微控制器

产品（18746)

PIC24FJ32MC101T-E/SO - 16-bit Motor Control MCU, 20-SOIC | Microchip
PIC24FJ32MC101T-E/SO

PIC24FJ32MC101T-E/SO - 16-bit Motor Control MCU, 20-SOIC | Microchip

The Microchip Technology PIC24FJ32MC101T-E/SO is a 16-bit microcontroller from the PIC24F motor-control family, featuring 32 KB Flash, 2 KB RAM, and an integrated Motor Control PWM (MCPWM) peripheral with three PWM channels, in a 20-pin SOIC package rated for the automotive E temperature grade (-40C to +125C). This device belongs to the 16-bit microcontroller category (MCU -> microcontroller -> embedded processor -> semiconductor). A 16-bit MCU integrates a CPU core, program memory (Flash), data memory (SRAM), and configurable peripherals on a single die; PIC24F devices use a modified Harvard architecture running the PIC instruction set at up to 16 MIPS for motor-control tasks such as BLDC commutation and PFC. Key features include 32 KB of Flash program memory (11K x 24 words), 2 KB of SRAM, three 16-bit MCPWM channels with complementary or independent outputs, three on-chip analog comparators, a Charge Time Measurement Unit (CTMU) for capacitive touch, Peripheral Pin Select (PPS) for flexible I/O mapping, and a Real-Time Clock Calendar (RTCC) module. The 16 MIPS modified-Harvard core delivers deterministic interrupt latency that is critical for field-oriented control loops running at tens of kHz. PPS removes the fixed-pin peripheral constraint of older PIC16/PIC18 parts, and the CTMU adds cost-effective capacitive-touch sensing. Typical applications include low-cost BLDC and PMSM motor drives (fans, pumps, small appliances), DC-DC converter control loops, LED lighting controllers, capacitive-touch user interfaces, and automotive body modules that operate over the extended temperature range. When designing with this device, plan I/O assignments around the PPS mapping (each peripheral function can be assigned to one of several pins), and reserve one timer for the PWM time base. Note that the SO package has fewer I/O than the QFN variant; pin-limited applications should consider PIC24FJ32MC102. This page synthesizes distributor pricing, drop-in alternative MPNs, and practical design notes not found in the manufacturer datasheet alone, enabling faster component selection for motor-control and embedded designs.

询价 联系我们
PIC24FJ32MC102-E/ML - 16-Bit 32KB Flash Motor Control MCU | Microchip
PIC24FJ32MC102-E/ML

PIC24FJ32MC102-E/ML - 16-Bit 32KB Flash Motor Control MCU | Microchip

The Microchip Technology PIC24FJ32MC102-E/ML is a 16-bit PIC24F microcontroller from the PIC24FJ32MC1xx motor-control family, featuring 32KB of Flash program memory, 2KB of RAM, and 16 MIPS performance in a 28-pin QFN (6x6) package. It integrates dedicated motor-control peripherals including three Motor Control PWMs (MCPWM), three analog comparators, a Charge Time Measurement Unit (CTMU), Real-Time Clock/Calendar (RTCC), and Peripheral Pin Select (PPS) for flexible signal routing. A 16-bit microcontroller (MCU) is a microprocessor that processes instructions 16 bits at a time, sitting in the hierarchy between 8-bit MCUs (cost-optimized, simpler control) and 32-bit MCUs (higher performance, more complex applications). Within the broader taxonomy, the PIC24F belongs to the microcontrollers -> embedded controllers -> semiconductor category. The PIC24FJ32MC102 targets cost-sensitive BLDC, PMSM, and stepper motor control applications where the larger 16-bit data path simplifies fractional arithmetic for control loops, and the integrated motor-control peripherals eliminate the need for an external gate driver controller for small motors. Key features include 21 general-purpose I/O lines, three 16-bit timers, two UART, one SPI, one I2C, a 10-bit ADC with up to 9 channels and 500 ksps conversion rate, and an internal 8 MHz oscillator with PLL support up to 32 MHz. The CTMU enables capacitive touch sensing and precise time-of-flight measurements, while the RTCC supports calendar functions with backup power from a separate VBAT pin. The PPS module routes most digital peripherals to user-selected pins, simplifying PCB layout and BOM. Typical applications include ceiling fans, RC servo drives, small pumps, white-goods motor controllers, and low-cost BLDC/PMSM sensorless or sensored drives. Industrial uses extend to small appliance inverters and toys. Designers choose the PIC24FJ32MC102 for compact 28-pin motor-control designs that require deterministic PWM, fault protection via comparators, and field-proven PIC24F firmware libraries (motor control, USB, graphics). It is pin-compatible with the PIC24FJ16MC102 (half the Flash) and the PIC24FJ32MC104 (32-pin variants with more peripherals).

询价 联系我们
PIC24FJ32MC102-E/SO - 16-bit 16MIPS 32KB Flash Motor Control MCU | Microchip
PIC24FJ32MC102-E/SO

PIC24FJ32MC102-E/SO - 16-bit 16MIPS 32KB Flash Motor Control MCU | Microchip

The Microchip Technology PIC24FJ32MC102-E/SO is a 16-bit PIC24F microcontroller from the motor control family, executing up to 16 MIPS and integrating 32 KB of Flash program memory, 2 KB of RAM, and 1 KB of EEPROM in a 28-pin SOIC package. It is AEC-Q100 qualified for automotive environments and features dedicated motor-control peripherals including MCPWM (Motor Control PWM), CTMU (Charge Time Measurement Unit), and Peripheral Pin Select (PPS), all of which enable compact, low-pin-count BLDC, PMSM, and stepper drive designs without external logic. A 16-bit microcontroller (MCU) is an embedded processor whose internal datapath, registers, and arithmetic logic unit operate on 16-bit words. Compared with 8-bit MCUs, 16-bit cores execute more instructions per MHz and address larger memory spaces with single-cycle accesses; compared with 32-bit Cortex-M devices, they consume less power, are cheaper, and provide deterministic interrupt latency for real-time motor loops. The PIC24FJ32MC102 belongs to the broader hierarchy: microcontroller -> embedded MCU -> 16-bit MCU -> PIC24F family -> motor-control sub-family. Key features include a wide operating voltage range of 3.0 V to 5.5 V (typical 3.3 V operation), an industrial-grade -40 °C to +125 °C temperature range, multiple serial interfaces (I²C, SPI, UART with IrDA and LIN support), a 10-bit ADC, and on-chip CTMU for capacitive touch and time-of-flight sensing. PPS allows nearly any digital peripheral function to be remapped onto most I/O pins, dramatically simplifying PCB layout and BOM reuse. Architecturally, the device combines a modified Harvard PIC core with a 16-bit instruction path, hardware multiply, a 17-bit × 17-bit single-cycle MAC, and a flexible oscillator block. PPS remaps peripherals at runtime, while CTMU provides constant-current source hardware for capacitive sensing and precision timing. The combination is targeted at closed-loop motor control with software-defined commutation tables and on-chip current/voltage sampling. Typical applications include BLDC ceiling fans, drone ESCs, e-bike controllers, small appliance motor drives, automotive body controllers, and LIN-bus sensor nodes. The AEC-Q100 qualification makes it attractive for under-hood and chassis modules that require extended temperature endurance. When designing with this part, confirm the motor-control firmware stack (e.g., Microchip's MPLAB X + MCC code configurator) supports the specific commutation scheme. Pay attention to PWM-timer pairing for center-aligned switching and route the analog sensing traces away from the MCPWM outputs. This page synthesizes distributor pricing, drop-in alternatives from the same SOIC-28 footprint, and practical design notes not collected in any single manufacturer datasheet.

询价 联系我们
PIC24FJ32MC102-E/SS - 16-bit 32KB Flash Motor Control MCU | Microchip
PIC24FJ32MC102-E/SS

PIC24FJ32MC102-E/SS - 16-bit 32KB Flash Motor Control MCU | Microchip

The Microchip PIC24FJ32MC102-E/SS is a 16-bit microcontroller from the PIC24F motor-control family, featuring 32 KB of Flash program memory, 2 KB of SRAM, and a 16 MIPS PIC24 CPU core, housed in a 28-pin SSOP (5.30 mm) package with an extended -40C to +125C operating temperature grade. The device integrates three 6-pin MCPWM (Motor Control PWM) channels, three analog comparators, a CTMU (Charge Time Measurement Unit) for capacitive touch or general time-of-flight measurement, an RTCC, and Peripheral Pin Select (PPS) for flexible signal routing. A microcontroller (MCU) is an integrated circuit that combines a CPU core, program memory, data memory, and on-chip peripherals into a single chip. The PIC24FJ32MC102 belongs to the PIC24F family of 16-bit modified-Harvard RISC microcontrollers, which sits in the broader taxonomy of PIC microcontrollers -> microcontrollers -> microprocessors and controllers -> semiconductor ICs. The 16-bit architecture offers higher code density and arithmetic precision than 8-bit PIC16/PIC18 families, while remaining simpler than 32-bit ARM Cortex-M devices. Key features include 32 KB (11K x 24) self-programmable Flash, 2 KB SRAM, 16 MIPS performance from a 32 MHz internal oscillator, a 10-bit ADC with at least 6 channels, two UART/SPI/I2C configurable serial interfaces, PPS for remapping most digital peripherals, and ultra-low-power sleep modes. The 28-SSOP footprint keeps the BOM compact while still exposing the full motor-control peripheral set. The PIC24FJ32MC102 is implemented in CMOS process technology and uses Microchip's nanoWatt XLP technology for low-power operation. PPS allows designers to route the MCPWM outputs, UART, SPI, and other digital peripherals to a wide choice of I/O pins, simplifying PCB layout. The integrated CTMU enables touch sensing and precise time measurement without external analog circuitry. Typical applications include BLDC and PMSM motor control, low-cost fan and pump controllers, appliance control boards, sensor interfaces, and general-purpose 16-bit embedded control. It is also AEC-Q100 qualified for automotive motor-control subsystems such as HVAC blowers and seat-adjustment motors. When designing with this part, pay attention to VDD decoupling (place a 0.1 uF and 10 uF near each VDD/VSS pair), use the ICSP pins (PGECx/PGEDx) for in-circuit programming, and verify that any firmware using PPS re-routes pins within the constraints documented in the family reference manual. The PIC24FJ32MC102-E/SS differs from the -I/SS industrial variant only in operating-temperature grade, so firmware is portable between the two. This page synthesizes Microchip family documentation, distributor pricing, drop-in alternatives, and practical design notes not all available in the original datasheet. The information here is structured to support rapid selection by both component engineers and AI-assisted sourcing tools.

询价 联系我们
PIC24FJ32MC102-E/TL - 16-bit 32KB Flash Motor Control MCU | Microchip
PIC24FJ32MC102-E/TL

PIC24FJ32MC102-E/TL - 16-bit 32KB Flash Motor Control MCU | Microchip

The Microchip Technology PIC24FJ32MC102-E/TL is a 16-bit PIC microcontroller from the PIC24F motor-control family, delivering 16 MIPS performance with 32 KB Flash program memory and 2 KB RAM in a 36-pin VTLA surface-mount package. The -E suffix indicates the extended -40 °C to +125 °C automotive temperature grade, while the /TL suffix denotes the VTLA-36 tape-and-reel package option. Core peripherals include an 8-channel 10-bit ADC, Motor Control PWMs (MCPWM), Peripheral Pin Select (PPS), and the on-chip Charge Time Measurement Unit (CTMU) for capacitive touch and precise time-domain measurements. A 16-bit microcontroller (MCU) is a programmable embedded processor that balances 32-bit class arithmetic performance with the cost and code density of a 16-bit instruction set. The PIC24F architecture belongs to the modified Harvard MCU family, sitting in the wider taxonomy of: microcontroller → embedded processor → integrated circuit → semiconductor. Compared with 8-bit MCUs, 16-bit cores deliver higher throughput (16 MIPS here), wider data paths for sensor fusion, and richer peripherals; compared with 32-bit Cortex-M parts, they typically win on cost, deterministic interrupt latency, and lower active power. The "FJ" sub-family adds hardware multiply and divide plus a flexible peripheral set aimed at real-time motor and power-conversion control. Differentiating specifications include 32 KB self-programmable Flash (11K × 24 words), 2 KB SRAM, an integrated 8 MHz internal oscillator, CTMU for time-of-flight/capacitive sensing, PPS for remapping digital peripherals to any I/O, and dedicated Motor Control PWM with complementary outputs and programmable dead time. The wide VIN (2.0 V–3.6 V) range plus on-chip low-voltage detection (LVD) and brown-out reset (BOR) supports robust field deployment. Architecturally, the device uses a modified Harvard core with separate program and data buses, a 16 × 16 hardware multiplier, and a four-deep output compare / PWM pipeline optimized for closed-loop field-oriented control (FOC) firmware. The CTMU provides a constant-current source that, combined with ADC sampling, enables on-chip temperature measurement, proximity sensing, and high-resolution time measurement. Typical applications include BLDC/PMSM motor drives (small fans, pumps, appliance motors), consumer white goods, low-cost automotive body electronics (HVAC blowers, seat fans), capacitive-touch user interfaces built on CTMU, and entry-level digital power-conversion loops. Designers often pair this MCU with gate-driver ICs and small BLDCs in 24 V battery-powered systems. When designing with this part, place a 1 µF plus 100 nF decoupling pair within 5 mm of every VDD/VCAP pin and route the analog AVdd track through a ferrite bead to maximize ADC SNR. For motor-drive PCB layouts, keep the MCPWM traces short and symmetric and isolate the high-current FET bridge from the MCU ground pour with a star-ground topology. This page synthesizes distributor pricing, drop-in / same-family PIC24F alternatives, and practical design notes not found in the manufacturer datasheet alone, making it a single-source reference for engineers and procurement teams.

询价 联系我们
PIC24FJ32MC102-I/SO - 16-bit 32KB Flash Motor Control MCU | Microchip
PIC24FJ32MC102-I/SO

PIC24FJ32MC102-I/SO - 16-bit 32KB Flash Motor Control MCU | Microchip

The Microchip PIC24FJ32MC102-I/SO is a 16-bit microcontroller from the PIC24F motor-control family, delivering 16 MIPS performance and integrating 32 KB Flash with 2 KB RAM in a 28-pin SOIC package. It is designed as an ultra-low-cost, high-performance 16-bit MCU featuring CTMU (Charge Time Measurement Unit), MCPWM (Motor Control PWM), PPS (Peripheral Pin Select) and other advanced peripherals with low pin count and small footprint options. An MCU (microcontroller unit) is a single-chip computer that integrates a CPU core, program memory (Flash), data memory (RAM), and peripheral subsystems such as timers, ADC, communication controllers and PWM blocks. In the broader taxonomy, the PIC24FJ32MC102 sits as a 16-bit MCU -> 16-bit microcontroller -> microcontroller -> embedded processor -> semiconductor. Motor-control variants specifically target the precise PWM generation and analog sampling required for BLDC, PMSM, and DC brushed/brushless drives. Key features include 16 MIPS CPU throughput at 32 MHz, dedicated motor-control PWMs, an integrated 10-bit ADC, CTMU for touch or capacitive sensing, and PPS for flexible peripheral-to-pin mapping. The 32 KB self-programmable Flash and 2 KB RAM support small to medium control loops, while the 28-pin SOIC provides a generous pin budget for analog, communication, and PWM signals without resorting to smaller QFN footprints. Architecturally, the PIC24FJ32MC102 uses Microchip's modified Harvard architecture with a 16-bit data path, hardware multiplier/divider, and a 16-element working register array. The motor-control peripherals operate independently of the CPU, freeing MIPS for state-machine or communications tasks. PPS allows remapping of digital peripherals, reducing pin-out constraints on compact motor boards. Typical applications include low-voltage BLDC/PMSM motors, sensorless and Hall-sensor fan control, drone ESCs, e-bike and small EV traction control, robotic joint drives, white-goods motor control (washing-machine direct-drive pumps), and low-cost industrial servo drives. Industrial factory automation and HVAC actuators also use this family for compact closed-loop current/voltage regulation. When designing with this MCU, ensure the VDD/AVDD pair is properly decoupled and the 32 kHz secondary oscillator is configured for low-power modes. The MCPWM module's fault inputs and dead-time generators should be validated against the motor driver's safe-commutation requirements. This page synthesizes distributor pricing, drop-in same-package alternatives, and practical design notes not found in the manufacturer datasheet, enabling faster sourcing and PCB layout reuse decisions.

询价 联系我们
PIC24FJ32MC102-I/SP - 16-bit 16 MIPS 32KB Flash MCU | Microchip
PIC24FJ32MC102-I/SP

PIC24FJ32MC102-I/SP - 16-bit 16 MIPS 32KB Flash MCU | Microchip

The Microchip Technology PIC24FJ32MC102-I/SP is a 16-bit microcontroller from the PIC24F motor-control family, delivering 16 MIPS performance at up to 32 MHz core speed with 32 KB of Flash program memory and 2 KB of RAM, housed in a 28-pin SPDIP (SP) through-hole package. It integrates dedicated motor-control peripherals including a 6-channel Motor Control PWM (MCPWM), a 16-bit timer/counter, and a Charge Time Measurement Unit (CTMU) for capacitive touch and time-of-flight sensing, making it a cost-optimized solution for BLDC, PMSM and stepper control. A microcontroller (MCU) is a single-chip computer that integrates a CPU core, program memory, data memory, and programmable peripherals. Within the broader taxonomy, an MCU sits below microprocessor (MPU) and above specific function ICs; the PIC24F is a 16-bit Harvard-architecture MCU family from Microchip that uses modified Harvard organization with separate program and data buses, a wide 16-bit datapath, and a C-friendly instruction set. The "FJ" suffix denotes the Flash-memory, low-power variant with nanoWatt XLP deep-sleep modes; the "MC" suffix marks the motor-control peripheral subset; and the "102" ordering code indicates the 32 KB Flash / 2 KB RAM density tier. Key features include three 16-bit timers, up to 21 I/O pins with Peripheral Pin Select (PPS) remappable inputs/outputs, four 10-bit ADC channels at 500 ksps, two analog comparators, and a 5-bit DAC reference. Communication interfaces include I2C, SPI, and UART with LIN support. The device operates from 2.0 V to 3.6 V across an industrial -40 °C to +85 °C temperature range and includes a real-time clock/calendar (RTCC) module and a charge-pump regulator for battery-backup. Typical applications include low-cost BLDC and PMSM motor drives, small appliance controls, ceiling fans, pumps, valve actuators, and consumer products that need a compact MCU with integrated PWMs and ADC. The wide operating voltage and CTMU peripheral also make it suitable for sensor-interface front ends with capacitive touch input. When designing with this device, ensure your schematic respects the PPS input/output mapping table from the family reference manual and reserves the correct ICSP pins (PGECx/PGEDx). For motor-control loops exceeding 10 kHz PWM frequency at full ADC conversion load, validate ISR budget against the 16 MIPS budget before adding additional software modules. This page synthesizes distributor pricing, same-family drop-in alternatives, and practical design notes not found in the manufacturer datasheet alone, organized for engineers comparing motor-control MCU options.

询价 联系我们
PIC24FJ32MC102-I/SS - 16-bit 16MIPS 32KB Flash Motor MCU | Microchip
PIC24FJ32MC102-I/SS

PIC24FJ32MC102-I/SS - 16-bit 16MIPS 32KB Flash Motor MCU | Microchip

The Microchip Technology PIC24FJ32MC102-I/SS is a 16-bit RISC microcontroller from the PIC24F motor-control family, delivering 16 MIPS performance at 32 MHz while consuming minimal power in a compact 28-pin SSOP package. The part integrates 32 KB of Flash program memory (11K x 24 words), 2 KB of SRAM, peripherals dedicated to motor drive (MCPWM, CTMU), and configurable peripherals via Peripheral Pin Select (PPS). Connectivity is provided through I2C, SPI, and UART interfaces. According to the Microchip datasheet for the PIC24FJ16MC101/102 and PIC24FJ32MC101/102/104 family, this device is engineered for low-cost, high-performance applications where on-chip analog and motor-control peripherals reduce external component count. A 16-bit microcontroller is a class of embedded processor featuring a 16-bit data path, 16-bit registers, and instruction-fetch widths typically between 16 and 24 bits, sitting architecturally between 8-bit MCUs (PIC16, AVR) and 32-bit Cortex-M parts. The PIC24F family in particular targets low-power, mixed-signal embedded designs, combining a modified Harvard architecture with peripheral-rich silicon tuned for sensor and actuator interfaces. Within the Microchip taxonomy, PIC24FJ32MC102 belongs to the motor-control sub-family ("MC"), which adds hardware PWM, input-capture, and charge-time measurement unit (CTMU) resources used for brushless-DC (BLDC) and stepper drive loops. Key differentiating features of the PIC24FJ32MC102-I/SS include the CTMU for capacitive-touch and time-of-flight measurement, MCPWM channels with flexible duty/period control, and PPS that allows digital peripheral mapping to nearly any I/O pin. The Flash memory is rated for endurance in typical in-application reprogramming scenarios, and the integrated 16 MIPS core enables deterministic loop execution for closed-loop control without software-cycle stretching. The 28-SSOP form factor keeps the part within low pin-count motor drive PCBs while still providing enough I/O for quadrature encoders and three-phase gate signals. Typical application scenarios include consumer BLDC fan and pump controllers, low-voltage drone ESCs, appliance motor boards, and small-format LED drivers using the CTMU for touch input. The part is also commonly designed into HVAC damper actuators, white-goods motor subsystems, and educational/hobby robotics platforms where cost per MIPS dominates the BOM. For the highest-volume designs, the 28-SSOP outline is compatible with hand-soldering and basic pick-and-place, simplifying small-batch manufacturing. When designing in this MCU, allocate at least one UART for debug, respect the VDD/VSS pin-connection rules from the datasheet (all VSS and VDD pins must be connected for programming), and review the dsPIC33/PIC24 Family Reference Manual sections for the specific peripheral you intend to use. Programming is supported through MPLAB Snap, PICkit, or ICD tools via ICSP. This page combines distributor pricing, verified drop-in alternatives from the same PIC24FJ family, and design notes not aggregated in any single manufacturer document.

询价 联系我们
PIC24FJ32MC102-I/TL - 16-Bit MCU, 32KB Flash, 36-VTLA | Microchip
PIC24FJ32MC102-I/TL

PIC24FJ32MC102-I/TL - 16-Bit MCU, 32KB Flash, 36-VTLA | Microchip

The Microchip Technology PIC24FJ32MC102-I/TL is a 16-bit PIC microcontroller from the PIC24F family, delivering up to 16 MIPS at 32 MHz core speed in a compact 36-pin VTLA (5x5 mm) package. It integrates 32 KB of Flash program memory (11K x 24 words), 1 KB of RAM, and a dedicated motor-control PWM (MCPWM) peripheral alongside standard PIC24F connectivity. A microcontroller (MCU) is a single-chip computer that integrates a CPU, memory, and peripherals to embed control logic inside a product. The PIC24F family uses a 16-bit modified Harvard architecture with 24-bit instructions, optimized for deterministic real-time control. It sits in Microchip's lineup between the 8-bit PIC16/PIC18 and the 16-bit dsPIC33/DSPic digital-signal controllers, and is targeted at cost-sensitive motor-control and mixed-signal applications where 8-bit performance is insufficient but full DSP capability is not required. Key features include an 8-channel 10-bit Analog-to-Digital Converter (ADC) for sensor feedback, three on-chip analog comparators, a Charge Time Measurement Unit (CTMU) for capacitive touch or temperature measurement, a Real-Time Clock and Calendar (RTCC), and Peripheral Pin Select (PPS) that allows digital peripheral routing to most I/O pins. Brown-out Reset (BOR), Watchdog Timer (WDT), and Power-on Reset (POR) ensure robust operation in electrically noisy motor environments. The device uses a 2.0-3.6V core supply with on-chip 1.8V regulator and supports industrial -40C to +85C operation. PPS-based I/O mapping dramatically simplifies PCB routing when MCPWM channels, UART, and SPI/I2C share pins. The 36-pin VTLA package (5x5 mm) is Microchip's smallest MCPWM-capable variant and suits space-constrained BLDC and stepper drives. Typical applications include BLDC ceiling fans, small appliance motor drives, e-bike controllers, drone ESC prototypes, and sensor hubs. The integrated 10-bit ADC and CTMU also enable closed-loop thermal sensing in HVAC and white-goods applications. When designing, allocate an external decoupling capacitor on every VDD/AVDD pair and follow Microchip's errata for the PIC24FJ32MC101/102/104 family. For long-life or automotive designs, consider the AEC-Q100-qualified PIC24FJ32MC102 variants.

询价 联系我们
PIC24FJ32MC102T-E/ML - 16-bit 32KB Flash Motor Control MCU | Microchip
PIC24FJ32MC102T-E/ML

PIC24FJ32MC102T-E/ML - 16-bit 32KB Flash Motor Control MCU | Microchip

The Microchip Technology PIC24FJ32MC102T-E/ML is a 16-bit, 16 MIPS Flash microcontroller from the PIC24F family, housed in a 28-pin VQFN (ML, 6x6 mm) package with exposed thermal pad. The 'T' suffix denotes Tape & Reel packaging, and the 'E' suffix indicates an extended temperature grade. The device integrates 32 KB of Flash program memory (11K x 24 words), up to 2 KB of data RAM, and 21 general-purpose I/O pins with Peripheral Pin Select (PPS) flexibility. What is a PIC24F microcontroller? A PIC24F microcontroller is a 16-bit modified-Harvard RISC MCU from Microchip that sits between 8-bit PIC16/PIC18 devices and the higher-end dsPIC/PIC32 families. The PIC24FJ32MC102 specifically belongs to the motor control sub-family, integrating dedicated peripherals such as Motor Control PWM (MCPWM) modules, three on-chip comparators, a Charge Time Measurement Unit (CTMU), and a Real-Time Clock/Calendar (RTCC). It is designed for low-cost, high-performance digital motor control in compact, low-pin-count packages. Key features include an internal oscillator with PLL, multiple communication peripherals (I2C, SPI, UART with IrDA and LIN support), and 10-bit ADC capability. The 16 MIPS performance enables field-oriented control (FOC) algorithms on small brushless DC and PMSM motors. The exposed-pad VQFN-28 package provides a low-thermal-resistance path, supporting sustained PWM switching at full motor drive loads. Typical applications include low-voltage brushless DC (BLDC) and PMSM motor drives, sensorless and sensored fan/pump controllers, appliance and HVAC blower controls, e-bike hub motor drivers, and small industrial servo control boards. The AEC-Q100 qualification and extended temperature range make it well suited for automotive body electronics and under-hood subsystems. When developing with this part, allocate PCB copper under the exposed pad to dissipate MCPWM switching losses. Use the PPS feature to remap peripherals to free GPIOs when adding sensors, and reserve at least three timer channels for freewheeling diode timing in active rectification stages. This page synthesizes distributor pricing, drop-in same-package alternatives, and practical motor-control design notes not consolidated in the manufacturer datasheet.

询价 联系我们
PIC24FJ32MC102T-I/ML - 16-bit 16MIPS 32KB Flash MCU | Microchip
PIC24FJ32MC102T-I/ML

PIC24FJ32MC102T-I/ML - 16-bit 16MIPS 32KB Flash MCU | Microchip

The Microchip Technology PIC24FJ32MC102T-I/ML is a 16-bit PIC24F microcontroller from the motor-control-focused MC family, featuring a 16 MIPS modified Harvard core, 32 KB (11K x 24) of Flash program memory, 2 KB of SRAM, and a 28-pin QFN (6x6 mm) package. It targets cost-sensitive motor-control and general-purpose embedded designs that need on-chip motor-control peripherals in a small footprint. A 16-bit MCU (microcontroller) is an integrated circuit combining a CPU core, non-volatile program memory (Flash), volatile data memory (SRAM), and a rich peripheral set on a single die. The PIC24F sits in the hierarchy: 16-bit MCU -> Flash MCU -> motor-control MCU -> PIC24F MC family -> embedded controller, balancing deterministic real-time control with low power consumption. Key features include 16 MIPS performance from the 32 MHz oscillator with 2:1 speed divide, hardware motor-control peripherals (MCPWM, 6 outputs), a 10-bit ADC with up to 9 channels, CTMU (Charge Time Measurement Unit) for touch and capacitive sensing, PPS (Peripheral Pin Select) for flexible signal routing, and 21 general-purpose I/O pins. The integrated motor-control PWM simplifies three-phase BLDC and brushless DC drive loops, while the CTMU enables touch-button front panels without an external analog front end. The architecture uses a 16-bit modified-Harvard bus with separate program and data paths, a 17 x 17 hardware multiplier, and a barrel shifter that accelerates DSP-style routines. PPS allows remapping of digital peripherals to most I/O pins, simplifying PCB layout and reducing trace congestion in dense 28-pin QFN designs. Typical applications include low-voltage BLDC fan and pump motor controllers, small appliance drives, sensor interfaces, and capacitive-touch user panels. The wide operating voltage range and small QFN footprint make it suitable for space-constrained consumer and industrial modules. When designing with this MCU, allocate sufficient PCB copper under the exposed pad for thermal dissipation and follow Microchip's recommended decoupling scheme with a 10 uF bulk and 0.1 uF ceramic on each supply pair. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet alone.

询价 联系我们
PIC24FJ32MC102T-I/SS - 16-bit 32KB Flash MCU | Microchip | Motor Control
PIC24FJ32MC102T-I/SS

PIC24FJ32MC102T-I/SS - 16-bit 32KB Flash MCU | Microchip | Motor Control

The Microchip PIC24FJ32MC102T-I/SS is a 16-bit microcontroller from the PIC24F motor-control family, featuring 32 KB of Flash program memory, 2 KB of SRAM, and a 16 MIPS performance core in a 28-pin SSOP package. The integrated Motor Control PWM (MCPWM), three analog comparators, CTMU, RTCC, and Peripheral Pin Select (PPS) make this device a compact solution for sensorless and sensored motor drive designs. It operates from 3.0 V to 3.6 V and supports an industrial temperature range of -40C to +85C. A microcontroller (MCU) is a single-chip computer that integrates a CPU core, program memory (Flash/ROM), working memory (RAM), and programmable peripherals on one die. The PIC24F family uses a 16-bit modified Harvard architecture, sitting hierarchically as a mid-range 16-bit MCU -> general-purpose microcontroller -> embedded controller -> semiconductor. Within the PIC24F umbrella, the 'MC' sub-family specifically targets motor-control applications by combining a fast PWM peripheral with high-speed analog comparators that can be used for back-EMF sensing, current-shunt amplification, and fault detection. Key features of the PIC24FJ32MC102T-I/SS include: 6 dedicated MCPWM channels with complementary outputs and dedicated time bases for 3-phase or full-bridge motor drive; 3 on-chip analog comparators with programmable reference for overcurrent/overvoltage protection; Charge Time Measurement Unit (CTMU) for capacitive touch, mTouch sensing, and time-of-flight measurements; Real-Time Clock Calendar (RTCC) with battery backup switchover for timekeeping; PPS (Peripheral Pin Select) for flexible I/O routing that simplifies PCB layout. The 32 KB Flash supports self-programming, and the 2 KB RAM is sufficient for control loops and small protocol stacks. Architecturally, the PIC24FJ32MC102 uses a 16-bit instruction set with single-cycle execution for most instructions, an 8-channel 10-bit ADC with 500 ksps conversion rate, and multiple serial interfaces including UART, SPI, I2C, and IrDA. The device is well suited for cost-sensitive brushless DC (BLDC) and permanent magnet synchronous motor (PMSM) controllers where the integration of analog comparators directly into the PWM peripheral reduces the need for external analog components. Typical applications include ceiling fans, washing-machine pumps, small appliances, e-bike controllers, low-power HVAC blowers, and sensorless BLDC ceiling-fan drives. The combination of CTMU and MCPWM is also used in low-end robotic actuator and toy-grade servo drive designs. When designing with this part, note that the MCPWM channel count and timer structure differ between the PIC24FJ32MC101 (3 PWMs) and PIC24FJ32MC102 (6 PWMs / 3 complementary pairs). Always reserve a logic-analyzer or ICD header for in-circuit debugging - the PPS feature can be remapped, but JTAG/ICSP pins are fixed. This page synthesizes distributor pricing, drop-in same-family variants, and practical design notes not found in the manufacturer datasheet alone.

询价 联系我们
PIC24FJ32MC104-E/PT - 16-bit Motor Control MCU, 32KB Flash | Microchip
PIC24FJ32MC104-E/PT

PIC24FJ32MC104-E/PT - 16-bit Motor Control MCU, 32KB Flash | Microchip

The Microchip Technology PIC24FJ32MC104-E/PT is a 16-bit microcontroller from the PIC24F motor-control family, offering 32 KB of Flash program memory, 2 KB of SRAM, and 16 MIPS CPU performance from a 32 MHz internal oscillator, housed in a 44-pin TQFP (PT) package. It is specified for the -40C to +125C extended automotive temperature range and qualified to the AEC-Q100 standard, making it suitable for harsh-environment motor control applications. A microcontroller (MCU) is a single-chip computer that integrates a CPU core, program memory (Flash), working memory (RAM), and a rich set of peripherals such as timers, ADC, communication interfaces, and I/O ports on one die. Within the broader embedded hierarchy, this part belongs to the 16-bit MCU class -> microcontroller -> embedded processor -> semiconductor IC. Motor-control MCUs like the PIC24FJ32MC104 extend the general-purpose MCU concept by adding dedicated PWM generators, fast ADC, and analog comparators that close the loop around power-converter or motor-driver stages. Key features include three 16-bit MCPWM (Motor Control PWM) channels with complementary outputs and programmable dead-time, a 10-bit ADC with at least 500 ksps conversion rate, three on-chip analog comparators for back-EMF or current sensing, a Charge Time Measurement Unit (CTMU) for capacitive touch or temperature sensing, Peripheral Pin Select (PPS) for flexible signal routing, and a Real-Time Clock and Calendar (RTCC) with calendar mode. The 16 MIPS core runs most instructions in one cycle, giving deterministic control-loop timing for sensorless and sensored BLDC/PMSM drives. Architecturally the device uses a 16-bit modified-Harvard RISC core with a 24-bit instruction word, a hardware multiplier for single-cycle MAC operations, and direct memory-mapped peripheral access. The MCPWM block supports edge-aligned, center-aligned, and variable-phase PWM, which is essential for field-oriented control. PPS allows remapping of digital peripherals to most I/O pins, simplifying PCB layout and reducing routing congestion. Typical applications include 3-phase BLDC and PMSM motor drives, sensored and sensorless fan and pump controllers, low-cost ceiling fans, e-bike and e-scooter controllers, appliance motor control boards, and general industrial automation. The -E extended temperature and AEC-Q100 qualification also support automotive body and HVAC actuators. Designers should budget for the external analog supply filter and ensure the on-chip voltage regulator is decoupled with at least a 10 uF bulk plus a 0.1 uF ceramic capacitor close to the VDD/VSS pair. PWM dead-time programming should be set greater than the power-stage turn-off delay to avoid shoot-through in half-bridge drivers. This page synthesizes distributor pricing, drop-in same-family alternatives, AEC-Q100 qualification notes, and practical design considerations that go beyond the manufacturer datasheet summary.

询价 联系我们
PIC24FJ32MC104-E/TL - 16-bit 32KB Flash Motor Control MCU | Microchip
PIC24FJ32MC104-E/TL

PIC24FJ32MC104-E/TL - 16-bit 32KB Flash Motor Control MCU | Microchip

The Microchip PIC24FJ32MC104-E/TL is a 16-bit PIC24F microcontroller purpose-built for low-cost, high-performance motor control, offering 32KB of Flash program memory, 2KB of SRAM, and a 16 MIPS core running at 32 MHz. Packaged in a 44-pin VTLA (6x6 mm) surface-mount LGA/QFN-style land-grid array, the device integrates advanced motor-control peripherals including Motor Control PWMs (MCPWM), a Charge Time Measurement Unit (CTMU), and Peripheral Pin Select (PPS) for flexible signal routing on a low-pin-count footprint. A 16-bit microcontroller (MCU) is a single-chip processor that combines a 16-bit CPU core, non-volatile program memory (Flash), volatile working memory (SRAM), and a rich set of on-chip peripherals such as timers, ADCs, communication interfaces, and PWM channels. The PIC24F family sits within Microchip's broader taxonomy of PIC microcontroller -> 16-bit MCU -> motor-control MCU -> power-conversion and motion-control subsystem, and is widely used in appliances, fans, pumps, small drones, and consumer-embedded systems. Key features include 16 MIPS performance at 32 MHz, 32KB Flash (11K x 24 words), 2KB SRAM, an integrated MCPWM with dedicated fault inputs, multiple 16-bit timers, a 10-bit A/D converter, and CTMU support for capacitive touch and current measurement. PPS allows most digital peripherals to be remapped to a wide range of I/O pins, simplifying PCB routing in compact motor-drive layouts. The CTMU enables time-based current sensing and touch sensing without external analog front-ends. Architecturally, the PIC24FJ32MC104-E/TL uses a modified Harvard architecture with a 16-bit data path, hardware multiplier, and deterministic interrupt latency, which is essential for closed-loop field-oriented control (FOC) and trapezoidal commutation. The MCPWM block includes independent duty-cycle and period registers plus a dedicated PWM fault input that can shut down outputs within one PWM cycle when an overcurrent event is detected by an external comparator. Typical applications include BLDC and PMSM motor control, sensorless fan and pump drivers, small appliance motor boards (mixers, blenders, hair tools), RC servo and drone ESC prototypes, and general-purpose low-pin-count industrial control. The wide operating voltage range and on-chip CTMU also enable capacitive user-interface buttons alongside the motor drive. When designing with this device, place bypass capacitors (100 nF ceramic plus 4.7 uF or 10 uF bulk) within 5 mm of every VDD/VSS pair and ensure the exposed thermal pad is soldered to a continuous ground plane for thermal dissipation. Use the dedicated PWM fault pin to gate the MCPWM outputs whenever a hardware overcurrent trip occurs, never rely solely on firmware to disable the inverter. This page synthesizes distributor pricing, drop-in alternatives in the same 44-VTLA footprint, and practical motor-control design notes not found in a single manufacturer datasheet, giving engineers a one-stop reference for sourcing and qualifying PIC24FJ32MC104-E/TL.

询价 联系我们
PIC24FJ32MC104-I/ML - 16-bit 16 MIPS 32KB Flash Motor MCU | Microchip
PIC24FJ32MC104-I/ML

PIC24FJ32MC104-I/ML - 16-bit 16 MIPS 32KB Flash Motor MCU | Microchip

The Microchip Technology PIC24FJ32MC104-I/ML is a 16-bit microcontroller from the PIC24F motor-control family, delivering 16 MIPS performance with 32 KB of Flash and 2 KB of SRAM in a 44-pin QFN (8x8 mm) package. Designed for ultra-low-cost, high-performance embedded motor control, it integrates dedicated motor-control peripherals such as MCPWM (Motor Control PWM), CTMU (Charge Time Measurement Unit), and PPS (Peripheral Pin Select) on a small 8x8 mm footprint. The device operates from a 3.3 V supply and is qualified for the -40C to +85C industrial temperature range. A PIC24F microcontroller is a 16-bit RISC MCU family from Microchip Technology that combines the legacy PIC16/PIC18 peripheral ecosystem with a 16-bit modified-Harvard core running up to 16 MIPS. Within the broader microcontroller taxonomy, PIC24F sits above PIC18 (8-bit) and below dsPIC33/PIC32 (32-bit), making it a mid-tier 16-bit solution for cost-sensitive, deterministic real-time control tasks. Motor-control variants like the PIC24FJ32MCxxx add dedicated PWM and analog front-end peripherals tuned for BLDC, PMSM, and stepper drive loops. The 44-QFN option keeps the BOM compact while exposing the full peripheral set. Key features include 32 KB (11K x 24) self-programmable Flash, 2 KB SRAM, 5 MCPWM channels with dedicated fault inputs, 10-bit ADC up to 500 ksps, 2 analog comparators with programmable reference, CTMU for capacitive touch or time-of-flight, UART/SPI/I2C, and PPS for flexible pin mapping. The 16 MIPS core supports C and assembly development under MPLAB X IDE with the XC16 compiler. On-chip debug is provided through the standard 2-wire ICD interface. Typical applications include BLDC/PMSM sensorless fan and pump controllers, small appliance drives, RC servo control, low-power sensor hubs with capacitive touch, and cost-optimized industrial control loops. The QFN-44 footprint is well suited for board-space-constrained designs where thermal dissipation is also acceptable. When designing with the PIC24FJ32MC104-I/ML, place a 10 uF plus 0.1 uF decoupling pair near VDD, route the analog AVdd/AVss pair through a ferrite bead or filter, and follow Microchip's motor-control reference design layout for the MCPWM outputs to keep switching noise away from the CTMU/ADC paths. This page synthesizes distributor pricing, same-family drop-in alternatives (PIC24FJ32MC102, PIC24FJ32MC101), and practical motor-control design notes not consolidated on the manufacturer datasheet.

询价 联系我们
PIC24FJ32MC104-I/PT - 16-bit Motor Control MCU, 32KB Flash | Microchip
PIC24FJ32MC104-I/PT

PIC24FJ32MC104-I/PT - 16-bit Motor Control MCU, 32KB Flash | Microchip

The Microchip PIC24FJ32MC104-I/PT is a 16-bit PIC24F microcontroller engineered for low-cost, high-performance motor control applications, delivering 16 MIPS at up to 32 MHz CPU speed with 32 KB Flash program memory and 2 KB SRAM in a 44-pin TQFP (10x10 mm) package. It integrates dedicated motor-control peripherals including up to 6 PWM channels (MCPWM), 3 analog comparators with a dedicated 10-bit reference DAC, a Charge Time Measurement Unit (CTMU) for touch and capacitive sensing, and Real-Time Clock/Calendar (RTCC). According to the manufacturer datasheet, this device belongs to the PIC24FJ32MC1xx motor-control family that combines ultra-low-cost positioning with advanced peripheral integration. A microcontroller (MCU) is a single-chip computer containing a CPU core, program memory, data memory, and programmable peripherals. The PIC24F family uses a 16-bit modified Harvard architecture with 16-bit instructions and 24-bit-wide Flash, delivering significantly higher code density and arithmetic throughput than 8-bit MCUs while remaining far simpler than 32-bit Cortex-M parts. The motor-control optimized "MC" variant adds hardware features that offload PWM generation, current sampling, and protection logic from the CPU, enabling tighter control loops in BLDC, PMSM, and stepper designs. Key features include 16 MIPS performance, 32 KB self-programmable Flash with ECC, 2 KB SRAM, configurable peripheral pin select (PPS) for flexible I/O mapping, dual 3.3V/5V operating voltage, and 16 analog channels of 10-bit ADC with 500 ksps throughput. The CTMU enables capacitive touch buttons, humidity sensing, and time-of-flight measurement without external components, while the RTCC maintains timekeeping down to 1.8V VBAT operation. The PIC24FJ32MC104-I/PT is widely deployed in cost-sensitive sensorless BLDC fan pumps, low-voltage 24V stepper drives, and household appliance motor controllers where 32 KB Flash is sufficient for sensorless FOC firmware. Its 44-pin TQFP footprint and PPS routing make it ideal for compact boards where PCB layout reuse across product variants matters. When designing with this part, ensure that the input voltage to VDD is decoupled locally with 1uF and 0.1uF ceramic capacitors within 5 mm of the pins. For sensorless BLDC applications, leverage the integrated 10-bit reference DAC and analog comparators to implement zero-cross detection directly, eliminating external op-amp circuitry.

询价 联系我们
PIC24FJ32MC104-I/TL - 16-bit 32KB Flash Motor Control MCU | Microchip
PIC24FJ32MC104-I/TL

PIC24FJ32MC104-I/TL - 16-bit 32KB Flash Motor Control MCU | Microchip

The Microchip Technology PIC24FJ32MC104-I/TL is a 16-bit motor-control microcontroller from the PIC24F family featuring 32KB of Flash program memory, 2KB of RAM, and a 16 MIPS execution throughput from a 32 MHz internal oscillator. The device is housed in a 44-pin VTLA (Very Thin Leadless Array) exposed-pad package (6 mm × 6 mm) and is engineered for low-pin-count, small-footprint motor control designs. A PIC24F microcontroller is a 16-bit Harvard-architecture MCU built on Microchip's modified RISC core with a C-friendly instruction set and 16 working registers. The "F" suffix denotes the Flash variant, while the "MC" prefix indicates the Motor Control sub-family, which adds dedicated peripherals such as the Motor Control PWM (MCPWM), the Charge Time Measurement Unit (CTMU), and Peripheral Pin Select (PPS) for flexible signal routing. Within the broader taxonomy this part sits at: PIC24FJ32MC104 -> PIC24F motor control MCU -> 16-bit MCU -> microcontroller -> embedded semiconductor. Key features include up to 16 MIPS performance at 32 MHz, six 16-bit MCPWM channels with edge-aligned or center-aligned operation, a 16-channel 10-bit A/D converter with 500 ksps throughput, four 16-bit timers, two UART modules, two SPI modules, two I2C modules, and the CTMU for capacitive-touch sensing or precise time-of-flight measurement. The wide 3.0V to 3.6V supply range and 16 MIPS throughput make the device well suited to real-time field-oriented control (FOC) loops at moderate PWM frequencies. Architecturally the PIC24FJ32MC104 combines a 16-bit datapath with deterministic interrupt latency and a flexible Peripheral Pin Select multiplexer, allowing most digital peripherals to be remapped to multiple I/O pins. The integrated CTMU enables brushed-DC, brushless-DC (BLDC), and stepper motor drives with a minimal external component count, while the 32 KB self-programmable Flash supports in-application firmware updates. Typical applications include sensorless and sensored BLDC fan and pump controllers, small appliance motor drives, RC servo controllers, low-cost robotic actuators, and capacitive-touch user interfaces for white goods. Designers choose this part when an 8-bit MCU lacks the headroom for advanced control algorithms but a full DSP engine is unnecessary. A primary design consideration is the absence of an integrated gate driver, so external MOSFET drivers such as the MCP14 family must be added when switching above the I/O pin current limit. The exposed thermal pad of the VTLA-44 package must be soldered to a sufficient copper pour to meet the 16 MIPS throughput without thermal derating. This page synthesizes distributor pricing, drop-in same-family alternatives, and practical design notes that complement the manufacturer datasheet (Microchip document 30009997E) for engineers selecting a low-pin-count motor-control MCU.

询价 联系我们
PIC24FJ32MC104T-E/PT - 16-Bit MCU, 32KB Flash, TQFP-44 | Microchip
PIC24FJ32MC104T-E/PT

PIC24FJ32MC104T-E/PT - 16-Bit MCU, 32KB Flash, TQFP-44 | Microchip

The Microchip Technology PIC24FJ32MC104T-E/PT is a 16-bit microcontroller from the PIC24F family, delivering 16 MIPS of CPU performance with 32KB of Flash program memory (organized 11K x 24) and housed in a 44-pin TQFP (10x10 mm) package. The 'T-E/PT' suffix indicates tape-and-reel packaging, the -40C to +125C extended automotive temperature grade, and the TQFP-44 (PT) package. A 16-bit microcontroller is a single-chip computer that processes data and instructions 16 bits at a time, offering higher arithmetic precision and richer peripheral integration than 8-bit MCUs while typically consuming less power than 32-bit Cortex-M devices. Within the PIC microcontroller hierarchy, the PIC24F sub-family is positioned as a low-power 16-bit line, and the PIC24FJ32MC104 specifically targets cost-sensitive motor-control applications with integrated Motor Control PWMs (MCPWM), CTMU, and Peripheral Pin Select (PPS). Key features include 32KB Flash, 1KB RAM, a 14-channel 10-bit ADC, dedicated motor-control PWM outputs, and PPS for flexible signal routing. The CTMU (Charge Time Measurement Unit) supports touch sensing and precise time-of-flight measurements. AEC-Q100 qualification makes this device suitable for harsh automotive environments. The architecture is a 16-bit modified Harvard CPU with a 24-bit instruction word, allowing most instructions to execute in one cycle. PPS allows digital peripheral pin assignments to be remapped at runtime, reducing board layout constraints and BOM cost. The integrated MCPWM is purpose-built for three-phase brushless DC (BLDC) and AC induction motor control. Typical applications include automotive sensor nodes, BLDC motor controllers for fans and pumps, small appliance motor drives, HVAC damper actuators, and low-cost industrial stepper controllers. Designers select this part when they need 16-bit performance with motor-control peripherals at a low pin count. A key design consideration is the 3.0V to 3.6V VDD supply range - this is not a 5V-tolerant part. Use an external LDO such as MCP1700 when sourcing from a higher-voltage rail. Decoupling must include a 0.1uF ceramic close to each VDD pin and a bulk 10uF tantalum or ceramic on the board. This page synthesizes Microchip product-page specs, distributor pricing tiers, drop-in same-family alternatives, and practical design notes not found on a single distributor listing.

询价 联系我们
PIC24FJ32MC104T-E/TL - 16-bit 32KB Flash Motor Control MCU | Microchip
PIC24FJ32MC104T-E/TL

PIC24FJ32MC104T-E/TL - 16-bit 32KB Flash Motor Control MCU | Microchip

The Microchip Technology PIC24FJ32MC104T-E/TL is a 16-bit microcontroller from the PIC24F family, integrating 32 KB of Flash program memory (11K x 24 words), up to 2 KB of SRAM, and dedicated motor-control peripherals in a 44-pin VTLA (6x6 mm) surface-mount package with exposed thermal pad. It is qualified to the AEC-Q100 automotive standard and operates at up to 16 MIPS from a 3.3 V supply, making it well-suited for cost-sensitive BLDC, PMSM, and stepper motor designs. A 16-bit MCU is a microcontroller whose data path, ALU, and most registers are 16 bits wide; this delivers roughly an order-of-magnitude more compute throughput than legacy 8-bit PIC MCUs while preserving the deterministic interrupt model and the MPLAB X / XC16 toolchain that PIC developers are familiar with. Within the broader semiconductor taxonomy, the PIC24FJ32MC104 belongs to the PIC24F sub-family -> 16-bit MCU -> microcontroller -> embedded processor -> semiconductor hierarchy. Key features include up to 35 general-purpose I/O pins, a 6-channel Motor Control PWM (MCPWM) module with dedicated fault inputs, three on-chip analog comparators, a Charge Time Measurement Unit (CTMU) for capacitive touch and time-of-flight sensing, PPS (Peripheral Pin Select) for flexible I/O mapping, and standard safety/reset peripherals (POR, BOR, WDT). The integrated MCPWM with center-aligned PWM and dead-time control removes the need for an external gate-driver timer, shrinking the BOM for 3-phase inverter stages. Architecturally, the device uses a modified Harvard CPU with a 16-bit instruction word, single-cycle 16x16 hardware multiply, and a 17-bit x 17-bit divider, all of which accelerate the field-oriented control (FOC) math loops used in modern motor drives. Internal Flash supports self-programming, and the CTMU + 10-bit ADC combo enables sensorless BEMF zero-crossing for BLDC commutation. Typical applications include automotive auxiliary pumps and fans, HVAC blower control, low-voltage e-bike controllers, small drone ESCs, white-goods BLDC drives, and general-purpose 3-phase inverter stages. The wide operating temperature range (-40C to +125C, 'E' grade) and AEC-Q100 qualification make it a strong fit for under-the-hood automotive ECUs. When designing with this part, prioritize PCB thermal relief through the exposed pad, keep analog and PWM traces short and symmetrical, and use MPLAB X with the XC16 compiler for code development. Verify pin assignments using the PPS mapping table because most digital peripherals can be remapped to almost any I/O. This page synthesizes distributor pricing, drop-in same-package alternatives from the PIC24FJ32MC1xx family, and practical design notes that complement (not duplicate) the manufacturer datasheet.

询价 联系我们
PIC24FJ32MC104T-I/ML - 16-bit Motor Control MCU, 32KB Flash, 44-QFN | Microchip
PIC24FJ32MC104T-I/ML

PIC24FJ32MC104T-I/ML - 16-bit Motor Control MCU, 32KB Flash, 44-QFN | Microchip

The Microchip Technology PIC24FJ32MC104T-I/ML is a 16-bit microcontroller from the PIC24F motor-control family, delivering 16 MIPS performance with 32 KB Flash and 2 KB RAM in a 44-pin VQFN (8x8 mm) package. It integrates three 16-bit Motor Control PWMs (MCPWM), three on-chip analog comparators, a Charge Time Measurement Unit (CTMU), Real-Time Clock Calendar (RTCC), Peripheral Pin Select (PPS), and up to 35 general-purpose I/O pins, making it well-suited for low-pin-count field-oriented control (FOC) and BLDC/PMSM motor drives operating from a single 3.3 V rail. A 16-bit MCU (microcontroller unit) is a single-chip computer with a 16-bit data path, on-chip Flash program memory, RAM, and integrated peripherals such as timers, ADC, communication controllers, and PWMs. The PIC24F family sits within the broader PIC24/dsPIC33 hierarchy of Microchip 16-bit controllers, sharing the same instruction set but offering lower-cost peripherals than dsPIC33 parts. Within the motor-control sub-family, MCUs add hardware PWMs and analog comparators specifically tuned to three-phase inverter switching, eliminating the need for an external gate-driver sequencer. Key features include a 32 MHz maximum operating frequency, 16 MIPS sustained throughput, 10/12-bit ADC (depending on configuration), 16-bit MCPWM channels with complementary outputs and programmable dead time, and 1.8-3.6 V wide operating voltage. The CTMU enables touch and time-of-flight sensing, while PPS allows nearly every peripheral to be remapped to multiple I/O pins—dramatically simplifying PCB routing on a 44-pin footprint. The VQFN-44 package with exposed pad provides a thermal resistance around 24 C/W on a 4-layer JEDEC JESD51 test board, enabling sustained switching of three-phase inverters at moderate currents. The "T" suffix indicates Tape & Reel packaging and the "I" indicates the industrial -40 C to +85 C temperature grade. Architecturally, the PIC24FJ32MC104 uses a modified Harvard RISC core with a 24-bit instruction word and 16-bit data path, plus an 8-deep hardware stack and a 17 x 17-bit single-cycle multiplier. The MCPWM block supports edge-aligned and center-aligned modes, independent time bases, and PWM fault inputs—key requirements for safe motor commutation. The PPS remapping fabric connects over 60 internal peripheral signals to the 35 I/O pads without contention, a feature Microchip extended across the PIC24F family to ease mixed-signal routing. Typical applications include BLDC/PMSM sensorless and sensored motor drives, drone ESCs, RC servo controllers, small appliance fan pumps (HVAC), power tools, and ceiling fans. The wide operating voltage and integrated RTCC also suit battery-powered metering and IoT sensor-actuator nodes that need a periodic wake-up duty cycle. When designing with this part, place a 1 uF decoupling capacitor close to every VDD/VCAP pin pair, keep the exposed pad soldered to a continuous ground pour for thermal dissipation, and use the PPS register assignments early in firmware planning to avoid late-stage I/O conflicts. The internal voltage regulator requires a low-ESR 10 uF cap on the VCAP pin—omitting it prevents startup. Compared to a dsPIC33 part, the PIC24FJ32MC104 trades the DSP engine for lower cost, so pick the dsPIC33 family only if you actually need sin/cos math acceleration.

询价 联系我们
PIC24FJ32MC104T-I/TL - 16-bit 32KB Flash Motor MCU | Microchip
PIC24FJ32MC104T-I/TL

PIC24FJ32MC104T-I/TL - 16-bit 32KB Flash Motor MCU | Microchip

The Microchip PIC24FJ32MC104T-I/TL is a 16-bit motor-control microcontroller from the PIC24FJ MC family, offering 32 KB of Flash program memory, 2 KB of SRAM, and 16 MIPS performance in a 44-pin VTLA surface-mount package (Tape & Reel, -I industrial temperature grade). It integrates dedicated motor-control peripherals including three Motor Control PWM (MCPWM) modules, three analog comparators, a Charge Time Measurement Unit (CTMU), and a Real-Time Clock and Calendar (RTCC), enabling compact sensorless or sensored BLDC/PMSM drive designs. What is a 16-bit motor-control MCU? It is a microcontroller class positioned between general-purpose 8-bit/16-bit MCUs and high-performance DSP MCUs (dsPIC33). It combines a 16-bit modified Harvard CPU, deterministic interrupt latency, and specialized motor-control PWM with complementary outputs and programmable dead-time, optimized for low-cost, low-pin-count variable-frequency drives. The PIC24FJ MC family belongs to the broader PIC microcontroller family and PIC24F sub-family, occupying the power-management and motor-control segment of Microchip's 16-bit portfolio. Key features of the PIC24FJ32MC104T-I/TL include 32 KB Flash, 2 KB SRAM, up to 16 MIPS at 32 MHz, three MCPWM channels with complementary outputs and dead-time control, three on-chip analog comparators, a 10-bit ADC up to 1.1 Msps with up to 14 channels, CTMU for capacitive touch and current measurement, RTCC, two I2C, two SPI, two UART, and Peripheral Pin Select (PPS) for flexible signal routing on the limited 44-pin pinout. The device uses a 16-bit modified Harvard CPU with hardware Multiply/Divide and DSP-friendly instructions, supported by a flexible 32 MHz internal oscillator and PLL. Low-power features include Idle and Sleep modes with multiple wake-up sources, plus the nanoWatt XLP extreme-low-power technology, making it suitable for battery-backed motor-control applications such as cordless tools or smart fans. Typical applications include BLDC/PMSM sensorless fan and pump controllers, low-voltage battery-operated drives for portable appliances, three-phase small-motor inverter control, electronic speed controllers (ESCs) for RC and hobby drives, LED lighting drivers with dimming, and white-goods motor-control subsystems (washing machines, dishwasher pumps). When designing with this device, allocate PCB area for the exposed thermal pad and four-layer stack-up to dissipate heat at high PWM switching frequencies. The PPS feature lets you reassign digital peripherals to nearly any I/O pin, which simplifies PCB routing on this 44-pin TQFP-style VTLA package, but verify pin assignments in the datasheet pinout table before final layout. This page synthesizes distributor pricing, same-brand drop-in alternatives from the PIC24FJ MC family, and practical design notes not consolidated in the manufacturer datasheet, helping engineers shorten the selection cycle for 16-bit motor-control designs.

询价 联系我们
PIC24FJ48GA002-E/SO - 16-bit 32MHz MCU, 48KB Flash, 28-SOIC
PIC24FJ48GA002-E/SO

PIC24FJ48GA002-E/SO - 16-bit 32MHz MCU, 48KB Flash, 28-SOIC

The Microchip Technology PIC24FJ48GA002-E/SO is a 16-bit PIC24F microcontroller delivering up to 32 MHz (16 MIPS) CPU performance with 48 KB of Flash program memory and 8 KB of RAM, housed in a 28-pin SOIC wide-body (7.50 mm) package. According to the Microchip product page, the PIC24FJ48GA002 family belongs to the PIC24FJ64GA004 silicon platform, supporting 21 general-purpose I/O pins, two UART, two SPI, and two I2C peripherals, plus a 10-bit A/D converter and up to five 16-bit timers. Background: a PIC microcontroller (MCU = MicroController Unit) is a compact, self-contained computer-on-a-chip integrating a CPU, non-volatile Flash program memory, volatile RAM, and configurable peripherals on a single silicon die. The PIC24F family extends the 8-bit PIC architecture into 16-bit territory with a modified Harvard bus, single-cycle instruction execution, hardware multiply/divide, and a C-optimized instruction set that competes head-to-head with ARM Cortex-M0 in cost-sensitive embedded designs. Key features include 17x17-bit hardware multiply, 32-bit/16-bit hardware divide, an internal 8 MHz oscillator (±2% accuracy), 4.5 V-tolerant digital I/O, a real-time clock and calendar (RTCC) module, and nanoWatt Technology for sleep currents down to 20 nA typical. The device operates from 2.0 V to 3.6 V across an industrial -40°C to +125°C range. Integrated peripherals include a 10-bit ADC with up to 16 input channels, five 16-bit timers, two comparators, and a charge time measurement unit (CTMU) for capacitive touch sensing. Typical applications include consumer electronics (appliance controls, toys, remote controls), industrial sensor nodes, low-cost graphical displays (via PMP or SPI+GLCD), USB bridge devices (with an external transceiver), portable data loggers, and educational platforms such as the Microchip Explorer 16/32 development board. The wide -40°C to +125°C temperature window and the -E (industrial) operating range make the part well suited to factory-floor instrumentation. Designers should note that PIC24FJ48GA002-E/SO uses the standard 28-SOIC wide footprint shared with many PIC24FJXXGA0XX variants; firmware is developed in MPLAB X IDE with the XC16 compiler, programmed via ICSP (In-Circuit Serial Programming) on the PGECx/PGEDx pair. The Explorer 16 PIM socket allows designers to swap silicon revisions without PCB rework. This page synthesizes distributor pricing as of 2026-09-30, drop-in same-package alternatives drawn from the PIC24FJ GA family, and practical engineering design guidance that goes beyond the manufacturer datasheet table of contents.

询价 联系我们
PIC24FJ48GA002-I/ML - 48KB Flash 16-bit MCU 28-QFN | Microchip
PIC24FJ48GA002-I/ML

PIC24FJ48GA002-I/ML - 48KB Flash 16-bit MCU 28-QFN | Microchip

The Microchip Technology PIC24FJ48GA002-I/ML is a 16-bit PIC® 24F microcontroller delivering 16 MIPS performance from a 48 KB (16K x 24) Flash program memory and 8 KB RAM, housed in a 28-pin QFN (6x6 mm) package with exposed pad. Operating from 2.0V to 3.6V with a 32 MHz internal oscillator and a 16 MHz instruction cycle, it provides 21 general-purpose I/O pins, 5 x 17 hardware multiplier, 32-bit x 16-bit hardware divider, and a C-compiler-optimized instruction set. A microcontroller (MCU) is a single-chip computer that integrates a CPU, memory, and programmable peripherals. The PIC24FJ family sits in the 16-bit tier between 8-bit PIC16/PIC18 MCUs and 32-bit PIC32 devices, offering higher code density and DSP-class arithmetic versus 8-bit parts while retaining deterministic real-time interrupt behaviour. Within the broader taxonomy it belongs to: microcontroller -> embedded processor -> integrated circuit -> semiconductor. The '24F' suffix denotes Flash program memory and the nanoWatt Technology low-power family. Key features include nanoWatt XLP technology for sub-uA sleep current, 10-bit ADC with up to 9 channels, multiple PWM/SCCP/MCCP modules for motor and power control, Real-Time Clock and Calendar (RTCC), and an internal low-power RC oscillator that can free the design from an external crystal. The 28-QFN package with thermal pad provides low-thermal-resistance assembly for space-constrained boards while exposing all PIC24FJ64GA004-family peripherals. Architecturally, the PIC24FJ48GA002 implements a 16-bit modified Harvard core with a 24-bit instruction word and an 8-stage hardware stack. Single-cycle execution plus the 17 x 17 hardware multiplier enables efficient DSP-class math without external coprocessors, while the 32/16-bit hardware divider accelerates integer division in C code. Integrated peripherals include comparators, UART/SPI/I2C, parallel master port, and charge time measurement unit (CTMU) for capacitive touch sensing. Typical applications include portable medical devices, HVAC control panels, sensor signal conditioning, low-cost motor control (BLDC, stepper, fan), USB/embedded host interfaces, and industrial sensor hubs that benefit from the PIC24F low-power XLP features. The 48 KB Flash supports mid-sized stacks such as USB device class drivers or graphics libraries on small OLEDs. When designing with the PIC24FJ48GA002-I/ML, expose the QFN thermal pad to a contiguous ground copper pour with multiple vias to meet the 31 C/W typical theta_JA; without proper pad soldering thermal dissipation suffers. Select the Industrial (-40C to +85C) variant (suffix 'I') for general-purpose systems; extended (-40C to +125C, 'E') is available for automotive or industrial harsh environments. Configure the internal FRC oscillator before disabling the secondary oscillator block to avoid clock-loss lockups. This page synthesizes distributor pricing, drop-in alternatives, and engineering design notes not found in the manufacturer datasheet alone - including a curated comparison table of same-package PIC24FJ variants and pin-compatible drop-in replacements useful for cost-down redesigns.

询价 联系我们
PIC24FJ48GA002-I/SO - 16-bit 48KB Flash MCU | Microchip
PIC24FJ48GA002-I/SO

PIC24FJ48GA002-I/SO - 16-bit 48KB Flash MCU | Microchip

The Microchip Technology PIC24FJ48GA002-I/SO is a 16-bit PIC24F flash microcontroller with 48 KB program Flash, 8 KB RAM, and 21 general-purpose I/O, housed in a 28-pin SOIC wide (SOIC-28) package. It executes instructions at up to 16 MIPS from a 32 MHz internal oscillator and integrates a 10-bit A/D converter with up to 10 channels, two UART modules, two SPI interfaces, and an I2C port. According to the verified Microchip datasheet, the device operates from 2.0 V to 3.6 V, suiting battery-backed and 3.3 V designs. Background: a PIC24F is a 16-bit RISC microcontroller in the Microchip PIC family that uses a modified Harvard architecture with separate program and data paths and a 16-bit-wide datapath. PIC24F devices target low-power general-purpose embedded control, sitting below dsPIC33 (DSP-extended) parts and above 8-bit PIC16/PIC18 in compute, RAM, and peripheral capability. They are commonly selected for cost-sensitive 3.3 V systems needing higher performance than 8-bit MCUs but not the complexity of 32-bit ARM Cortex-M parts. Key features include hardware single-cycle 17x17 multiplication, a 32-bit/16-bit hardware divider, C-compiler-optimized instruction set, a real-time clock calendar (RTCC), five 16-bit timers, and an internal 8 MHz oscillator with PLL. The integrated nanoWatt technology manages idle, sleep, and deep-sleep modes for power-sensitive applications. JTAG and ICSP in-circuit debugging are supported across the family. Technical depth: the PIC24FJ48GA002 shares its peripheral set and pinout with other PIC24FJXXXGA0XX family members (28-pin and 44-pin variants). The 'GA0' designator indicates the peripheral line; 'I' denotes the industrial temperature grade (-40C to +85C) and '/SO' is the 28-pin SOIC wide package. The architecture separates Flash program memory from RAM via dual-bus Harvard paths, allowing simultaneous instruction fetch and data access. Typical applications include industrial control panels, sensor signal conditioning, low-power IoT edge nodes, USB/serial bridging, and human-machine interface (HMI) subsystems. The Explorer 16/32 development board supports this part via a Processor Plug-In Module (PIM). Design consideration: the 28-pin SOIC wide footprint offers easy hand-soldering during prototyping and accommodates all 21 I/O lines. Note that the upper Flash address region is reserved for bootloader use; refer to the device family datasheet section 5 for memory mapping details. This page synthesizes verified distributor pricing, drop-in same-package alternatives, and practical design notes beyond what the manufacturer datasheet alone provides.

询价 联系我们