微控制器

产品（18688)

PIC32MX440F128LT-80I/BG - 80MHz 32-bit MCU 128KB Flash USB-OTG | Microchip
PIC32MX440F128LT-80I/BG

PIC32MX440F128LT-80I/BG - 80MHz 32-bit MCU 128KB Flash USB-OTG | Microchip

The Microchip Technology PIC32MX440F128LT-80I/BG is a 32-bit MIPS32 M4K microcontroller running at 80 MHz with 128 KB of Flash program memory and 32 KB of SRAM, housed in a 121-ball TFBGA package (10x10 mm). It integrates a full-speed USB-OTG controller, a 10-bit 1 Msps ADC, and a rich set of communication peripherals in a single chip. An MCU (microcontroller) is a single-chip computer that integrates a CPU core, RAM, non-volatile program memory, and peripherals such as ADC, timers, and communication interfaces. In the embedded hierarchy, the PIC32MX sits at the 32-bit mid-range tier, between 8/16-bit MCUs (PIC16, PIC24) and higher-performance Cortex-M parts. It uses the MIPS32 M4K core - a Harvard-architecture 32-bit RISC processor with single-cycle multiply - and is positioned by Microchip as a bridge from 8/16-bit PIC designs to full 32-bit performance without giving up peripheral compatibility. The device features 128 KB Flash (128K x 8) with self-programmability, 32 KB SRAM, an 80 MHz core with 50 MHz peripheral bus, an on-chip 10-bit 1 Msps ADC with up to 16 channels, two I2C, two SPI, two UART modules, five 16-bit timers/counters, an RTCC, and a USB-2.0 full-speed OTG transceiver with integrated PHY. The I/O count is 85, with 5V-tolerant digital pins. Power input range is 2.3V to 3.6V across industrial temperature (-40C to +85C). The MIPS32 M4K core delivers 1.56 DMIPS/MHz, allowing the 80 MHz part to execute up to 125 DMIPS. The wide peripheral set (USB, CAN optional on family, PMP for graphics/parallel bus) and generous SRAM simplify USB-device, USB-host, and embedded-graphics designs. The integrated USB-OTG transceiver removes the need for an external PHY, saving BOM cost and PCB area in low-cost USB applications. Typical applications include USB peripherals (Human Interface Devices, mass storage, virtual COM ports), embedded control with USB host for barcode scanners or keyboards, industrial sensors with USB diagnostics, low-cost graphics via PMP, and home automation bridges. The PIC32MX4 family is broadly deployed in educational, hobbyist, and low-volume industrial products thanks to MPLAB X IDE and Harmony framework support. When designing with this device, ensure USB impedance-controlled traces (90 ohms differential) and a 12 MHz or 48 MHz crystal reference as required by the USB PLL. The 2.3V to 3.6V supply rules out direct 5V system rails without an LDO. The TFBGA-121 package (10x10 mm, 0.8 mm ball pitch) requires multi-layer PCB and BGA assembly capability - choose the LQFP package variant for hand-solder or low-layer prototypes. This page synthesizes distributor pricing, same-brand drop-in alternatives from the PIC32MX3/4 family, and practical design notes beyond what is in the manufacturer datasheet alone.

USD $4.78 有现货
PIC32MX440F128LT-80V/PT - 80MHz 32-bit MCU 128KB Flash USB-OTG | Microchip
PIC32MX440F128LT-80V/PT

PIC32MX440F128LT-80V/PT - 80MHz 32-bit MCU 128KB Flash USB-OTG | Microchip

The Microchip Technology PIC32MX440F128LT-80V/PT is a 32-bit MIPS32 M4K microcontroller delivering up to 80 MHz of core performance, integrated with 128 KB of Flash program memory and 32 KB of SRAM, in a 100-pin TQFP (PT) package. The 'L' suffix denotes the 100-pin variant and the 'V' suffix indicates the automotive-grade -40C to +105C operating temperature range, while the 'T' suffix marks tape-and-reel packaging. This part is targeted at USB-OTG-capable embedded designs that demand deterministic real-time performance and ample code space. A 32-bit MCU (microcontroller unit) is a single-chip computer that integrates a CPU core, memory (Flash/RAM), and a rich set of peripherals such as timers, ADC, communication interfaces, and I/O. The PIC32MX family uses the MIPS32 M4K architecture, a Harvard-style RISC core known for deterministic instruction timing and excellent code density in C. Within Microchip's product hierarchy, the PIC32MX4xx series sits between the smaller PIC32MX1/2/3 entry-level MCUs and the higher-end PIC32MX5/6/7 USB-OTG devices, offering a balance of peripherals, memory, and cost. Key features include a 10-bit ADC with up to 16 channels, multiple UART/SPI/I2C interfaces, a USB-OTG peripheral, five 16-bit timers/counters, and a parallel master port. The device supports up to 85 general-purpose I/O pins, runs from 2.3V to 3.6V VDD, and includes JTAG and 2-wire ICSP debug interfaces. The instruction cache and prefetch module accelerate Flash execution, while the integrated DMA controller offloads data movement from the CPU. The M4K core uses a 5-stage pipeline with hardware multiply/divide, and the bus matrix provides independent paths for instruction and data fetches. This Harvard architecture allows simultaneous fetch and memory access without contention, which improves throughput versus von Neumann designs at the same clock rate. Hardware-level features such as configurable interrupt priorities and a shadow register set enable fast context switches for real-time control loops. Typical applications include USB peripherals and embedded hosts, industrial control and HMI, automotive body and infotainment modules, point-of-sale terminals, and consumer devices requiring graphical user interfaces. The wide temperature range also makes the -V variant suitable for under-hood automotive subsystems and outdoor industrial equipment. When designing with this device, ensure the 3.3V power rail is well-regulated and bulk-decoupled, and place a 12 MHz crystal with the recommended load capacitors within 10 mm of the OSC1/OSC2 pins. Use the MPLAB XC32 compiler with -O2 optimization to fully leverage the 5-stage pipeline. The automotive-grade temperature window (-40C to +105C) requires derating of Flash endurance if frequent reprogramming is expected. This page synthesizes distributor pricing, drop-in alternatives from the same PIC32MX4 family, and practical design notes not found in the manufacturer datasheet.

USD $5.10 有现货
PIC32MX440F256H-80I/MR - 80MHz 32-bit MCU 256KB Flash USB-OTG | Microchip
PIC32MX440F256H-80I/MR

PIC32MX440F256H-80I/MR - 80MHz 32-bit MCU 256KB Flash USB-OTG | Microchip

The Microchip Technology PIC32MX440F256H-80I/MR is an 80 MHz, 32-bit MIPS M4K general-purpose microcontroller with 256 KB Flash and 32 KB SRAM, integrated USB 2.0 On-The-Go (OTG) with on-chip PHY, and 53 general-purpose I/O pins, packaged in a 64-pin QFN (MR, 9x9 mm) form factor. A 32-bit microcontroller (MCU) is an integrated computing system that combines a high-performance processor core with on-chip memory and a rich set of peripherals such as timers, ADCs, communication controllers, and GPIOs. The PIC32MX family is built on the MIPS32 M4K Harvard architecture with a 5-stage pipeline, hardware multiply/divide, and MIPS16e compressed instruction mode, allowing up to 40% smaller code size. The MX4xx sub-family specifically adds an integrated USB 2.0 OTG peripheral with dedicated DMA channels and PHY, distinguishing it from the MX3xx line. Key features include 256 KB single-cycle Flash program memory, 32 KB SRAM data memory, a 10-bit 1 Msps Analog-to-Digital Converter with up to 16 channels, two I2C, two UART, and two SPI/I2S peripherals, five 16-bit timers/counters, an RTCC, and a parallel master port. The device operates from 2.3V to 3.6V across an industrial -40C to +85C temperature range. The 80 MHz CPU delivers up to 105 DMIPS throughput, with single-cycle multiply/divide enabling efficient DSP-class arithmetic. The integrated USB OTG controller with on-chip PHY and dedicated DMA channel eliminates external PHY components, reducing BOM cost and PCB area in USB device, host, or dual-role applications. The Harvard architecture with separate instruction and data buses, combined with a 5-stage pipeline, allows instruction fetch and data load/store to occur in the same clock cycle, delivering sustained performance close to the rated 1.65 DMIPS/MHz/MHz on compute-intensive DSP routines. Typical applications include USB peripherals such as HID/Bulk/CDC devices and USB host controllers, industrial control and Human-Machine Interface (HMI) panels, sensor hubs and data loggers, building automation controllers, and portable consumer electronics. The combination of large Flash, USB OTG, and high-performance 32-bit core is particularly suited for USB-connected embedded products that need significant local compute capability. When designing with this part, allocate at least one 10 uF bulk plus 0.1 uF decoupling capacitor per VDD pin pair, route the USB D+/D- lines as a 90 ohm differential pair with length matching, and follow the recommended crystal/PLL layout from the Microchip PIC32MX3XX/4XX Family Data Sheet to avoid EMI and jitter issues. This page synthesizes distributor pricing, verified drop-in alternatives drawn from the PIC32MX4XX family, and practical design notes not found on the manufacturer product page, giving procurement and engineering teams an actionable view in one place.

USD $5.35 有现货
PIC32MX440F256H-80V/MR - 80MHz 256KB Flash USB 32-bit MCU | Microchip
PIC32MX440F256H-80V/MR

PIC32MX440F256H-80V/MR - 80MHz 256KB Flash USB 32-bit MCU | Microchip

The Microchip Technology PIC32MX440F256H-80V/MR is a 32-bit MIPS32 M4K microcontroller with 256KB Flash, 32KB RAM, integrated USB-OTG, and a 10-bit ADC, operating at up to 80MHz in a 64-pin VQFN (9x9 mm) package with exposed pad. It is part of the PIC32MX4xx general-purpose USB family. A microcontroller (MCU) is a single-chip computer that integrates a CPU core, program memory (Flash), working memory (RAM), and peripheral interfaces (ADC, timers, communication busses). The PIC32MX4xx family targets cost-sensitive embedded designs that need 32-bit performance plus USB host/device/OTG connectivity without the cost of a higher-tier PIC32MZ part. Within the broader taxonomy, this part is a microcontroller -> embedded MCU -> 32-bit MCU -> MIPS-based MCU -> PIC32 family member. Key features include 256KB (256K x 8) Flash program memory, 32KB SRAM, 53 digital I/O pins, 16 channels of 10-bit ADC at up to 1 Msps, four 16-bit timers, two UART, two SPI, two I2C, and a USB 2.0 full-speed/low-speed OTG controller with on-chip transceiver. The 80MHz core delivers 1.56 DMIPS/MHz, ample headroom for control loops, USB stacks, and modest signal processing. Architecturally, the device combines the MIPS32 M4K Harvard bus core with separate Flash and RAM buses, allowing zero-wait-state execution from a 128-bit Flash prefetch cache. The integrated USB OTG PHY eliminates external transceivers for full-speed USB, reducing BOM cost and PCB area in HID, CDC, and mass-storage applications. Typical applications include USB peripherals (CDC serial bridges, HID devices, mass storage), industrial control and HMI panels, consumer appliances with USB diagnostics ports, sensor aggregation hubs, and low-cost graphical user interfaces. The wide 2.3V-3.6V Vdd range and -40C to +105C operating temperature (V-grade) also suit industrial and automotive under-hood sub-systems. When designing, allocate the exposed pad (EP) to a continuous ground plane with multiple thermal vias to keep junction temperature within the 105C industrial limit at full CPU load. Use MPLAB X IDE, MPLAB Harmony v3, or the legacy MPLAB C32 toolchain; the device is supported by PICkit 5, ICD 4, and ICD 3 debuggers. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet alone, giving the engineer a faster decision path than a raw datasheet search.

USD $5.74 有现货
PIC32MX440F256HT-80I/MR - 32-bit 80MHz MCU 256KB Flash | Microchip
PIC32MX440F256HT-80I/MR

PIC32MX440F256HT-80I/MR - 32-bit 80MHz MCU 256KB Flash | Microchip

The Microchip PIC32MX440F256HT-80I/MR is a 32-bit MIPS M4K microcontroller running at 80 MHz with 256 KB of Flash program memory and 32 KB of SRAM, housed in a 64-pin VQFN (9x9 mm) package with industrial temperature grade (-40C to +85C). It integrates USB-OTG, a 10-bit 1 Msps ADC, DMA, and a rich set of peripherals including I2C, SPI, UART, PMP, and RTCC. A microcontroller (MCU) is a single-chip computer containing a processor core, program and data memory, I/O peripherals, and often specialized interfaces. PIC32MX parts sit in the hierarchy of microcontrollers -> 32-bit MCUs -> MIPS-based MCUs -> embedded controllers, bridging 8/16-bit PIC and high-performance Cortex-M applications. They are widely used where deterministic real-time performance, USB connectivity, and Microchip's MPLAB X toolchain support are required. Key features of this part include 256 KB Flash (256K x 8), 32 KB SRAM, a 10-bit 16-channel 1 Msps ADC, two I2C, two SPI, two UART, USB-OTG full-speed controller, an 8-bit Parallel Master Port (PMP), five 16-bit timers/counters, DMA controller with 8 channels, and an RTCC module. The 80 MHz core provides 80 MIPS of processing throughput, sufficient for USB stacks, graphics drivers, and protocol conversion. The PIC32MX4XX family uses a 5-stage pipeline MIPS32 M4K core with hardware multiply/divide and DSP extensions. The dual-bus architecture (instruction fetch and data on separate buses) increases throughput for pointer-heavy code. The peripheral pin-select feature remappable I/O functions to multiple pins, simplifying PCB layout when a constraint conflicts with a default pin assignment. Typical applications include USB peripherals (HID, CDC, vendor class), industrial control panels with graphic LCDs, sensor hubs bridging SPI/UART modbus, audio controllers with PWM output, motor control with quadrature encoders, and general-purpose embedded platforms where 256 KB code space and USB host/device are required. When designing, ensure the USB pins route as a 90-ohm differential pair and that the 64-pin VQFN ground pad is soldered to a continuous ground plane for thermal dissipation. Pull-up resistors on I2C/SDA lines must be sized for the bus capacitance to meet USB-OTG signal-integrity margins. This page synthesizes distributor pricing, drop-in PIC32MX alternatives, and practical design notes not found in the manufacturer datasheet.

USD $4.61 有现货
PIC32MX440F256HT-80I/PT - 80MHz 32-bit MCU 256KB Flash | Microchip
PIC32MX440F256HT-80I/PT

PIC32MX440F256HT-80I/PT - 80MHz 32-bit MCU 256KB Flash | Microchip

The Microchip PIC32MX440F256HT-80I/PT is a 32-bit MIPS32 M4K microcontroller operating at up to 80 MHz, with 256 KB of Flash and 32 KB of SRAM, housed in a 64-pin TQFP (PT) package measuring 10x10 mm. It is part of the PIC32MX4xx family, which targets applications needing USB 2.0 Full-Speed OTG, a rich peripheral set, and ample code space for graphical or communication stacks. A microcontroller (MCU) is a single-chip computer that integrates a CPU core, program memory (Flash), data memory (SRAM), and a mix of peripherals such as timers, ADC, communication interfaces, and I/O pins. Within the broader semiconductor taxonomy, an MCU belongs to microcontrollers -> integrated circuits -> semiconductors. The PIC32MX family uses the MIPS32 M4K core, a Harvard-architecture RISC processor capable of 1.56 DMIPS/MHz, positioning it above 8-bit/16-bit MCUs in raw computational throughput for embedded workloads. Key features of this part include 256 KB (256K x 8) Flash, 32 KB SRAM, a Full-Speed USB 2.0 OTG controller, up to 53 general-purpose I/O pins, 16-channel 10-bit ADC with 1 Msps conversion, five 16-bit timers/counters, I2S/SPT for audio, I2C, SPI, and UART peripherals. Supply voltage spans 2.5V to 3.6V, with an industrial operating range of -40C to +85C. An integrated 8 MHz internal oscillator with PLL supports the 80 MHz system clock. Architecturally, the device pairs the M4K core with a dedicated DMA controller and peripheral bus, which can offload data movement for USB, ADC, and SPI transactions. Code protection, a 5V-tolerant digital I/O subset (mapped to specific pins), and JTAG/ICSP debug interfaces are built in. Compared to PIC24/dsPIC parts, this PIC32 offers a 32-bit datapath and deterministic interrupt latency, simplifying porting of RTOS kernels such as FreeRTOS. Typical applications for the PIC32MX440F256HT-80I/PT include USB peripherals (HID, CDC, mass storage), industrial control and HMI panels, audio processing with I2S codecs, sensor hubs, and low-cost graphical user interfaces driving small TFT displays. The 256 KB Flash accommodates moderate-sized protocol stacks (USB, TCP/IP via MLA) plus application code without requiring external memory. When designing with this device, plan I/O assignments carefully: not all pins are 5V-tolerant, and USB D+/D- must be routed as a 90-ohm differential pair. A 12 MHz crystal is recommended for USB Full-Speed compliance, while the internal 8 MHz oscillator suffices for non-USB designs. Decoupling should follow Microchip's recommended 0.1 uF + 1 uF per VDD/AVDD pair. This page synthesizes distributor pricing, same-family drop-in alternatives, and design notes not aggregated on any single distributor listing.

USD $6.20 有现货
PIC32MX440F256HT-80V/MR - 32-bit MCU 256KB Flash USB-OTG | Microchip
PIC32MX440F256HT-80V/MR

PIC32MX440F256HT-80V/MR - 32-bit MCU 256KB Flash USB-OTG | Microchip

The Microchip PIC32MX440F256HT-80V/MR is a 32-bit MIPS M4K PIC microcontroller running at 80 MHz with 256 KB of Flash program memory and 32 KB of SRAM, packaged in a 64-pin VQFN (9x9 mm). It integrates a USB 2.0 Full-Speed On-The-Go controller, a 10-bit ADC, multiple UART/SPI/I2C peripherals, and a DMA engine, making it a versatile general-purpose MCU. The 80 MHz core delivers 1.56 DMIPS/MHz performance suitable for embedded control and connectivity. A 32-bit microcontroller is an integrated circuit combining a 32-bit CPU core, program memory (Flash), data memory (RAM), and configurable peripheral set on a single die. Within the PIC32MX family, this part belongs to the USB-equipped MX4xx sub-family, which adds a dedicated USB 2.0 OTG controller and 10-bit ADC compared to the lower-end MX1xx/MX2xx lines. Within the broader taxonomy, it sits as MCU -> embedded controller -> 32-bit microcontroller -> semiconductor, serving as the central processor for real-time embedded systems. Key differentiating features include hardware DMA, RTCC with calendar mode, PMP (parallel Master Port) for graphics/FPGA bridging, and the CIP (Core Independent Peripherals) such as a 16-bit Parallel Master Port and configurable logic cells. The 64-VQFN package exposes up to 53 GPIO pins, supporting mixed 5V/3.3V tolerant I/O for designs that must interface to legacy 5V peripherals. The part uses the MIPS32 M4K microAptiv core, with single-cycle hardware multiply/divide, debug via 2-wire MIPS JTAG or 4-wire standard JTAG, and trace support through the optional Trace Port. The 80 MHz frequency and dual-bus Flash prefetch provide deterministic throughput for protocol stacks such as USB, TCP/IP via soft-MAC, or Modbus. Typical applications include USB HID devices, industrial sensor hubs, motor control FOC loops, USB barcode scanners, and embedded web servers. The wide peripheral set and DMA engine reduce CPU load for high-throughput I/O. For designers, the -80V temperature grade targets industrial 2.5V-3.6V designs; pair with the MPLAB Harmony framework for rapid firmware development. This page synthesizes distributor pricing, drop-in alternatives, and design notes not found in the manufacturer datasheet alone.

USD $2.40 有现货
PIC32MX440F256HT-80V/PT - 32-bit 80MHz 256KB Flash MCU | Microchip
PIC32MX440F256HT-80V/PT

PIC32MX440F256HT-80V/PT - 32-bit 80MHz 256KB Flash MCU | Microchip

The Microchip Technology PIC32MX440F256HT-80V/PT is a 32-bit MIPS32 M4K microcontroller running at 80 MHz with 256 KB Flash and 32 KB SRAM in a 64-pin TQFP (10x10 mm) package. It integrates USB-OTG, a 10-bit on-chip A/D converter, and CIP (Core Independent Peripherals) that offload timing-critical functions from the CPU. This V-tape-and-reel industrial-grade variant (operating range -40C to +105C) targets USB-connected embedded designs. A PIC32 microcontroller is a 32-bit MCU based on the MIPS32 M4K core architecture, positioned above 8/16-bit families in performance and below ARM Cortex-M series in cost. The PIC32MX family integrates rich peripherals such as USB, CAN, and PMP in single-chip packages, enabling direct USB-host/device connectivity without external bridges. Key features of the PIC32MX440F256HT-80V/PT include 256 KB Flash with 32 KB RAM, 16-bit parallel master port (PMP) for external bus interfaces, up to 5 timers, 2 I2C, 2 SPI, and 2 UART channels. The integrated full-speed USB 2.0 OTG controller with on-chip transceiver eliminates external PHY chips. With 1.56 DMIPS/MHz performance and single-cycle multiply/divide, it executes DSP-like routines efficiently for general-purpose and control applications. The device runs from 2.3V to 3.6V with 5V-tolerant digital inputs and integrates a 10-bit 1 Msps ADC with up to 16 channels. The 80 MHz core, MIPS M4K pipeline, and 32 KB RAM allow mid-range RTOS execution or complex state-machine firmware without external SRAM. Typical applications include USB peripherals (barcode scanners, custom HID, data loggers), industrial control PLCs, low-end HMI panels with PMP-driven LCD, embedded motor control, and consumer audio devices. The USB-OTG feature particularly fits point-of-sale terminals, USB-to-UART converters, and device-mode test instrumentation. The wide operating temperature and robust peripheral set also suit industrial automation, building automation, and medical device peripherals. When designing with this MCU, allocate the 16 KB of boot Flash region reserved by Microchip's firmware update library. Place a 12 MHz crystal with appropriate load capacitors and provide adequate decoupling near VDD/VSS pins. Use the device's internal LDO if 5V-tolerant I/O is required. This page synthesizes distributor pricing, drop-in PIC32MX-family alternatives, and practical design notes not found on a single datasheet page, helping engineers and buyers make informed component decisions for USB-enabled 32-bit embedded designs.

USD $5.21 有现货
PIC32MX440F512H-80I/MR - 80MHz 32-bit MCU 512KB Flash USB-OTG | Microchip
PIC32MX440F512H-80I/MR

PIC32MX440F512H-80I/MR - 80MHz 32-bit MCU 512KB Flash USB-OTG | Microchip

The Microchip Technology PIC32MX440F512H-80I/MR is a 32-bit MIPS M4K microcontroller operating at 80 MHz (105 DMIPS), integrating 512 KB of Flash and 32 KB of SRAM, with a dedicated USB 2.0 On-The-Go peripheral (including integrated PHY), in a 64-pin VQFN (9x9 mm) package. The core combines a 5-stage pipeline, Harvard architecture, MIPS16e compressed-instruction mode, and single-cycle hardware multiply/divide, delivering up to 40% smaller code size for application firmware. The device operates from 2.3 V to 3.6 V and exposes 53 general-purpose I/O pins alongside dedicated peripherals such as a 10-bit 1 Msps ADC, DMA, I2C, SPI, UART, and PMP. A microcontroller (MCU) is a self-contained processor that integrates CPU, memory, and programmable I/O on a single die, sitting at the lowest level of embedded compute hierarchy (CPU -> MCU -> SoC -> MPU). The PIC32MX4xx family targets general-purpose and USB-connected applications where deterministic real-time control, low BOM cost, and ready USB integration outweigh the need for higher clock rates. It belongs to the broader PIC32 family of MIPS-based MCUs and slots into the larger microcontroller semiconductor category. Key differentiating features include the integrated USB-OTG transceiver (eliminating external PHY cost), 512 KB Flash/32 KB RAM memory density at this price point, hardware DMA supporting USB transfers, and the automotive/industrial -40C to +85C operating range signalled by the -80I temperature grade. The 64-VQFN exposed-pad package provides improved thermal dissipation versus TQFP-64 variants and is suited to compact USB dongle and embedded designs. Architecturally, the part uses a 32-bit MIPS32 M4K core with 5-stage pipeline and Harvard bus, allowing concurrent instruction fetch and data access. The USB-OTG module has a dedicated DMA channel that offloads packet handling from the CPU, freeing cycles for application logic. ICSP programming via PGECx/PGEDx pins enables in-circuit debug with the MPLAB REAL ICE or PICkit 5 toolchains. Typical applications are USB peripherals, embedded audio interfaces, industrial control with USB diagnostics, USB mass-storage devices, and CAN/USB gateway hubs. It suits designs where 512 KB Flash is sufficient for USB stacks plus application code, and where a small QFN footprint matters more than a TQFP pin pitch. When designing with this part, place a 0.1 uF decoupling capacitor adjacent to every VDD/VDDUSB pin and provide a 10 uF bulk capacitor on the main rail. The exposed pad must be soldered to the ground plane for thermal relief. Programming via ICSP requires short, parallel PGECx/PGEDx traces to avoid debug failures. This page synthesizes distributor pricing from DigiKey/Mouser, drop-in alternative MPNs from Microchip's own family, and practical design notes that go beyond what the manufacturer datasheet alone provides.

USD $5.45 有现货
PIC32MX440F512H-80I/PT - 32-bit MCU 80MHz 512KB Flash USB-OTG TQFP-64
PIC32MX440F512H-80I/PT

PIC32MX440F512H-80I/PT - 32-bit MCU 80MHz 512KB Flash USB-OTG TQFP-64

The Microchip PIC32MX440F512H-80I/PT is a 32-bit MIPS32 M4K microcontroller running at 80 MHz with 512 KB Flash and 32 KB SRAM in a 64-pin TQFP (10x10 mm) package. It integrates USB 2.0 On-The-Go with PHY, dedicated DMA, and a 10-bit ADC. A 32-bit MCU (microcontroller unit) is a single-chip computer that combines a 32-bit processor core, program memory (Flash), data memory (SRAM), and a rich set of peripherals (ADC, timers, communication interfaces). PIC32 microcontrollers are part of the MIPS32 family, positioning them above 8-bit PIC MCUs and below 32-bit Cortex-M ARM devices in the embedded hierarchy. They are well suited for USB, graphics, and connectivity applications requiring deterministic real-time behavior combined with high throughput. Key features of the PIC32MX440F512H-80I/PT include 80 MHz / 105 DMIPS CPU performance, 512 KB Flash program memory, 32 KB SRAM data memory, integrated USB-OTG with PHY, 5-stage pipeline Harvard architecture, MIPS16e code compression for up to 40% smaller code, hardware multiply/divide unit, 16-bit wide instructions, dedicated DMA controller, and a 10-bit ADC with up to 1 Msps sampling. The architecture combines a 5-stage pipeline, Harvard bus layout, and a high-bandwidth peripheral bus. The on-chip DMA engine can move data between peripherals and memory without CPU intervention, freeing the core for control loops and protocol handling. The integrated USB-OTG PHY eliminates external transceivers, reducing BOM cost on USB-equipped embedded products. Typical applications include industrial control panels, USB peripherals (HID, CDC, mass storage), embedded graphics with external TFT controllers, automotive body electronics, point-of-sale terminals, medical instrumentation, and consumer audio devices. The wide operating voltage range (2.3 V to 3.6 V) simplifies battery-powered designs. When designing with this device, ensure that the ICSP trace length between the programming connector and the PGECx/PGEDx pins is minimized to maintain reliable in-circuit serial programming. Decoupling capacitors (0.1 uF + bulk) must be placed close to VDD/AVDD pins. This page synthesizes distributor pricing, drop-in compatible alternatives from the same PIC32MX family, and practical design notes not found in the standalone datasheet to accelerate your component selection.

USD $8.55 有现货
PIC32MX440F512H-80V/MR - 80MHz USB 32-bit MCU 512KB Flash | Microchip
PIC32MX440F512H-80V/MR

PIC32MX440F512H-80V/MR - 80MHz USB 32-bit MCU 512KB Flash | Microchip

The Microchip PIC32MX440F512H-80V/MR is a 32-bit MIPS M4K microcontroller running at 80 MHz (105 DMIPS) with 512 KB Flash and 32 KB SRAM, integrating a USB 2.0 On-The-Go (OTG) full-speed peripheral with integrated PHY, all housed in a 64-pin VQFN (9x9 mm, MR) package. It belongs to the PIC32MX3XX/4XX general-purpose family and operates from 2.5V or 3.3V. An MCU (microcontroller unit) is a single-chip computer containing a CPU core, program and data memory, and integrated peripherals such as timers, communication interfaces, ADCs, and I/O. The PIC32MX family specifically implements the MIPS32 M4K core with a 5-stage pipeline, single-cycle hardware multiply, and MIPS16e code compression for up to 40% smaller code size. Microcontrollers sit within the broader semiconductor hierarchy as a sub-category of embedded processors, optimized for deterministic real-time control with low power consumption. Key features include a dedicated DMA channel for USB OTG, a 10-bit ADC with up to 16 channels, five 16-bit timers/counters, four ICSP/I²C/SPI/UART peripherals, and a Parallel Master Port. The USB OTG controller and integrated transceiver allow direct device/host/OTG connectivity without an external PHY, reducing BOM cost and PCB footprint. The 80 MHz / 105 DMIPS core delivers high computational throughput for protocol stacks, digital signal processing, and graphical user interfaces. Typical applications include USB peripherals (HID, CDC, mass storage, audio), embedded web servers, industrial control nodes with on-board monitoring, and consumer electronics with USB connectivity such as point-of-sale terminals, medical instruments, and gaming controllers. Design considerations: the -80V temperature grade supports 0°C to +85°C (V suffix is commercial-grade) versus -40°C to +85°C for the I grade; verify the operating environment before selection. The 64-pin VQFN package has an exposed thermal pad that must be soldered to a sufficient copper pour for thermal and electrical performance. This page synthesizes distributor pricing, drop-in alternatives within the same VQFN-64 footprint, and practical design notes not aggregated on the manufacturer datasheet alone, helping procurement and embedded engineers select and source the part efficiently.

USD $5.75 有现货
PIC32MX440F512HT-80I/MR - 80MHz 32-bit MCU 512KB Flash | Microchip
PIC32MX440F512HT-80I/MR

PIC32MX440F512HT-80I/MR - 80MHz 32-bit MCU 512KB Flash | Microchip

The Microchip Technology PIC32MX440F512HT-80I/MR is a 32-bit MIPS32 M4K PIC microcontroller operating at up to 80 MHz with 512 KB of Flash program memory and 32 KB of SRAM, housed in a 64-pin VQFN (9x9 mm) package. It integrates USB-OTG, a 10-bit ADC with up to 16 channels, multiple PWM and timer peripherals, and up to 53 general-purpose I/O pins for embedded connectivity and control designs. The device operates from 2.3 V to 3.6 V across the industrial -40C to +85C temperature range. A PIC32MX microcontroller is a 32-bit MIPS-based MCU from Microchip that bridges 8/16-bit PIC designs and full 32-bit Cortex-class processing. Within the broader taxonomy, it belongs to microcontrollers > 32-bit microcontrollers > MIPS RISC microcontrollers > embedded processors > semiconductors. The PIC32MX family uses the MIPS32 M4K core with single-cycle multiply/divide hardware, a 5-stage pipeline, and a 32-bit instruction set compatible with the MIPS32 ISA, while retaining peripheral IP and toolchain familiarity from earlier PIC microcontrollers. Key features of the PIC32MX440F512HT-80I/MR include 80 MHz maximum CPU clock, 512 KB Flash with 32 KB RAM, USB 2.0 full-speed On-The-Go, a 16-channel 10-bit ADC with 1 Msps conversion, four 16-bit timers/counters, five PWM channels with input capture, two I2C and two UART/I2S peripherals, and parallel master port (PMP) for external bus expansion. The 64-pin VQFN package provides 53 digital I/O pins plus dedicated oscillator, programming/debug (PGECx/PGEDx), and supply pins. The "T" suffix denotes tape-and-reel packaging; the "I" suffix denotes industrial temperature grade. Architecturally, the PIC32MX440 integrates the M4K CPU, prefetch cache, dual-bank Flash with runtime self-programmability, DMA controller, and peripheral bus bridge on a single die. The 80 MHz core delivers 1.56 DMIPS/MHz and supports code execution directly from Flash via a 16-entry instruction cache, easing real-time control loops. The integrated USB-OTG PHY removes the need for an external transceiver in USB device/host/OTG designs. Typical applications include USB peripherals (HID, CDC, MSD, audio), industrial control HMI, low-cost graphical LCD interfaces, home automation gateways, and embedded data loggers. The USB-OTG integration suits the part to connected-device designs where a discrete USB PHY would inflate BOM cost. When designing with this device, pay attention to decoupling (100 nF + bulk capacitor at each VDD pin pair), trace length matching for the USB DP/DM differential pair (90 ohms), and adequate thermal relief on the exposed pad of the VQFN. The ICSP pins (PGECx/PGEDx) should be brought to a header for in-circuit programming. This page synthesizes distributor pricing, drop-in package-matched alternatives, and practical design notes not found in the manufacturer datasheet.

USD $6.20 有现货
PIC32MX440F512HT-80V/MR - 80MHz 32-bit MCU 512KB Flash | Microchip
PIC32MX440F512HT-80V/MR

PIC32MX440F512HT-80V/MR - 80MHz 32-bit MCU 512KB Flash | Microchip

The Microchip Technology PIC32MX440F512HT-80V/MR is a 32-bit MIPS32 M4K microcontroller integrating 512 KB Flash, 32 KB RAM, a USB-OTG full-speed peripheral, and a 10-bit ADC, housed in a 64-pin 9x9 mm VQFN (MR) package with exposed thermal pad. It runs at 80 MHz core clock delivering 1.56 DMIPS/MHz (Dhrystone 2.1) and supports industrial temperature range operation. The device combines DSP-like signal processing throughput with the simplicity of a microcontroller and the connectivity of an integrated USB-OTG transceiver. A 32-bit MCU (microcontroller unit) is a single-chip computer integrating a CPU core, program and data memory, peripherals (timers, ADC, communication interfaces), and interrupt logic. PIC32MX4xx parts sit within the wider PIC32 family, between the entry-level PIC32MX1xx/2xx and the higher-end PIC32MX5xx/6xx/7xx series. They target cost-sensitive embedded designs needing 32-bit performance, USB connectivity, and ample code space without the cost of larger Flash/RAM variants. Key features include 512 KB single-voltage Flash with live update support, 32 KB SRAM, 16-channel 10-bit 1 Msps ADC, five 16-bit timers, two I2C, two SPI, two UART, USB-OTG full-speed with on-chip transceiver, four-input DMA controller with 4 KB DMA RAM, and parallel master port. Hardware multiply/divide and a 5-stage pipeline accelerate DSP-oriented firmware. The MR suffix denotes the 64-pin 9x9 mm VQFN with EPAD. Typical applications include USB peripherals and HID devices, industrial control panels, sensor hubs, low-cost audio processing, embedded web servers, and USB-to-UART bridges. The integrated USB-OTG transceiver eliminates external PHY cost on USB-device and embedded-host designs. Industrial-rated silicon (-40C to +105C junction in V-temp parts) supports factory-floor equipment. When designing with this part, allocate a sufficient bulk decoupling capacitor (4.7-10 uF) on VDDCORE and individual 0.1 uF ceramics on each AVDD/AVSS pair. Maintain trace length matching on USB DP/DM to within 4 mm to comply with USB 2.0 FS signal-integrity requirements. Use the parallel master port (PMP) carefully - pin remapping is limited compared to the GPIO. This page synthesizes distributor stock, parametric alternatives, and practical design notes not found in the manufacturer datasheet alone.

USD $5.25 有现货
PIC32MX440F512HT-80V/PT - 512KB Flash 80MHz MCU | Microchip
PIC32MX440F512HT-80V/PT

PIC32MX440F512HT-80V/PT - 512KB Flash 80MHz MCU | Microchip

The Microchip Technology PIC32MX440F512HT-80V/PT is a 32-bit MIPS MCU from the PIC32MX4xx family featuring 512KB Flash, 32KB RAM, and USB-OTG, housed in a 64-pin TQFP (10x10mm) package. It runs at 80MHz core clock, includes a 10-bit ADC, DMA controller, and operates from 2.3V to 3.6V. This is the tape-and-reel / industrial -40C to +105C variant of the PIC32MX440F512H silicon. A 32-bit microcontroller (MCU) is an embedded processor that integrates CPU core, memory (Flash + SRAM), and peripherals on a single die. PIC32MX parts use the MIPS32 M4K core, which executes the MIPS instruction set at up to 80MHz with 5-stage pipeline and hardware multiply/divide. Within Microchip's taxonomy, PIC32MX sits above PIC24 (16-bit) and below the PIC32MZ/MK families, and is widely deployed in industrial, consumer, and USB-connected embedded systems. Key features of this part include USB-OTG (Full-Speed, with internal transceiver), 16-channel 10-bit ADC (1 MSPS), up to 5 UART/SPI/I2C peripherals, parallel master port (PMP) for graphics/parallel memories, and CTMU for capacitive touch. The 512KB Flash supports self-programmability for bootloader and field updates, and 32KB SRAM is enough for typical TCP/IP stacks or graphics frame buffers in mid-range designs. The PIC32MX4xx family uses a Harvard architecture with separate 32-bit instruction and 32-bit data paths, and integrates a prefetch cache to mask Flash wait-states. An integrated 8MHz internal RC oscillator with PLL provides flexible clocking. The 64-TQFP package exposes nearly all I/O (53 I/O pins) plus USB D+/D-, making it ideal for medium-pin-count USB-connected designs. Typical applications include industrial USB peripherals, point-of-sale (POS) terminals, embedded web/HMI servers using TCP/IP stacks, USB OTG device/host bridges, and human-machine interface (HMI) panels. Its combination of USB-OTG, large Flash, and 10-bit ADC makes it a workhorse for cost-sensitive industrial connectivity. When designing with this device, allocate at least 4.0Vcc capacitance (10uF + 0.1uF + 0.01uF) close to VDD/VSS pairs, and use the on-chip LDO (ENVREG pin tied high) to generate the internal 1.8V core rail from a single 3.3V supply. Programming/debugging uses 2-wire ICSP (PGECx/PGEDx); keep these traces short to avoid noise coupling. This page consolidates distributor pricing, verified drop-in alternatives from the same PIC32MX4xx family, and practical design notes not found on a single source page, helping engineers evaluate sourcing options quickly.

USD $6.05 有现货
PIC32MX450F128H-I/MR - 80MHz 128KB Flash 32-bit MCU | Microchip
PIC32MX450F128H-I/MR

PIC32MX450F128H-I/MR - 80MHz 128KB Flash 32-bit MCU | Microchip

The Microchip PIC32MX450F128H-I/MR is a 32-bit MIPS microcontroller from the PIC32MX3/4 family featuring an 80 MHz MIPS32 M4K core, 128 KB of Flash program memory and 32 KB of SRAM, housed in a 64-pin VQFN (MR) package with 9x9 mm body and exposed thermal pad. The device integrates a USB 2.0 Full-Speed OTG controller, two I2S/SPI modules, Peripheral Pin Select (PPS) for flexible peripheral routing, and a Parallel Master Port (PMP) for graphics interfaces. A 32-bit microcontroller (MCU) is a single-chip computer that integrates a CPU, Flash program memory, SRAM data memory, and a rich set of peripherals (timers, ADC, communication controllers) on one silicon die. The PIC32MX family uses the MIPS32 architecture with the M4K microAptiv core, providing 1.56 DMIPS/MHz performance. Within the broader microcontroller hierarchy, the PIC32MX3/4 line sits between 8-bit PIC16/PIC18 devices and 32-bit Cortex-M based MCUs, offering higher performance than 8-bit parts with simpler toolchains than ARM Cortex-M. Key features include 128 KB Flash, 32 KB SRAM, up to 53 available I/O pins via Peripheral Pin Select, a 10-bit 1 Msps ADC with up to 28 input channels, two analog comparators, two I2C, two SPI/I2S, two UART modules, and a Charge Time Measurement Unit (CTMU) for touch and capacitive sensing. The CTMU enables capacitive touch buttons, sliders, and proximity sensing without external analog ICs. The PIC32MX450F128H-I/MR operates from 2.3V to 3.6V, supports -40C to +85C industrial temperature range, and offers 5V-tolerant digital I/O. The integrated USB 2.0 Full-Speed OTG controller supports device, host, and On-The-Go modes, eliminating the need for an external USB transceiver. The Peripheral Pin Select feature allows most digital peripherals to be remapped to any of several I/O pins, simplifying PCB layout. Typical applications include USB peripherals (HID, CDC, mass storage), audio interfaces using I2S, graphics with PMP-driven TFT panels, capacitive touch HMI using CTMU, industrial control with CAN-free connectivity, and consumer embedded devices requiring USB connectivity. The wide peripheral integration reduces external component count and BOM cost in connected embedded products. Designers should note the 64-pin VQFN (MR) footprint has an exposed thermal pad that must be soldered to the PCB ground plane for proper thermal dissipation and electrical performance. The 9x9 mm body allows routing escape for the 53 I/O signals. Decoupling capacitors (100 nF + 4.7 uF) must be placed within 3 mm of each VDD/VSS pair to ensure stable core and I/O operation. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet alone.

USD $4.10 有现货
PIC32MX450F128H-I/RG - 32-bit MCU, 128KB Flash, USB-OTG | Microchip
PIC32MX450F128H-I/RG

PIC32MX450F128H-I/RG - 32-bit MCU, 128KB Flash, USB-OTG | Microchip

The Microchip Technology PIC32MX450F128H-I/RG is a 32-bit MIPS32 M4K microcontroller integrating 128 KB of Flash and 16 KB of SRAM, delivered in a 64-pin QFN (9x9 mm) package and specified for the industrial -40C to +85C temperature range. The device runs the PIC32MX3/4 core at up to 80 MHz (Mouser listing) or up to 100 MHz/131 DMIPS (Microchip family datasheet), with the marketing maximum of 120 MHz / 150 DMIPS achievable at 2.3V to 3.6V on certain family members. A 32-bit microcontroller (MCU) is a single-chip computer whose central processing unit has a 32-bit data path, 32-bit registers, and a 32-bit address bus. The PIC32MX family sits in the PIC (Peripheral Interface Controller) lineage from Microchip, which evolved from 8-bit and 16-bit cores into a MIPS-derived 32-bit architecture. Within the broader taxonomy, the PIC32MX450F128H belongs to microcontrollers -> embedded processors -> RISC microcontrollers -> 32-bit microcontrollers -> semiconductor ICs. Key on-chip resources include a Full-Speed USB 2.0 On-The-Go (OTG) controller, two I2S/SPI modules for codec and serial audio, a Parallel Master Port (PMP) for graphics, Peripheral Pin Select (PPS) for flexible signal routing, a Charge Time Measurement Unit (CTMU), a 10-bit 1 Msps ADC with up to 28 channels, two analog comparators, two I2C peripherals, five 16-bit timers/counters, and standard 5V-tolerant GPIO on most pins. Code protection, JTAG/ICSP debugging, and a real-time clock calendar are also integrated. Architecturally, the PIC32MX450F128H uses the Harvard-style MIPS M4K core with separate instruction and data buses, prefetch cache, and a tightly-coupled DMA-free peripheral set. The result is deterministic interrupt latency and competitive MIPS/mW figures for low-cost 32-bit designs. Prefetch and Flash cache accelerate the 128 KB Flash array, while the 16 KB SRAM supports RAM-intensive stacks, USB descriptors, and graphics framebuffers without external memory. Typical applications include USB audio interfaces and USB HID/CDC devices, HMI panels with PMP-driven TFT or OLED displays, low-cost barcode scanners, home appliances with touch sensing via CTMU, industrial sensor hubs with CAN-ready bridges, IoT edge nodes using USB as the connectivity tether, and medical instrument front-ends. The integrated USB-OTG removes the need for an external PHY, lowering BOM cost on these designs. When designing with this part, choose the variant speed code carefully: -I/RG is the 80 MHz industrial-grade version in 64-QFN. If your design needs more headroom, evaluate the PIC32MX450F256H (256 KB Flash) or PIC32MX470F512H (512 KB Flash), both in the same 64-QFN footprint for a near-drop-in upgrade. Decoupling must include 100 nF on every VDD/AVDD pair plus a bulk 4.7-10 uF to keep the USB PLL and core logic rails quiet. This page synthesizes current distributor pricing, drop-in same-package alternatives, and practical design notes that go beyond a single datasheet, helping engineers shortlist PIC32MX replacements without sacrificing USB-OTG, graphics, or audio features.

USD $2.79 有现货
PIC32MX450F128H-V/RG - 32-bit MCU, 80MHz, 128KB Flash, USB | Microchip
PIC32MX450F128H-V/RG

PIC32MX450F128H-V/RG - 32-bit MCU, 80MHz, 128KB Flash, USB | Microchip

The Microchip Technology PIC32MX450F128H-V/RG is a 32-bit MIPS M4K microcontroller running up to 80 MHz with 128 KB of Flash program memory, housed in a 64-pin QFN (RG) 9x9 mm package with exposed thermal pad. It combines a high-performance RISC core with a rich set of integrated peripherals including two SPI/I2S, two I2C, four UART, two SPI, and a full-speed USB 2.0 device/host/OTG controller, making it ideal for cost-sensitive embedded applications that still demand USB connectivity. A microcontroller (MCU) is an integrated circuit that combines a CPU core, RAM, non-volatile Flash memory, and a wide range of peripheral interfaces in a single silicon die. PIC32 devices from Microchip extend the well-known 8-bit PIC architecture into the 32-bit MIPS M4K domain, providing 1.56 DMIPS per MHz (up to 150 DMIPS at 120 MHz). Within the broader taxonomy, this part sits in the category: microcontroller -> 32-bit MCU -> MIPS RISC MCU -> PIC32 family -> PIC32MX3/4 sub-family, which targets Audio/Graphics/Touch (HMI) and USB applications. Key features include 128 KB Flash with 16 KB RAM, a 10-bit ADC up to 1 Msps with up to 28 channels, 5 PWM outputs, 6 DMA channels for CPU-offload data movement, and a CTMU peripheral for capacitive touch sensing. The device operates from 2.3 V to 3.6 V, supports an industrial temperature range of -40C to +105C in the V (extended) variant, and integrates a real-time clock-calendar, a 16-bit timer/counter, and JTAG/ICSP debug ports. The architecture leverages a 5-stage pipeline MIPS M4K core with hardware multiply/divide and a unified prefetch cache, delivering deterministic interrupt response at 80 MHz. The integrated USB 2.0 full-speed PHY, paired with DMA-driven endpoints, enables HID, CDC, MSD, and vendor-class stacks without external transceivers, while the CTMU simplifies touch-button and slider designs. Typical applications include USB HID peripherals (keyboards, mice, custom input devices), low-cost audio accessories with I2S, capacitive-touch human-machine interfaces, USB-to-UART bridges, embedded web/IoT nodes, and consumer-electronics control panels. For each of these, the 128 KB Flash is sufficient for USB stacks plus application firmware. When designing with this part, pay attention to the decoupling network: at least 10 uF bulk plus 0.1 uF ceramics per VDD/VSS pair is recommended, and the exposed pad must be soldered to the ground plane for both thermal dissipation and signal integrity. For USB applications, route the D+/D- traces as a 90-ohm differential pair. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet, giving engineers a one-stop engineering reference.

USD $4.32 有现货
PIC32MX450F128HT-I/MR - 80MHz 32-bit MCU 128KB Flash | Microchip
PIC32MX450F128HT-I/MR

PIC32MX450F128HT-I/MR - 80MHz 32-bit MCU 128KB Flash | Microchip

The Microchip Technology PIC32MX450F128HT-I/MR is a 32-bit MIPS32 M4K microcontroller operating up to 80 MHz with 128 KB of Flash program memory and 32 KB of SRAM, housed in a 64-pin VQFN (9x9 mm) package with industrial-grade -40C to +85C temperature rating. It integrates two analog comparators, two I2C, two SPI/I2S, five UART, and a USB 2.0 Full-Speed OTG controller, with 28 channels of 10-bit ADC. A 32-bit microcontroller (MCU) is an integrated circuit containing a 32-bit CPU core, volatile and non-volatile memory, and a rich set of programmable peripherals. PIC32MX MCUs from Microchip sit in the broader category of embedded microcontrollers, themselves a class of microprocessors tuned for deterministic real-time control. The PIC32MX family uses the MIPS32 M4K Harvard architecture, providing single-cycle multiplication and hardware Multiply-Accumulate (MAC) support for DSP-like workloads while retaining a low power budget. Key features include 128 KB Flash with self-programming in-field upgrade support, 32 KB RAM, 5 UART, 2 SPI/I2S, 2 I2C, USB-OTG Full-Speed, 5 timers, 4-channel DMA, and 28 channels of 10-bit ADC providing 1 Msps conversion. The 80 MHz core delivers up to 1.53 DMIPS/MHz per the MIPS M4K pipeline, making the part suitable for embedded graphics, USB peripherals, and connectivity stacks. Architecture-wise, the device combines 32-bit MIPS execution with Microchip's peripheral set, allowing seamless migration from PIC24/dsPIC33 code bases through Microchip's Harmony framework. An integrated 8-channel DMA engine moves data between peripherals and RAM without CPU intervention, freeing the core for control and stack processing. The 64-pin VQFN package exposes up to 49 user I/O pins. Typical applications include USB peripherals (HID, CDC, MSD), industrial control with CAN-style timing, low-cost graphics HMI using PMP, embedded audio playback via I2S, and low-power connected sensors with USB charging. The industrial temperature range makes the part suitable for factory floor instrumentation. Designers should route the four USB DP/DN lines as a 90-ohm differential pair with a precise 45 ohm series resistor at the device side, and place the VBUS/VUSB3V3 decoupling capacitor within 3 mm of the corresponding pin. The internal 8 MHz Fast RC oscillator can be used for USB operation but a calibrated 48 MHz is required for Full-Speed USB. This page synthesizes distributor pricing, drop-in PIC32MX family alternatives, USB reference design notes, and DMA-driven design patterns not consolidated in a single manufacturer datasheet section.

USD $2.81 有现货
PIC32MX450F128HT-I/PT - 80MHz 32-bit MCU 128KB Flash USB | Microchip
PIC32MX450F128HT-I/PT

PIC32MX450F128HT-I/PT - 80MHz 32-bit MCU 128KB Flash USB | Microchip

The Microchip PIC32MX450F128HT-I/PT is a 32-bit MIPS M4K microcontroller operating up to 80 MHz, integrating 128 KB of Flash program memory and 32 KB of SRAM into a 64-pin TQFP (10x10 mm) package. Designed for low-cost embedded designs that need USB 2.0 Full-Speed, the device also offers 10-bit ADC, two analog comparators, two I2C, two SPI/I2S, and 28 channels of dedicated DMA-capable I/O. The 'T' suffix in the part number indicates Tape & Reel packaging, and the industrial -I grade supports an extended -40C to +85C operating range. A microcontroller (MCU) is a single-chip computer that integrates a CPU core, program memory (Flash), working memory (RAM), and a rich set of peripherals (ADC, timers, communication interfaces) into one device. Within the broader semiconductor taxonomy, the PIC32MX family belongs to microcontrollers -> embedded processors -> ICs. The MIPS M4K core implements a 32-bit RISC architecture, and at 80 MHz the device delivers 1.56 DMIPS/MHz-class performance, well above legacy 8-bit PIC MCUs while remaining code-compatible with the established PIC ecosystem. Key features of the PIC32MX450F128HT-I/PT include integrated USB 2.0 Full-Speed On-The-Go (OTG) with dedicated DMA, a 10-bit 1 Msps ADC, two analog comparators with programmable reference, RTCC hardware calendar/clock, and Configurable Logic Cell (CLC) blocks for glue-logic replacement. The PIC32MX3/4 peripheral set is widely documented across hundreds of application notes and frameworks such as MPLAB Harmony 3. Typical applications include USB peripherals (HID, CDC, MIDI, custom-class), industrial control front-ends, multi-channel sensor aggregation, and consumer audio subsystems that benefit from I2S. The USB OTG and high channel-count DMA also make this MCU attractive for Human-Interface Devices and low-latency control loops. When designing with this part, plan for the 2.5 V / 3.3 V supply domain and add a 32-bit differential capacitor on VDD/VSS, plus an external 12 MHz or 24 MHz crystal for USB operation. Firmware should be developed in MPLAB X IDE with Harmony 3 to allow software to reuse the USB stack, DMA drivers, and TCP/IP libraries that ship in the framework. This page synthesizes distributor pricing, verified drop-in alternatives, and practical design notes not found in the manufacturer datasheet, giving engineers a single reference for sourcing, replacement, and bring-up of the PIC32MX450F128HT-I/PT.

USD $3.65 有现货
PIC32MX450F128HT-I/RG - 80MHz 32-bit MCU 128KB Flash | Microchip
PIC32MX450F128HT-I/RG

PIC32MX450F128HT-I/RG - 80MHz 32-bit MCU 128KB Flash | Microchip

The Microchip Technology PIC32MX450F128HT-I/RG is a 32-bit MIPS M4K microcontroller running at 80 MHz, integrating 128 KB of Flash and 32 KB of SRAM in a 64-pin QFN (RG) 9x9 mm package with an exposed thermal pad. It is part of the PIC32MX3/4 family, which combines 32-bit performance with rich integrated peripherals at low cost for embedded applications. A 32-bit microcontroller (MCU) is a programmable computing device that executes instructions from a 32-bit-wide data path, enabling higher code density, faster arithmetic, and richer peripheral integration than 8-bit or 16-bit MCUs. The PIC32MX series is part of the broader MCU taxonomy: 32-bit MCU -> microcontroller -> programmable logic device -> semiconductor. It uses the MIPS32 M4K core, a Harvard-architecture RISC processor widely adopted in networking, industrial, and consumer applications. Key features include 80 MHz operation, 128 KB Flash program memory, 32 KB SRAM, two SPI/I2S modules, two I2C modules, two UART modules, 28 ADC channels with 10-bit resolution, five 16-bit timers/counters, and a parallel master port. Operating voltage is 2.3V to 3.6V with industrial temperature range of -40C to +85C. The exposed thermal pad on the 64-QFN package enhances thermal dissipation. The PIC32MX450F128H architecture uses a 5-stage pipeline M4K core capable of 1.53 DMIPS/MHz, with single-cycle multiplication, hardware multiply-accumulate, and zero-overhead loop control. Peripheral integration includes USB 2.0 Full-Speed On-The-Go, CAN 2.0B, and up to 53 general-purpose I/O pins, supporting versatile mixed-signal embedded designs. Typical applications include industrial control, USB peripherals, automotive body electronics, home appliances, consumer electronics, and IoT edge devices. The combination of USB, CAN, ADC, and rich communication interfaces suits sensor hubs and HMI touch controllers. When designing with this device, ensure proper decoupling with 100 nF capacitors placed close to each VDD pin and a bulk capacitor on the VBAT rail. The exposed thermal pad must be soldered to a copper pour to meet thermal specifications and provide a low-impedance ground return.

USD $4.15 有现货
PIC32MX450F128HT-V/RG - 32-bit MCU, 128KB Flash, 64-QFN | Microchip
PIC32MX450F128HT-V/RG

PIC32MX450F128HT-V/RG - 32-bit MCU, 128KB Flash, 64-QFN | Microchip

The Microchip Technology PIC32MX450F128HT-V/RG is a 32-bit MIPS32 M4K microcontroller offering 128KB Flash, 16KB SRAM, and a 64-pin 9x9 mm QFN (RG) package with automotive-grade qualification under the -V temperature range. The device runs at up to 80 MHz core clock and integrates a USB 2.0 full-speed OTG controller, two I2C, two SPI/I2S, five UART, two comparators, a 28-channel 10-bit ADC, RTCC, DMA, and PMP. A 32-bit microcontroller (MCU) is a single-chip computer whose data path, registers, and arithmetic logic unit operate on 32 bits per instruction, enabling higher throughput, larger linear address space, and richer peripheral integration than 8-bit or 16-bit MCUs. The PIC32MX4 family specifically targets cost-sensitive embedded designs that need 32-bit performance plus USB connectivity, sitting in the broader hierarchy MCU -> microcontroller -> embedded controller -> semiconductor. Key specifications include 128 KB Flash program memory organized as 128K x 8, 16 KB SRAM data memory, 8 KB bootloader Flash, and a 1.2 DMIPS/MHz core delivering up to 96 DMIPS at 80 MHz. The integrated USB 2.0 full-speed OTG transceiver eliminates the need for an external PHY, while the 28-channel 10-bit ADC with 1 Msps throughput supports mixed-signal acquisition. The PIC32MX450F128H architecture combines a Harvard bus structure with a 5-stage pipeline, single-cycle 32x32 hardware multiplier, and zero-overhead hardware debug interface. The -V (automotive) variant supports an extended junction temperature range suitable for under-hood and AEC-Q100 qualified designs. Typical applications include USB peripherals and HID devices, automotive body controllers, industrial sensor hubs, low-cost graphical HMI with PMP, and consumer appliances requiring 32-bit performance with USB connectivity. The wide peripheral mix allows BOM reduction by integrating ADC, comparators, and USB on-chip. When designing with this MCU, ensure the 64-QFN exposed pad is soldered to a sufficient copper pour (minimum 1 square inch of 1 oz copper) to meet thermal resistance specification. Use the internal 8 MHz FRC with PLL configuration for low-EMI designs, and enable the JTAG/SWD trace interface for boundary-scan testing. This page synthesizes distributor pricing, automotive-grade drop-in alternatives, and practical PCB layout notes not consolidated on the manufacturer product page.

USD $4.42 有现货
PIC32MX450F128L-V/PF - 80MHz 32-bit MCU 128KB Flash 100-TQFP | Microchip
PIC32MX450F128L-V/PF

PIC32MX450F128L-V/PF - 80MHz 32-bit MCU 128KB Flash 100-TQFP | Microchip

The Microchip PIC32MX450F128L-V/PF is a 32-bit MIPS32 M4K microcontroller running at 80 MHz with 128 KB Flash and a USB 2.0 Full-Speed OTG controller, housed in a 100-pin TQFP package (14x14 mm). It integrates a rich peripheral set including two I2S/SPI modules for audio codec and serial communication, Peripheral Pin Select (PPS) for flexible signal routing, and a Parallel Master Port (PMP) for graphics interfaces, plus a Charge Time Measurement Unit (CTMU) for capacitive touch sensing. Operating voltage is 2.3V to 3.6V across an industrial temperature range of -40C to +105C, making it suitable for harsh environments and consumer/industrial HMI products. A microcontroller (MCU) is a single-chip computer that integrates a CPU core, memory (Flash for code, SRAM for data), and a programmable peripheral set around an internal bus. The PIC32MX450 belongs to the broader PIC32 family of MIPS-based 32-bit microcontrollers, which sits within Microchip's MCU portfolio alongside PIC16, PIC18, PIC24/dsPIC, and SAM Cortex-M lines. The "MX" family specifically targets USB-enabled, audio/graphics/touch (HMI) applications with up to 512 KB Flash and 128 KB SRAM per device, making it well-suited for connected embedded designs that need deterministic real-time performance plus a USB device/host/OTG interface. Key features of the PIC32MX450F128L-V/PF include up to five 16-bit timers, two analog comparators, two I2C and two SPI/I2S modules, 28 ADC channels (10-bit, 1 MSPS), a 5-bit DAC, and 84 GPIO-capable I/O lines through the PPS system. The -V speed grade specifies 80 MHz operation, while the -120 variant of the same die supports 120 MHz for performance-hungry designs. The part carries industrial-grade temperature qualification (V suffix in this MPN line typically denotes the 105C-rated operating range), and the /PF suffix denotes the 100-pin TQFP (14x14 mm) package with Pb-free / RoHS lead finish. Typical applications for this part include USB Human Interface Devices (HID), audio playback and recording products with I2S codecs, low-cost graphics HMI panels using PMP to external LCD controllers, capacitive-touch control panels via CTMU, and connected sensor hubs that need USB device connectivity. The combination of USB OTG, I2S, and PMP makes it a particularly strong fit for consumer audio accessories and small HMI products. When designing with this part, allocate decoupling capacitance (typically 100 nF plus 10 uF bulk) close to each VDD/AVDD pair, route the USB DP/DM lines as a 90 ohm differential pair with a stable ground reference, and configure the PLL and FRC postscaler carefully to hit the desired system clock while keeping USB's 48 MHz reference jitter within the USB 2.0 specification. This page synthesizes distributor pricing, same-package drop-in alternatives within the PIC32MX family, and practical USB/audio/HMI design notes that go beyond the manufacturer datasheet to help embedded engineers select and source the right 100-TQFP variant for their application.

USD $5.31 有现货
PIC32MX450F128L-V/PT - 32-bit MCU 80MHz 128KB Flash 100-TQFP | Microchip
PIC32MX450F128L-V/PT

PIC32MX450F128L-V/PT - 32-bit MCU 80MHz 128KB Flash 100-TQFP | Microchip

The Microchip Technology PIC32MX450F128L-V/PT is a 32-bit MIPS32 M4K PIC microcontroller running at up to 80 MHz (100 MHz max with the family), with 128 KB of Flash program memory and 32 KB of SRAM, housed in a 100-pin TQFP (PT) package. It integrates a USB 2.0 Full-Speed OTG controller, two I2S/SPI modules, Peripheral Pin Select (PPS), a Parallel Master Port (PMP) for graphics, and a Charge Time Measurement Unit (CTMU) for touch and capacitive sensing. A 32-bit microcontroller (MCU) is a single-chip computer whose data bus, registers and ALU are 32 bits wide, providing higher throughput, larger addressable memory and richer peripherals than 8-bit or 16-bit MCUs. PIC32MX4 devices belong to the broader Microchip PIC32 family of MIPS-based microcontrollers, which sit hierarchically within the MCU -> microcontroller -> embedded computing -> semiconductor taxonomy, and they integrate flash, SRAM, analog and digital peripherals in a single chip to enable compact embedded designs. Key features of the PIC32MX450F128L-V/PT are an operating voltage range of 2.3V to 3.6V, an industrial temperature range of -40C to +105C, dual I2C, dual SPI/I2S, dual UART, a 10-bit ADC with up to 28 channels, an 8-bit Parallel Master Port, a Real-Time Clock and Calendar (RTCC), five 16-bit timers/counters and Peripheral Pin Select that remaps most digital peripherals to almost any I/O pin. Architecturally, the part uses a 5-stage pipelined MIPS32 M4K core with hardware multiply/divide and a single-cycle 32-bit ALU. The integrated Full-Speed USB 2.0 OTG controller (12 Mbps) with on-chip transceiver, dedicated DMA and dedicated RAM reduces external component count, while PPS allows designers to assign UART/SPI/I2S/timer functions to almost any I/O pin, simplifying PCB layout when remapping peripherals between board revisions. Typical applications include USB peripherals and Human Interface Devices (HID), audio playback or recording with the I2S ports, low-cost graphical HMI panels with the PMP, capacitive-touch user interfaces, industrial control nodes, and connected sensor / IoT endpoints. When designing with this device, pair it with a 3.3V LDO such as the MCP1700 and a 4-layer PCB for clean USB signal integrity. The "V" temperature grade suffix limits operation to -40C to +105C - if you need the full -40C to +125C industrial grade, choose the "/I" or "/E" suffix variant instead. This page synthesizes distributor stock from DigiKey and Mouser, the Microchip parametric page and family data sheet, same-brand drop-in alternatives from the PIC32MX3/4 family and a cross-brand drop-in option, plus design notes that go beyond what the data sheet provides.

USD $4.10 有现货
PIC32MX450F128L-V/TL - 80MHz 32-Bit MCU 128KB Flash USB | Microchip
PIC32MX450F128L-V/TL

PIC32MX450F128L-V/TL - 80MHz 32-Bit MCU 128KB Flash USB | Microchip

The Microchip Technology PIC32MX450F128L-V/TL is a 32-bit MIPS32 M4K microcontroller running up to 80 MHz, integrating 128 KB Flash and 16 KB SRAM in a 124-pin VTLA (9x9 mm) surface-mount package with exposed pad. It belongs to the PIC32MX3/4 family, designed as a low-cost 32-bit MCU with USB 2.0 full-speed (USB-OTG), two SPI/I2S interfaces, two I2C, two UART, an 8-bit PMP for graphics or external memory, and a 10-bit 1 Msps ADC with up to 28 analog channels. A 32-bit microcontroller (MCU) is an integrated circuit that combines a 32-bit processor core, program and data memory, and a configurable set of on-chip peripherals (ADC, timers, communication interfaces, I/O) on a single silicon die. Microcontrollers sit at the top of the embedded-system hierarchy: system-on-module -> MCU -> CPU core -> instruction set, enabling battery-powered and cost-sensitive products to perform deterministic real-time control. The PIC32MX series uses the MIPS32 instruction set with the M4K pipeline to deliver up to 150 DMIPS while keeping active power below 1 mA/MHz in typical conditions. Key features of the PIC32MX450F128L-V/TL include 128 KB Flash (128K x 8), 16 KB SRAM, USB 2.0 full-speed OTG with on-chip transceiver, two analog comparators with 2 us response, a 10-bit 1 Msps ADC with 28 channels, five 16-bit timers/captures, and a Parallel Master Port for graphics or memory expansion. The -V grade denotes an operating range of -40C to +105C; the /TL suffix identifies a 124-VTLA tray/tube packaging variant. Architecturally the device uses a Harvard-style bus with separate Flash and RAM paths, a 5-stage M4K pipeline, and a multi-vector interrupt controller. The 124-VTLA package exposes up to 97 general-purpose I/O pins and a dedicated trace interface for real-time instruction trace through dedicated TRCLK/TRDx pins, which simplifies firmware debugging on production hardware. Typical applications include USB-equipped industrial HMI panels, audio playback devices using SPI/I2S codecs, low-cost graphics terminals using the PMP bus, sensor aggregation hubs with USB-CDC virtual COM port, and USB HID/mouse/keyboard controllers. Its combination of USB, PMP, and 28-channel ADC makes it well suited to multi-signal embedded designs. When designing with this part, allocate the exposed thermal pad (EP) directly under the IC to a continuous top-layer ground pour to keep junction temperature within the 105C operating envelope. The PIC32MX3/4 datasheet recommends a 10 uF + 0.1 uF decoupling pair on each VDD/VSS pin pair placed within 5 mm of the package, and a dedicated ferrite-bead-isolated USB VBUS rail to keep high-frequency USB transients away from the analog supply. This page synthesizes the Microchip datasheet, current DigiKey/Mouser pricing, drop-in same-package alternatives, and practical PCB and USB-bus design notes not aggregated in any single distributor listing.

USD $4.82 有现货