集成电路

子分类

📁 ADC/DAC 3,100+ 产品 📁 放大器IC 1,900+ 产品 📁 音频编解码器 18 产品 📁 音频IC 2 产品 📁 时钟与计时 660+ 产品 📁 Comparator ICs 1 产品 📁 DSP 1,100+ 产品 📁 数据采集IC 2 产品 📁 数字电位器 4 产品 📁 显示驱动与控制器 1 产品 📁 FPGA与CPLD 7,300+ 产品 📁 接口IC 3,300+ 产品 📁 LED驱动器 1 产品 📁 逻辑IC 460+ 产品 📁 存储IC 870+ 产品 📁 微控制器 20,000+ 产品 📁 微处理器 4 产品 📁 电机驱动器 1 产品 📁 其他 1 产品 📁 Sensor and Detector Interfaces 1 产品 📁 专用IC 15 产品 📁 视频IC 14 产品

产品（39,000+)

EP4CE6E22I7N - Cyclone IV E FPGA 6K LEs 91 I/O | Intel
EP4CE6E22I7N

EP4CE6E22I7N - Cyclone IV E FPGA 6K LEs 91 I/O | Intel

The Intel (formerly Altera) EP4CE6E22I7N is a low-cost, low-power Cyclone IV E Field-Programmable Gate Array (FPGA) built on a 60 nm process, offering 6,272 logic elements (6K LEs) and 91 user I/Os housed in a 144-pin EQFP (Enhanced Plastic Quad Flat Pack) package with exposed thermal pad. The device integrates 270 Kbits of embedded RAM, 392 configurable logic blocks (CLBs), and two general-purpose PLLs, with a core operating frequency up to 472.5 MHz in industrial-grade silicon rated -40C to +100C junction (I7 grade). An FPGA (Field-Programmable Gate Array) is a semiconductor integrated circuit whose digital logic functionality is defined by the user via a hardware description language and configuration bitstream, rather than fixed at the factory. Positioned in the system hierarchy, FPGAs sit between programmable microcontrollers (software-driven, lower throughput) and application-specific integrated circuits (ASICs, fixed-function, higher NRE). The Cyclone IV E family specifically targets cost-sensitive, high-volume applications where ASIC-like density is unnecessary but microcontrollers cannot meet parallelism, throughput, or custom I/O requirements. Within Intel's FPGA portfolio, the Cyclone IV E sits below the Cyclone 10 LP and MAX 10 families in logic density but shares the same Quartus Prime design toolchain. Key features of the EP4CE6E22I7N include 6,272 logic elements (4-input LUT4 architecture), 270 Kbits embedded RAM supporting true dual-port, single-port, shift-register, and ROM modes, 91 user I/O pins, two PLLs, 4 Kbits of user flash memory for non-volatile configuration or data storage, and support for multiple I/O standards including LVDS, LVTTL, LVCMOS, SSTL, and HSTL. The device supports serial configuration via EPCS flash or JTAG and includes a global clock network supporting up to 20 clock pins. Architecturally, the Cyclone IV E series uses 4-input look-up tables (LUT4) as the basic logic element, with each LE containing a register and dedicated carry chain logic for arithmetic operations. The 144-pin EQFP package provides a thermal pad that can be soldered to PCB copper to reduce theta_JA and improve heat extraction for high-toggle-rate designs approaching the maximum operating frequency. Typical applications include industrial motor control, video processing bridges, low-cost ASIC prototyping, LED display controllers, and consumer electronics interfaces. The wide operating temperature range makes the I7N grade suitable for industrial control and factory automation environments. When designing with this FPGA, plan for a configuration source (EPCS flash or JTAG), adequate decoupling on each VCCINT/VCCIO rail (0.1 uF ceramic per pin plus bulk capacitance), and thermal management for designs approaching the maximum toggle rate. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet.

询价 联系我们
EP4CE6E22I8L - Cyclone IV FPGA, 6K LE, 91 I/O | Intel
EP4CE6E22I8L

EP4CE6E22I8L - Cyclone IV FPGA, 6K LE, 91 I/O | Intel

The Intel EP4CE6E22I8L is a Cyclone IV E Field Programmable Gate Array (FPGA) with 6,272 logic elements (LEs), 91 user I/O pins, and 276,480 bits of embedded memory, housed in a 144-pin LQFP Exposed Pad (EQFP-144) package. It operates from a 1.2V core supply and supports a maximum clock frequency of 362 MHz, making it a low-cost, low-power solution for a wide range of industrial, communications, and consumer applications. A Field Programmable Gate Array (FPGA) is an integrated circuit that can be configured by the customer or designer after manufacturing—hence "field-programmable." FPGAs consist of an array of programmable logic blocks, interconnects, and I/O blocks that can be wired together to implement complex digital logic functions. They sit between fixed-function ASICs and software-programmable processors, offering the flexibility of software with the parallelism and determinism of hardware. In the hierarchy of programmable logic, an FPGA is a type of programmable logic device (PLD), which falls under the broader category of embedded processing and digital integrated circuits. Key features of the EP4CE6E22I8L include 6,272 logic elements, 91 user I/O pins, 276,480 bits of embedded memory, and support for various I/O standards including LVCMOS, LVTTL, and differential standards. The device is built on a 60nm low-power process technology, which contributes to its low static power consumption. It also includes up to 15 embedded 18x18 multipliers, making it suitable for simple DSP tasks. The device supports external configuration via JTAG or active serial (AS) and passive serial (PS) modes, enabling flexible design updates. From an architectural standpoint, the Cyclone IV E family is optimized for cost-sensitive, high-volume applications. The EP4CE6E22I8L features a flexible logic array with look-up tables (LUTs) and registers, embedded memory blocks (M9K) that can be configured as RAM, ROM, or FIFO, and phase-locked loops (PLLs) for clock management. The device's 1.2V core voltage reduces power dissipation compared to older 1.5V or 1.8V FPGAs, while the -8 speed grade indicates a balanced performance level suitable for many designs. Typical applications include motor control, industrial networking, video processing, and communication interfaces. The 91 I/O pins allow interfacing with various peripherals, and the low power consumption makes it ideal for portable or thermally constrained systems. For example, in industrial automation, the FPGA can implement real-time control logic and communicate over Ethernet or CAN buses. When designing with this device, ensure proper decoupling of the 1.2V core supply and the 2.5V/3.3V I/O banks. Use the configuration device (e.g., EPCS) or JTAG for programming. Pay attention to the thermal requirements: the exposed pad must be soldered to a copper plane for adequate heat dissipation, especially when operating at high utilization. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet, providing engineers with a comprehensive resource for evaluating the EP4CE6E22I8L in their designs.

询价 联系我们
EP4CE6E22I8LN - Cyclone IV E FPGA, 6K LEs, 91 I/O | Intel
EP4CE6E22I8LN

EP4CE6E22I8LN - Cyclone IV E FPGA, 6K LEs, 91 I/O | Intel

The Intel (formerly Altera) EP4CE6E22I8LN is a Cyclone IV E family Field Programmable Gate Array (FPGA) with 6,272 logic elements, 276,480 bits of embedded memory, and 91 user I/Os, housed in a 144-pin LQFP Exposed Pad (EQFP-144) package. It is built on a low-power 60 nm process and operates from a 1.2 V core supply, offering a cost-optimized programmable logic platform for high-volume, power-sensitive designs. The integrated configuration logic, PLLs, and embedded memory blocks deliver up to 200 MHz internal operation. A Field Programmable Gate Array (FPGA) is a semiconductor integrated circuit whose logic function is defined by the user after manufacture through a configuration bitstream. In the broader taxonomy, an FPGA sits within programmable logic devices (PLD) -> digital logic ICs -> integrated circuits (ICs) -> semiconductors. Cyclone IV E is positioned as a low-cost, low-power family within Intel's FPGA portfolio, intended to compete with mid-range ASICs and ASSPs in volume applications while preserving the design flexibility and time-to-market advantage of programmable hardware. Key differentiating features of the EP4CE6E22I8LN include 6,272 logic elements arranged in 392 logic array blocks (LABs), 270 Kbits of embedded RAM, 15 embedded 18x18 multipliers for DSP operations, two general-purpose PLLs, and 91 user I/Os supporting LVDS, LVTTL, LVCMOS, SSTL, and HSTL I/O standards. The device also supports external memory interfaces including DDR, DDR2, and QDRII SRAM, and includes a hard PCI Express (PIPE) interface block. Industrial-grade temperature range (-40C to +100C) is indicated by the 'I' designator, while the 'N' suffix denotes lead-free (Pb-free) RoHS compliance. Typical applications for the EP4CE6E22I8LN span industrial control and factory automation, motor and servo drive control loops, low-cost video processing and display bridges, I/O expansion and protocol bridging for embedded processors, and glue-logic consolidation in medical, test and measurement, and consumer products. The combination of moderate logic capacity, embedded multipliers, and LVDS support makes it a strong fit for cost-driven designs that still require moderate DSP and parallel I/O bandwidth. When designing with this device, pay close attention to decoupling strategy: place 100 nF ceramic capacitors adjacent to every VCCINT and VCCIO pin pair, and use bulk capacitors at the regulator outputs. The exposed thermal pad (EP) must be soldered to a properly sized copper pour to meet thermal and electrical performance; failure to connect the EP will degrade I/O performance and may compromise reliability.

询价 联系我们
EP4CE6F17A7N - Cyclone IV E FPGA, 6K LEs, 256-BGA | Intel
EP4CE6F17A7N

EP4CE6F17A7N - Cyclone IV E FPGA, 6K LEs, 256-BGA | Intel

The Intel (formerly Altera) EP4CE6F17A7N is a Cyclone IV E family field-programmable gate array (FPGA) featuring 6,272 logic elements, 276,480 bits of embedded RAM, and 392 configurable logic blocks (CLBs), housed in a 256-ball fine-pitch BGA (FBGA-256) package measuring 17 x 17 mm with 1.0 mm ball pitch. The device is built on a low-power 60 nm process and targets cost-sensitive, high-volume applications requiring moderate logic density and on-chip memory. The 'A7N' speed grade corresponds to the 7 (industrial temperature range, -40C to +85C, with -7 speed, faster commercial) and the 'N' suffix indicates a lead-free, RoHS-compliant FBGA package. An FPGA (Field-Programmable Gate Array) is a class of programmable logic device that integrates thousands to millions of configurable logic blocks, embedded memory blocks, DSP slices, and programmable I/O cells on a single silicon die. Within the broader semiconductor hierarchy, FPGAs sit between ASICs (Application-Specific Integrated Circuits) and general-purpose microcontrollers: unlike fixed-function ASICs, FPGAs can be reconfigured post-manufacture to implement arbitrary digital logic, while providing higher performance and parallelism than software-driven MCUs. The Cyclone IV E family is Intel's mainstream low-cost, low-power FPGA line, used widely in industrial control, communications, video processing, and consumer electronics where high logic density and DSP capability are required. Key features of the EP4CE6F17A7N include 179 maximum user I/O pins, 15 total embedded multipliers (18x18), two general-purpose PLLs, and support for external memory interfaces such as DDR/DDR2 SDRAM and QDRII SRAM. The device supports hot-socketing, 3.3 V LVCMOS and LVTTL I/O standards, and configurable I/O banks. Configuration can be loaded via JTAG, Active Serial (AS), or Passive Serial (PS) modes using industry-standard EPCS or EPCQ configuration devices. The Cyclone IV E architecture uses an SRAM-based configuration cell paired with a 4-input LUT fabric, enabling efficient mapping of state machines, datapaths, and arithmetic pipelines. The 18x18 hardware multipliers accelerate DSP functions such as FIR filters, FFT butterflies, and motor-control loops, while dedicated global clock networks support up to 20 clock domains. The device consumes approximately 1.0 W of dynamic power under typical workloads, making it attractive for thermally constrained embedded systems. Typical applications include industrial motor control, factory automation controllers, video surveillance encoders, low-end wireless baseband processing, and educational/development platforms. The 256-ball FBGA package requires a multi-layer PCB with microvia or via-in-pad technology, but provides a compact 17 x 17 mm footprint suitable for space-constrained designs. When designing with this FPGA, engineers should allocate at least one complete PCB layer to dedicated ground and follow Intel's recommended decoupling scheme: a 100 uF bulk capacitor plus 0.1 uF and 0.01 uF high-frequency ceramics per power rail. Unused I/O pins must be configured as tri-stated inputs with weak pull-ups to avoid floating inputs that can cause spurious current draw or hot-socketing failures. This page synthesizes distributor pricing, drop-in same-package alternatives, and practical PCB layout guidance not found in the manufacturer datasheet alone.

询价 联系我们
EP4CE6F17C6 - Cyclone IV E FPGA 6K LEs 256-FBGA | Intel
EP4CE6F17C6

EP4CE6F17C6 - Cyclone IV E FPGA 6K LEs 256-FBGA | Intel

The Intel EP4CE6F17C6 is a low-cost, low-power Cyclone IV E field-programmable gate array (FPGA) integrating 6,272 logic elements, 276,480 bits of embedded memory, and 392 configurable logic blocks (CLBs) in a 256-ball FineLine Ball-Grid Array (FBGA-256) package. The device supports up to 179 user I/O pins and operates across a commercial 0°C to 85°C junction temperature range. The 'C6' speed grade targets mid-tier performance with Fmax up to 472.5 MHz on internal logic, making it well-suited for high-volume cost-sensitive designs. An FPGA (field-programmable gate array) is a class of programmable logic device that lets engineers implement arbitrary digital logic through a configuration bitstream loaded into on-chip SRAM. Within the broader semiconductor taxonomy, FPGAs sit alongside microcontrollers, DSPs, and ASICs as reconfigurable digital ICs used for glue logic, protocol bridging, image processing, and parallel DSP. The Cyclone IV E family specifically targets low total cost of ownership through die-size optimization, integrated transceivers-free architecture, and free Quartus Prime Lite development tools. Key features of the EP4CE6F17C6 include 15 embedded 18x18 multipliers supporting DSP functions up to ~148 MHz, two PLLs providing robust clock management, and Nios II soft-core processor compatibility for embedded control. The device supports LVDS, LVCMOS, SSTL, and HSTL I/O standards across eight I/O banks with per-bank reference voltages, enabling direct interface to DDR/DDR2 SDRAM, QDR II SRAM, and standard parallel buses. Architecturally, the Cyclone IV E fabric uses a 4-input LUT-based logic element with adjacent register, 9-Kbit M9K memory blocks, and dedicated multiplier/adder chains. The 60 nm process node balances static leakage and dynamic power, and Quartus PowerPlay estimates typical core consumption below 200 mW for representative designs. This combination suits high-volume cost-driven applications requiring deterministic logic and parallel processing. Typical applications include industrial motor control, video bridging and image aggregation, factory automation I/O expansion, low-cost software-defined radio (SDR) front ends, LED display controllers, and educational/developer platforms. The 256-FBGA 17x17 mm 1.0 mm pitch package is compatible with mainstream PCB assembly lines. When designing with this FPGA, plan power sequencing on VCCINT (1.2 V core) and VCCA (2.5 V PLL analog) before VCCIO banks come up, otherwise latch-up can occur. Use at least four PCB decoupling layers and a 4-layer stack-up to keep the PLL supplies quiet. This page synthesizes distributor pricing, drop-in alternatives across the Cyclone IV E family, and practical design notes not found in the manufacturer datasheet.

询价 联系我们
EP4CE6F17C6N - Cyclone IV E FPGA, 6K LEs, 256-FBGA | Altera
EP4CE6F17C6N

EP4CE6F17C6N - Cyclone IV E FPGA, 6K LEs, 256-FBGA | Altera

The Altera (Intel) EP4CE6F17C6N is a low-cost, low-power Cyclone IV E Field Programmable Gate Array (FPGA) housed in a 256-ball FineLine BGA (FBGA-256) package measuring 17 mm x 17 mm with a 1.0 mm ball pitch. The device integrates 6,272 logic elements, 392 configurable logic blocks (CLBs), 270 Kbits of embedded memory, and 179 maximum user I/O pins, making it a mainstream programmable-logic platform for cost-sensitive volume designs. A Field Programmable Gate Array (FPGA) is a semiconductor integrated circuit built around an array of configurable logic blocks (CLBs), embedded memory blocks, multiplier/DSP blocks, and programmable interconnect, all controlled by SRAM configuration cells. FPGAs sit between fixed-function ASICs (Application-Specific Integrated Circuits) and programmable microcontrollers, offering hardware-level parallelism, deterministic timing, and post-production reprogrammability. Cyclone IV E belongs to the low-cost, low-power FPGA family, with the broader taxonomy being FPGA -> programmable logic -> digital IC -> semiconductor. Key features of the EP4CE6F17C6N include 179 maximum user I/O pins supporting common single-ended and differential I/O standards, integrated phase-locked loops (PLLs) for clock management, and dedicated hardware multiplier blocks for DSP operations. The -C6 speed grade balances performance against power consumption, with the C6N suffix indicating the commercial temperature range and lead-free, RoHS-compliant FBGA-256 package. Architecturally, the device uses a 60 nm low-power process, four-input look-up tables (LUTs) per logic element, embedded RAM blocks of M9K type (9 Kbits each), and a configuration scheme that supports JTAG, Active Serial, and Active Parallel modes. The 256-ball FBGA package provides high I/O density for board-constrained designs while keeping the footprint small. Typical applications include industrial motor control, video processing bridges, low-cost display controllers, USB/Ethernet interface bridging, and educational FPGA development platforms. The combination of moderate logic capacity and a low-cost FBGA package makes the EP4CE6F17C6N a common choice for volume production designs replacing discrete logic or older CPLDs. When designing with this FPGA, ensure the PCB supports the 1.0 mm ball pitch of the FBGA-256 package and that the Quartus II / Quartus Prime toolchain is used for synthesis, place-and-route, and bitstream generation. Adequate decoupling, a clean reference clock, and a reliable configuration source are essential for stable operation. This page consolidates distributor pricing, pin-compatible drop-in alternatives within the Cyclone IV E family, and practical design notes not found in the manufacturer datasheet alone.

询价 联系我们
EP4CE6F17C7 - 6,272-Cell FPGA | Altera | Embedded Logic
EP4CE6F17C7

EP4CE6F17C7 - 6,272-Cell FPGA | Altera | Embedded Logic

Altera EP4CE6F17C7 is a Cyclone IV E field-programmable gate array built for cost-sensitive embedded logic, digital signal processing, and configurable control systems. The device provides 6,272 logic elements or cells, 392 configurable logic blocks, 179 user I/Os, 276,480 bits of embedded memory, and a 472.5 MHz maximum frequency in a 256-ball LBGA package measuring 17 mm by 17 mm with 1 mm ball pitch. These headline values make it suitable when moderate programmable capacity, substantial I/O access, and a compact BGA footprint are required. A field-programmable gate array is a semiconductor containing configurable logic blocks, routing resources, memory blocks, and programmable I/O cells. Engineers configure the device after PCB assembly to implement digital functions without a custom ASIC. In the system hierarchy, the FPGA sits between fixed-function integrated circuits and custom silicon: it is more flexible than standard logic ICs and generally less expensive for lower-volume products than a custom ASIC. The key feature set combines 6,272 logic cells with 276,480 embedded-memory bits and 179 I/Os. Embedded memory supports data buffering, lookup tables, packet processing, and timing functions without requiring every operation to be built from general-purpose logic. The 256-LBGA package provides 179 externally accessible signals while retaining a 17 mm by 17 mm body, which is practical for industrial controller boards, test equipment, imaging hardware, and communications equipment. Cyclone IV E devices use SRAM-based FPGA configuration, so the programmed bitstream normally requires storage in external configuration memory at power-up. Logic synthesis, place-and-route, timing analysis, simulation, and power estimation should be performed in the applicable Altera or Intel FPGA toolchain. The quoted 472.5 MHz value is a device specification from the supplied web data, while actual operating frequency depends on routing, resource usage, I/O standards, voltage conditions, and thermal design. Typical applications include industrial automation controllers, video-format conversion, machine-vision preprocessing, communications control, laboratory instruments, and educational or prototype systems. A 179-I/O budget supports mixed sensor interfaces, control peripherals, memory buses, and data-converter connections. The 6,272-cell capacity is appropriate for moderate parallel datapaths, protocol bridging, and custom state machines, but larger designs may require a higher-density Cyclone device. The principal design trade-off is I/O voltage compatibility and configuration architecture. Confirm every bank-specific voltage, termination requirement, clocking constraint, and configuration-memory interface against the manufacturer documentation before release to production. Decoupling, continuous ground reference planes, controlled-impedance routing, and thermal analysis remain necessary even though the supplied data does not state a complete recommended capacitor network or thermal resistance. This data record combines the official product identity, package geometry, distributor status, source timestamps, verified same-family ordering information, and practical selection guidance. Values not explicitly supplied—especially complete timing tables, power data, configuration details, environmental ratings, and individual pin functions—remain marked for validation rather than inferred.

询价 联系我们
EP4CE6F17C7N - Cyclone IV E FPGA 6272 LE, 256-FBGA | Altera
EP4CE6F17C7N

EP4CE6F17C7N - Cyclone IV E FPGA 6272 LE, 256-FBGA | Altera

The Altera EP4CE6F17C7N is a Cyclone IV E Field Programmable Gate Array (FPGA) with 6,272 logic elements, 179 user I/O pins, and 276,480 RAM bits, delivered in a 256-ball FineLine BGA (FBGA-256) package measuring 17 mm x 17 mm with 1 mm ball pitch. The N suffix indicates a lead-free finish, and the device uses a 60 nm, 1.2 V core architecture. Distributor search results list the part as active and available for ordering, with the DigiKey product page noting that it ships today. An FPGA is an integrated circuit whose logic fabric can be programmed after manufacturing to perform arbitrary digital functions. FPGAs sit above CPLDs in capacity and below ASICs in design-fixed cost, making them common for prototyping, parallel processing, interface bridging, and low-to-mid-volume products. Within the broader taxonomy, an FPGA is a programmable logic device under integrated circuits, and the Cyclone IV E family is Altera/Intel's cost-optimized, low-power 60 nm product line. Understanding this hierarchy helps engineers compare FPGAs by logic elements, RAM bits, I/O count, package, voltage rails, and configuration method. The device provides 392 CLBs/lab-style logic blocks according to distributor specifications, along with 276,480 RAM bits for FIFOs, line buffers, or small memory structures. Its 179 user I/O pins support multi-purpose digital interfaces, and the quoted maximum internal clock frequency is 472.5 MHz. The 1.2 V core voltage and low-cost FBGA package make it suitable for designs that need programmable parallelism without the expense of transceiver-rich FPGAs. The EP4CE6F17C7N uses SRAM-based, volatile configuration technology, meaning it must be configured at power-up from a host, external memory, or a serial configuration device. Its logic fabric is organized into Cyclone IV E architecture with embedded memory blocks and phase-locked-loop-based clock management, although not all peripheral counts are listed in the verified distributor snippets. The commercial temperature suffix C and speed grade 7 are encoded in the part number, and the N suffix indicates lead-free processing. Typical applications include industrial motor-control PWM generation, video and image preprocessing, wired-network packet FIFO or PHY bridging, high-speed data acquisition front-end glue logic, and automotive infotainment prototyping. The 179 user I/O and 276,480 RAM bits are particularly useful where parallel capture and reformatting are required, such as converting an ADC or image sensor bus into a memory or processor interface. For production designs, plan for a separate 1.2 V core supply, appropriate I/O bank voltages, and FPGA configuration storage. Because the FPGA is SRAM-based, confirm that the configuration device or host interface is included in the boot sequence. For harsh-temperature environments, use the industrial or automotive suffix variants rather than the standard commercial-grade device. This page combines distributor pricing references, drop-in Cyclone IV E F17-package alternatives, comparison tables, and practical design guidance that are not all present in one manufacturer datasheet, helping engineers evaluate the EP4CE6F17C7N faster.

询价 联系我们
EP4CE6F17C8 - 6K LEs Cyclone IV E FPGA, FBGA-256 | Intel (Altera)
EP4CE6F17C8

EP4CE6F17C8 - 6K LEs Cyclone IV E FPGA, FBGA-256 | Intel (Altera)

The Intel (formerly Altera) EP4CE6F17C8 is a Cyclone IV E family Field Programmable Gate Array (FPGA) with 6,272 logic elements, 276,480 RAM bits, and 179 user I/Os, packaged in a 256-ball FineLine BGA (F17, FBGA-256). It is built on a low-power 60 nm SRAM process and supports core supply voltages around 1.0 V to 1.2 V, with separate VCCIO banks for mixed-voltage I/O. The device includes 15 embedded 18 x 18 multipliers, 2 PLLs, and 10 global clock networks, enabling digital signal processing, control logic, and bus-bridging functions. A Field Programmable Gate Array (FPGA) is a reprogrammable semiconductor device built from an array of configurable logic blocks (CLBs), programmable interconnects, and dedicated silicon resources such as block RAM and DSP blocks. FPGAs occupy a middle ground between fixed-function ASICs and software-driven microcontrollers: they offer hardware-level parallelism and timing determinism while remaining fully re-programmable in the field. Cyclone IV E specifically targets cost-sensitive, high-volume, low-power applications and is part of Intel's mainstream FPGA portfolio alongside higher-density Cyclone IV GX and Stratix families. Key features of the EP4CE6F17C8 include support for LVDS, LVTTL, LVCMOS, SSTL, and HSTL I/O standards across up to 8 I/O banks; configuration via JTAG, Active Serial (AS), Passive Serial (PS), and Fast Passive Parallel (FPP) modes; and operation over the commercial 0 C to 85 C temperature range (the C8 speed grade). The FBGA-256 package is a 1.0 mm pitch FineLine BGA suitable for space-constrained boards, and the F17 ordering code designates that specific package. Architecturally, the EP4CE6F17C8 LE fabric uses a 4-input LUT-based logic element with embedded carry chains and register chains, giving efficient implementation of arithmetic, state machines, and pipelined data paths. Dedicated M9K memory blocks (9,216 bits each) provide distributed RAM, ROM, and FIFO functions, while the 18 x 18 multiplier blocks accelerate DSP workloads such as filtering and modulation. Two general-purpose PLLs drive clock synthesis and skew management for the global clock networks. Typical applications include industrial control and motor drive, machine vision pre-processing, USB/PCIe bridging with external PHY, LED video wall controllers, consumer display interfaces, and logic consolidation in telecom line cards. Its low static power (typical core currents in tens of mA) and reconfigurability make it popular for prototyping ASIC functionality and for production deployments in cost-sensitive embedded systems. When designing with this device, allocate sufficient PCB layers (typically four or more) to route the 256-ball BGA escape and to maintain signal-integrity for high-speed LVDS pairs. Use Intel Quartus Prime (or the legacy Quartus II) for synthesis, place-and-route, and timing closure; verify pin assignments against the pin-out file before fabrication because the FBGA-256 ball map is package-specific. This page consolidates distributor pricing, datasheet resources, drop-in alternatives in the same FBGA-256 footprint, and practical design notes beyond what the manufacturer datasheet alone provides.

询价 联系我们
EP4CE6F17C8L - Cyclone IV E FPGA, 6K LEs, 256-FBGA | Intel
EP4CE6F17C8L

EP4CE6F17C8L - Cyclone IV E FPGA, 6K LEs, 256-FBGA | Intel

The Intel (formerly Altera) EP4CE6F17C8L is a low-power, low-cost Cyclone IV E FPGA delivering 6,272 logic elements, 392 Configurable Logic Blocks (CLBs), and 179 maximum user I/Os in a 17x17 mm 256-ball FineLine BGA package. It targets cost-sensitive applications that still require programmable logic, on-chip memory, and high-speed transceiver-less DSP capability, with the commercial-grade speed grade 8 and a 0.95 mm ball-pitch package option. A Field-Programmable Gate Array (FPGA) is a semiconductor integrated circuit built around an array of Configurable Logic Blocks (CLBs) connected via programmable interconnect, surrounded by programmable I/O cells and embedded memory blocks. FPGAs sit at the top of the programmable logic hierarchy: FPGA -> programmable logic -> logic IC -> integrated circuit. They differ from ASICs in being reprogrammable in the field, from microcontrollers in offering true hardware-parallel execution, and from CPLDs in providing far higher logic density, embedded RAM, and DSP blocks. Cyclone IV E belongs to the non-volatile-free, SRAM-based low-end FPGA segment. Key features include 6,272 logic elements (~3.9K ALMs / 392 CLBs), 270 Kbits of embedded RAM, 15 embedded 18x18 multipliers, up to 179 user I/Os, four general-purpose PLLs, and support for external memory interfaces including DDR/DDR2 SDRAM and QDRII SRAM. The device uses a 60 nm low-power process and operates from a 1.0 V core / 2.5 V-3.3 V I/O supply. Cyclone IV E uses an SRAM-based configuration cell architecture loaded from a serial or parallel flash via the dedicated configuration pins. The 'C8' speed grade and commercial temperature grade 'L' (0C to +85C) define the DC timing and thermal envelope; the 'F17' suffix indicates the 17x17 mm 256-ball FBGA package with 1.0 mm pitch. Typical applications include industrial motor control, video processing bridges, low-cost software-defined radio, I/O expansion and protocol bridging, display controllers, and educational logic prototyping. The combination of DSP blocks and embedded RAM makes it well suited to moderate-throughput signal processing without leaving the low-cost FPGA tier. When designing with this device, remember that configuration data must be loaded from an external flash on every power-up; plan for an EPCS or compatible serial configuration device. Decoupling and signal-integrity on the FBGA-256 requires a 4-6 layer PCB with microvia access to the inner-row balls. This page synthesizes distributor pricing, drop-in same-package alternatives, and practical design notes not found in the manufacturer datasheet alone.

询价 联系我们
EP4CE6F17C8LN - Cyclone IV E FPGA, 6K LEs, 256-FBGA | Intel / Altera
EP4CE6F17C8LN

EP4CE6F17C8LN - Cyclone IV E FPGA, 6K LEs, 256-FBGA | Intel / Altera

The Intel (formerly Altera) EP4CE6F17C8LN is a low-power, low-cost Cyclone IV E field-programmable gate array (FPGA) housed in a 256-ball fine-pitch thin-profile BGA (F17 / FBGA-256) package. It integrates 6,272 logic elements, 392 Kbits of embedded memory, and 15 embedded 18x18 multipliers in a 60 nm process, making it a compact platform for high-volume cost-sensitive designs. An FPGA (Field-Programmable Gate Array) is a semiconductor device built around an array of configurable logic blocks (CLBs) connected by a programmable interconnect. FPGAs sit at the top of the programmable-logic hierarchy, above CPLDs and discrete logic, and are widely used for parallel DSP, glue logic, video bridging, and prototype ASIC/ASSP emulation. The Cyclone IV E family is Intel's non-transceiver low-power tier, optimized for industrial, consumer, and automotive applications where static and dynamic power consumption must stay low. Key features of the EP4CE6F17C8LN include 179 maximum user I/O pins, two general-purpose PLLs, and support for multiple I/O standards including LVDS, LVCMOS, SSTL, and PCI Express (soft IP). The 'L' suffix denotes a 1.0 V core voltage operation, and the '8' speed grade provides higher logic performance than the '7' grade. The device supports configuration via JTAG, Active Serial, and Passive Serial modes, with built-in decompression and encryption capabilities. The Cyclone IV E architecture uses adaptive logic modules (ALMs) containing 8-input fracturable look-up tables, paired with 9-Kbit M9K memory blocks distributed across the fabric. This combination delivers an efficient balance of logic density, block RAM, and DSP throughput, allowing designers to consolidate multiple discrete functions (timing, glue logic, video processing, motor control) into a single programmable device. Typical applications for EP4CE6F17C8LN include industrial control and HMI panels, video bridging and display controllers, low-cost motor drives, LED signage, and consumer electronics requiring flexible I/O. It is also widely used in education and prototype development for ASIC/ASSP replacement. The wide operating temperature range and industrial-grade reliability make it suitable for factory automation and outdoor installations. When designing with this device, pay close attention to power sequencing, decoupling, and PLL configuration. Use the Quartus Prime design software (free Lite edition available) for synthesis, place-and-route, and timing closure. Intel provides reference designs and application notes for common interfaces including DDR2/DDR3 memory controllers and LVDS display bridging. This page synthesizes distributor pricing, drop-in compatible Cyclone IV E family alternatives, and practical design notes not consolidated in the manufacturer datasheet.

询价 联系我们
EP4CE6F17C8N - Cyclone IV E FPGA, 6.3K LE, 256-BGA | Altera
EP4CE6F17C8N

EP4CE6F17C8N - Cyclone IV E FPGA, 6.3K LE, 256-BGA | Altera

The Altera (now Intel) EP4CE6F17C8N is a low-cost, low-power Cyclone IV E FPGA housed in a 256-ball FineLine BGA package (17x17 mm). It integrates 6,272 logic elements, 270 Kbits of embedded memory, and 15 embedded 18x18 multipliers, targeting high-volume cost-sensitive applications. Built on a 60 nm process, this Cyclone IV E variant supports up to 179 maximum user I/O pins with a 1.2 V core supply. A Field Programmable Gate Array (FPGA) is a semiconductor integrated circuit composed of configurable logic blocks (CLBs), programmable interconnects, I/O cells, and dedicated hard IP such as block RAM and DSP multipliers. FPGAs sit within the broader programmable logic device (PLD) hierarchy, occupying the same role as ASICs but offering post-fabrication re-programmability. Cyclone IV E belongs to Altera's low-cost FPGA family, optimized for volume production with the lowest power consumption in its class, typically below 1.5 W in static mode. Key features include 6,272 logic elements, 270 Kbits embedded RAM, 15 dedicated 18x18 hardware multipliers, two PLLs, and 179 maximum user I/Os. The device supports LVDS, LVTTL, LVCMOS, SSTL, and HSTL I/O standards with on-chip termination (OCT). Configuration options include JTAG, Active Serial (AS), Passive Serial (PS), and Fast Passive Parallel (FPP) modes. The 256-ball FBGA package provides excellent signal integrity for high-speed designs while enabling compact PCB layouts. Technically, the EP4CE6F17C8N uses a 60 nm low-k dielectric process with a 1.2 V core supply and 2.5 V/3.3 V/1.8 V/1.5 V I/O standards. The architecture separates logic, routing, and DSP blocks, enabling deterministic timing closure through Altera/Intel Quartus II design software. Built-in support for Nios II embedded processors allows soft-core CPU integration without external components. The Cyclone IV E family is widely used in industrial control, video processing, and communications infrastructure. Typical applications include motor control and drive electronics, video surveillance and image processing, industrial Ethernet gateways, LED display controllers, and portable medical devices. Its low power consumption and high logic density make it ideal for portable instrumentation, automotive infotainment prototypes, and consumer electronics requiring flexible logic integration. When designing with this FPGA, careful attention must be paid to power rail sequencing, decoupling capacitor placement near each power pin, and thermal management via the exposed pad of the FBGA package. Designers should use Intel Quartus Prime software for synthesis, place-and-route, and timing analysis. Verification of pinout compatibility against the FPGA's data sheet is essential before PCB fabrication. This page synthesizes distributor pricing, drop-in alternatives from the same Cyclone IV E family, application examples, and practical design notes not found in the manufacturer datasheet alone.

询价 联系我们
EP4CE6F17C9L - Cyclone IV E FPGA, 6K LEs, 256-FBGA | Intel
EP4CE6F17C9L

EP4CE6F17C9L - Cyclone IV E FPGA, 6K LEs, 256-FBGA | Intel

The Intel EP4CE6F17C9L is a low-power, low-cost Cyclone IV E Field Programmable Gate Array (FPGA) fabricated on a 60 nm process, offering 6,272 logic elements and 276,480 bits of embedded memory in a 256-ball FineLine Ball-Grid Array (FBGA) package. It provides 179 maximum user I/O pins, ten global clock networks, and dedicated hardware multipliers, making it well suited for high-volume, cost-sensitive digital designs. An FPGA (Field Programmable Gate Array) is a type of programmable logic device (PLD) that allows engineers to implement custom digital circuits through configuration of on-chip logic blocks, routing, and I/O. FPGAs sit between CPLDs (smaller, simpler, non-volatile) and ASICs (custom silicon) in the programmable logic hierarchy. The Cyclone IV E family specifically targets volume-driven applications where low static power, integrated transceivers are not required, and where designers need a balance of logic density, memory, and DSP capability at aggressive unit pricing. Key features of the EP4CE6F17C9L include up to 270 Kbits of general-purpose RAM, two PLLs per device quadrant, support for external memory interfaces such as DDR/DDR2 SDRAM and QDRII SRAM, and on-chip termination (OCT) for impedance matching. The device operates across a commercial 0C to 85C junction temperature range with a core voltage of 1.2 V (VCCINT) and I/O banks tolerant of multiple single-ended and differential standards including LVDS, SSTL, and HSTL. Configuration is supported through passive serial (AS), active serial (PS), and JTAG modes. The 256-ball FBGA package measures 17 mm x 17 mm with a 1.0 mm ball pitch, providing a compact footprint for high-I/O designs. Internal architecture combines Look-Up Tables (LUTs) acting as distributed logic and small RAM, M9K embedded memory blocks, and 18 x 18 hardware multipliers that can be combined for DSP functions such as FIR filters and FFT engines. Static power consumption is approximately 35 mW typical. Typical applications for this FPGA include industrial control and motor drive, video processing bridges, automotive infotainment, portable medical instrumentation, software-defined radio (SDR) baseband, and consumer electronics requiring custom glue logic or display interfacing. The combination of low cost, plentiful logic, and 179 user I/Os makes it a popular choice for legacy Cyclone III upgrades and new cost-optimized designs. When designing with the EP4CE6F17C9L, plan for proper decoupling across each power rail (VCCINT, VCCIO per bank, VCCAUX), keep configuration and JTAG traces short, and verify ball-out assignments against the Intel Pin Connection Guidelines. Quartus II Web Edition (or the corresponding Intel Quartus Prime Lite release for the Cyclone IV legacy device family) is required for synthesis, place-and-route, and bitstream generation. This page synthesizes distributor pricing, drop-in and family-swap alternatives, comparison parameters, and practical board-level design notes not consolidated in the manufacturer datasheet. All pricing references are current as of 2026-09-10 and reflect verified data from DigiKey, Mouser, and Octopart.

询价 联系我们
EP4CE6F17C9LN - Cyclone IV E FPGA, 6K LE, 256-FBGA | Intel
EP4CE6F17C9LN

EP4CE6F17C9LN - Cyclone IV E FPGA, 6K LE, 256-FBGA | Intel

The Intel (formerly Altera) EP4CE6F17C9LN is a low-cost, low-power Field Programmable Gate Array from the Cyclone IV E family, providing 6,272 logic elements, 392 CLBs, and 270 Kbits of embedded memory in a 256-ball FineLine Ball-Grid Array (FBGA) package. Built on a 60 nm low-k dielectric CMOS process, it operates from a 1.2 V core supply with 179 maximum user I/O pins supporting multiple I/O standards including LVDS, LVCMOS, SSTL, and PCI Express. The integrated transceivers block delivers up to 8 PLLs and 270 Kbit embedded RAM across 392 logic array blocks, with a typical internal operating frequency of 265 MHz. A Field Programmable Gate Array (FPGA) is a semiconductor device built around a matrix of configurable logic blocks (CLBs) connected through programmable interconnect. FPGAs occupy the middle ground between fixed-function ASICs and microcontrollers: they deliver hardware-timed parallelism and custom logic depth far beyond what any MCU can do, while avoiding the NRE and mask costs of an ASIC. Within the broader taxonomy, the EP4CE6F17C9LN sits at the silicon level: programmable logic device > FPGA > low-power FPGA > Cyclone IV E family. This lineage explains why the part is widely specified for cost-sensitive, volume production designs where unit price and total power matter as much as raw logic density. Key features include up to 6,272 logic elements, 270 Kbits of embedded RAM, 15 embedded 18x18 multipliers for DSP operations, and 6 general-purpose PLLs. The device supports configuration through JTAG, Active Serial (AS), Active Parallel (AP), and Passive Serial (PS) modes, giving hardware engineers flexibility during prototyping and production. Compared to the earlier Cyclone III generation, Cyclone IV E uses a smaller 60 nm process node and consumes up to 25% less dynamic power while expanding the logic and memory budget. Typical applications include industrial motor control, video surveillance with image processing pipelines, low-cost digital signal processing front-ends, consumer electronics requiring custom glue logic, and cost-optimized communication bridges. The 256-ball FBGA package and 0.4 mm ball pitch enable compact PCB designs while still providing the I/O count needed for parallel video, memory, and bus expansion interfaces. The 1.2 V core plus independent banked I/O supplies also simplify integration with legacy 3.3 V and 2.5 V peripherals. When designing with this part, pay attention to power sequencing across the VCCINT, VCCIO, and VCCA rails; missing one rail will damage the device. The Quartus II / Quartus Prime design suite is required for synthesis, place-and-route, and bitstream generation. The -N speed grade suffix (C9 in this part number) corresponds to the 265 MHz internal performance tier.

询价 联系我们
EP4CE6F17I7 - Cyclone IV E FPGA, 6K LEs, 256-BGA | Intel
EP4CE6F17I7

EP4CE6F17I7 - Cyclone IV E FPGA, 6K LEs, 256-BGA | Intel

The Intel / Altera EP4CE6F17I7 is a Cyclone IV E Field Programmable Gate Array with 6,272 logic elements, 392 Kbits of embedded block RAM, and 179 maximum user I/Os, packaged in a 256-pin LBGA (17x17 mm, 1 mm pitch). The device uses a low-power 60-nm process and supports up to 200 MHz internal operation with embedded multipliers and PLLs, providing a low-cost FPGA platform for high-volume applications. An FPGA (Field Programmable Gate Array) is a type of programmable logic device that allows hardware designers to configure digital logic blocks, interconnects, and I/O behavior after manufacturing. FPGAs occupy a tier between fixed-function ASICs and microcontrollers, offering parallel processing capability and deterministic timing. Cyclone IV E belongs to the Cyclone IV family within Intel's (formerly Altera's) programmable logic hierarchy, positioned as a low-power, cost-optimized family for industrial, automotive, and consumer applications. Key features of the EP4CE6F17I7 include 6,272 logic elements (LEs), 392 Kbits of embedded RAM distributed as M9K blocks, 15 embedded 18x18 multipliers, and four general-purpose PLLs. The I-variant denotes the industrial temperature grade (-40C to +85C). The device also supports configuration via JTAG and Active Serial (AS) modes, and integrates on-chip voltage regulators that allow single-supply operation from a single 1.0V/1.2V rail. From an architectural standpoint, the EP4CE6F17I7 uses an SRAM-based logic fabric with 4-input look-up tables (LUTs), fast carry chains for arithmetic, and dedicated memory blocks (M9K) that can be cascaded to support wider or deeper memory configurations. The 15 embedded 18x18 multipliers can be configured as individual multipliers or paired for 9x9 / 18x18 / 36x36 modes, enabling efficient DSP operations without consuming general logic. Typical applications include industrial motor control, video processing pipelines, low-cost video bridging, machine vision pre-processing, USB/Ethernet protocol bridging, and embedded display controllers. The wide I/O count and DSP blocks also make this device a popular choice for educational development boards (e.g., the DE0-Nano platform). When designing with the EP4CE6F17I7, pay close attention to power sequencing: VCCINT (1.2V) and VCCIO must ramp together within datasheet-specified monotonicity to avoid in-rush damage. Decoupling capacitors (0.1uF and 10uF) must be placed adjacent to each power pin, and the exposed pad (EP) thermal ball array must be soldered to the ground plane for thermal dissipation. This page synthesizes verified distributor pricing, package-level dimensions, drop-in same-family alternatives, and practical design notes not consolidated in the manufacturer datasheet, providing a one-stop reference for engineers evaluating the EP4CE6F17I7 for new designs or sourcing for production.

询价 联系我们
EP4CE6F17I7N - Cyclone IV E FPGA, 6K LE, 256-FBGA | Intel / Altera
EP4CE6F17I7N

EP4CE6F17I7N - Cyclone IV E FPGA, 6K LE, 256-FBGA | Intel / Altera

The Intel (formerly Altera) EP4CE6F17I7N is a low-cost, low-power Cyclone IV E field-programmable gate array (FPGA) containing 6,272 logic elements, 276,480 bits of embedded RAM, and 179 user I/O pins, housed in a 17x17 mm 256-ball FineLine BGA (FBGA) package. It is offered in the industrial -40C to +100C temperature grade and is well suited for cost-sensitive high-volume designs requiring moderate logic density. An FPGA (Field-Programmable Gate Array) is a type of programmable logic device (PLD) that lets designers configure digital logic, memory blocks, and I/O after fabrication. FPGAs sit at the top of the programmable logic hierarchy: PLD -> CPLD -> FPGA. Cyclone IV E belongs to Intel's mainstream low-power FPGA family, balancing logic density with low static and dynamic power consumption. Key features include 15 total 18x18 multipliers (up to 230 MHz operation), two general-purpose PLLs for clock management, and support for external memory interfaces such as DDR2 SDRAM and QDRII+ SRAM. The device also integrates 10 global clock networks and 8 user I/O banks with support for LVDS, SSTL, HSTL, and LVCMOS I/O standards. Configuration is supported through JTAG, active serial, and passive serial modes. The Cyclone IV E architecture is built on a low-power 60 nm process, providing static power reductions of up to 25 percent compared to the previous Cyclone III generation. The on-chip SRAM is organized in M9K blocks of 9 Kbits each, totaling 30 blocks, allowing flexible FIFO, ROM, and dual-port memory implementations. Typical applications include industrial motor control and factory automation, video processing and image aggregation bridges, automotive infotainment subsystems, low-cost ASIC prototyping, and consumer electronics requiring custom glue logic or display controllers. The wide operating temperature range supports outdoor and industrial deployments. When designing with this device, pay attention to BGA fanout and routing on the PCB: the 1.0 mm pitch FBGA requires microvia or via-in-pad technology for reliable escape routing. Use the Altera / Intel Quartus II design suite (or the newer Quartus Prime Lite Edition) for synthesis, place-and-route, and bitstream generation.

询价 联系我们
EP4CE6F17I8L - Cyclone IV E FPGA, 6K LEs, 256-FBGA | Altera/Intel
EP4CE6F17I8L

EP4CE6F17I8L - Cyclone IV E FPGA, 6K LEs, 256-FBGA | Altera/Intel

The Altera (now Intel) EP4CE6F17I8L is a low-power, low-cost Cyclone IV E Field Programmable Gate Array (FPGA) housed in a 256-ball FineLine BGA (FBGA) package with 179 user I/O pins. It integrates 6,272 logic elements, 276,480 bits of embedded memory, and 15 embedded 18x18 multipliers, making it well suited for cost-sensitive digital logic, glue logic, and parallel processing applications. The device is fabricated on a low-power 60 nm process and operates from a 1.2 V core supply with industry-standard configuration support including JTAG and Active Serial. A Field-Programmable Gate Array (FPGA) is a type of programmable logic device (PLD) that contains an array of configurable logic blocks (CLBs), programmable interconnects, and I/O cells, all of which can be reconfigured by the designer after manufacturing. FPGAs sit in the broader taxonomy: programmable logic -> digital IC -> integrated circuit -> semiconductor. They fill the role between ASICs (high NRE, high volume) and discrete logic (low density), offering fast time-to-market, hardware-level parallelism, and in-system reprogrammability for applications such as industrial control, video processing, and communications. The EP4CE6F17I8L integrates dual-purpose configuration pins, supports up to four PLL outputs for clock management, and offers up to 270 Kbits of M9K embedded memory blocks. The 256-FBGA package supports industrial temperature grade (-40C to +100C ambient), making the part suitable for factory automation and outdoor equipment where commercial-grade parts would be inadequate. Typical applications include industrial motor control, video bridging and display controllers, telecommunications line cards, low-cost ASIC prototyping, and embedded vision front-ends. The Cyclone IV E family's balance of logic, memory, and DSP blocks also makes it useful for software-defined radio (SDR) baseband processing and IoT gateway designs. When designing with this device, plan for a minimum of two configuration modes (JTAG plus Active Serial) for flexibility. Pay close attention to banked I/O voltages - the Cyclone IV E supports LVDS, LVTTL, LVCMOS, SSTL, and HSTL I/O standards across eight I/O banks, but each bank requires a dedicated VCCIO supply. Adequate decoupling (100 nF plus 10 uF bulk caps per supply pin group) and a properly designed ground pour are essential for signal integrity at higher toggle rates. This page synthesizes distributor pricing, drop-in alternatives from the same Cyclone IV E family, and practical FPGA design notes not found in the manufacturer datasheet alone.

询价 联系我们
EP4CE6F17I8LN - Cyclone IV E FPGA 6K LE 256-FBGA | Altera
EP4CE6F17I8LN

EP4CE6F17I8LN - Cyclone IV E FPGA 6K LE 256-FBGA | Altera

The Intel (formerly Altera) EP4CE6F17I8LN is a low-cost, low-power Cyclone IV E FPGA featuring 6,272 logic elements (LEs), 392 Kbits of embedded memory, and 179 maximum user I/Os, housed in a 256-ball FineLine BGA (FBGA-256) package. Built on a 60 nm TSMC process, this industrial-temperature-grade device operates across -40C to +100C with core voltages of 1.0V/1.2V and I/O voltages from 1.2V to 3.3V. The device integrates 15 embedded 18x18 multipliers and supports up to 4 PLLs, making it well suited for cost-sensitive digital logic, glue logic, and DSP front-end designs. An FPGA (Field Programmable Gate Array) is a semiconductor device built around an array of configurable logic blocks (CLBs) connected via programmable interconnect, allowing designers to implement arbitrary digital circuits after fabrication. FPGAs sit within the broader taxonomy of programmable logic devices (PLDs), alongside CPLDs, and are commonly used to prototype ASIC designs, accelerate parallel DSP algorithms, or provide flexible I/O bridging in industrial systems. The Cyclone IV E family targets high-volume, cost-optimized applications where the flexibility of an FPGA matters more than the highest possible density. Key features include Cyclone IV E architecture with up to 6,272 LEs and 392 Kbits of embedded RAM, 179 user I/Os supporting LVDS, LVTTL, LVCMOS, SSTL, and other I/O standards, integrated 18x18 multipliers for DSP blocks, four general-purpose PLLs for clock management, and support for external memory interfaces including DDR2 SDRAM and QDRII SRAM. The architecture pairs logic-array blocks (LABs) with M9K embedded memory blocks, multiplier blocks, and a flexible routing fabric. Its static core power is low enough that the device can be cooled with a modest PCB thermal pattern, and the FPGA is configured via standard JTAG or active/parallel configuration schemes using low-cost EPCS serial configuration devices. Typical applications include industrial motor control and PLC interfaces, factory automation and protocol bridging, low-cost video processing for surveillance, USB and UART-based bridge logic, and educational/rapid-prototyping platforms that benefit from Quartus II Web Edition support. When designing with the EP4CE6F17I8LN, ensure adequate decoupling on every I/O bank supply pin and follow Altera's recommended FBGA-256 PCB layout guidelines for fine-pitch BGA escape routing. Plan configuration-mode selection (AS, PS, JTAG) early because the MSEL pins are not recoverable after PCB fabrication. This page synthesizes distributor pricing, drop-in FPGA alternatives, and practical Quartus II design notes not found in the manufacturer datasheet alone.

询价 联系我们
EP4CE6U14I7N - 6,272-LUT Cyclone IV E FPGA, 256-LFBGA | Intel
EP4CE6U14I7N

EP4CE6U14I7N - 6,272-LUT Cyclone IV E FPGA, 256-LFBGA | Intel

The Intel EP4CE6U14I7N is a Cyclone IV E field-programmable gate array (FPGA) containing 6,272 logic elements, 179 maximum user I/O pins, and 276,480 bits of embedded memory, housed in a 256-ball fine-pitch BGA (256-LFBGA / U14 / UBGA-256) package. The device is fabricated on a 60 nm process and operates from a 1.2 V core supply with PLL support for clock management. The ordering code suffix I7N identifies the device's speed grade and industrial temperature rating, and the U14 segment identifies the UFBGA-256 package variant with 1.0 mm ball pitch. An FPGA (Field-Programmable Gate Array) is a semiconductor device whose logic function is defined by a user-supplied configuration bitstream rather than fixed mask-level fabrication. In the system hierarchy, an FPGA sits under programmable logic, which itself is a branch of digital integrated circuits. Unlike an ASIC, an FPGA is fully reprogrammable in the field, allowing iterative development, in-system upgrades, and last-minute design changes. Configurable logic blocks, embedded memory blocks, multiplier blocks, PLLs, and programmable I/O together let one hardware platform implement glue logic, state machines, DSP pipelines, custom peripheral bridges, and even soft processor cores. FPGAs are most useful when interface requirements change frequently, when parallel processing throughput is required, when time-to-market is critical, or when production volume does not yet justify a custom ASIC. Key features of the EP4CE6U14I7N include 6,272 logic elements for combinational and sequential logic, 276,480 bits of embedded RAM for FIFOs and packet buffers, 179 maximum user I/O pins for parallel external interfacing, a 1.2 V core supply with on-chip voltage regulation, multi-standard I/O support (LVTTL, LVCMOS, SSTL, LVDS, and other common single-ended and differential standards), JTAG-based configuration via the standard IEEE 1149.1 boundary-scan interface, and industrial-grade operating temperature. The 256-LFBGA package enables dense board layouts but requires microvia-compatible PCB stack-ups for fan-out escape routing. The Cyclone IV E architecture is built on a 60 nm low-power process. Logic elements are organized into logic array blocks with embedded memory bits distributed across M9K memory blocks. The exact number of PLLs, 18x18 multipliers, configuration modes, and supported I/O standards are not provided in the supplied data excerpts and must be confirmed against the manufacturer datasheet before schematic release. Typical applications include industrial control and factory automation, communications infrastructure, test and measurement equipment, video and image processing pipelines, motor-control interfaces, parallel sensor aggregation, and general-purpose digital prototyping. The 179 I/O count makes the device well suited to custom peripheral bridges and control-logic consolidation that would otherwise require multiple discrete ICs. When designing with this device, verify the complete power, I/O, configuration, and timing requirements from the manufacturer datasheet. A 256-LFBGA package requires controlled PCB stack-up, microvia or via-in-pad escape design, and thermal analysis; do not infer unsupported architectural details from the short product excerpts. This page combines verified ordering, package, resource, and distributor information with practical selection guidance, separating confirmed facts from datasheet items that require further documentation.

询价 联系我们
EP4CE75F23C6 - Cyclone IV E FPGA, 75K LEs, 484-FBGA | Intel
EP4CE75F23C6

EP4CE75F23C6 - Cyclone IV E FPGA, 75K LEs, 484-FBGA | Intel

The Intel (formerly Altera) EP4CE75F23C6 is a Cyclone® IV E family Field-Programmable Gate Array (FPGA) integrating 75,408 logic elements, 2,810,880 bits of embedded memory, and 274 embedded 18x18 multipliers in a 484-pin FineLine BGA (F23, 23x23 mm, 1.0 mm pitch) package. Built on a 60 nm low-power process and powered from a 1.2 V core supply, the device targets cost-sensitive, high-volume applications requiring moderate logic density and DSP throughput. A Field-Programmable Gate Array (FPGA) is a reprogrammable semiconductor device that combines configurable logic blocks (CLBs), programmable interconnects, and dedicated hard IP such as block RAM and DSP slices. Within the broader programmable logic taxonomy, an FPGA sits between a CPLD (smaller, non-volatile, low-density) and an ASIC (higher NRE, fixed function). The Cyclone IV E family specifically targets low-power, low-cost designs, positioning FPGAs as a viable alternative to microcontrollers and ASSPs for parallel, real-time processing tasks. Key Cyclone IV E features include up to 4 PLLs per device, 8 input clock pins, dedicated DDR/DDR2/QDRII memory controllers (data rates up to 200 MHz), and transceivers-less general-purpose I/O supporting LVDS, LVCMOS, SSTL, and HSTL standards. The 4,713 CLBs and 4 M9K RAM blocks (36 Kb each) plus 1 MLAB block (640 bits) deliver approximately 4.7 Mb of embedded memory. Configuration is supported via JTAG, Active Serial (AS), or Passive Serial (PS) modes, and the device family is supported by Intel Quartus® Prime design software. Typical applications include industrial machine vision, motor control and robotics, video processing pipelines, software-defined radio front-ends, LED video walls, low-cost ASIC prototyping, and bridge/aggregation logic between processors and peripherals such as DRAM, sensors, and high-speed serial links. Designers use the Cyclone IV E family when the target calls for parallel DSP throughput, deterministic latency, and reconfigurability at low BOM cost. When designing with this device, plan I/O bank partitioning carefully: the 484-FBGA package exposes 8 I/O banks whose VCCIO levels must be matched to the connected memory or peripheral I/O standard. Place decoupling capacitors (0.1 µF + bulk) adjacent to every VCCINT, VCCIO, and VCCA pin, and follow Intel's recommended PCB stack-up for the 1.0 mm-pitch FBGA to maintain signal integrity on LVDS and DDR interfaces.

询价 联系我们
EP4CE75F23C6N - Cyclone IV E FPGA, 75K LEs, 484-FBGA | Intel
EP4CE75F23C6N

EP4CE75F23C6N - Cyclone IV E FPGA, 75K LEs, 484-FBGA | Intel

The Intel (formerly Altera) EP4CE75F23C6N is a Cyclone® IV E family Field-Programmable Gate Array (FPGA) fabricated on a 60 nm low-power process, offering 75,408 logic elements, 2,810,880 bits of embedded memory, and 292 user I/O pins in a 484-ball FineLine BGA (FBGA) package. The device targets high-volume, cost-sensitive applications that require moderate logic density without the power penalty of higher-end FPGA families. What is an FPGA? A Field-Programmable Gate Array is a programmable semiconductor device whose logic fabric, routing, and I/O behavior are configured by the end user after manufacture, in contrast to an ASIC whose function is fixed at tape-out. FPGAs sit within the programmable logic device (PLD) hierarchy and are widely used as hardware accelerators, glue logic, and rapid-prototyping platforms in industrial, communications, automotive, and consumer systems. The Cyclone IV E family specifically targets low-cost, low-power designs where power budgets and unit cost matter more than maximum logic density. Key features include up to 200 MHz internal operation, embedded 18x18 multipliers for DSP operations, dedicated DDR/DDR2 SDRAM memory interfaces, and a wide range of IP cores from Intel's Quartus II tool ecosystem. Configuration is supported via JTAG, Active Serial (AS), or Passive Parallel (PPS) modes. The device supports single-supply core operation at 1.0 V or 1.2 V with dedicated PLL blocks for clock management. Typical applications include industrial motor control, video processing pipelines, automotive infotainment subsystems, low-cost ASIC prototyping, and embedded vision. The 484-FBGA package enables high I/O density for memory-bus-heavy designs while maintaining a small board footprint. When designing with this FPGA, ensure that the PCB layout provides adequate power decoupling with low-ESR capacitors placed close to each supply pin. For high-speed memory interfaces (DDR/DDR2), follow the Intel Pin Connection Guidelines and use the Quartus II board-level tools to validate signal integrity. Static I/O voltages must match the bank reference voltage configured in the pin planner.

询价 联系我们
EP4CE75F23C7 - Cyclone IV E FPGA, 75K LEs, 484-FBGA | Intel
EP4CE75F23C7

EP4CE75F23C7 - Cyclone IV E FPGA, 75K LEs, 484-FBGA | Intel

The Intel (formerly Altera) EP4CE75F23C7 is a Cyclone IV E family field-programmable gate array (FPGA) fabricated on a 60 nm low-power process, integrating 75,408 logic elements, 2,810,880 bits of embedded memory, and 292 user I/O pins in a 484-ball fine-pitch BGA package. Built around a 1.2 V core supply, the device pairs a logic-rich fabric with a generous mix of M9K memory blocks, embedded 18x18 multipliers, and PLL clock managers, targeting cost-sensitive, volume-driven applications. What is a low-cost FPGA? A low-cost FPGA (LCFPGA) is a programmable logic device that provides the integration, parallelism, and reconfigurability of a traditional FPGA while aggressively reducing silicon and packaging cost through a smaller process geometry and trimmed feature set. Cyclone IV E sits in this taxonomy as low-cost FPGA -> SRAM-based FPGA -> programmable logic -> ASIC-replacement. The Cyclone IV E family pioneered 60 nm TSMC technology for FPGAs, balancing logic density with low static and dynamic power, and remains a popular choice for industrial and communications volume designs. Key features include 4,713 configurable logic blocks (CLBs / LABs) and 4713 equivalent logic elements grouped into Logic Array Blocks, 488.4 Kbit of embedded SRAM distributed across M9K blocks, 200+ Kbit usable as general-purpose RAM, FIFOs, or shift registers, and up to 244 embedded 18x18 multipliers for DSP-style workloads such as motor control and video bridging. Four general-purpose PLLs support fractional-N frequency synthesis, programmable phase shift, and clock deskew, simplifying board-level clock trees. The device also offers 4 configuration schemes (AS, AP, FPP, PS) supported via dedicated configuration pins, plus JTAG 1149.1 boundary-scan for production test. The Cyclone IV E architecture uses an SRAM-based configuration cell with a 1.0 mm pitch FBGA-484 (23 x 23 mm) package that supports commercial, industrial, and extended industrial temperature grades. Maximum toggle rates around 472 MHz in combination with LVDS, SSTL, and HSTL I/O standards give the EP4CE75F23C7 strong signal-integrity headroom for parallel buses, DDR2/DDR3 external memory interfaces, and video pixel clocks. Typical applications include industrial machine vision and motor control, broadcast video bridging (HDMI/SDI to parallel RGB), PCIe-over-soft-IP endpoint bridges in edge appliances, factory automation controllers, and high-volume IoT gateways where a low-LE-count FPGA replaces discrete glue logic and microcontrollers. The wide operating range and small FBGA footprint also suit handheld test instruments and security panels. Design considerations: route at least four GND and four VCC12 pins on dedicated layers with a continuous low-impedance power plane; place decoupling as 0.1 uF + 1 uF + 10 uF per VCC12 island and a 10 uF bulk near the regulator; respect the 1.2 V core voltage tolerance (1.16-1.24 V) and program VCCPD banks carefully when mixing 1.8 V, 2.5 V, and 3.3 V I/O. This page combines Intel authoritative specs, distributor pricing as of 2026-09-10, and engineer-facing drop-in alternatives not present in the official device datasheet.

询价 联系我们
EP4CE75F23C7N - 75K LE Cyclone IV E FPGA, 484-FBGA | Intel
EP4CE75F23C7N

EP4CE75F23C7N - 75K LE Cyclone IV E FPGA, 484-FBGA | Intel

The Intel (formerly Altera) EP4CE75F23C7N is a member of the low-power Cyclone IV E FPGA family, delivering 75,408 logic elements, 2,810,880 bits of embedded memory, and 292 user I/Os in a 484-ball FineLine BGA package. Manufactured on a 60 nm TSMC low-power process, it targets cost-sensitive, high-volume applications that demand DSP performance, generous on-chip memory, and rich connectivity without the power budget of a Stratix-class device. The industrial-grade "C7" speed grade is specified for commercial (0C to 85C) junction temperatures and balances timing closure against die cost. A Field-Programmable Gate Array (FPGA) is a reconfigurable digital integrated circuit whose logic fabric, routing, and I/O cells are programmed by the end user after manufacture. The Cyclone IV E family belongs to the broader taxonomy of programmable logic devices (PLD) -> FPGA -> low-cost SRAM-based FPGA -> Intel/Altera low-power Cyclone family. FPGAs sit alongside ASICs, microcontrollers, and ASSPs in digital design, offering hardware-level parallelism and the flexibility to implement custom peripherals, memory controllers, or signal-processing pipelines that fixed-function silicon cannot match. Key features of the EP4CE75F23C7N include up to 4 PLLs for clock synthesis, 266 embedded 18x18 multipliers (approximately 1,062 GMAC/s of DSP throughput), dedicated hardware for LVDS at up to 875 Mbps, and support for external memory interfaces including DDR/DDR2 SDRAM and QDRII SRAM. Configuration is typically loaded through JTAG or active/passive serial flash, and the device is supported by Intel Quartus Prime (the unified replacement for the legacy Altera Quartus II toolchain). Typical applications span industrial motor control and factory automation, video surveillance and image processing, automotive infotainment prototypes, software-defined radio baseband, portable test and measurement, and bridge/aggregation logic on telecom backplanes. The 484-FBGA footprint supports high-density board layouts where hundreds of I/O signals and multiple high-speed transceivers (when paired with external PHY devices) must fan out to memory and connectors. When designing with this part, allocate sufficient PCB area for the 484-ball BGA escape routing (typically 1.0 mm pitch), provide multiple decoupling capacitors near each power pin pair, and follow Intel's PCB layout guidelines for FPGA power rails. Use Intel Quartus Prime for synthesis, place-and-route, timing analysis, and power estimation; the free Quartus Prime Lite edition supports Cyclone IV E devices without a license fee. This page synthesizes distributor inventory, drop-in alternatives from the Cyclone IV E family, and practical design notes not consolidated in any single manufacturer datasheet. Specifications below are sourced from DigiKey, Mouser, Octopart, and the official Intel Cyclone IV Device Handbook as of 2026-09-10.

询价 联系我们
EP4CE75F23C8 - Cyclone IV E FPGA 75K LE 484-FBGA | Intel
EP4CE75F23C8

EP4CE75F23C8 - Cyclone IV E FPGA 75K LE 484-FBGA | Intel

The Intel (formerly Altera) EP4CE75F23C8 is a low-power, low-cost Cyclone IV E field-programmable gate array (FPGA) with 75,408 logic elements, 2,810,880 bits of embedded memory, and 292 user I/O pins, packaged in a 484-ball fine-pitch BGA (FBGA) measuring 23 x 23 mm with a 1.0 mm ball pitch. Built on a 60 nm low-power process and supplied from a 1.2 V core with PLL support, it targets cost-sensitive applications that still need substantial logic density, on-chip RAM, and rich DSP capability. A Cyclone IV E FPGA is a programmable logic device (PLD) belonging to the broader category of SRAM-based FPGAs, which sit within the programmable logic hierarchy (CPLD -> FPGA -> SoC FPGA) and are commonly deployed as glue logic, co-processors, or standalone controllers in embedded designs. Compared with the older Cyclone III family, Cyclone IV E focuses on lower static and dynamic power, while preserving the proven Quartus II design-flow ecosystem. The 'E' suffix denotes the logic-and-memory-optimized sub-family, distinct from the 'GX' sub-family that adds transceivers. Key features include 75,408 logic elements arranged in 4,713 logic array blocks (LABs), 274 embedded 18 x 18 multipliers for DSP, 4 general-purpose PLLs, and 4.5 Mb of embedded SRAM distributed across M9K blocks. The device supports common I/O standards (LVDS, LVCMOS, SSTL, HSTL) up to 3.3 V and offers 292 maximum user I/Os through 8 I/O banks, enabling flexible mixed-voltage interfacing to DDR2/DDR3, parallel buses, and high-speed sensor links. Configuration is supported via passive serial, active serial, fast passive parallel, and JTAG modes. Architecturally, the Cyclone IV E family leverages a 60 nm TSMC process, an 8-input adaptive logic module (ALM) for fine-grained packing efficiency, and dedicated per-LAB clock and control networks. The result is deterministic timing closure with the Quartus II TimeQuest analyzer, plus tight power estimation via the PowerPlay toolchain. Typical applications include industrial motor control and PLCs, video surveillance and image-processing front ends, low-cost software-defined radio baseband, PCIe endpoint bridging, and LED video-wall scan controllers. Designers also use the EP4CE75F23C8 as a system integration hub in factory automation and portable test equipment. A key design consideration is signal integrity on the 1.0 mm-pitch BGA: a 4- to 6-layer PCB with matched-length impedance routing for DDR2 and LVDS pairs is recommended, along with solid power-plane stitching for VCCINT and VCCA. Thermal management at sustained high toggle rates should be evaluated against the FBGA-484 thermal resistance. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet alone.

询价 联系我们