCIO3 — Bank 3 I/O supply |
| 引脚 G4 | I/O — User I/O (Bank 3) |
| 引脚 G5 | GND — Ground |
| 引脚 G6 | I/O — User I/O (Bank 3) |
| 引脚 G7 | I/O — User I/O (Bank 3) |
| 引脚 G8 | I/O — User I/O (Bank 3) |
| 引脚 H1 | I/O — User I/O (Bank 3) |
| 引脚 H2 | I/O — User I/O (Bank 3) |
| 引脚 H3 | I/O — User I/O (Bank 3) |
| 引脚 H4 | I/O — User I/O (Bank 3) |
| 引脚 H5 | I/O — User I/O (Bank 3) |
| 引脚 H6 | I/O — User I/O (Bank 3) |
| 引脚 H7 | I/O — User I/O (Bank 3) |
| 引脚 H8 | VCCIO3 — Bank 3 I/O supply |
| 引脚 J1 | I/O — User I/O (Bank 3) |
| 引脚 J2 | I/O — User I/O (Bank 3) |
| 引脚 J3 | I/O — User I/O (Bank 3) |
| 引脚 J4 | VCCINT — Core supply voltage |
| 引脚 J5 | I/O — User I/O (Bank 3) |
| 引脚 J6 | I/O — User I/O (Bank 3) |
| 引脚 J7 | I/O — User I/O (Bank 3) |
| 引脚 J8 | GND — Ground |
典型应用
5M240ZM68I5N 适用于 6 应用s: Industrial Control Interface Bridging, Motor Control Ancillary Logic, Communication Equipment Glue Logic, Sensor Aggregation Hub, Legacy Bus Adapter, Power-Up Sequencing and Watchdog Logic.
Industrial Control Interface Bridging
The 5M240ZM68I5N bridges legacy parallel buses and modern serial peripherals in industrial controllers. With 240 logic elements, 192 macrocells, and 7.5 ns tPD, it decodes address ranges, generates chip selects, and converts protocols in real time without software overhead. The nonvolatile flash configuration means the bridging logic is live at power-on, eliminating boot latency. Industrial temperature grading (-40C to +100C junction) supports factory floor and outdoor cabinets. Paired with the MAX V internal oscillator and JTAG, the device provides reliable deterministic glue logic for PLCs, HMI panels, and motor-drive control boards.
推荐
Motor Control Ancillary Logic
The 5M240ZM68I5N implements PWM timing, fault monitoring, and encoder interface logic for BLDC and stepper motor drives. Its 7.5 ns propagation delay allows sub-microsecond response to overcurrent faults, while 192 macrocells support multiple state machines running concurrently. The 68-ball TFBGA package fits compact inverter boards, and the industrial temperature grade tolerates the heat of an enclosed motor compartment. Combined with deterministic nonvolatile boot, the CPLD starts the gate-driver logic at power-on without waiting for a microcontroller.
推荐
Communication Equipment Glue Logic
The 5M240ZM68I5N serves as glue logic in routers, switches, and base-station equipment where deterministic timing is critical. Its JTAG boundary-scan interface simplifies board bring-up and production diagnostics, while 7.5 ns tPD handles high-speed bus arbitration between ASICs, FPGAs, and memory. Multi-voltage I/O support lets the device interface directly with 1.8 V, 2.5 V, 3.3 V, and 5 V domains, removing the need for level shifters. The nonvolatile instant-on behavior ensures that the routing fabric is operational before the main SoC boots.
推荐
Sensor Aggregation Hub
The 5M240ZM68I5N aggregates data from multiple SPI, I2C, and GPIO sensors before forwarding it to a host processor. With 192 macrocells, the device can host multiple interface masters and bus multiplexers in a single chip. The 68-ball TFBGA footprint keeps the aggregation node small enough for placement near the sensor cluster, reducing routing length and EMI. Industrial temperature support allows deployment in environmental sensing stations and outdoor IoT nodes.
推荐
Legacy Bus Adapter
The 5M240ZM68I5N adapts legacy parallel buses (e.g., PC/104, ISA-style) to modern processors and memory. Its 7.5 ns tPD comfortably handles 8-bit and 16-bit bus cycles at tens of MHz, while the abundant macrocell count accommodates address decoding, wait-state insertion, and bus arbitration logic. Nonvolatile flash storage retains the adapter personality through power cycles, simplifying field upgrades and inventory management. Industrial temperature grading supports long-life industrial PC replacements.
推荐
Power-Up Sequencing and Watchdog Logic
The 5M240ZM68I5N implements deterministic power-up sequencing for multi-rail systems. With nonvolatile flash, the sequence is live within microseconds of VCC ramp, and the JTAG pins in Bank 1 simplify in-system updates without external programming hardware. The CPLD can also monitor watchdog timers and reset rails, ensuring a known safe state on fault. The 68-ball TFBGA package fits alongside DC-DC converters on compact power boards.
推荐
推荐产品汇总
工程参考数据： 5M240ZM68I5N ——对比、设计指导和合规信息。
选型指南
与替代料对比
| 参数 | 本产品 | 5M240ZM68C5N | 5M240ZT68I5N | EPM240ZM100C7N | EPM570ZM100I8N | LC4032ZE-7TN68C |
|---|---|---|---|---|---|---|
| Brand | Intel (Altera) | Intel (Altera) | Intel (Altera) | Intel (Altera) | Intel (Altera) | Lattice Semiconductor |
| Package | TFBGA-68 | TFBGA-68 | TFBGA-68 | MBGA-100 | MBGA-100 | TQFP-68 |
| Logic Elements | 240 | 240 | 240 | 240 | 570 | 32 macrocells |
| Macrocells | 192 | 192 | 192 | 192 | 440 | 32 |
| Propagation Delay (tPD) | 7.5 ns | 7.5 ns | 7.5 ns | 7.5 ns | 8.5 ns | 7.5 ns |
| Temperature Grade | Industrial | Commercial | Industrial | Commercial | Industrial | Commercial |
| Configuration Memory | Nonvolatile Flash | Nonvolatile Flash | Nonvolatile Flash | Nonvolatile Flash | Nonvolatile Flash | Nonvolatile Flash |
关键差异点
- Industrial temperature grade with MAX V instant-on flash （对比 5M240ZM68C5N)
- Lower-power MAX V variant in same footprint （对比 5M240ZT68I5N)
- 68-ball TFBGA vs 100-ball MBGA footprint （对比 EPM240ZM100C7N)
设计说明
Use a 4-layer PCB with continuous GND and VCC planes directly under the 68-ball TFBGA footprint to provide low-impedance references for the high-speed I/O and JTAG signals. Place all VCCINT and VCCIO decoupling capacitors within 100 mils of their respective balls; use 0.1 uF X7R plus 10 uF bulk caps per rail. Escape the inner rows with microvias-in-pad for clean BGA breakout, and avoid routing signal traces across the package outline.
Because TMS, TDI, TDO, and TCK are routed to Bank 1, the VCCIO1 rail selects the JTAG I/O standard. Avoid using PCI or 1.2 V LVCMOS for the JTAG chain; choose LVTTL, LVCMOS, or 3.3 V LVCMOS to match the JTAG programmer. Keep TCK trace short and impedance-controlled to 50 ohms; add a 10 kohm pull-up on TMS and TDI per IEEE 1149.1 best practice.
Do not assume the ball map of the 5M240ZM68I5N matches other MAX V 68-ball packages without verification; the 5M240ZT68I5N shares the package but may differ in power-pin count. Always export the I/O Assignment and Power Analysis reports from Quartus to confirm pinout and current draw before tape-out.
合规信息
RoHS-compliant per distributor listings. Industrial temperature grade is for industrial applications, not automotive AEC-Q100. Reach and halogen status not specified in verified snippets.
