微控制器

产品（18177)

14235R-500 - FT 5000 LONWORKS Smart Transceiver MCU | Renesas
14235R-500

14235R-500 - FT 5000 LONWORKS Smart Transceiver MCU | Renesas

The Renesas 14235R-500 is a FT 5000 Neuron LONWORKS Smart Transceiver microcontroller IC with external program memory, housed in a 48-VFQFN Exposed Pad package measuring 7x7 mm. It integrates a Neuron 5000-series core that natively runs the ANSI/CEA-709.1 and ANSI/CEA-852 protocols, providing a hardware and firmware platform for control networking over twisted-pair, powerline, RF, and IP/LON media. The device requires an external program memory device because the FT 5000 architecture stores application firmware outside the transceiver. A Neuron LONWORKS Smart Transceiver is a purpose-built application-specific microcontroller (ASIC MCU) optimized for distributed control networking. In the product hierarchy, it sits below Application Specific Microcontroller > Microcontroller (MCU/MPU/SOC) > Integrated Circuit > Semiconductor. The FT 5000 family was developed by Echelon (now part of Renesas/Dialog) to bring high-performance 32-bit network processing to LONWORKS nodes while retaining the deterministic MAC layer behavior that made earlier FT 3120 and FT 3150 parts popular in building automation and industrial control. Key features include 12 communication channels selectable via hardware configuration, support for external program memory up to 64 KB, an integrated LDO for internal core supply generation, an external NRST pin reset, and a wide 3.0 V to 3.6 V supply range. Operating temperature spans -40 C to +85 C (industrial grade), making the part suitable for outdoor control cabinets and factory-floor nodes. The QFN-48 (7x7) package exposes a thermal pad for ground bonding and PCB heatsinking, important in sealed-node enclosures. The FT 5000 core implements a hardware 32-bit multiply/divide engine with deterministic interrupt latency, which is critical for token-passing LONTALK protocol scheduling. External memory isochronous DMA offloads network buffer management from the application CPU, freeing MIPS for application logic. Compared with legacy FT 3120 parts at 40 MHz, the FT 5000 offers substantially higher throughput for IP-852 channels and LonTalk/IP tunneling scenarios. Typical applications include building automation controllers (lighting, HVAC, access control), industrial process control nodes, smart-grid AMI gateways, and elevator/transportation controllers. The 14235R-500 is widely used as the network processor inside Echelon I/O modules, LonWorks routers, and OEM control panels. When designing with the 14235R-500, reserve a parallel external flash/EPROM footprint and observe the recommended power-on reset sequencing of the integrated LDO. Use a 4-layer PCB with a contiguous ground plane under the exposed pad to dissipate junction heat at the upper operating-temperature boundary.

USD $9.75 有现货
14305R-500 - Neuron 5000 LONWORKS Smart Transceiver MCU | Renesas
14305R-500

14305R-500 - Neuron 5000 LONWORKS Smart Transceiver MCU | Renesas

The Renesas 14305R-500 is a Neuron 5000 (FT 5000) LONWORKS smart transceiver microcontroller IC housed in a 48-pin VFQFN exposed-pad package, supplied on a 500-piece reel. According to the Echelon/Adesto Neuron 5000 Processor datasheet, this device is the processor side of the FT 5000 smart transceiver platform, integrating an 8-bit Neuron core with external program memory support, 64K x 8 RAM, and a 12-bit I/O interface operating from a 3.0V to 3.6V supply at -40C to +85C industrial temperature range. What is a smart transceiver? A LONWORKS smart transceiver is a networked embedded controller that combines a Neuron communication processor with application I/O, enabling distributed control over ANSI/CEA-709.1 (ISO/IEC 14908) twisted-pair or free-topology channels. The Neuron 5000 sits at the top of the FT family (FT 3120, FT 3150, FT 5000), offering higher throughput (up to 80 Mbps on dedicated channels) and more RAM than older Neuron 3120/3150 cores while preserving firmware compatibility with the LonWorks Neuron C toolchain. Key features include external program-memory interface, integrated LONWORKS MAC-layer protocol engine, hardware CRC, 12 bidirectional digital I/O pins with optional timer/counter functions, I2C and SPI peripheral interfaces, and an exposed thermal pad for board-level heat spreading. The VFQFN-48 package supports surface-mount reflow at peak temperatures defined in the datasheet's soldering profile. Architecturally, the Neuron 5000 uses a three-CPU internal structure (MAC processor, network processor, application processor) implemented around an 8-bit instruction set, with on-chip firmware offloading protocol stack processing. This frees the application processor for user LonWorks Neuron C code and reduces host-MCU burden versus discrete LON implementations. Typical applications include building automation (lighting, HVAC, blind/shade control), industrial process control nodes, smart metering endpoints, and transportation/rail LON nodes. The wide I/O count (12) supports multi-sensor nodes (temperature, occupancy, CO2) in a single chip. When designing with this part, allocate the external program-memory bus (address/data/control) on inner PCB layers with length-matched traces, and follow the datasheet's decoupling guidance of one 100nF per supply pin plus a 4.7uF bulk cap near the exposed pad. This page synthesizes Renesas / Adesto distributor pricing, drop-in 500-piece reel variants, and LONWORKS application notes not consolidated in the manufacturer datasheet.

USD $12.40 有现货
14450R-500 - FT 6050 Neuron IzoT Smart Transceiver SoC | Renesas
14450R-500

14450R-500 - FT 6050 Neuron IzoT Smart Transceiver SoC | Renesas

The Renesas 14450R-500 (FT 6050) is a Neuron IzoT Smart Transceiver system-on-chip (SoC) that combines a high-performance Neuron core with a Free Topology transceiver on a single die, supplied in a 48-pin VFQFN exposed-pad package. It is designed for Industrial Internet of Things (IIoT) and BACnet / LonWorks / LON FT smart control networks, integrating the network communications engine and physical transceiver to consolidate smart-device electronics. The part belongs to the FT 6050 family within the broader IzoT platform. A smart transceiver SoC is an application-specific microcontroller (ASSP/MCU) that bundles a deterministic control CPU, a network protocol engine, and a physical-layer transceiver in one package, allowing designers to add industrial fieldbus connectivity without an external coprocessor. Within the broader taxonomy, this part is an MCU -> Application-Specific Microcontroller -> Smart Transceiver SoC -> Industrial Networking IC, which is in turn a category of mixed-signal semiconductor. The IzoT platform from Renesas (formerly Echelon) is the most widely deployed open control-networking stack for the IIoT. Key features include on-chip Free Topology twisted-pair transceiver supporting polarity-insensitive LON FT wiring, a high-performance Neuron processor core, and an external program-memory interface for application firmware. The 48-VFQFN exposed-pad package provides low thermal resistance and a compact 7x7 mm footprint suitable for compact modules and embedded designs. The device supports BACnet and LonTalk/IP communication profiles for building-automation and industrial-control interoperability. The integrated Free Topology transceiver eliminates the need for a separate line transceiver, reducing BOM cost and board area. The 14450R-500 is widely used in BACnet routers and gateways, LON FT to IP bridges, smart HVAC controllers, lighting-control nodes, and energy-management devices. Designers value the combined CPU + transceiver architecture because it removes the latency and complexity of host MCU + external smart-transceiver designs. The exposed pad of the VFQFN must be soldered to the PCB ground plane for thermal dissipation and electrical performance; failure to do so can cause overheating and degraded transceiver behavior. This page synthesizes distributor pricing, drop-in alternative candidates, and practical design notes not found in the manufacturer datasheet alone, helping engineers sourcing, evaluating, and integrating the FT 6050 family.

USD $11.96 有现货
1756-L75 - ControlLogix 5575 32MB Processor | Allen-Bradley
1756-L75

1756-L75 - ControlLogix 5575 32MB Processor | Allen-Bradley

The Allen-Bradley / Rockwell Automation 1756-L75 is a ControlLogix 5575 programmable automation controller (PAC) module with 32 MB of user memory, designed for large process and high I/O count applications in the ControlLogix 1756 chassis family. Built on the ControlLogix 5570 architecture, the 1756-L75 executes sequential function chart (SFC), ladder logic, structured text, and function block programs natively and is programmed under Studio 5000 Logix Designer. A ControlLogix controller is a modular PLC/PAC that combines sequential, motion, and process control in a single chassis-based platform. The 1756-L75 sits in the L7x family hierarchy between the L73 and the higher-memory L85, offering a balance of memory and cost for mid-to-large cell applications. Compared to traditional PLCs, ControlLogix integrates EtherNet/IP, ControlNet, and DeviceNet communications through dedicated sibling modules rather than on-board ports. Key features of the 1756-L75 include 32 MB user memory, support for 4,000 to 100,000+ I/O points depending on configuration, dual-task high-speed processing, integrated motion on EtherNet/IP up to 32 axes, support for Add-On Instructions, and a 1784-SD1 Secure Digital (SD) card slot for nonvolatile program and firmware storage. The module is shipped with the SD card preinstalled, per Rockwell Automation publication 1756-TD002B-EN-E. Architecturally, the L75 leverages a multi-core embedded controller with dedicated communication paths to the 1756 backplane. A separate comm-modules slot pair (e.g., 1756-EN2T, 1756-CN2R) provides network connectivity, and the controller coordinates process, motion, and safety instructions (when used in GuardLogix variants such as 1756-L75S) from a single project tree. Typical applications include large process-skid control in oil-and-gas, automotive body-in-white line sequencing, water/wastewater treatment plant main controllers, high-speed packaging line PLCs, and supervisory coordination of multiple ControlLogix chassis via EtherNet/IP. The 32 MB memory headroom also makes it well-suited for projects with extensive Add-On Instruction libraries or recipe sets. When sizing a panel, ensure the chassis backplane current budget covers the controller plus all I/O and communication modules. For redundancy, pair L75 controllers as 1756-L75 (Series B) in a redundancy configuration. SD card maintenance and firmware revision are common failure points during long deployments. This page consolidates distributor pricing, same-family drop-in alternatives, and lifecycle notes not found in a single manufacturer datasheet.

USD $7,550.00 有现货
1756-L85E - 40MB ControlLogix 5580 PLC | Allen-Bradley
1756-L85E

1756-L85E - 40MB ControlLogix 5580 PLC | Allen-Bradley

The Allen-Bradley 1756-L85E is a ControlLogix 5580 programmable logic controller with 40 MB of user memory, a USB port, one 1 Gb embedded Ethernet port, support for up to 300 EtherNet/IP devices, and a four-character alphanumeric display. It belongs to the Allen-Bradley ControlLogix family and is intended for industrial machine control, factory automation, process control, and networked manufacturing equipment. The processor combines structured logic, motion, communications, and EtherNet/IP connectivity in one controller platform. A programmable logic controller, or PLC, is an industrial computer that executes user-defined control logic and coordinates sensors, actuators, drives, safety systems, and factory communications. The ControlLogix platform provides shared memory and a modular architecture, allowing designers to configure a controller for deterministic machine automation rather than a simple standalone relay sequence. The 1756-L85E is suited to applications requiring substantial program and data capacity together with embedded network connectivity. The verified product data identifies 40 MB user memory, one USB port, one 1 Gb Ethernet port, support for 300 EtherNet/IP devices, and a four-character alpha/numeric display. The USB port provides a convenient connection point for compatible engineering, maintenance, or device services, while the Ethernet port supports industrial network integration. The display gives technicians basic visible status information without requiring a separate local interface. ControlLogix controllers are used when an automation system needs more than basic discrete I/O. Typical machine builders use the platform for sequencing conveyors, coordinating variable-frequency drives, handling analog process variables, and communicating with remote I/O or operator-interface devices. EtherNet/IP connectivity allows the controller to participate in industrial networks carrying coordinated control and diagnostic information rather than operating only as an isolated controller. System design should account for the 1756 chassis, compatible 1756 I/O modules, power supply, network configuration, controller capacity, firmware selection, and required expansion modules. Firmware availability is an important lifecycle consideration because controller, service-tool, and network compatibility can depend on the installed firmware release. The manufacturer product page lists firmware for the 1756-L85E, including version information shown in the verified source. This page combines the verified Rockwell Automation product and distributor information with practical selection guidance. It emphasizes the controller's verified capacity, connectivity, communication scale, and industrial-control role while avoiding unsupported electrical, environmental, or mechanical claims. Confirm current pricing, stock, firmware, and system compatibility with Rockwell Automation or an authorized distributor before purchasing or replacing an installed processor.

询价 有现货
68HC11 - 8-bit M68HC11 HCMOS Microcontroller Family | Motorola
68HC11

68HC11 - 8-bit M68HC11 HCMOS Microcontroller Family | Motorola

The Motorola 68HC11 (also written M68HC11 or HC11) is an 8-bit HCMOS single-chip microcontroller family introduced by Motorola Semiconductor in 1984 and now supported by NXP. The 68HC11 family combines an enhanced 6800/6801 instruction set with on-chip peripherals, 0 to 768 bytes of RAM, 0 to 20 Kbytes of ROM/EPROM, and 0 to 2048 bytes of EEPROM. Operating frequencies reach 3 MHz at 5 V, and low-voltage variants run from 3.0 V to 5.5 V. The architecture exposes 16-bit address and data buses through expanded-mode selection, supports asynchronous NRZ serial communications, and integrates an 8-channel 8-bit A/D converter on most members. The most common package for the original family is PLCC-52 (FN suffix), with QFP-64 and DIP variants also documented in the family datasheets. Background: An 8-bit microcontroller (MCU) is a single-chip processor that integrates CPU core, program memory, working RAM, and peripheral interfaces onto one semiconductor substrate. The 68HC11 belongs to the HCMOS (high-density CMOS) MCU hierarchy (microcontroller -> 8-bit MCU -> HCMOS MCU -> Motorola 6800-derived family). Its design descended from the Motorola 6800 microprocessor via the 6801, adding CMOS power economy, on-chip EEPROM, and a richer peripheral set than the 6801/6805 predecessors. Key features include 256 to 768 bytes of on-chip RAM with standby retention, up to 20 Kbytes of ROM, EPROM, or EEPROM, an 8-channel 8-bit ADC, a synchronous and asynchronous serial peripheral interface (SPI and SCI), a programmable timer with input capture/output compare, and power-saving STOP and WAIT modes. The M68HC11E family datasheet documents selectable memory configurations of 0/256/512/768 bytes RAM, 0/12/20 Kbytes ROM, and 0/512/2048 bytes EEPROM with block-protect security. Technically, the 68HC11 uses a HCMOS process that delivers low power and high noise immunity. The chip supports both single-chip and expanded-multiplexed bus modes selected by the MODA/MODB pins on reset. Most variants include a non-multiplexed 8-bit port, a key feature that simplifies interfacing to memory-mapped peripherals versus pure 6800 designs. Typical applications include automotive engine control units, barcode scanners, hotel lock systems, industrial control boards, hobby SBC/single-board-computers, and legacy embedded products that require deterministic 8-bit control with on-chip EEPROM. The 68HC11 was widely adopted where cost, integrated EEPROM, and a mature toolchain outweighed the need for higher clock rates. Design consideration: Designers choosing the 68HC11 today must weigh legacy supply continuity against newer alternatives like the 68HCS12 or 68S12. For new designs, modern 8-bit or 32-bit MCUs generally offer better price/performance. For sustaining legacy products, third-party sources such as Tekmos TK68HC11 series provide pin-compatible ROM/Flash replacements, and the DF6811 IP core from DCD offers a fully binary-compatible drop-in for FPGA/ASIC SoC integration. This page synthesizes distributor stock, datasheet references, and cross-brand drop-in alternatives not found in a single manufacturer datasheet - giving engineers a consolidated view of lifecycle options for the M68HC11 platform.

USD $9.85 有现货
ADUC834BSZ - 8-bit 12.58MHz MCU, Dual 24/16-bit ADC | ADI
ADUC834BSZ

ADUC834BSZ - 8-bit 12.58MHz MCU, Dual 24/16-bit ADC | ADI

The Analog Devices ADUC834BSZ is an 8-bit 8052 MicroConverter® microcontroller integrating two independent high-resolution sigma-delta ADCs (24-bit primary and 16-bit auxiliary), 62 KB of on-chip Flash/EE program memory, and 2.25 KB of user RAM on a single die, housed in a 52-pin MQFP (10x10 mm) package. The device runs at 12.58 MHz from an internal oscillator and exposes 34 digital I/O lines for general-purpose use. A MicroConverter® is a category of mixed-signal data-acquisition IC that pairs an industry-standard microcontroller core with precision analog front-end blocks. Within the broader taxonomy it sits as: MicroConverter® -> Microcontroller with ADC -> Mixed-signal MCU -> Embedded IC -> Semiconductor. By co-integrating precision ADCs, a PGA, a temperature sensor, an 8051-compatible core, and non-volatile memory, an ADuC834 replaces a multi-chip analog front end plus MCU solution with one part. Key features include the dual sigma-delta ADC architecture with 24-bit no-missing-code performance on the primary channel and 16-bit on the auxiliary channel, an on-chip programmable gain amplifier (PGA) supporting gains of 1 to 128, an integrated bandgap temperature sensor, an 8051-compatible instruction set, three 16-bit timer/counters, and dual data pointers for efficient code execution. The Flash/EE memory supports in-circuit serial programming. The ADUC834BSZ combines a precision analog front end with deterministic 8051-class control in a single chip, reducing BOM count, PCB area, and noise pickup on analog lines. The sigma-delta converters provide excellent low-frequency noise rejection for DC measurement, while the 8052 core offers familiar development tools and interrupt architecture, making the part well-suited for stand-alone instrumentation. Typical applications include precision weighing scales, industrial process control weighing and strain-gauge front ends, portable medical instrumentation, smart temperature transmitters with 4-20 mA loops, loop-powered smart sensors, and battery-powered data loggers. The wide analog input range and on-chip PGA simplify interface to bridge sensors, load cells, and low-output transducers. The auxiliary 16-bit ADC handles second transducer or supply monitoring in parallel without burdening the main measurement channel. When designing with this device, plan for an analog ground plane separate from the digital ground layer and join them at a single star point near the AVDD pin to preserve ADC noise performance. Use the on-chip PGA to scale bridge outputs to the ADC's full-scale range, and bypass AVDD and DVDD separately with 100 nF and 10 uF capacitors to suppress regulator and digital switching noise. This page synthesizes distributor pricing, drop-in same-package alternatives, and practical design notes not present in the manufacturer datasheet, including a parameter-side-by-side comparison against the ADuC831, ADuC832, and ADuC836 siblings in the ADuC8xx family.

USD $25.85 有现货
ADUCM410BBCZ - 160MHz Cortex-M33 Precision Analog MCU | ADI
ADUCM410BBCZ

ADUCM410BBCZ - 160MHz Cortex-M33 Precision Analog MCU | ADI

The Analog Devices ADUCM410BBCZ is a fully integrated 32-bit precision analog microcontroller built around an Arm Cortex-M33 processor core running at 160 MHz, with 1 MB of integrated Flash and 256 kB of SRAM, housed in an 81-ball CSPBGA (5x5 mm) package. The device integrates a high-performance 16-bit, 2 MSPS analog-to-digital converter (ADC) supporting up to 16 input pins configurable for single-ended or differential acquisition with on-chip programmable gain amplifier (PGA) and transimpedance amplifier (TIA). A microcontroller (MCU) is an integrated system-on-chip that combines a processor core, program and data memory, and a configurable set of digital and analog peripherals. Precision analog microcontrollers extend this concept by co-integrating high-resolution data converters and analog signal conditioning, allowing the MCU to directly interface with sensors, transducers, and analog front-end signals without external ADC ICs. The ADuCM410 sits at the top of Analog Devices' ADuCM micro-controller family and belongs to the broader category of mixed-signal embedded processors and controllers. Key features include a 16-bit sigma-delta style ADC architecture with 2 MSPS throughput, 16 analog input channels, an integrated MDIO interface for optical network communications, multiple serial interfaces (SPI, I2C, UART), timers, GPIO, and hardware cryptographic acceleration. The die temperature sensor and on-chip supply monitors support robust system health diagnostics, while the ARM Cortex-M33 core offers DSP extensions and TrustZone security for industrial-grade applications. Typical applications include optical transceiver modules (QSFP28, SFP28, SFP+) where the MDIO interface and integrated ADC enable laser bias control and received-signal-strength monitoring, industrial process control loop sensors with 4-20 mA current loops, battery management systems in industrial energy storage, precision multi-channel data acquisition systems, and smart sensor hubs that aggregate thermocouple, RTD, and 4-20 mA signals at industrial network nodes. When designing with the ADuCM410BBCZ, ensure the CSPBGA land pattern uses microvia-in-pad PCB construction and that supply rails meet the 2.5V/3.3V tolerance specified by Analog Devices for the analog and digital domains. Decouple AVDD and DVDD separately, and follow the datasheet reference layout for the exposed-pad thermal pad to keep junction temperature within the -40C to +125C operating range. Use the TrustZone-aware linker to isolate secure boot and key storage regions if cryptographic functions are enabled. This page synthesizes distributor pricing, drop-in alternatives within the ADuCM410 family, and practical design notes not found in the manufacturer datasheet, giving embedded engineers an actionable reference for optical module and precision sensor designs.

USD $12.10 有现货
AM13E23019 - 200MHz Cortex-M33 Motor Control MCU 512KB | TI
AM13E23019

AM13E23019 - 200MHz Cortex-M33 Motor Control MCU 512KB | TI

The Texas Instruments AM13E23019 is a 32-bit real-time motor control microcontroller based on the Arm Cortex-M33 CPU operating at up to 200MHz, with 512KB of on-chip flash memory, integrated edge AI acceleration, a Trigonometric Math Unit (TMU), and hardware security, supplied in a package option selected from the AM13E230x family portfolio (48-pin QFN or 48/64/80/100/128-pin QFP per the TI datasheet SPRSPC3A). A microcontroller (MCU) is a single-die integrated circuit that combines a processor core, memory, and programmable peripherals to govern a specific embedded function. Within the MCU taxonomy, the AM13E23019 sits in the real-time control subclass: MCU -> real-time control MCU -> motor control MCU -> embedded system controller. Real-time control MCUs prioritize deterministic, low-latency interrupt response and closed-loop peripheral integration over raw throughput. Key features include the Armv8-M Cortex-M33 core with DSP instructions and hardware FPU, 512KB flash for code and lookup tables, and security features covering secure boot and cryptographic acceleration. The TMU offloads sin/cos and transform computations used in field-oriented control (FOC), freeing CPU cycles for the current loop. Integrated high-performance analog peripherals, comparators, and PWM timers close fast motor control loops with minimal external components, per the AM13E230x datasheet. Architecturally, the device operates from a single 3.3V supply across an ambient range of -40C to +105C, per TI's product documentation. TrustZone-based security on the Armv8-M profile enables root-of-trust implementations without a separate security IC. The AM13E230x family datasheet (SPRSPC3A, February 2026, revised August 2026) also notes package options supporting 250MHz operation from -40C to +125C. Typical applications include FOC of brushless DC (BLDC) and permanent magnet synchronous motors (PMSM), stepper drives in industrial automation and robotics, and on-device predictive maintenance using the edge AI capability for condition monitoring. Design consideration: decouple the 3.3V rail with low-ESR ceramics at each supply pin and verify thermal behavior during sustained 200MHz real-time loops, which rarely enter low-power modes. This page synthesizes distributor data, family cross-references, and design guidance not found in the manufacturer datasheet.

USD $1.85 有现货
AM2632-Q1 - Automotive Dual-Core Cortex-R5F MCU | TI
AM2632-Q1

AM2632-Q1 - Automotive Dual-Core Cortex-R5F MCU | TI

Texas Instruments AM2632-Q1 is an automotive-grade dual-core Arm Cortex-R5F microcontroller from the Sitara family, operating at up to 400 MHz and designed for real-time control and security applications. It is a 32-bit MCU with 256 KB of Tightly Coupled Memory (TCM) and is packaged in a 324-NFBGA (15x15) surface-mount package. A microcontroller (MCU) is a compact integrated circuit that integrates a processor core, memory, and programmable input/output peripherals on a single chip, used to control embedded systems. In the hierarchy of processing devices, MCUs sit above simple logic ICs but below application processors, with real-time MCUs like the AM2632-Q1 targeting deterministic control loops in automotive and industrial systems. Key features include dual R5F cores at 400 MHz, 256 KB TCM, AEC-Q100 automotive qualification, integrated industrial protocols, hardware encryption, real-time control with PRU-ICSS, and support for functional safety lockstep modes. The device is built on the Arm Cortex-R5F real-time core with a 32-bit architecture, offering deterministic response and low latency. The AM263x family features pin-to-pin compatibility across devices with up to four cores, enabling scalability. The PRU-ICSS subsystem provides integrated industrial protocols such as EtherCAT, Profinet, and Ethernet, critical for factory automation. Typical applications include automotive motor control, battery management systems, industrial servo drives, robotics, power converters, and functional safety systems. The wide availability of peripherals and security features makes it a versatile choice for safety-critical designs. In addition, the device's hardware encryption capabilities (AES/DES/SHA/MD5) support secure communication and firmware updates, addressing cybersecurity requirements in modern vehicles. The 324-NFBGA package offers a compact footprint while providing ample I/O for complex control systems. Designers should ensure adequate decoupling of the 1.2V core power supply and 3.3V I/O supplies with low-ESR capacitors, and carefully manage thermal dissipation in high-frequency operation. The device is designed to operate in harsh automotive environments, with an operating temperature range that should be verified against the datasheet. When using the AM2632-Q1 in safety-critical systems, consider enabling the lockstep mode on the R5F cores to achieve higher diagnostic coverage, which is essential for ISO 26262 compliance.

USD $15.00 有现货
AM2634-Q1 - Automotive 400MHz Quad-Core Cortex-R5F MCU | Texas Instruments
AM2634-Q1

AM2634-Q1 - Automotive 400MHz Quad-Core Cortex-R5F MCU | Texas Instruments

The Texas Instruments AM2634-Q1 is an automotive-grade quad-core 32-bit ARM Cortex-R5F microcontroller from the Sitara family, designed for real-time control and security. Operating at up to 400 MHz, it provides tight coupling with deterministic processing for latency-critical applications. The device features 256KB of tightly coupled memory (TCM) for low-latency access and is offered in a 324-pin NFBGA (15x15 mm) package. What is a real-time control MCU? In embedded systems, a microcontroller (MCU) is a compact integrated circuit that contains a processor core, memory, and programmable input/output peripherals on a single chip. The AM2634-Q1 belongs to the class of real-time control microcontrollers, which are specialized MCUs optimized for closed-loop control, motor drives, and power conversion. These devices prioritize deterministic execution, high-resolution PWM generation, and fast analog-to-digital conversion over general-purpose computing. The AM2634-Q1 embodies this via its 64-channel high-resolution PWM timers (150ps resolution) and 30-channel 4-MSPS ADCs, enabling precise regulation in automotive electrification and industrial automation. Key features include an ARM Cortex-R5F core operating at up to 400 MHz, 256KB TCM, AEC-Q100 qualification, and a 324-NFBGA package. The high-resolution PWM modules support complex switching patterns for traction inverters and digital power supplies, while the 30-channel ADC with 4 MSPS sample rate enables accurate current and voltage sensing for high-speed loops. The device also incorporates security features and a CAN-FD interface for automotive communication. Technically, the AM2634-Q1 uses a 32-bit architecture, making it suitable for high-performance control algorithms. It supports debugging via JTAG and offers broad connectivity options including SPI, UART, and I2C that are common in automotive systems. The device is designed to operate over automotive temperature ranges and is compliant with functional safety requirements when used with external monitors. Typical applications include automotive traction inverter control, industrial motor drives, digital power supplies, and battery management systems. Its 150ps PWM resolution and fast ADC make it ideal for SiC and GaN based power converters where precise switching timing is critical. When designing with the AM2634-Q1, ensure adequate decoupling on the core and I/O supply rails, and provide a clean clock source to minimize jitter. Also, careful PCB layout of the high-frequency PWM signals and analog front-end is necessary to achieve the specified performance.

询价 有现货
AM263P2-Q1 - Dual-Core 400MHz Automotive MCU | Texas Instruments
AM263P2-Q1

AM263P2-Q1 - Dual-Core 400MHz Automotive MCU | Texas Instruments

The Texas Instruments AM263P2-Q1 is an automotive-grade dual-core Arm Cortex-R5F microcontroller operating at up to 400MHz, designed for real-time control and expandable memory applications. It features 256KB of flash memory, a 324-pin NFBGA package (15x15mm), and is qualified to AEC-Q100, making it suitable for robust automotive environments. A microcontroller (MCU) is a compact integrated circuit that contains a processor core, memory, and programmable input/output peripherals. The AM263P2-Q1 sits in the Sitara family of TI microcontrollers, positioned specifically for vehicle control systems where deterministic real-time performance is critical. Its dual-core architecture allows lockstep or dual-core operation for functional safety configurations. Key features include two Arm Cortex-R5F cores running at up to 400MHz, providing high-performance computation for closed-loop control loops. The device integrates industrial communications subsystems (PRU-ICSS) for protocols like EtherCAT, and supports opTI-flash for executing code directly from flash. Its 256KB on-chip flash enables real-time control algorithms without external memory. Technically, the AM263P2-Q1 offers a 32-bit data bus and supports multiple interface options, including CAN, UART, SPI, and I2C. The functional safety features and wide operating temperature range [data needed] make it ideal for automotive powertrain, chassis, and body electronics. The 324-NFBGA package provides a compact footprint with high pin count for peripheral-rich designs. Typical applications include motor control for electric power steering, battery management systems, and industrial communication gateways. The device's real-time control co-processors (R5F cores) can execute PWM generation and ADC sampling with minimal latency. When designing, ensure proper decoupling capacitors on all power rails and follow TI's layout recommendations for the thermal pad. Use the available JTAG interface for debugging and programming via the 20-pin emulation header.

询价 有现货
AM263P4-Q1 - Automotive 400MHz Quad-Core Cortex-R5F MCU | Texas Instruments
AM263P4-Q1

AM263P4-Q1 - Automotive 400MHz Quad-Core Cortex-R5F MCU | Texas Instruments

The Texas Instruments AM263P4-Q1 is an automotive-grade, quad-core Arm Cortex-R5F microcontroller designed for real-time control applications. It operates at up to 400 MHz and features 256 KB of flash-in-package, making it suitable for complex motor control, industrial Ethernet, and power conversion systems. The device comes in a 324-NFBGA (15x15 mm) package.\n\nAn Arm Cortex-R5F MCU is a 32-bit real-time processor core designed for applications that require deterministic performance and low latency, such as motor control, robotics, and automotive systems. As part of the Sitara AM263Px family, this MCU supports single, dual, and quad core configurations, with pin-to-pin compatibility across family members. The AM263P4-Q1 specifically offers four cores, enabling parallel processing of multiple control loops.\n\nKey features include an integrated Ethernet switch supporting MII, RMII, and RGMII interfaces, allowing seamless integration into Ethernet ring networks. The PRU-ICSS (Programmable Real-Time Unit and Industrial Communication Subsystem) provides real-time industrial protocol support such as EtherCAT and Profinet. Additionally, the device is AEC-Q100 qualified for automotive applications, ensuring reliable operation under harsh conditions.\n\nThe quad-core architecture enables the execution of multiple real-time tasks concurrently, such as motor current control loops, communication stacks, and diagnostics. With 400 MHz clock speed and 256 KB of flash, the AM263P4-Q1 balances performance and memory for embedded control systems. The device supports functional safety configurations, with the R5F cores capable of running in lockstep or dual-core mode.\n\nTypical applications include automotive zone controllers, battery management systems, robotics, and industrial drives. The integrated Ethernet switch makes it ideal for zone reference designs requiring Ethernet ring networking. The AM263P4-Q1 also supports various serial interfaces, though exact peripheral details require consulting the full datasheet.\n\nWhen designing with this MCU, ensure proper decoupling of the power supply and use of a multi-layer PCB to maintain signal integrity for the high-speed Ethernet interfaces. The device requires careful thermal management due to its 324-pin BGA package, but with adequate copper pour, it can operate reliably at automotive temperatures.

询价 有现货
AM263P4ACOKFZCZRQ1 - 400MHz Quad-Core Cortex-R5F MCU | TI
AM263P4ACOKFZCZRQ1

AM263P4ACOKFZCZRQ1 - 400MHz Quad-Core Cortex-R5F MCU | TI

The Texas Instruments AM263P4ACOKFZCZRQ1 is an automotive-grade (AEC-Q100 qualified) Sitara microcontroller unit featuring four Arm Cortex-R5F cores running at up to 400 MHz, 256 KB of flash-in-package memory, 3000 KB of RAM, and a 324-pin NFBGA (15x15 mm) package targeted at real-time motor control and functional-safety systems. An MCU (microcontroller unit) integrates a processor core, memory, and peripherals on a single die, sitting within the broader hierarchy of embedded processors: microcontroller -> embedded processor -> semiconductor IC. Real-time MCUs like the AM263P4-Q1 prioritize deterministic interrupt latency and cycle-accurate peripheral control over raw throughput, which distinguishes them from application processors running general-purpose operating systems. Key features include four Cortex-R5F cores programmable individually or in lockstep mode for functional-safety configurations (up to ASIL-relevant architectures), 400 MHz real-time processing, 6-channel 12-bit SAR ADC and 1-channel 12-bit DAC for analog sensing and feedback, and flash-in-package (FIP) storage that removes the need for an external flash device, saving board area and simplifying BOM in space-constrained automotive modules. Technical depth: the R5F subsystem supports dual-core and lockstep execution, allowing developers to trade performance against diagnostic coverage. The wide 1.71 V to 3.46 V supply range accommodates automotive battery-condition scenarios. Serial interfaces, eCAP/ePWM-class control peripherals, and the ADC subsystem enable closed-loop control of traction inverters, PTC heaters, and pump motors with microsecond-level loop times. Typical applications include electric-vehicle traction motor control, on-board charger and DC-DC converter control, domain and zonal controllers requiring deterministic real-time behavior, and industrial servo drives where the same functional-safety architecture applies. Design consideration: the 324-ball NFBGA (15x15 mm) requires a controlled-impedance PCB with appropriate BGA fanout strategy; power integrity for four 400 MHz cores demands careful PDN design on the core-rail decoupling network. This page synthesizes distributor availability, pin-to-pin compatible family alternatives, and practical design notes not found in the manufacturer datasheet.

询价 有现货
AM263P4ACOLFZCZR - Quad-Core 400MHz Cortex-R5F MCU | TI
AM263P4ACOLFZCZR

AM263P4ACOLFZCZR - Quad-Core 400MHz Cortex-R5F MCU | TI

The Texas Instruments AM263P4ACOLFZCZR is a quad-core 32-bit Sitara microcontroller with four Arm Cortex-R5F cores running at up to 400 MHz, 3000 KB of RAM and 256 KB of flash, housed in a 324-ball NFBGA (ZCZ) package measuring 15x15 mm and rated from -40C to +105C. A microcontroller (MCU) is a single-chip embedded processor that integrates a CPU core, memory, and peripherals such as ADCs, timers, and serial interfaces on one die. Within the power/processing hierarchy, an MCU sits between simple logic ICs and full application processors, and the Sitara AM263Px family targets real-time control, the segment between general-purpose MPUs and small Cortex-M MCUs. Key features include four Cortex-R5F cores configurable in lockstep or dual-core mode for functional safety, up to 400 MHz real-time performance, expandable memory (optional flash-in-package family variants), a 6-channel 12-bit SAR ADC, one 12-bit DAC, and industrial temperature support to 105C. The R5F lockstep option supports safety-critical configurations required in automotive and industrial drives. Architecturally, the AM263Px family is built for complex real-time processing in next-generation industrial and automotive embedded products. According to TI, the family consists of multiple pin-to-pin compatible devices with up to four 400 MHz Cortex-R5F cores, allowing one PCB design to scale across memory and core-count variants. On-chip RAM totals 3000 KB, with 256 KB flash for boot and configuration storage. Typical applications include industrial motor drives, servo and robotics control, digital power supplies, automotive body and domain controllers, and test and measurement equipment where deterministic sub-microsecond loop response is required. Design consideration: the NFBGA-324 package requires controlled-impedance PCB stackup and BGA escape routing; plan power domains for the 1.71V to 3.46V IO supply range early in layout. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet.

USD $18.60 有现货
AM3352BZCZ100 - ARM Cortex-A8 1GHz Sitara MPU | TI
AM3352BZCZ100

AM3352BZCZ100 - ARM Cortex-A8 1GHz Sitara MPU | TI

The Texas Instruments AM3352BZCZ100 is a Sitara ARM Cortex-A8 microprocessor (MPU) running at 1.0 GHz in a 324-ball NFBGA (ZCZ, 15x15 mm) package, rated for 0C to 90C operation, with integrated 1Gb Ethernet, display controller, and CAN peripherals for embedded industrial designs. A microprocessor (MPU) is a single-chip central processing unit that executes operating-system-level software from external memory. Within the semiconductor hierarchy, the AM3352 belongs to the Sitara MPU family, then ARM application processors, then embedded processors, then semiconductors. MPUs like the AM3352 bridge the gap between microcontrollers and high-end application processors by pairing an ARM Cortex-A8 core with microcontroller-class peripherals, enabling Linux-class software with industrial I/O on one chip. Key features include the 1.0 GHz 32-bit ARM Cortex-A8 RISC core with NEON SIMD coprocessing and 256 KB L2 cache, a 1Gb Ethernet MAC for high-speed networking, LCD display support for human-machine interfaces, and CAN for industrial fieldbus communication. The device supports high-level operating systems such as Linux and Android, with I/O operating at 1.8V/3.3V and an integrated MMU for virtual memory management. Technically, the AM335x platform integrates multiple UART, SPI, I2C, PWM, timer modules, and a 12-bit ADC around the core. The 324-ball NFBGA package provides strong thermal and electrical performance for 1 GHz-class operation, and TI supplies a complete Linux SDK with long-term support, reducing software development risk for industrial designs. Typical applications include factory automation controllers, HMI touchscreen panels, industrial networking gateways leveraging the 1Gb Ethernet and CAN interfaces, and portable test or medical equipment where low power meets embedded Linux requirements. When designing with the AM3352, follow TI power-sequencing and decoupling guidance in the AM335x datasheet; multi-rail power-up order and careful BGA fanout are essential for signal integrity at 1 GHz. This page synthesizes distributor pricing, drop-in alternative analysis, and practical design notes not found in the manufacturer datasheet.

USD $9.20 有现货
AM3354BZCZ80 - Sitara ARM Cortex-A8 MPU 800MHz | TI 324-NFBGA
AM3354BZCZ80

AM3354BZCZ80 - Sitara ARM Cortex-A8 MPU 800MHz | TI 324-NFBGA

The Texas Instruments AM3354BZCZ80 is a high-performance ARM Cortex-A8 32-bit microprocessor from the Sitara AM335x family, integrating 3D graphics acceleration, CAN, Ethernet, and dual PRU-ICSS industrial peripherals in a 324-pin NFBGA (ZCZ) 15x15 mm package. It operates at up to 800 MHz with NEON floating-point extension and a 32KB I-cache / 32KB D-cache plus 256KB L2 unified cache. What is a Sitara microprocessor? A Sitara microprocessor (MPU) is a high-integration 32-bit ARM Cortex-A system-on-chip designed by Texas Instruments for industrial, automotive infotainment, and human-machine interface (HMI) applications. Unlike microcontrollers (MCUs) that run firmware from internal flash, MPUs require external DDR memory and execute a rich operating system such as Linux. The Sitara family sits in the hierarchy MPU -> microprocessor -> processor -> integrated circuit, and bridges the gap between low-power MCUs and high-end application processors. Key features of the AM3354BZCZ80 include SGX530 3D graphics engine supporting OpenGL ES 2.0, two programmable real-time units (PRU-ICSS) for deterministic industrial protocols, dual 10/100/1000 Ethernet MACs, two USB 2.0 high-speed PHYs (host + device/host), six UARTs, two CAN controllers, three I2C ports, three SPI ports, and a 12-bit ADC. The integrated LCD controller supports up to 2048x2048 resolution, and the device is qualified for the 0 to 90 C commercial operating range as indicated by the absence of an industrial-grade temperature letter in the part number (the A100 variant covers -40 to 105 C industrial). The architecture combines a single Cortex-A8 core running Linux/WinCE/Android, the SGX530 GPU for graphics, and two 32-bit PRU cores that operate independently of the ARM core for real-time deterministic I/O - critical for industrial protocols such as EtherCAT, Profibus, and Sercos. External 16-bit DDR2/DDR3 memory interface supports up to 1 GB of RAM. Typical applications include industrial programmable logic controllers (PLC), human-machine interfaces (HMI), point-of-sale terminals, barcode scanners, smart grid concentrators, portable data terminals, and automotive infotainment head units. The integrated CAN and dual PRU make it especially attractive for industrial fieldbus gateways. When designing with this MPU, ensure the PCB uses a 4-layer stackup with a continuous ground plane beneath the NFBGA, a matched-length DDR2/DDR3 interface, and proper power-rail sequencing. The BGA requires X-ray inspection and reflow with peak temperature not exceeding 260 C per JEDEC J-STD-020. This page synthesizes distributor pricing, pin-compatible same-package alternatives, and practical design notes not found in the manufacturer datasheet alone.

USD $13.10 有现货
AM3357BZCZA80 - Sitara ARM Cortex-A8 800MHz MPU | TI
AM3357BZCZA80

AM3357BZCZA80 - Sitara ARM Cortex-A8 800MHz MPU | TI

The Texas Instruments AM3357BZCZA80 is a Sitara ARM Cortex-A8 microprocessor unit (MPU) operating at up to 800 MHz, integrating a single 32-bit core with NEON SIMD engine and a 324-pin NFBGA (15x15 mm) package. Per TI's AM335x datasheet, this silicon is part of the AM335x family that scales features across the Sitara line while retaining a pin-compatible BGA footprint on the 0.8 mm pitch 324-ball array, enabling PCB reuse across the family. The 'A80' speed grade and industrial temperature support make this specific part suited to harsh-environment industrial designs. An ARM Cortex-A8 MPU is a system-on-chip class microprocessor that integrates CPU core, memory controller, graphics, and a wide peripheral set into one BGA. In the taxonomy of computing devices it sits below an application processor SoC and above a microcontroller: an MPU lacks internal flash (relies on external DDR/NOR/NAND) but offers full MMU, OS support (Linux, Android, RTOS), and rich connectivity peripherals (Ethernet, USB, CAN, PRU-ICSS). The AM335x family is widely used as a Linux-capable industrial MPU for HMI, PLC, and gateway products. Key features of the AM3357 include a 32-bit ARM Cortex-A8 core with NEON, 200 MHz of MIPS-class performance headroom, two 32-bit DDR2/DDR3/DDR3L memory controllers with ECC, dual-port 1 Gbps Ethernet switch with IEEE 1588v2 support, two USB 2.0 high-speed ports (one OTG), and on-chip cryptography acceleration (AES, SHA, RNG). Graphics are handled by a programmable 24-bit LCD controller (up to 2048x2048) with touchscreen, and a separate 2D/3D graphics accelerator (SGX530) supports OpenGL ES 2.0. Technical depth: the AM3357 implements the Programmable Real-time Unit Subsystem (PRU-ICSS) with dual 32-bit RISC cores operating at 200 MHz, deterministic I/O latency, and direct access to peripheral pins - enabling industrial protocols such as EtherCAT, Profibus, and PROFINET entirely in firmware. The device is manufactured in a 65 nm process and supports separate 1.8 V / 3.3 V supply rails with on-die LDO/power-management ICs. Typical applications include industrial HMI panels, PLCs, motor drives, barcode scanners, portable data terminals, building automation gateways, and Linux-based IoT edge devices. The wide peripheral mix eliminates external companion chips for most designs. When designing with the AM3357, ensure the PCB stack-up supports 0.8 mm BGA escape routing, provision an external DDR2/DDR3 memory with matched-length traces, and follow TI's Power-Sequencing recommendations for the dual-voltage supply. This page synthesizes distributor pricing, drop-in cross-family alternatives, and PRU-ICSS design notes not found in the manufacturer datasheet.

USD $12.55 有现货
AM3357BZCZD60 - Sitara ARM Cortex-A8 MPU 600MHz | Texas Instruments
AM3357BZCZD60

AM3357BZCZD60 - Sitara ARM Cortex-A8 MPU 600MHz | Texas Instruments

The Texas Instruments AM3357BZCZD60 is a Sitara ARM Cortex-A8 32-bit microprocessor with integrated EtherCAT, PROFIBUS, PRU-ICSS and CAN support, operating at up to 600MHz and housed in a 324-ball NFBGA (15x15 mm) ZCZ package. As a member of TI's AM335x family, the AM3357BZCZD60 combines a single Cortex-A8 core running at 600MHz with two Programmable Real-time Units (PRU-ICSS), industrial protocol acceleration, and a rich peripheral set including two USB 2.0 ports, two Gigabit Ethernet MACs (one industrial-grade with two-port switch), and a 3D graphics engine. The device is qualified for an industrial -40C to +90C operating range and is targeted at deterministic real-time industrial communication. A microprocessor (MPU) is an integrated processing device that integrates a CPU core, memory controller, peripheral controllers and I/O into a single chip, distinguishing it from a microcontroller (MCU) which typically emphasizes on-chip Flash and simpler peripherals. Within the system hierarchy, an MPU sits above basic MCUs and below application processors in computational capability, providing the horsepower to run high-level operating systems such as Linux while maintaining the deterministic I/O needed for industrial control. The Sitara family specifically targets applications requiring a balance of high-level OS support and real-time industrial protocols on a single die. Key features include the Cortex-A8 core with NEON SIMD and VFPv3 floating-point hardware, 32KB L1 instruction and data caches, a 256KB L2 cache, a 32-bit LPDDR1/DDR2/DDR3/mDDR memory controller, two 12-bit ADCs, two USB 2.0 high-speed ports (with one capable of PHY interface), two industrial-grade CAN controllers, two PRU subsystems for deterministic I/O, a real-time clock, an SGX530 3D graphics accelerator, and a LCD controller with WXGA resolution support. The integrated EtherCAT slave controller and PROFIBUS support eliminate the need for an external ASIC, reducing BOM cost for industrial automation designs. The architecture is built on TI's 65nm CMOS process, supports ARMv7-A instruction set, and provides boot sources including SPI, MMC/SD, UART and NAND/NOR Flash. Power management is handled through multiple core voltage domains enabling dynamic frequency scaling and deep sleep modes with RTC retention. A typical 1.1V core supply and 3.3V I/O supply are required, with the integrated LDOs and PMIC companion devices managing the sequencing. Security features include a hardware crypto accelerator (AES, SHA, RNG) and secure boot support through the AM335x ROM bootloader. Typical applications include industrial programmable logic controllers (PLC), human-machine interfaces (HMI), point-of-sale (POS) terminals, industrial gateways, motor control drives with EtherCAT, machine vision systems, portable medical devices, and networked sensors with fieldbus connectivity. The dual-PRU subsystem is especially useful for custom industrial I/O protocols requiring sub-microsecond deterministic response without burdening the Cortex-A8 core. When designing with this device, pay close attention to the DDR3 memory trace impedance and length matching - the DDR3 interface requires careful signal integrity work. The PRU firmware should be developed using TI's PRU-RemoteProc and CCS toolchain. For EtherCAT or PROFIBUS applications, use TI's certified protocol stacks rather than reimplementing from scratch. Refer to TI's AM335x Hardware User Guide and the PRU-ICSS Reference Guide for detailed peripheral programming examples and reference schematics. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet alone.

USD $25.90 有现货
AM3358BZCE60 - Sitara ARM Cortex-A8 MPU 600MHz | TI
AM3358BZCE60

AM3358BZCE60 - Sitara ARM Cortex-A8 MPU 600MHz | TI

The Texas Instruments AM3358BZCE60 is a Sitara ARM Cortex-A8 microprocessor IC integrating a single 32-bit core running at 600 MHz, a POWERVR SGX530 graphics accelerator, dual PRU-ICSS (Programmable Real-Time Unit and Industrial Communication Sub-System) cores, and a rich industrial peripheral set, packaged in a 298-ball NFBGA (ZCE) measuring 13x13 mm. A microprocessor is an integrated circuit that contains one or more CPU cores along with caches, memory controllers, and on-chip peripherals, forming a complete system-on-chip (SoC) for embedded computing. The Sitara family occupies the mid-tier of TI's industrial-grade ARM processors, sitting above the Cortex-M based TM4C and below the Cortex-A9/A15 based OMAP and Jacinto families in terms of performance and integration. AM335x devices are differentiated from Cortex-M microcontrollers by their ability to run high-level operating systems such as Linux and Android. Key features of the AM3358BZCE60 include the ARM Cortex-A8 core with NEON SIMD engine, 32KB L1 instruction cache, 32KB L1 data cache, and 256KB L2 cache; an integrated 3D graphics accelerator supporting OpenGL ES 1.1/2.0; dual 32-bit PRU cores delivering deterministic real-time I/O; on-chip DDR3/LPDDR/LPDDR2/DDR2 memory controller; two industrial Gigabit Ethernet MACs (one with 2-port switch); USB 2.0 with PHY; CAN, SPI, I2C, UART, McASP, and eCAP peripherals. The device targets industrial communication protocols including EtherCAT, PROFIBUS, and PROFINET. Architecturally, the AM3358 pairs a single-issue, in-order Cortex-A8 with hardware graphics and a programmable real-time subsystem. The PRU-ICSS provides cycle-accurate I/O handling independent of the ARM core, enabling industrial protocol stack offload and low-latency fieldbus operation without burdening the HLOS. The ZCE NFBGA package is the lowest-cost AM3358 variant. Typical applications include industrial programmable logic controllers (PLL/PLC), human-machine interfaces (HMI), industrial gateways, barcode scanners, portable data terminals, automated test equipment, and consumer/educational embedded platforms such as the BeagleBone Black. The wide peripheral set also supports point-of-sale terminals and medical patient-monitoring equipment. When designing with this device, follow TI's PowerVR SGX530 driver support, ensure proper DDR3 PCB layout with controlled-impedance routing, and verify industrial protocol firmware availability for the target protocol. The ZCE package has a thermal pad that requires adequate PCB copper for heat dissipation.

USD $13.10 有现货
AM3874CCYE80 - Sitara ARM Cortex-A8 800MHz MPU | Texas Instruments
AM3874CCYE80

AM3874CCYE80 - Sitara ARM Cortex-A8 800MHz MPU | Texas Instruments

The Texas Instruments AM3874CCYE80 is a high-performance Sitara ARM Cortex-A8 microprocessor built on a 45 nm process, integrating one 32-bit core running up to 800 MHz along with NEON SIMD multimedia extensions and a SGX530 graphics accelerator. Housed in a 684-ball FCBGA (CYE) at 23x23 mm, this processor combines CPU, 3D graphics, an HDVPSS video subsystem, and HDMI output on a single die, replacing what traditionally took a CPU plus a discrete video processor. Industrial-grade temperature range is 0C to 90C. A microprocessor (MPU) is an integrated circuit that contains the arithmetic logic unit, control unit, and registers needed to execute software, typically paired with external DRAM, non-volatile storage, and peripherals. The AM3874 sits in the Sitara family of application processors — application processors are MPU subcategory with multimedia, graphics, and high-speed peripherals targeting HMI, industrial vision, and single-board computing workloads. Within TI's processor portfolio, AM3874 belongs to the Cortex-A8 generation that bridges ARM9 and Cortex-A9 performance classes. Key features include one ARM Cortex-A8 core at 800 MHz, ARMv7-A architecture with NEON SIMD coprocessor, a programmable SGX530 graphics core supporting OpenGL ES 1.1/2.0, integrated HDMI transmitter, dual DDR2/DDR3 memory controller up to DDR2-1066, a 10/100/1000 Mbps Gigabit Ethernet MAC, SATA 3 Gbps interface, two USB 2.0 ports (host + on-the-go), and HDVPSS for video encode/decode. Hardware-accelerated cryptography and a dual-core PRU-ICSS programmable real-time unit subsystem are integrated on-die. The AM3874's heterogeneous compute architecture lets the ARM Cortex-A8 host high-level operating systems like Linux while the PRU-ICSS offloads deterministic real-time I/O at sub-microsecond latency. The HDVPSS paired with HDMI 1.3a transmitter delivers 1080p60 display output without an external video encoder, and the SATA interface enables direct attachment of hard-disk or optical-storage subsystems in embedded computing platforms. Typical applications include industrial human-machine interface (HMI) panels, single-board computers, point-of-sale terminals, digital signage media players, medical imaging displays, and machine-vision controllers. The integrated HDMI and graphics pipeline makes it especially well suited for products that previously required a separate system-on-module plus a dedicated video co-processor. When designing with this part, allocate board area for the 684-ball FCBGA and follow TI's escape-routing guidelines for the BGA; the part demands a multi-layer PCB with continuous reference planes for the DDR2/DDR3 interface. Ensure proper thermal management — although the industrial temperature rating goes up to 90C ambient, sustained video workloads benefit from a heatsink or thermal interface material. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet, giving engineers a single, citable reference for selection.

USD $42.75 有现货
AM5728BABCXA - Dual Cortex-A15 1.5GHz Sitara MPU | Texas Instruments
AM5728BABCXA

AM5728BABCXA - Dual Cortex-A15 1.5GHz Sitara MPU | Texas Instruments

The Texas Instruments AM5728BABCXA is a Sitara microprocessor (MPU/SoC) integrating dual ARM Cortex-A15 cores at up to 1.5 GHz, dual C66x floating-point DSP cores, and a PowerVR SGX544 3D graphics accelerator, housed in a 760-ball FCBGA (ABC) package measuring 23x23 mm and rated from -40C to +105C for industrial environments. A microprocessor is a CPU integrated on a single chip that executes instructions and manages data flow in embedded computing systems. The AM5728 is a system-on-chip (SoC) that combines multiple heterogeneous processing cores (ARM and DSP) with memory controllers, peripheral interfaces, and graphics acceleration, forming the computational heart of an embedded system. It sits within the hierarchy: SoC -> microprocessor -> embedded processor -> integrated circuit. Key features include dual 1.5 GHz ARM Cortex-A15 cores for general-purpose OS workloads, dual C66x DSP cores for math-intensive signal processing, a dual-core PRU-ICSS for deterministic real-time industrial Ethernet protocols, DDR3/DDR3L memory support, HDMI and LCD display interfaces, and Gigabit Ethernet, USB 3.0, PCIe, and SATA connectivity. An integrated video acceleration engine handles H.264 encode/decode for multimedia pipelines. Architecturally, the AM5728 uses a heterogeneous multicore design supporting asymmetric (AMP) or symmetric (SMP) multiprocessing. ARM cores run Linux or RTOS workloads while DSP cores offload computationally heavy tasks; the PRU-ICSS provides deterministic low-latency I/O, optimizing performance per watt across diverse workloads. The 760-FCBGA (23x23) 0.8 mm-pitch ball grid array supports high gate density with strong signal integrity for high-speed DDR and SerDes interfaces. Typical applications include industrial PLCs, medical ultrasound systems, human-machine interfaces (HMI), smart grid gateways, and non-safety automotive infotainment - anywhere edge computing requires local processing plus rich connectivity. When designing with this device, ensure adequate multi-rail power delivery and thermal management, following the TI datasheet power-sequencing and decoupling recommendations for reliable operation across the full -40C to +105C industrial range. This page synthesizes distributor availability, drop-in alternatives from the AM57x family, and practical design notes not found in the manufacturer datasheet.

USD $42.50 有现货
AM6528 Sitara MPU Dual Cortex-A53 + R5F 1.1GHz | TI
AM6528

AM6528 Sitara MPU Dual Cortex-A53 + R5F 1.1GHz | TI

The Texas Instruments AM6528 is a Sitara applications processor featuring dual Arm Cortex-A53 cores running up to 1.1 GHz, dual lockstep-capable Arm Cortex-R5F cores at 400 MHz, a Gigabit PRU-ICSS for industrial Ethernet protocols, and integrated 3D graphics acceleration (SGX544). The AM6528BACDXEA variant ships in a 784-ball FCBGA package measuring 23x23 mm. An applications processor (MPU) is a high-performance system-on-chip designed to run a full operating system such as Linux, in contrast to microcontrollers (MCUs) that execute bare-metal or RTOS code. Within the embedded hierarchy, the AM6528 sits at: MPU -> applications processor -> embedded processor -> semiconductor, and occupies the mid-tier of TI's Sitara AM65x family between single-A53 parts and the quad-core AM6548. Key differentiating features include the heterogeneous dual Cortex-A53 + dual Cortex-R5F architecture, which lets Linux handle HMI, networking and connectivity while the R5F cores manage deterministic real-time control. The Gigabit PRU-ICSS offloads industrial protocols such as EtherCAT, PROFINET and EtherNet/IP from the main Arm cores, and the integrated 3D GPU enables graphics-rich HMI panels without an external display processor. The AM65x platform is built to meet the complex processing needs of Industry 4.0 embedded products, per TI's AM654x/AM652x datasheet (SPRSP52C, revised September 2023). Silicon revision 2.1 devices are currently shipping. TI's compare tool positions the AM6528 against the AM6548 and AM6442, with industrial communication software stacks and up to 5 Gigabit Ethernet ports available across the family. Typical applications include industrial HMI panels, PLCs, edge gateways, and motor-drive control systems where real-time determinism and Linux-level connectivity must coexist on a single silicon platform. Design consideration: the 784-FCBGA package demands careful PCB stackup planning; use TI reference designs such as the AM65x GP EVM for power sequencing, DDR4 routing and BGA escape routing guidance. This page synthesizes verified distributor pricing, drop-in family alternatives, and practical design notes not found in the manufacturer datasheet.

USD $13.90 有现货
AM6528BACDXEA - Dual Cortex-A53 1.1GHz Sitara MPU | TI
AM6528BACDXEA

AM6528BACDXEA - Dual Cortex-A53 1.1GHz Sitara MPU | TI

The Texas Instruments AM6528BACDXEA is a Sitara microprocessor (MPU) integrating dual Arm Cortex-A53 cores running at 1.1 GHz, a dual Arm Cortex-R5F MCU subsystem at 400 MHz, and Gigabit-class PRU-ICSS industrial communication subsystems, housed in a 784-pin FCCSP (ACD) package measuring 23x23 mm and rated for -40C to +105C operation. A microprocessor unit (MPU) is the central computation engine of an embedded system, sitting above microcontrollers (MCU) in the processing hierarchy but below application processors in complexity. Modern industrial MPUs like the AM6528 combine an applications-class Arm Cortex-A53 cluster for Linux-based software with a real-time Cortex-R5F lockstep-capable MCU subsystem, enabling a single chip to run both a high-level OS and deterministic real-time control tasks - a partitioning that previously required two separate devices. Key differentiating features include the PRU-ICSSG (Programmable Real-time Unit Industrial Communication Subsystem) with three Gigabit instances, supporting industrial Ethernet protocols such as EtherCAT, PROFINET, and EtherNet/IP in hardware with deterministic latency. A 3D graphics acceleration engine (SGX544 class) enables HMI and visualization workloads. The Cortex-R5F subsystem includes features intended to support functional-safety goals per the TI datasheet for the AM654x/AM652x family (Silicon Revision 2.1 documentation). Architecturally, the AM6528 belongs to the Sitara AM65x generation, built on TI's proven Cortex-A53/R5F heterogeneous multicore approach. The A53 cluster executes Linux or RTOS software, while the R5F cores handle time-critical control loops and safety monitoring, communicating through shared on-chip interconnect and memory subsystems. Typical applications include industrial PLCs and motor drive control heads, factory automation gateways with multi-protocol industrial Ethernet, HMI panels with 3D graphics, and building/energy automation controllers where -40C to +105C operation is required. When designing with this part, plan power sequencing for the multiple core rails and allocate DDR memory bandwidth carefully between the A53 and R5F subsystems; TI provides reference designs and power estimation tools in the AM65x documentation set. This page synthesizes distributor pricing, same-family drop-in alternatives, and practical design notes not found in the manufacturer datasheet.

USD $13.60 有现货