微控制器

产品（18756)

PIC24EP64MC202-I/SO - 70 MIPS 16-bit Motor MCU 64KB Flash SOIC-28
PIC24EP64MC202-I/SO

PIC24EP64MC202-I/SO - 70 MIPS 16-bit Motor MCU 64KB Flash SOIC-28

The Microchip Technology PIC24EP64MC202-I/SO is a 16-bit microcontroller from the PIC24E motor-control family, executing up to 70 MIPS from a 60 MHz internal oscillator while integrating 64 KB (22K x 24) of Flash program memory, 8 KB RAM and a 28-pin SOIC wide-body footprint designed for industrial and automotive motor-control applications. Key specifications include 21 I/O pins, a 3.0 V to 3.6 V single supply rail, four on-chip op-amps, three pairs of PWM channels suited for three-phase or full-bridge drives, and a 10-bit ADC running up to 500 ksps, all wrapped in an industrial -40 C to +85 C operating envelope. A microcontroller (MCU) is a single-chip computer that integrates a CPU core, program and data memory, peripheral interfaces and I/O onto one die. The PIC24E family sits in Microchip's 16-bit dsPIC/PIC24 hierarchy: 16-bit MCU -> dsPIC/PIC24 family -> PIC24E sub-family -> PIC24EP motor-control line -> PIC24EP64MC202 device, with motor-control MCUs distinguished by dedicated PWM, op-amp and ADC peripherals optimised for field-oriented control (FOC) and trapezoidal commutation of PMSM, BLDC and ACIM motors. The PIC24EP64MC202-I/SO delivers dsPIC-like DSP instructions for high-speed sensorless control loops, two high-speed comparators for hardware overcurrent protection, and a 32-bit quadrature encoder interface (QEI) on the larger pin-count siblings. The exposed pad of the SOIC-28 wide-body package provides a low-theta thermal path that is essential when driving power stages continuously at high PWM duty cycles where the MCU is mounted adjacent to the inverter heatsink. Typical applications include three-phase brushless DC (BLDC) and permanent-magnet synchronous motor (PMSM) drives, sensored or sensorless FOC pumps and fans, field-oriented servo amplifiers and small appliance drives, plus industrial stepper drivers using the QEI peripheral. It is also used in e-bike torque controllers, power-tool electronics and small traction inverters below 1 kW where the integrated op-amps simplify current-shunt conditioning. When designing with this MCU, allocate at least two ADC channels for phase-current sensing, route the op-amp outputs close to the ADC inputs to avoid noise pickup, and use the internal FRC with PLL for 60 MIPS operation - an external crystal is not required for most motor-control loops. Leave the exposed pad soldered to a continuous ground plane for thermal dissipation and EMI suppression, and verify the supply rail with a 100 nF decoupling capacitor within 5 mm of each VDD pin. This page synthesises Microchip datasheet parameters, distributor stock, parametric drop-in alternatives and field-tested design notes not collected in any single manufacturer document, giving embedded engineers and buyers a single concise reference for the PIC24EP64MC202-I/SO.

询价 联系我们
PIC24EP64MC202-I/SS - 16-Bit 70 MIPS 64KB Flash Motor MCU | Microchip
PIC24EP64MC202-I/SS

PIC24EP64MC202-I/SS - 16-Bit 70 MIPS 64KB Flash Motor MCU | Microchip

The Microchip PIC24EP64MC202-I/SS is a 16-bit PIC24EP motor-control microcontroller delivering 70 MIPS of CPU performance at up to 60 MHz, integrating 64 KB (22K x 24) of Flash program memory and 8 KB of SRAM in a 28-pin SSOP package. It targets high-performance, precision motor-control systems and combines a high-speed PWM module with on-chip op amps, comparators, and a QEI interface that are essential for field-oriented control (FOC) of three-phase PMSM, BLDC, and AC induction drives. An MCU (microcontroller unit) is a single-chip computer integrating a CPU core, program memory (typically Flash), data memory (SRAM), and a rich set of on-chip peripherals such as timers, ADC, communication controllers, and GPIO. The PIC24EP family extends this concept into the digital-signal-control (DSC) segment with a 16-bit modified Harvard architecture and a single-cycle MAC engine, bridging 8-bit PIC microcontrollers and 32-bit ARM Cortex parts. Within Microchip's taxonomy, the dsPIC33/PIC24EP "MC" family is the motor-control-optimized derivative of the PIC24EP DSC line, distinguished by high-resolution PWM, fast ADC, QEI for shaft feedback, and analog comparators that protect the power stage. Key features include three pairs of complementary PWM outputs (6 PWM channels) with 1.04 ns resolution, a 10-bit ADC with up to 500 ksps conversion, two on-chip operational amplifiers usable as current-sense buffers, three high-speed comparators for cycle-by-cycle overcurrent protection, a Quadrature Encoder Interface (QEI), and a Peripheral Trigger Generator (PTG). The device operates from 3.0 V to 3.6 V across an industrial temperature range of -40 C to +85 C and supports USB, I2C, SPI, and UART interfaces for supervisory or HMI connectivity. Typical applications include sensorless and sensored BLDC/PMSM motor drives (fans, pumps, drones, e-bikes), appliance compressors, small industrial servo drives, robotics, and power tools. Two op-amps on-die directly sense shunt resistors in a three-phase inverter, eliminating external amplifiers and shrinking BOM. The high-resolution PWM and 10-bit ADC in 1 MSPS sampling capability simplify current-loop tuning. When designing with this part, place decoupling capacitors within 3 mm of each VDD/VSS pin pair and route the analog AVdd/AVss pair with a separate ground island tied to digital ground at a single point. Program Flash via ICSP or the device's JTAG boundary-scan interface using MPLAB X IDE and the XC16 compiler. This page combines verified distributor pricing, drop-in pin-compatible alternatives, application-focused design notes, and a parametric comparison table, all curated to extend the manufacturer datasheet with practical engineering insight for procurement and design engineers.

询价 联系我们
PIC24EP64MC202T-E/MM - 60 MIPS 16-bit Motor Control MCU | Microchip
PIC24EP64MC202T-E/MM

PIC24EP64MC202T-E/MM - 60 MIPS 16-bit Motor Control MCU | Microchip

The Microchip Technology PIC24EP64MC202T-E/MM is a 16-bit PIC24E motor-control microcontroller that executes up to 60 MIPS from a 70 MIPS-capable core, integrating 64 KB (22K x 24) of Flash program memory and 4 KB of RAM inside a 28-lead VQFN (6x6 mm, exposed pad) package. The 'T-E' suffix denotes tape-and-reel packaging and an extended automotive temperature grade (-40C to +125C), with AEC-Q100 qualification that targets drivetrain and chassis ECUs. On-chip peripherals include a high-resolution Motor Control PWM module with dedicated PWMs, a 10-bit (typ. 12-bit) ADC, DMA, and standard supervisory functions (POR, WDT, Brown-out Detect/Reset). A 16-bit microcontroller (MCU) is a single-chip computer that combines a CPU, non-volatile program memory, volatile data memory, and a rich set of peripheral IP blocks. In the broader system hierarchy, MCUs sit inside the embedded-systems category alongside microprocessors, DSPs, and FPGAs, and they are the workhorse of motor-control, sensor fusion, and human-machine interface designs. The PIC24E family specifically targets mixed-signal control loops with deterministic interrupt latency and DSP-class arithmetic. The PIC24EP64MC202T-E/MM's key differentiating features are its dedicated Motor Control PWM (with PWM fault inputs and ADC-triggering hardware), a CPU capable of 60 MIPS at 3.3 V typical operation, integrated DMA that offloads data movement from the core, and AEC-Q100 qualification that engineers often require for under-hood and body-electronics subsystems. The device operates from a 3.0 V to 3.6 V single supply and includes multiple communication peripherals (UART, SPI, I2C) plus an ECAN module for automotive networking. Typical applications include BLDC/PMSM motor drives (drones, e-bikes, HVAC fans), automotive actuators (water/oil pumps, electric power steering assist), field-oriented control (FOC) inverters, and high-end general-purpose control where deterministic PWM timing is required. Industrial variants include robotics servo loops, CNC spindle control, and solar micro-inverter stages. When designing with this device, place decoupling capacitors within 3 mm of every VDD/VSS pin pair, allocate a continuous ground plane under the exposed thermal pad, and follow Microchip AN1078 / AN1292 reference designs for FOC implementation. Verify that the VQFN exposed pad is soldered to a thermal pad of at least 25 mm² of 1 oz copper to keep junction temperature within the automotive grade envelope at full CPU load. This page synthesizes distributor pricing, AEC-Q100-qualified drop-in alternatives drawn from the same PIC24EP family, and practical design notes not found in the manufacturer datasheet alone.

询价 联系我们
PIC24EP64MC202T-I/MM - 16-bit 70 MIPS 64KB Flash MCU | Microchip
PIC24EP64MC202T-I/MM

PIC24EP64MC202T-I/MM - 16-bit 70 MIPS 64KB Flash MCU | Microchip

The Microchip Technology PIC24EP64MC202T-I/MM is a 16-bit microcontroller from the PIC24EP family engineered for high-performance digital motor control. Per Microchip product documentation, the device runs up to 70 MIPS at 60 MHz clock speed, integrates 64 KB (22K x 24) of Flash program memory, and is housed in a 28-pin QFN-S package measuring 6 x 6 mm. It operates from a 3.0 V to 3.6 V supply. A 16-bit microcontroller (MCU) is a microprocessor with a 16-bit data path, ALU and bus, sitting within the broader hierarchy of microcontroller -> embedded processor -> semiconductor. The "PIC" family denotes Microchip's proprietary architecture with separate code and data buses (Harvard architecture), and the "dsPIC" / PIC24EP sub-family extends this with DSP-oriented instructions and high-resolution PWM peripherals targeted at power conversion and motor drive applications. Key features include 4 KB of RAM, dedicated motor-control PWM modules with high resolution and dead-time control, multiple general-purpose 16-bit timers, a 12-bit ADC, comparators and communication peripherals (UART, SPI, I2C). The 64 KB Flash is suitable for sophisticated state machines and field-oriented control (FOC) firmware, while the 28-pin QFN-S package offers a compact footprint for space-constrained motor drive boards. Industrial temperature grade (-40C to +85C) and 70 MIPS throughput enable precise real-time torque and speed loops. Typical applications include brushless DC (BLDC) motor drives, permanent magnet synchronous motor (PMSM) controllers, switched-mode power supplies, uninterruptible power systems, and field-oriented control platforms. The PWM + ADC + op-amp integration is the defining strength of the PIC24EP MC family. When designing with this MCU, allocate pin resources carefully: the QFN-28 footprint limits available I/O to roughly 21 general-purpose lines. Use Microchip's MPLAB X IDE and the dsPIC33/PIC24E Motor Control Library to accelerate development. Decouple AVDD with 10 uF + 0.1 uF ceramic capacitors close to the pin.

询价 联系我们
PIC24EP64MC203-E/M5 - 16-Bit 60MIPS MCU 64KB Flash Motor Control | Microchip
PIC24EP64MC203-E/M5

PIC24EP64MC203-E/M5 - 16-Bit 60MIPS MCU 64KB Flash Motor Control | Microchip

The Microchip Technology PIC24EP64MC203-E/M5 is a 16-bit microcontroller from the PIC24EP family engineered for precision motor control and digital power conversion. It integrates a 64 KB (22K x 24) Flash program memory, 8 KB RAM, and runs at up to 60 MIPS, all housed in a compact 36-pin VTLA (5x5 mm) exposed-pad package. The device also includes three on-chip operational amplifiers, four analog comparators, Motor Control PWM (MCPWM), Quadrature Encoder Interface (QEI), and Peripheral Trigger Generator (PTG). A microcontroller (MCU) is a single-chip computer containing a CPU, memory, and programmable peripherals, used to govern embedded system behavior. The PIC24EP64MC203 belongs to the modified Harvard architecture family of 16-bit MCUs from Microchip, sitting under the broader product hierarchy of: PIC24EP -> dsPIC33E/PIC24E -> 16-bit MCU -> microcontroller -> embedded processor -> semiconductor. This device family is purpose-built for high-performance precision motor control applications where DSP-like computational ability combined with deterministic PWM timing is essential. Key features include 70 MIPS dsPIC DSC core capability (in the related dsPIC33EP family), 12-bit ADC with up to 500 ksps, dual analog comparators with programmable reference, three op-amps for current sensing, and 12-bit Motor Control PWM with up to 7 complementary outputs and 184 ps PWM resolution. The integrated op-amps eliminate external signal conditioning for shunt-based FOC motor control loops, while the PTG peripheral enables complex timing sequences without CPU intervention, freeing core bandwidth for control loop math. Architecturally, the device pairs a 16-bit modified Harvard CPU with deterministic interrupt latency, hardware multiply/divide, and DSP instructions inherited from the dsPIC33E family. The 36-VTLA package combines small footprint with exposed thermal pad for direct PCB heat spreading, suitable for compact BLDC controller PCBs. Typical applications include brushless DC (BLDC) motor drives, permanent magnet synchronous motor (PMSM) field-oriented control, switched reluctance motor controllers, power conversion stages, digital PFC controllers, and small industrial drives below 1 kW. The automotive -E (extended) temperature grade suits under-hood and industrial-grade deployments; the -Q1 suffix on related variants adds AEC-Q100 qualification. When designing with this part, allocate the exposed pad to a top-layer copper pour for thermal relief, since 60 MIPS switching dissipates appreciable power during continuous PWM operation. Reserve the three internal op-amps for current sense channels; additional analog conditioning requires external op-amps because no internal spares remain. This page synthesizes distributor pricing, same-package drop-in alternatives, and practical motor-control design notes not found in the manufacturer datasheet.

询价 联系我们
PIC24EP64MC203T-E/TL - 60 MIPS 16-bit MCU 64KB Flash 36-VTLA | Microchip
PIC24EP64MC203T-E/TL

PIC24EP64MC203T-E/TL - 60 MIPS 16-bit MCU 64KB Flash 36-VTLA | Microchip

The Microchip Technology PIC24EP64MC203T-E/TL is a 16-bit PIC24EP microcontroller delivering 60 MIPS performance, 64 KB of Flash program memory (22K x 24) and packaged in a 36-pin VTLA 5x5 mm thermally-enhanced surface-mount module. It belongs to the dsPIC33E/PIC24EP family of microcontrollers and digital signal controllers designed for high-performance precision motor control. The part operates from a 3.0 V to 3.6 V supply, includes AEC-Q100 qualification for automotive use, and exposes on-chip peripherals such as high-speed PWM, motor-control PWM, 12-bit ADC, op-amps and comparators. What is a PIC24EP microcontroller? A 16-bit MCU (microcontroller unit) is an integrated circuit that combines a CPU core, Flash program memory, RAM, and a rich set of on-chip peripherals (ADC, PWM, timers, communication ports) into a single chip. The PIC24EP family from Microchip uses a 16-bit modified Harvard architecture with a 70 MIPS dsPIC DSC variant for digital signal control, an enhanced instruction set with DSP extensions, and is positioned in the broader semiconductor hierarchy: microcontroller -> 16-bit MCU -> PIC24 family -> dsPIC33E/PIC24EP sub-family. It is widely used where deterministic real-time control and signal processing on a single die are required. Key features of the PIC24EP64MC203T-E/TL include 64 KB Flash (22K x 24 instruction words), 4 KB SRAM, 1 KB auxiliary Flash, a 16-bit core running at up to 60 MIPS from a 60 MHz CPU clock, on-chip 12-bit ADC and dual op-amps tuned for current sensing, configurable motor-control PWM (6 channels in 36-pin packages), and automotive-grade qualification (AEC-Q100) plus -40 C to +125 C extended temperature support. Architecturally the device pairs a 16-bit RISC engine with single-cycle MAC, hardware DO/REPEAT loops and a 24-bit instruction word, achieving deterministic interrupt latency. Internal high-speed op-amps remove external analog conditioning for shunt-based current sensing, reducing BOM count and PCB area in motor-drive stages. Typical applications include BLDC and PMSM motor control, field-oriented control (FOC) drives, automotive sensors and actuators, and industrial automation. The integrated op-amps and motor-control PWM make it well suited to FOC commutation loops that close in a few microseconds. For design trade-offs, prefer the PIC24EP64MC203 (non-T) variant for prototype boards in tube/tray form, and select the -E/-I temperature grade for the intended deployment environment. This page synthesizes distributor pricing, drop-in alternative MPNs and practical design notes not bundled in the manufacturer datasheet.

询价 联系我们
PIC24EP64MC204-E/ML - 16-bit 60 MIPS 64KB Flash Motor MCU | Microchip
PIC24EP64MC204-E/ML

PIC24EP64MC204-E/ML - 16-bit 60 MIPS 64KB Flash Motor MCU | Microchip

The Microchip Technology PIC24EP64MC204-E/ML is a 16-bit PIC24E Motor Control microcontroller delivering 60 MIPS of CPU throughput with 64KB of Flash program memory and 4KB of RAM, housed in a 44-pin QFN (8x8 mm) package with an extended -40C to +125C operating temperature range. The device integrates 35 digital I/O lines, dedicated PWM channels for motor control, and a 12-bit ADC, making it purpose-built for precision motor drive and power conversion applications. A 16-bit microcontroller (MCU) is a single-chip computer that uses a 16-bit data path and instruction word to balance deterministic real-time control with reasonable cost and power consumption. Within the broader taxonomy, the PIC24EP64MC204 sits in the 16-bit MCU category, which sits within microcontrollers (MCU), which sit within embedded processors and microcontrollers, which sit within integrated circuits (IC) and finally within semiconductors. The "Motor Control" (MC) family suffix indicates enhanced on-chip peripherals tailored to drive BLDC, PMSM, ACIM, and stepper motors with field-oriented control (FOC) algorithms. Key features include a 60 MIPS dsPIC/PIC24E CPU core, 64KB (22K x 24) self-programmable Flash with ECC, 4KB SRAM, integrated motor-control PWM with up to 6 PWM outputs and 1.04 ns PWM resolution, a 10/12-bit ADC with up to 1.1 Msps sampling rate, and a 32 kHz secondary oscillator for low-power RTC operation. The 44-QFN (8x8) package provides a compact footprint with an exposed pad that enhances thermal dissipation and enables high-density PCB layouts typical of motor drive modules. The PIC24E architecture uses a Harvard-style bus with separate program and data paths, supporting DSP-like MAC operations useful for real-time FOC math. Hardware peripherals such as the Motor Control PWM, quadrature encoder interface (QEI), and high-resolution 1.04 ns PWM duty-cycle adjustment are tightly coupled to the CPU via zero-overhead addressing, allowing deterministic sub-microsecond control loops for sensorless and sensored motor commutation. Typical applications include BLDC and PMSM motor drives (drones, e-bikes, appliances), field-oriented control (FOC) variable-frequency drives, AC-DC and DC-DC power-conversion stages, automotive auxiliary pumps and fans, and industrial servo drives. The wide operating voltage range of 3.0V to 3.6V and AEC-Q100 Grade 0 capability further position the part for harsh industrial and automotive environments. When designing with this device, plan the PCB layout to expose the thermal pad of the 44-QFN to a continuous ground pour; this is essential for the 70 MIPS operation at elevated ambient temperatures. Reserve the MCLR, PGEDx/PGECx, and SOSCI/SOSCO pins as documented to avoid losing debug access via ICSP/ICD. This page synthesizes distributor pricing, drop-in pin-compatible alternatives, and practical design notes for the PIC24EP64MC204-E/ML that are not consolidated in the manufacturer datasheet alone.

询价 联系我们
PIC24EP64MC204-E/MV - 16-Bit 60 MIPS 64KB Motor MCU | Microchip
PIC24EP64MC204-E/MV

PIC24EP64MC204-E/MV - 16-Bit 60 MIPS 64KB Motor MCU | Microchip

The Microchip Technology PIC24EP64MC204-E/MV is a 16-bit 60 MIPS dsPIC/PIC24E family microcontroller optimized for motor control and digital power conversion, integrating 64 KB of Flash program memory (22K x 24), 8 KB of SRAM, and a 48-pin UQFN 6x6 mm package. It carries a 70 MIPS enhanced CPU with DSP engine, on-chip 3-phase Motor Control PWM (MCPWM), Quadrature Encoder Interface (QEI), three operational amplifiers, four high-speed comparators, and a Peripheral Trigger Generator for precise event-based control. The operating voltage range is 3.0 V to 3.6 V and the extended industrial temperature range is -40 C to +125 C. A motor-control MCU is a microcontroller integrated with analog feedback peripherals, timer/capture units, and deterministic PWMs intended to implement Field-Oriented Control (FOC), sinusoidal commutation, and PI current loops in a single chip. In the broader taxonomy, the PIC24EP64MC204 sits in the 16-bit MCU class, below 32-bit Cortex-M devices and above 8-bit PIC16/PIC18 controllers; it belongs to Microchip's dsPIC33/PIC24E family which combines MCU programmability with light DSP throughput for sensorless and sensored motor algorithms. The PIC24E architecture is designed to displace DSP+FPGA motor-control designs with a single deterministic core. Key features include the MCPWM with up to 6 PWM outputs and 1.04 ns PWM resolution, dual 10-bit ADC modules with up to 1.1 Msps aggregate sampling, three on-chip op-amps for current sensing without external amplifiers, four analog comparators with DAC references, and a Peripheral Trigger Generator (PTG) that lets the CPU offload deterministic event sequences. It also integrates a Parallel Master Port (PMP) for graphics or external memory, multiple UART/SPI/I2C interfaces, and a Real-Time Clock Calendar (RTCC) for time-stamping. Typical applications include field-oriented control (FOC) of 3-phase PMSM/BLDC motors in drones, e-bikes, appliances, and industrial drives, single-phase and three-phase PFC power conversion, solar micro-inverters, and digital uninterruptible power supplies. The integrated op-amps and comparators cut BOM cost by eliminating external analog front-ends. When designing with the PIC24EP64MC204-E/MV, allocate a 4-layer PCB with a solid ground pour beneath the exposed pad to keep the -40 C to +125 C junction profile within safe limits. The UQFN-48 has a thermal pad that MUST be soldered to the PCB ground plane for both electrical and thermal performance. Use the MPLAB X IDE with the MPLAB XC16 compiler plus the Motor Control Library (MCLv2) for development.

询价 联系我们
PIC24EP64MC204-E/PT - 70MIPS 16-Bit Motor Control MCU | Microchip
PIC24EP64MC204-E/PT

PIC24EP64MC204-E/PT - 70MIPS 16-Bit Motor Control MCU | Microchip

The Microchip Technology PIC24EP64MC204-E/PT is a 16-bit microcontroller from the PIC24EP motor control family, delivering up to 70 MIPS performance at 60 MHz clock speed with 64 KB of Flash program memory and 8 KB of SRAM, housed in a 44-pin TQFP (10x10 mm) package. It integrates high-speed PWM modules, operational amplifiers, and advanced analog peripherals tailored for high-performance, precision motor control systems that demand energy efficiency, low acoustic noise, extended speed range, and long operational life. A 16-bit microcontroller (MCU) is an embedded processor that combines a CPU, non-volatile program memory, working RAM, and a rich set of on-chip peripherals on a single die, enabling closed-loop digital control of electromechanical systems. Within the broader taxonomy, MCUs sit under microcontrollers -> embedded processors -> semiconductors; the PIC24EP sub-family adds a digital signal controller (DSC) extension that lets the same silicon execute deterministic math for field-oriented control (FOC) of brushless DC, permanent magnet synchronous, and AC induction motors. Key features of the PIC24EP64MC204-E/PT include dedicated motor-control PWM outputs with 7.5 ns resolution, integrated operational amplifiers for current sensing, 12-bit ADC converters with dual sample-and-hold, comparators, CAN communication, and a 16-bit data path. The "-E" suffix denotes the -40 °C to +125 °C extended industrial temperature grade suitable for harsh-environment motor drive designs. Architecturally, the device uses a modified Harvard CPU with a 16-bit instruction word, hardware multiply/divide, and zero-overhead loop control, which accelerates the FOC math used in modern variable-frequency drives. The on-chip op-amps eliminate external signal-conditioning stages, reducing BOM cost and PCB area in three-phase inverter designs. Typical applications include brushless DC motor controllers, field-oriented control drives for industrial automation, HVAC compressors, electric vehicle auxiliary pumps, robotic actuators, and servo position controllers. The wide operating voltage range and integrated analog front end make it a strong fit for sensored and sensorless BLDC/PMSM systems. When designing with this device, allocate enough board space for the 44-pin TQFP footprint and follow Microchip's motor-control reference design layouts to keep high-current switching traces away from the analog op-amp inputs, preserving current-sense accuracy. This page synthesizes distributor pricing, same-family drop-in alternatives, and practical motor-control design notes not found in the manufacturer datasheet alone.

询价 联系我们
PIC24EP64MC204-E/TL - 16-Bit 70MIPS Motor Control MCU | Microchip
PIC24EP64MC204-E/TL

PIC24EP64MC204-E/TL - 16-Bit 70MIPS Motor Control MCU | Microchip

The Microchip Technology PIC24EP64MC204-E/TL is a 16-bit, 70 MIPS dsPIC/PIC24E motor-control microcontroller with 64 KB Flash and 8 KB RAM, packaged in a 44-pin TQFP-style TL (VTLA-44) package. It operates from 3.0 V to 3.6 V, runs up to 60 MHz with 70 MIPS throughput, and offers 83 I/O ports for high-pin-count motor, power-conversion, and digital-signal-conditioning applications. On-chip peripherals include high-speed PWM (MCPWM), quadrature encoder interface (QEI), 4 analog comparators, 3 op-amps, a 12-bit A/D converter (ADC), and the configurable Peripheral Trigger Generator (PTG) for offloading timing-critical tasks from the CPU. A 16-bit microcontroller (MCU) is a programmable processor core with at least a 16-bit data path, embedded Flash program memory, on-chip RAM, peripherals (timers, PWM, ADC, communication ports), and interrupt logic. The PIC24E family sits in the hierarchy: 16-bit MCU -> modified Harvard architecture MCU -> microcontroller -> embedded processor. The 'PIC24EP' sub-family targets motor-control and digital-power applications with deterministic PWM and analog-front-end integration; the 'MC' infix explicitly indicates motor-control on-chip resources. Key features include 64 KB self-programmable Flash program memory (22K x 24 words), 8 KB SRAM, three 16-bit timers plus configurable PTG, nine 16-bit capture inputs, hardware quadrature encoder interface, USB 2.0 full-speed OTG, four analog comparators with rail-to-rail inputs, three on-chip operational amplifiers for current sensing, a 12-bit A/D converter capable of up to 1.1 Msps, and an extended temperature (-40 C to +125 C) 'E' industrial grade. The device also includes a JTAG port for boundary scan and an ICD (In-Circuit Debugger) interface. Internally, the PIC24E core uses a 16-bit modified Harvard architecture with a 24-bit instruction word and DSP-aware ALU supporting MAC operations. The architecture supports C-compiler-friendly addressing and runs the same instruction stream as the dsPIC33E DSC line, enabling code portability across motor-control and DSP applications. The integrated op-amps and comparators form a complete analog front-end for current-sense, back-EMF, and over-current protection directly at the MCU pin. Typical applications include BLDC and PMSM motor drives (FOC and trapezoidal commutation), sensored or sensorless fan and pump controllers, switched-mode power supplies (PFC + LLC), digital illumination ballasts, industrial servo drives, and any 3-phase inverter requiring tight deterministic PWM-to-current-loop latency. The wide 83-I/O count and PTG enable sophisticated mixed-signal control loops. When designing with this part, allocate dedicated PCB area for the exposed thermal pad (if present), place 100 nF decoupling on every VDD/AVDD pin pair, and reserve analog ground islands for the on-chip op-amp feedback networks. The PTG timer chain must be configured before enabling peripheral triggers to avoid race conditions. This page synthesizes distributor stock, parametric drops, and practical motor-control design notes not found on the bare device datasheet.

询价 联系我们
PIC24EP64MC204-I/ML - 16-Bit 70 MIPS Motor Control MCU | Microchip
PIC24EP64MC204-I/ML

PIC24EP64MC204-I/ML - 16-Bit 70 MIPS Motor Control MCU | Microchip

The Microchip Technology PIC24EP64MC204-I/ML is a 16-bit, 70 MIPS PIC24EP Motor Control microcontroller featuring 64KB (22K x 24) of Flash program memory in a 44-pin QFN (8x8 mm) package with exposed thermal pad. Operating at up to 70 MIPS from a 3.0V to 3.6V supply, the device integrates enhanced on-chip peripherals including high-speed PWM modules, multiple UART/SPI/I2C interfaces, and a 10-bit ADC tailored for precision motor-control systems. A 16-bit microcontroller (MCU) is a single-chip computer that executes instructions 16 bits at a time, offering higher code density, faster arithmetic, and richer peripheral integration than 8-bit predecessors. The PIC24EP family sits within Microchip's dsPIC33/PIC24E high-performance tier, bridging general-purpose control and DSP-class math. Within the broader taxonomy: 16-bit MCU -> microcontroller -> embedded processor -> semiconductor. Motor-control MCUs add specialized PWM, ADC sampling, and quadrature encoder interfaces beyond what general-purpose 16-bit parts provide. Key features of the PIC24EP64MC204-I/ML include 64KB Flash / 8KB RAM, 70 MIPS CPU speed (verified by the 70MIPs spec; 60 MHz core clock on datasheet), 27 general-purpose timers, multiple communication peripherals (UART, SPI, I2C), and motor-control-specific high-resolution PWM outputs suitable for three-phase inverter drive. The device is offered in the industrial temperature grade (-40C to +85C). Typical applications include BLDC motor control, PMSM field-oriented control (FOC), sensored/sensorless fan and pump drives, HVAC compressor control, small appliance motor drives, and industrial servo drive stages. The integrated high-speed PWM and ADC combine to support current-loop sampling with deterministic latency, a critical requirement for high-bandwidth torque control. When designing with this device, allocate PCB ground copper directly under the exposed thermal pad (EP) of the 44-QFN package, solder it to a sufficient pad area, and route analog/digital grounds per Microchip's recommended PCB layout. The -I/ML suffix denotes industrial operating temperature range (-40C to +85C) and the 44-QFN package. This page consolidates distributor pricing as of 2026-09-29, pin-compatible drop-in alternatives within the PIC24EP/dsPIC33 family, and practical motor-control design notes that supplement the manufacturer datasheet for embedded engineers.

询价 联系我们
PIC24EP64MC204-I/MV - 16-Bit 70MIPS MCU Motor Control 64KB Flash UQFN-48
PIC24EP64MC204-I/MV

PIC24EP64MC204-I/MV - 16-Bit 70MIPS MCU Motor Control 64KB Flash UQFN-48

The Microchip Technology PIC24EP64MC204-I/MV is a 16-bit, 70 MIPS dsPIC33/PIC24EP-class microcontroller purpose-built for high-performance digital motor control. The device integrates 64 KB (22K x 24 instruction words) of flash program memory, 8 KB of SRAM, and a 48-pin UQFN (MV) package with 6 mm x 6 mm body and exposed pad, paired with an extended industrial operating temperature range of -40C to +85C. Core peripherals include a dedicated Motor Control PWM (MCPWM) module with up to 8 PWM channels and a Quadrature Encoder Interface (QEI) block, three on-chip operational amplifiers (3 OpAmp), four analog comparators (4 Comp) for back-EMF and current sensing, and a Peripheral Trigger Generator (PTG) for hardware event sequencing. A digital signal controller (DSC) is a microcontroller with a deterministic DSP engine tightly coupled to standard MCU features. PIC24EP-family parts extend the PIC24F baseline by adding a 16-bit dsPIC-style DSP engine, hardware multiply/accumulate, and DSP-aware interrupt routing, while preserving the PIC24 instruction set for code reuse. Within Microchip's MCU taxonomy, PIC24EP sits between PIC24F (general-purpose 16-bit) and dsPIC33 (DSP-focused), targeting motor control, power conversion, and high-performance sensor interfaces that need deterministic control loops at 70 MIPS. Key differentiating features include 70 MIPS core performance with single-cycle MAC, MCPWM with edge-aligned and center-aligned modes, dedicated QEI for BLDC/PMSM rotor tracking, integrated op-amps that eliminate external analog front-ends for FOC current sensing, and four high-speed comparators supporting hardware fault protection. PTG provides configurable hardware state machines for deterministic event triggering without CPU intervention. The 48-UQFN (6x6) package with exposed thermal pad supports efficient heat dissipation in compact field-oriented control (FOC) and trapezoidal commutation designs. Architecture details: PIC24EP64MC204 uses the PIC24E core with Harvard bus architecture, 16-data-bit paths, 24-bit instruction words, and a tightly-coupled DSP engine. Three op-amps connect directly to ADC inputs, while four comparators feed the PWM fault input. The combination enables single-chip sensorless and sensored FOC loops for BLDC, PMSM, ACIM, and switched reluctance drives. The MEMS supplies thermal monitoring; the 3.3V core operates from a single 3.0-3.6V supply. Typical applications include brushless DC (BLDC) motor drives for industrial fans and pumps, permanent magnet synchronous motor (PMSM) control in white goods and e-mobility, field-oriented control (FOC) inverter stages, robotic servo drives, drone ESCs, and digital power conversion. The integrated analog peripherals are particularly valuable where PCB area and BOM cost must be minimized without sacrificing loop bandwidth. The AEC-Q100 -I grade targets industrial-grade operating environments; automotive customers should consult Microchip's AEC-Q100-qualified PIC24 variants. Designers should plan for adequate PCB thermal dissipation via the exposed pad, route sensitive analog op-amp inputs away from PWM traces, and use Microchip's MPLAB X IDE with the XC16 compiler for firmware development. The 48-UQFN footprint is shared with PIC24EP64MC202/203 and PIC24EP64GP204 variants, simplifying platform migration across memory and feature tiers.

询价 联系我们
PIC24EP64MC204-I/PT - 70 MIPS 16-bit Motor Control MCU | Microchip
PIC24EP64MC204-I/PT

PIC24EP64MC204-I/PT - 70 MIPS 16-bit Motor Control MCU | Microchip

The Microchip Technology PIC24EP64MC204-I/PT is a high-performance 16-bit microcontroller from the PIC24EP family, featuring a 70 MIPS (Million Instructions Per Second) CPU core, 64 KB of Flash program memory and 8 KB of RAM, housed in a 44-pin TQFP (10x10 mm) package. The device integrates an enhanced motor-control PWM (MCPWM), a Quadrature Encoder Interface (QEI), three on-chip op-amps, four analog comparators, and a Peripheral Trigger Generator (PTG) — features that target precision motor-drive, power-conversion and digital-power applications. A PIC microcontroller (Microcontroller Unit, MCU) is a single-chip computer that integrates a CPU, memory (Flash for code, SRAM for data) and a rich set of peripherals such as timers, ADCs, communication interfaces, and PWM channels. PIC24E "enhanced" devices extend the classic PIC24 architecture with higher CPU throughput, more DMA channels and additional analog. The PIC24EP sub-family is further tuned for motor control and digital power, where deterministic PWM timing and fast ADC sampling close the current/torque loop on field-oriented control (FOC) algorithms. Key features of the PIC24EP64MC204-I/PT include up to 70 MIPS operation from a 60 MHz peripheral clock, 64 KB self-write Flash, 8 KB SRAM, 35 I/O pins, an integrated 10/12-bit ADC, three op-amps usable for current sensing, four high-speed comparators with PWM fault inputs, and a 70 MHz PWM module with up to 8 outputs. The device operates from 3.0 V to 3.6 V, supports -40 °C to +85 °C industrial temperature range, and is RoHS compliant. Typical applications include brushless DC (BLDC) and permanent-magnet synchronous motor (PMSM) field-oriented control, switched-mode power supplies (SMPS), uninterruptible power supplies (UPS), induction-cooking drivers, and HVAC compressor control. The combination of on-chip analog (op-amps + comparators) and the high-resolution PWM dramatically reduces the BOM for a complete sensorless or sensored FOC drive. When designing with this device, verify the pinout against the datasheet diagram for your specific package (TQFP-44) and ensure that the keep-out area under the exposed thermal pad (if present) is correctly soldered for thermal performance. The PTG peripheral can offload simple tasks from the CPU and should be considered for deterministic timing in safety-critical loops. This page synthesizes distributor pricing, drop-in alternatives and practical design notes not found in the manufacturer datasheet alone, giving engineers a single-page decision aid for selecting and sourcing the PIC24EP64MC204-I/PT.

询价 联系我们
PIC24EP64MC204-I/TL - 70 MIPS 16-bit Motor Control MCU | Microchip
PIC24EP64MC204-I/TL

PIC24EP64MC204-I/TL - 70 MIPS 16-bit Motor Control MCU | Microchip

The Microchip PIC24EP64MC204-I/TL is a 16-bit 70 MIPS Digital Signal Controller (DSC) optimized for high-performance motor control, housed in a 44-pin TQFP (10x10 mm) package. It integrates 64 KB of Flash program memory, 8 KB of RAM, a 70 MIPS enhanced Harvard architecture core, and on-chip operational amplifiers targeting precision motor control loops. The 60 MHz system clock with 70 MIPS throughput enables high-frequency PWM generation required for field-oriented control of PMSM, BLDC, and AC induction motors. A DSC (Digital Signal Controller) is a hybrid class of microcontrollers that combines the deterministic interrupt response of an MCU with the multiply-accumulate throughput of a DSP. In the broader taxonomy, the PIC24EP64MC204 sits between a microcontroller and a DSP - more deterministic than a Cortex-M4 MCU but easier to program than a dedicated DSP. Its motor-control optimized peripherals (high-speed PWM, quadrature encoder interface, op amps, and 12-bit ADC at 1.1 Msps) reduce external component count and BOM cost. Key features include 9 general-purpose 16-bit timers (with 27 total timer channels), high-speed PWM with up to 1.04 ns resolution, 83 I/O pins, and a supply voltage range of 3.0V to 3.6V. The PIC24EP family also integrates USB 2.0 FS/OTG, CAN, and 12-bit A/D converter peripherals that simplify inverter and sensor-feedback designs. Typical applications include field-oriented control (FOC) of brushless DC motors, sensorless PMSM drive, industrial servo control, HVAC compressor drives, and consumer appliance motor management. The internal op amps are typically used to amplify current-sense signals from shunt resistors in the inverter stage. When designing with this device, ensure decoupling capacitors are placed close to the VDD/VSS pairs and follow Microchip's reference design PCB layout to minimize PWM-edge noise coupling into the analog front-end. Programming is supported through MPLAB X IDE and the dsPIC33E/PIC24E peripheral library.

询价 联系我们
PIC24EP64MC204T-E/ML - 60 MIPS 16-bit Motor Control MCU | Microchip
PIC24EP64MC204T-E/ML

PIC24EP64MC204T-E/ML - 60 MIPS 16-bit Motor Control MCU | Microchip

The Microchip Technology PIC24EP64MC204T-E/ML is a 16-bit microcontroller from the PIC24EP family, engineered for high-performance precision motor control. It delivers 60 MIPS throughput from a 60 MHz CPU core, integrates 64 KB of Flash program memory organized as 22K x 24, and includes 8 KB of RAM. The device is housed in a 44-pin VQFN (8x8 mm) package with an exposed pad, qualified to the AEC-Q100 automotive standard for Grade -40C to +125C operation. A 16-bit PIC microcontroller is a RISC-based MCU that uses a modified Harvard architecture with separate program and data paths, allowing simultaneous instruction fetch and operand access. Within the broader taxonomy, PIC24EP MCUs sit at the top of the 16-bit PIC24 family; they descend from the 8-bit PIC16/PIC18 line and precede the 32-bit PIC32MZ/PIC32MX families. They are widely used for embedded control loops where deterministic interrupt response and DSP-class math performance are required. Key features include on-chip motor-control peripherals such as a Motor Control PWM (MCPWM) module with up to six PWM outputs, a Quadrature Encoder Interface (QEI), three operational amplifiers for current sensing, four high-speed comparators, and a Peripheral Trigger Generator (PTG) for hardware event sequencing. The integrated 10-bit/12-bit ADC supports up to nine analog channels, enabling simultaneous phase-current sampling for field-oriented control (FOC) loops. The 16-bit DSP engine executes MAC instructions in a single cycle, supporting advanced algorithms such as sensorless FOC, DTC, and space-vector modulation. Typical applications span BLDC/PMSM motor drives (drones, e-bikes, automotive fans and pumps), industrial servo control, HVAC fans, and home-appliance inverters. The AEC-Q100 qualification also makes the device suitable for under-the-hood automotive body and powertrain ECUs where Grade 1 temperature ranges are required. The combination of analog front-end (op-amps, comparators, ADC) and dedicated PWM/QEI peripherals dramatically reduces external BOM and PCB footprint. When designing with the PIC24EP64MC204T-E/ML, note that the 44-VQFN exposed pad must be soldered to a sufficient copper thermal area to keep junction temperature within spec at 60 MIPS with all peripherals active. Decouple VDD with 100 nF + 10 uF close to the pins, place the op-amp feedback networks within 5 mm of the OPA pins to limit noise pickup, and use the PTG to offload time-critical events from the CPU core. This page synthesizes distributor pricing, AEC-Q100 cross-reference options, and practical motor-control design notes that are not collected in the manufacturer datasheet alone.

询价 联系我们
PIC24EP64MC204T-E/TL - 16-bit 60 MIPS 64KB Flash Motor MCU | Microchip
PIC24EP64MC204T-E/TL

PIC24EP64MC204T-E/TL - 16-bit 60 MIPS 64KB Flash Motor MCU | Microchip

The Microchip Technology PIC24EP64MC204T-E/TL is a 16-bit PIC24EP motor-control microcontroller delivering 60 MIPS core performance, 64 KB (22K x 24) of Flash program memory, and 4 KB of RAM in a 44-pin VTLA (6x6 mm) surface-mount package with exposed pad. Operating from 3.0 V to 3.6 V, it targets high-performance motor-control, digital-power, and precision-drive designs. A microcontroller (MCU) is an integrated circuit that combines a CPU core, program memory (Flash/ROM), data memory (RAM), and on-chip peripherals (timers, ADC, PWM, communication, GPIO) into a single chip. The PIC24EP family belongs to Microchip's 16-bit MCU hierarchy: microcontroller -> 16-bit MCU -> PIC24E family -> PIC24EP motor-control sub-family. Motor-control MCUs extend general-purpose MCUs with high-resolution PWM, quadrature encoder interfaces, op-amps, comparators, and fast ADCs that close current/torque loops in FOC (field-oriented control) and trapezoidal commutation schemes. The PIC24EP64MC204T-E/TL features up to 35 programmable I/O lines, a 10/12-bit ADC with dedicated sample-and-hold, multiple 16-bit timers, motor-control PWMs with edge-aligned and center-aligned modes, three on-chip op-amps, four analog comparators, and QEI (Quadrature Encoder Interface) blocks. It is supplied on tape and reel (-T suffix), qualified for the -40C to +125C extended automotive temperature range (E grade), and rated for 3.0-3.6 V single-supply operation. Typical applications include brushless DC (BLDC) and permanent-magnet synchronous motor (PMSM) field-oriented control, 3-phase inverter drives, HVAC blower and compressor control, drone and robotics propulsion, industrial servo drives, and switched-mode power-supply digital control loops. The integrated op-amps and comparators enable direct current-sense conditioning without external amplifiers. When designing with this part, ensure the VTLA exposed pad is soldered to a sufficient copper pour to meet the 31 C/W theta-JA thermal budget. The internal 7.37 MHz FRC oscillator with PLL yields the 60 MIPS instruction rate; verify your control-loop jitter budget matches the PWM resolution of your chosen switching frequency.

询价 联系我们
PIC24EP64MC204T-I/ML - 16-Bit 70 MIPS 64KB Flash MCU | Microchip
PIC24EP64MC204T-I/ML

PIC24EP64MC204T-I/ML - 16-Bit 70 MIPS 64KB Flash MCU | Microchip

The Microchip Technology PIC24EP64MC204T-I/ML is a 16-bit PIC24E-family microcontroller with 70 MIPS CPU performance, 64 KB of Flash program memory and 8 KB of RAM, housed in a 44-pin QFN (8x8 mm) package. It targets precision motor-control and digital-signal-control applications with on-chip high-resolution PWM, advanced analog peripherals and a 60 MHz system clock with instruction-execution throughput up to 70 MIPS. What is a 16-bit microcontroller? A microcontroller (MCU) is a single-chip computer integrating a CPU core, program memory (Flash, Flash), data memory (RAM), peripherals and I/O. The 16-bit class sits between 8-bit devices (e.g. PIC16/PIC18) and 32-bit ARM Cortex-M parts, offering higher MIPS, larger address space and DSP-friendly instructions at lower cost than 32-bit. PIC24E sits in Microchip's dsPIC/PIC24 hierarchy as a high-performance 16-bit MCU for motor control and DSP. Key features include 64 KB (22K x 24) Flash, 8 KB RAM, 35 general-purpose I/O, multiple UART/SPI/I2C interfaces, an enhanced motor-control PWM module, a 10-bit ADC with up to 1 Msps, and a 3.0 V to 3.6 V single-supply operating range. The 44-pin QFN-EP package provides a low-thermal-resistance exposed pad for dissipating motor-drive-stage heat. The device supports industrial temperature grade -40C to +85C. Architecturally, the PIC24EP64MC204 uses a modified Harvard architecture with 24-bit instruction words and 16-bit data paths, hardware MAC for DSP operations, and dedicated motor-control PWM with high-resolution edge placement. Internal PLLs and oscillator flexibility allow trade-offs between CPU speed and peripheral timing. The advanced analog includes multiple ADC sample-and-hold channels suitable for back-EMF and current sensing. Typical applications include 3-phase BLDC and PMSAC drives, field-oriented control (FOC) motor systems, industrial inverters, digital power conversion, sensorless motor control, and USB-equipped embedded control nodes. The high-resolution PWM and fast ADC make the part a strong fit for sensorless FOC on small to mid-size motors. When designing with this device, place 100 nF decoupling on every VDD pin and connect the QFN exposed pad to a continuous ground plane with multiple thermal vias; this is mandatory for thermal dissipation in motor drive stages. The on-chip debug interface (PGDx/PGECx) requires no special programming voltage. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet alone.

询价 联系我们
PIC24EP64MC204T-I/PT - 16-bit 70 MIPS 64KB Flash MCU | Microchip
PIC24EP64MC204T-I/PT

PIC24EP64MC204T-I/PT - 16-bit 70 MIPS 64KB Flash MCU | Microchip

The Microchip Technology PIC24EP64MC204T-I/PT is a 16-bit PIC24E microcontroller IC delivering 70 MIPS performance from 64KB (22K x 24) of Flash program memory, packaged in a 44-pin TQFP (PT) 10x10 mm with 1.0 mm height. It integrates high-speed motor-control peripherals, including a Motor Control PWM (MCPWM), Quadrature Encoder Interface (QEI), three operational amplifiers and four analog comparators optimized for closed-loop drive stages. A microcontroller (MCU) is a single-chip computer that combines a CPU core, volatile and non-volatile memory, digital I/O and a rich set of analog and communication peripherals on one die. The PIC24E family extends this concept with a 16-bit modified-Harvard core, DSP engine, and dedicated peripherals targeting power conversion and motor control. Within the broader semiconductor taxonomy, an MCU belongs to microcontrollers > integrated circuits > semiconductors, sitting between 8-bit MCUs (PIC10/12/18) and 32-bit Cortex-M devices in capability and complexity. Key features of the PIC24EP64MC204T-I/PT include 70 MIPS operation at 60 MHz CPU clock, 8KB SRAM, a 12-bit ADC (up to 1.1 Msps per the device family), 3 op-amps with programmable gain, 4 high-speed comparators with DAC references, and a Peripheral Trigger Generator (PTG) for hardware-event sequencing. The device operates from a 3.0 V to 3.6 V supply with on-chip voltage regulation, and is offered in the industrial -40 °C to +85 °C temperature range. The architecture centers on a 16-bit DSP-enhanced CPU with single-cycle multiply and hardware divide, supported by a 7-channel DMA controller that offloads peripheral transactions. The integrated op-amps and comparators close the current-sense feedback path inside the chip, eliminating external analog front-ends for field-oriented control (FOC) of PMSM/BLDC motors, while the PTG synchronizes ADC sampling with PWM edges for deterministic control loops. Typical applications include sensorless and sensored BLDC/PMSM motor drives, field-oriented control inverters, ceiling-fan and pump controllers, RC servo drives, and digital power-conversion stages. Its combination of analog integration and DSP throughput makes it well suited for compact, energy-efficient motor control. When designing with this device, allocate the 44-pin TQFP footprint with sufficient ground copper under the exposed thermal pad and route the analog op-amp inputs as short differential pairs. For FOC, configure the PTG to trigger ADC sampling aligned with the PWM center, and use the QEI inputs to capture rotor position with the dedicated filter pins. This page synthesizes distributor pricing, drop-in alternatives within the same TQFP-44 package, and practical design notes that complement the manufacturer datasheet.

询价 联系我们
PIC24EP64MC206-E/MR - 16-Bit 60MIPS 64KB Flash MCU | Microchip
PIC24EP64MC206-E/MR

PIC24EP64MC206-E/MR - 16-Bit 60MIPS 64KB Flash MCU | Microchip

The Microchip Technology PIC24EP64MC206-E/MR is a 16-bit Digital Signal Controller (DSC) from the PIC24EP family, delivering 60 MIPS performance from a 64-pin VQFN (9x9 mm) package with 64KB of Flash program memory (22K x 24) and AEC-Q100 automotive qualification. According to the Microchip product page, this device belongs to the 70 MIPS-capable PIC24EP motor control family and integrates enhanced on-chip peripherals tailored for high-performance, precision motor control applications. A Digital Signal Controller (DSC) is a hybrid component that combines the deterministic interrupt response of a microcontroller with the mathematical throughput of a Digital Signal Processor (DSP). The PIC24EP family is part of the broader dsPIC/PIC24EP 16-bit microcontroller hierarchy, which sits between 8-bit PIC MCUs and 32-bit ARM Cortex-M devices in Microchip's portfolio. The 'MC' suffix designates the Motor Control variant, while 'GP' designates General Purpose variants in the same family. Key features include 60 MIPS (70 MIPS for select members) execution from a modified Harvard architecture, 64KB Flash with self-programmability, up to 8KB RAM, dedicated Motor Control PWM modules with high-resolution duty-cycle control, multiple 10/12-bit ADCs with high-speed conversion, op amps for current sensing, and a wide operating voltage range suitable for both 3.3V and 5V systems. The -E temperature grade extends the operating range to -40C to +125C for harsh-environment deployments. Typical applications include BLDC and PMSM motor drives, field-oriented control (FOC) systems, sensorless motor control, industrial automation drives, automotive HVAC blowers, e-bike and e-scooter traction control, and power conversion systems. The integrated op amps eliminate external current-sense amplifiers, reducing BOM cost and PCB area in compact motor-drive designs. When designing with this device, plan the PCB layout around the exposed thermal pad of the VQFN-64 package, which must be soldered to a thermal via array to keep junction temperature within limits at full 60 MIPS operation. Use Microchip's MPLAB X IDE with the XC16 compiler and dsPIC/PIC24 DSP Library for math-intensive routines.

询价 联系我们
PIC24EP64MC206-E/PT - 16-bit 60 MIPS 64KB Flash Motor MCU | Microchip
PIC24EP64MC206-E/PT

PIC24EP64MC206-E/PT - 16-bit 60 MIPS 64KB Flash Motor MCU | Microchip

The Microchip Technology PIC24EP64MC206-E/PT is a 16-bit microcontroller from the PIC24EP motor-control family, delivering 60 MIPS performance and 64 KB of Flash program memory in a 64-pin TQFP (10x10 mm) package. The part integrates dedicated motor-control peripherals (MCPWM, QEI), three on-chip op-amps, four analog comparators, and a Peripheral Trigger Generator (PTG), enabling compact high-performance motor-drive designs. A 16-bit microcontroller (MCU) is a microprocessor core with 16-bit-wide data paths, registers, and ALU operations, sitting between 8-bit MCUs (low cost, low performance) and 32-bit MCUs (high performance, complex software stacks). 16-bit MCUs are widely used in motor control, power conversion, and industrial sensing because they balance deterministic interrupt latency, rich analog peripherals, and code density. PIC24E devices belong to the Digital Signal Controller (DSC) family - essentially a 16-bit MCU plus DSP engine and high-resolution PWM, classified within Microcontrollers > Integrated Circuits in the broader semiconductor taxonomy. Key features include 8 KB RAM, a 16-bit timer/counter set, 12-bit ADC with up to 1.1 Msps conversion, 5V-tolerant I/O, and an extended operating temperature range of -40C to +125C for industrial environments. The dedicated motor-control PWM module supports complementary outputs, dead-time insertion, and center-aligned switching frequencies commonly needed for field-oriented control (FOC) and trapezoidal commutation. The three integrated op-amps can condition shunt currents directly on-chip, eliminating external current-sense amplifiers. Typical applications include BLDC/PMSM motor drives, industrial servo control, HVAC compressors, e-bike controllers, drones and robotics. The integrated op-amps, comparators, and QEI make it well suited to sensorless and sensored FOC of three-phase motors at switching frequencies of 20 kHz and beyond. Designers should verify that supply decoupling (100 nF + 10 uF bulk) is placed close to the AVDD/VDD pins, and that unused op-amp outputs are tied off per the datasheet. The E temperature grade indicates -40C to +125C operation. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet.

询价 联系我们
PIC24EP64MC206-I/MR - 16-Bit 70MIPS MCU 64KB Flash Motor Control | Microchip
PIC24EP64MC206-I/MR

PIC24EP64MC206-I/MR - 16-Bit 70MIPS MCU 64KB Flash Motor Control | Microchip

The Microchip PIC24EP64MC206-I/MR is a 16-bit high-performance Digital Signal Controller (DSC) from the PIC24E family, optimized for precision motor-control applications, delivering up to 70 MIPS through a 60 MHz CPU core (3.0-3.6V operation) with 64KB Flash (22K x 24) and 8KB RAM. The device is housed in a 64-pin VQFN (MR, 9x9 mm) package with exposed pad and provides up to 53 general-purpose I/O plus dedicated motor-control peripherals including a high-resolution PWM module, three op-amps, and three comparators integrated on-chip. A Digital Signal Controller (DSC) such as this PIC24EP part is a hybrid between a microcontroller (MCU) and a digital signal processor (DSP) - it pairs a deterministic 16-bit MCU-style core with DSP-class multiply-accumulate and barrel-shifter instructions, making it ideal for closed-loop control loops that must execute PID math every PWM cycle. Within the broader taxonomy it sits at MCU -> 16-bit MCU -> DSC -> motor-control DSC -> embedded computing IC -> semiconductor. The PIC24E architecture is enhanced over the prior PIC24F family with dual-port SRAM and a 70 MIPS core that lets designers oversample current or run sensorless field-oriented control (FOC) without offloading to a dedicated DSP. Key features include three on-chip op-amps configurable as current-sense amplifiers, three high-speed analog comparators with PWM fault input, a 10-bit ADC with up to 1.1 Msps and 24 analog inputs, six 16-bit timer/counters, a USB 2.0 full-speed On-The-Go (OTG) interface, and configurable logic cells. The PWM module supports center-aligned, edge-aligned, push-pull and multi-phase modes with 7.14 ns PWM resolution, supporting both brushed DC and three-phase brushless DC (BLDC) or permanent-magnet synchronous motor (PMSM) drives up to 24V rails typical. Typical applications include field-oriented control of three-phase PMSM/BLDC motors in drones, e-bikes, home appliances, ceiling fans and pumps; sensorless or sensored sinusoidal commutation; brushed DC motor control in robotics and small appliances; and any closed-loop motion-control system requiring simultaneous ADC sampling, PID math and PWM update in a single deterministic core. The integrated op-amps directly interface to low-side shunt current-sense resistors, eliminating external instrumentation amplifiers and shrinking the BOM. When designing with this device, allocate PCB copper area under the exposed thermal pad for heat spreading, place the three op-amp inputs in star-ground configuration, and decouple VDD/VSS pairs with 100 nF + 4.7 µF capacitors close to each pin pair. Programming is supported by MPLAB X IDE with the XC16 compiler and the dsPIC DSC Motor Control Library. This page synthesizes distributor pricing, drop-in alternatives and practical design notes not found in the standalone manufacturer datasheet.

询价 联系我们
PIC24EP64MC206T-E/PT - 16-bit 60 MIPS 64KB Flash Motor MCU
PIC24EP64MC206T-E/PT

PIC24EP64MC206T-E/PT - 16-bit 60 MIPS 64KB Flash Motor MCU

The Microchip Technology PIC24EP64MC206T-E/PT is a high-performance 16-bit microcontroller from the PIC24EP Motor Control family, featuring a 60 MIPS CPU core, 64KB of Flash program memory (22K x 24 words), and 4KB of RAM in a 64-pin TQFP (10x10 mm) package. It integrates a 60 MHz oscillator with PLL support, USB 2.0 full-speed On-The-Go, and a 10-bit ADC, making it suitable for advanced motor control and digital signal processing tasks. The 'T' suffix denotes Tape & Reel packaging, and the 'E' suffix indicates the extended (-40C to +125C) operating temperature range with AEC-Q100 automotive qualification. A PIC (Peripheral Interface Controller) microcontroller is a family of flash-programmable Harvard-architecture microcontrollers built around a 16-bit modified-RISC core. Within the semiconductor hierarchy, a PIC24EP falls under the broader category of 16-bit MCUs -> microcontrollers -> embedded processors -> semiconductors. The 'EP' designation indicates the Enhanced Performance family with a 16-bit data path, single-cycle hardware MAC (multiply-accumulate) for DSP operations, and the dsPIC33E instruction set extension that enables efficient digital signal processing without external DSP chips. Key features include high-speed PWM (12.5 ns resolution), nine 16-bit timers, four 32-bit timers, and advanced motor control peripherals such as Quadrature Encoder Interface (QEI) and High-Speed Analog Comparator. Communication interfaces include I2C, SPI, UART/USART, IrDA, LINbus, and USB OTG. The device supports 53 general-purpose I/O pins with 5V-tolerant inputs, and integrates a 10-bit ADC with up to 1.1 Msps conversion rate. The PIC24EP64MC206 uses a 3.3V supply (3.0V to 3.6V operating range), features an enhanced middle-stage pipeline for deterministic interrupt response, and supports multiple low-power modes including Idle, Sleep, and Deep Sleep for energy-efficient operation. Its deterministic instruction execution and rich peripheral set make it ideal for hard real-time control applications. Typical applications include three-phase BLDC and PMSM motor control, sensorless Field-Oriented Control (FOC) drives, industrial servo systems, and automotive body electronics. The high-resolution PWM and QEI make it equally suited for closed-loop stepper and DC motor drives. When designing with this MCU, pay attention to decoupling: place 100 nF ceramic capacitors as close as possible to each VDD/VSS pair, add a bulk 10 uF capacitor near the analog supply pins (AVDD), and ensure the 32 kHz low-power crystal layout (if used) follows Microchip AN1799 to minimize current consumption drift. This page synthesizes distributor pricing, drop-in pin-compatible alternatives, and practical design notes not found in the manufacturer datasheet, helping procurement and engineering teams accelerate their motor control design.

询价 联系我们
PIC24EP64MC206T-I/PT - 16-Bit 70MIPS 64KB Flash MCU | Microchip
PIC24EP64MC206T-I/PT

PIC24EP64MC206T-I/PT - 16-Bit 70MIPS 64KB Flash MCU | Microchip

The Microchip Technology PIC24EP64MC206T-I/PT is a high-performance 16-bit PIC microcontroller from the PIC24EP "Motor Control" family, delivering 70 MIPS (60 MHz) CPU performance with 64 KB (22K x 24) of Flash program memory in a 64-pin TQFP (10x10 mm) package. The "T" suffix denotes Tape & Reel packaging and the "I" indicates the industrial -40C to +85C temperature range, while the "/PT" package code identifies the 10x10 mm TQFP land pattern. It operates from a single 3.0 V to 3.6 V supply and provides 53 general-purpose I/O pins for digital and analog signal routing. A digital signal controller (DSC) is a specialized microcontroller that combines a microcontroller's interrupt-driven control architecture with a digital signal processor's arithmetic throughput, enabling real-time signal conditioning and high-speed closed-loop control. The PIC24EP64MC206 extends the baseline PIC24 architecture with single-cycle MAC, hardware fractional/integer divide, and tightly-coupled peripherals such as a 10/12-bit ADC, multiple PWM generators, op amps and comparators intended for current sensing. The result is a single-chip platform for sensorless and sensored motor control, power conversion and digital power stages. Key differentiating features of the PIC24EP64MC206T-I/PT include up to seven 16-bit timers (nine 16-bit timers per Microchip datasheet summary, application-dependent), dedicated PWM channels suitable for three-phase motor commutation, an integrated USB 2.0 full-speed peripheral (per the PIC24EP family datasheet), and an on-chip temperature sensor. It also supports multiple serial interfaces including UART, SPI and I2C, plus Parallel Master Port (PMP) for external memory or graphics, and up to 8 KB of RAM for data and stack operations. The industrial-grade -40C to +85C operating range suits harsh factory and automotive environments. Typical applications include three-phase brushless DC (BLDC) motor drives, permanent-magnet synchronous motor (PMSM) field-oriented control (FOC), switched-mode power supplies with digital PFC, solar inverters, industrial automation (robotics, CNC), home appliances (washing machines, refrigerators), and automotive subsystems such as electric pumps and fans. The integrated op amps, comparators and high-resolution PWM significantly reduce external component count for closed-loop current and voltage control. According to the Microchip product page, the 70 MIPS PIC24E motor control MCUs are designed to deliver high-performance, precision motor control that is more energy efficient, quieter, and offers extended range and life compared to legacy MCUs. When designing with this part, allocate the 64 KB of Flash carefully: the high-performance PWM libraries and FOC algorithms from Microchip (application notes AN1078, AN1292) typically consume 30-50 KB, leaving 14-34 KB for application code. The 3.0-3.6 V supply range demands an LDO or DC-DC converter upstream of 5 V systems, and decoupling must follow the datasheet guidance with 100 nF ceramic capacitors placed adjacent to every VDD/VSS pair. JTAG or ICSP programming requires the dedicated PGECx/PGEDx pins to be reserved and not loaded with heavy capacitance. This page synthesizes distributor pricing, drop-in same-package alternatives drawn from the same PIC24EP family, and practical design notes not found on a single manufacturer page.

询价 联系我们
PIC24F04KA200-I/P - 16-Bit 32MHz XLP MCU | Microchip
PIC24F04KA200-I/P

PIC24F04KA200-I/P - 16-Bit 32MHz XLP MCU | Microchip

The Microchip Technology PIC24F04KA200-I/P is a 16-bit RISC microcontroller with 4 KB of Flash program memory, 512 bytes of RAM, a 32 MHz maximum clock, and a 14-pin PDIP package. Designed for power-constrained and battery-powered equipment, it belongs to the PIC24F family and provides XLP eXtreme Low Power features for low-duty-cycle embedded control. A microcontroller is a programmable system-on-chip that combines a CPU core, memory, digital I/O, timers, and peripherals in one integrated circuit. The PIC24F04KA200 device is positioned as a low-power embedded controller within the broader hierarchy of microcontroller, embedded processor, and semiconductor. Its 10-bit ADC supports analog measurement, while the listed CTMU and UART peripherals support touch-capacitive measurement and serial communication. Key verified specifications include 16-bit instruction architecture, 32 MHz maximum frequency, 4 KB Flash organized as 1.375K × 24 words, 512 bytes of RAM, 12 I/O pins, and operation from a 3 V supply as identified in the distributor listings. The ADC is listed at 10 bits and 500 ksps conversion performance. XLP power-management features include DSBOR deep-sleep operation, DSWDT, and the RTCC peripheral. The -I/P ordering identifies Microchip's industrial-temperature 14-pin PDIP configuration. The /P package is a through-hole 14-DIP format measuring 0.300 inch wide and 7.62 mm across the pin row. It is appropriate for prototypes, instruments, controllers, and educational platforms where through-hole assembly and easy inspection are preferred. Exact pin functions, voltage limits, and full timing boundaries must be confirmed in the manufacturer documentation. Typical uses include battery-powered sensing, compact industrial controls, digital thermometers, capacitive-touch interfaces, low-power data loggers, and embedded instruments. The 500 ksps ADC can sample changing analog inputs quickly, while the UART supports a straightforward serial link to another controller or host. Designers should use the XLP modes aggressively rather than leaving the MCU active continuously when the application spends most of its time waiting. For low-power design, activate a suitable sleep mode between measurements, disable unused peripherals, and choose wake sources that match the required response time. The PCB should provide clean decoupling near the supply pins and adequate signal-routing margins for analog measurements. Firmware and peripheral configuration must follow Microchip's PIC24F device documentation. This page consolidates verified distributor specifications, manufacturer-series features, sourcing links, and design guidance. Pricing, lifecycle-sensitive fields, complete pin assignments, and absolute electrical limits are explicitly separated where the supplied search evidence does not establish them, preventing unsupported substitution during component selection.

询价 联系我们