微控制器

产品（18688)

PIC32MZ1024ECH144T-I/PL - 200MHz 1MB Flash MCU w/ ENET&CAN | Microchip
PIC32MZ1024ECH144T-I/PL

PIC32MZ1024ECH144T-I/PL - 200MHz 1MB Flash MCU w/ ENET&CAN | Microchip

The Microchip Technology PIC32MZ1024ECH144T-I/PL is a 32-bit MIPS32 microAptiv PIC32MZ microcontroller running up to 200 MHz, with 1 MB of Flash program memory and 512 KB of SRAM, housed in a 144-pin LQFP (20x20 mm, 0.5 mm pitch) package. It is the connectivity variant of the PIC32MZ EC family, integrating a 10/100 Ethernet MAC, USB 2.0 High-Speed PHY, and two CAN 2.0b controllers alongside the high-performance core. A 32-bit MCU (microcontroller) is a single-chip processor integrating a CPU core, program memory, RAM, peripherals, and I/O. The PIC32MZ EC family belongs to the broader MIPS32 microAptiv architecture from Microchip, which targets deterministic real-time control with Harvard bus separation, hardware multiply/divide, DSP extensions, and DSP-enhanced instructions. PIC32 devices sit between 8-bit PIC16/PIC18 MCUs and 32-bit Cortex-M4/M7 ARM devices, offering higher code density than 8-bit parts while remaining simpler than application processors. Key features of this variant include 200 MHz / 252 MIPS core performance, 1 MB Flash with 512 KB RAM, a 12-bit 18 MSPS ADC, four analog comparators, nine timers, nine I/O-capable 16-bit timers/counters, six UART, three SPI, four I2C, two I2S, two CAN, and SQI (Serial Quad Interface) for high-speed external flash. The PIC32MZ1024ECH144T-I/PL is the connectivity edition, with the integrated 10/100 Mbps Ethernet MAC, USB-HS PHY, and two CAN modules. Architecturally, the chip uses a 5-stage pipelined MIPS32 core with hardware multiply/divide, dual-port SRAM, and a dedicated DMA controller with up to eight channels for offloading memory-to-peripheral transfers. The on-chip FPU and DSP extensions accelerate signal-processing workloads in audio, motor control, and graphics. Typical applications include industrial Ethernet gateways, PLC controllers, building-automation nodes, USB instrument peripherals, automotive CAN bridge nodes, IoT edge devices, and HMI panels. Designers select this part when they need Microchip's MPLAB Harmony toolchain, MIPS core compatibility, and integrated connectivity peripherals without external PHY/MAC chips. When designing with this MCU, ensure your supply rail uses a 2.3V-3.6V LDO with bulk decoupling; the 144-LQFP package dissipates up to approximately 0.5 W depending on peripheral activation. Plan for crystal stability and trace impedance on USB and Ethernet differential pairs. This page synthesizes distributor pricing, drop-in alternatives within the PIC32MZ family, and practical design notes that go beyond the manufacturer datasheet's electrical specs.

USD $9.55 有现货
PIC32MZ1024ECM064-I/MR - 200MHz 32-bit MCU 1MB Flash | Microchip
PIC32MZ1024ECM064-I/MR

PIC32MZ1024ECM064-I/MR - 200MHz 32-bit MCU 1MB Flash | Microchip

The Microchip Technology PIC32MZ1024ECM064-I/MR is a 32-bit MIPS32 microAptiv-based microcontroller operating up to 200 MHz, integrating 1 MB Flash and 512 KB SRAM in a 64-pin VQFN (9x9 mm) package. As a member of the PIC32MZ Embedded Connectivity (EC) family, it delivers 330 DMIPS and 3.28 CoreMark/MHz, supported by microMIPS mode for up to 35% smaller code size. The device operates from 2.2 V to 3.6 V and integrates high-speed USB, Ethernet MAC, crypto accelerator, dual-panel live-update Flash, and a 12-bit 1.2 MSPS analog-to-digital converter. A microcontroller (MCU) is a single-chip computer that integrates a CPU core, program memory (Flash), data memory (SRAM), and programmable peripherals around a common bus. The PIC32MZ EC family sits in the high-performance tier of Microchip's 32-bit portfolio, positioned between mainstream Cortex-M4/M7 parts and dedicated application processors. Within the broader hierarchy, the PIC32MZ EC is a microcontroller -> 32-bit MCU -> MIPS-based MCU -> embedded connectivity MCU -> semiconductor IC. Key differentiating features include the hardware crypto engine for AES, 3DES, SHA, and MD5 acceleration, a Hi-Speed USB 2.0 OTG controller with integrated PHY, a 10/100 Mbps Ethernet MAC with RMII/MII interface, and six UART, four I2C, and four SPI peripherals for multi-bus connectivity. The dual-panel Flash architecture enables live firmware updates without CPU stall, critical for industrial and IoT applications that must remain online during OTA rollouts. The microAptiv core includes a DSP-enhanced pipeline with four 64-bit accumulators, single-cycle MAC, and saturating/fractional math, enabling real-time audio, motor control, and signal-processing workloads. The integrated FPU is absent on this part, but floating-point emulation runs efficiently in microMIPS mode. The 28-channel, 12-bit 1.2 MSPS ADC paired with six analog comparators supports precision sensor acquisition in motor control and instrumentation front-ends. Typical applications include industrial Ethernet gateways, USB-enabled HMI panels, secure IoT edge nodes with TLS offload, motor control BLDC/PMSM drives, and audio processing front-ends that benefit from the live-update Flash. The 64-VQFN package with 9x9 mm footprint also suits space-constrained designs where TQFP would be impractical. Cryptographic acceleration and TRNG make the EC family a fit for any connected device requiring hardware-rooted identity and TLS 1.2/1.3 handshake acceleration. When designing with this MCU, allocate decoupling capacitance of at least 0.1 microfarad per Vdd/Vss pair placed within 5 mm of the supply pins, and provide a 12 MHz primary crystal or resonator to drive the PLL that synthesizes the 200 MHz system clock. Do not exceed 3.6 V on any I/O pin; 5 V tolerant pins must be configured and treated as high-voltage inputs only. This page synthesizes distributor pricing, drop-in same-package alternatives within the PIC32MZ EC family, and practical design notes not found in the manufacturer datasheet alone.

USD $6.40 有现货
PIC32MZ1024ECM064-I/PT - 200MHz 32-bit MCU 1MB Flash | Microchip
PIC32MZ1024ECM064-I/PT

PIC32MZ1024ECM064-I/PT - 200MHz 32-bit MCU 1MB Flash | Microchip

The Microchip Technology PIC32MZ1024ECM064-I/PT is a high-performance 32-bit microcontroller from the PIC32MZ Embedded Connectivity (EC) family, built on the MIPS32 microAptiv core and operating at up to 200 MHz. The device integrates 1 MB of Flash program memory and 512 KB of SRAM in a 64-pin TQFP (10x10 mm) package, targeting Ethernet-connected, crypto-accelerated, and CAN-enabled industrial designs. A 32-bit microcontroller (MCU) is an embedded processor that executes instructions over a 32-bit data path, enabling higher throughput than 8/16-bit MCUs while retaining deterministic real-time behavior. Within the broader semiconductor hierarchy, an MCU sits below microprocessors in compute capability but above simple logic ICs in integration; PIC32 devices occupy the high-performance tier of Microchip's MCU portfolio, bridging the gap between traditional 8/16-bit PIC microcontrollers and application processors. The EC sub-family specifically adds hardware cryptography, Ethernet, and high-speed USB to the standard peripheral set. Key features of the PIC32MZ1024ECM064 include a 200 MHz core with 1.5 DMIPS/MHz performance, 1 MB Flash, 512 KB SRAM, dedicated crypto engine (AES, 3DES, SHA, MD5), integrated 10/100 Ethernet MAC, dual CAN 2.0b controllers, USB 2.0 high-speed OTG, and a 12-bit 18-channel ADC at 500 ksps. The device supports 5V-tolerant I/O with 32 mA source/sink capability, configurable open-drain, pull-ups, pull-downs, and external interrupts on every I/O pin, plus a Class B Safety Library for IEC 60730 compliance. The PIC32MZ1024ECM064 uses a 5-stage pipelined MIPS32 microAptiv core with single-cycle hardware multiply/divide and a tightly-coupled prefetch module that minimizes Flash wait states. Its 80 MHz peripheral bus is independent of the core clock, allowing deterministic DMA and communication timing. The integrated crypto accelerator offloads AES/SHA operations from the core, and the dedicated Ethernet MAC with RMII/MII interfaces simplifies connected-Node designs. Typical applications include industrial IoT gateways, Ethernet-connected motor controllers, building automation controllers, secure POS terminals, and CAN-enabled automotive body modules. The combination of 1 MB Flash and crypto acceleration also makes the part suitable for over-the-air (OTA) updatable firmware with signed-image verification. When designing with this device, allocate sufficient decoupling (100 nF + 10 uF per VDD pin pair) and follow Microchip's TQFP-64 land pattern recommendations to maintain signal integrity on the 200 MHz core. For new designs Microchip recommends migrating to the PIC32MZ EF family which adds a Floating Point Unit and improved peripherals; the EC family remains supported but is marked NRND (Not Recommended for New Designs). This page synthesizes verified distributor pricing, 5 drop-in package-compatible alternatives, and practical PCB/application guidance that go beyond the manufacturer datasheet to accelerate your selection and qualification workflow.

USD $7.48 有现货
PIC32MZ1024ECM064T-I/PT - 32-bit 200MHz 1MB Flash MCU | Microchip
PIC32MZ1024ECM064T-I/PT

PIC32MZ1024ECM064T-I/PT - 32-bit 200MHz 1MB Flash MCU | Microchip

The Microchip Technology PIC32MZ1024ECM064T-I/PT is a high-performance 32-bit MIPS32 microAptiv PIC32 microcontroller running at 200 MHz with 1 MB of Flash and 524 KB of SRAM, housed in a 64-pin TQFP (10x10 mm) package. It delivers up to 46 user I/O lines, supports 3.3V operation, and integrates an FPU for high-throughput DSP-class workloads. The -I grade silicon is rated for the industrial -40C to +85C temperature range, making it suitable for harsh-environment embedded systems. A 32-bit microcontroller (MCU) is a programmable system-on-chip that combines a 32-bit processor core, Flash program memory, SRAM, and a rich peripheral set on a single die. The PIC32 family sits at the high-performance end of Microchip's MCU portfolio and is widely used as the central controller in industrial, consumer, and connectivity applications where deterministic real-time performance and ample code space are critical. Key features of this part include 1 MB Flash, 512 KB SRAM plus 4 KB of battery-backed backup RAM, an 8-channel DMA controller, two Hi-Speed USB 2.0 PHYs (host + device), 10/100 Ethernet MAC, dual CAN 2.0b controllers, six UART, five SPI, four I2C, an 8-channel 12-bit 1.2 Msps ADC, and a hardware crypto engine. The microAptiv core supports DSP and SIMD instructions, giving C-compiled DSP code substantially higher throughput than the older MIPS M4K core used in PIC32MX parts. Typical applications include industrial automation controllers, high-throughput IoT gateways with Ethernet and dual USB, graphical HMI panels, motor-control and digital-power servo loops, automotive infotainment prototypes, and medical instrumentation. The wide peripheral integration lets designers drop external bridges and reduce BOM cost. When designing with this device, budget 200 MHz of core speed against your real-time deadlines and verify the trace impedance for the Ethernet and USB differential pairs on a 4-layer stack-up. The 'T' suffix denotes tape-and-reel packaging for high-volume SMT assembly lines.

USD $8.95 有现货
PIC32MZ1024ECM100-I/PF - 200MHz 1MB Flash MCU | Microchip
PIC32MZ1024ECM100-I/PF

PIC32MZ1024ECM100-I/PF - 200MHz 1MB Flash MCU | Microchip

The Microchip Technology PIC32MZ1024ECM100-I/PF is a 32-bit RISC Flash microcontroller from the PIC32MZ Embedded Connectivity (EC) family, featuring the MIPS32 microAptiv core running at 200 MHz with 330 DMIPS throughput. It integrates 1024 KB (1 MB) of Flash program memory and 512 KB of data RAM in a 100-pin TQFP (14x14 mm) package, with a -40C to +85C industrial operating range. A 32-bit microcontroller (MCU) is an integrated computing subsystem built around a 32-bit CPU core, on-chip Flash for code storage, SRAM for runtime data, and a rich set of peripherals such as ADC, timers, and communication interfaces. Within the taxonomy of semiconductors, this places the part under MCU -> microcontroller -> embedded processor -> integrated circuit. The PIC32MZ EC family is optimized for high-performance connected applications that demand Ethernet, USB, and CAN connectivity alongside a deterministic DSP-enhanced engine. Key differentiating features of the PIC32MZ1024ECM100-I/PF include the DSP-enhanced microAptiv core with four 64-bit accumulators, single-cycle MAC, saturating and fractional math, microMIPS mode for up to 35% code compression, a 10-bit 500 KSPS 40-channel ADC module, dual-panel Flash for live update support, an integrated Memory Management Unit for embedded OS execution, plus hardware crypto accelerators. Communication peripherals cover CAN, UART, I2C, PMP, EBI, SQI, analog comparators, and SPI/I2S audio interfaces. Architecturally, the device pairs a Harvard bus microAptiv core with tightly-coupled SRAM and a 128-bit-wide Flash bus to sustain instruction throughput at 200 MHz. The included crypto engine (CA), Ethernet MAC, and USB HS/FS PHYs provide wired connectivity without external companion chips, while dual-panel Flash enables firmware field updates without downtime - critical for industrial IoT and gateway designs. Typical applications include industrial Ethernet gateways, IoT edge nodes with TLS acceleration, automotive body controllers, HMI panels with audio playback, and medical instrumentation requiring deterministic real-time DSP. The wide peripheral mix also suits motor control and graphics user-interface tasks when paired with an external TFT controller. When designing with this part, allocate a 4-layer PCB and dedicate solid ground planes under the analog AVSS pins to achieve the datasheet ADC SNR; verify that 1.8V core decoupling uses a 1uF X7R within 2 mm of the VCAP pin to avoid Vcore droop under heavy DMA load. Note: per Microchip, this family is not recommended for new designs - the PIC32MZ EF family with FPU is the preferred migration. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet, providing a faster engineering decision workflow than distributor catalog pages.

USD $6.65 有现货
PIC32MZ1024ECM100-I/PT - 200MHz 32-bit MCU 1MB Flash | Microchip
PIC32MZ1024ECM100-I/PT

PIC32MZ1024ECM100-I/PT - 200MHz 32-bit MCU 1MB Flash | Microchip

The Microchip Technology PIC32MZ1024ECM100-I/PT is a high-performance 32-bit MIPS microAptiv-based microcontroller IC running up to 200 MHz (330 DMIPS), featuring 1 MB of Flash and 256 KB of SRAM in a 100-pin TQFP (12x12 mm) package. A microcontroller (MCU) is a single-chip computer that integrates a CPU core, memory (Flash for code, SRAM for data), and a rich set of peripherals (ADC, timers, communication interfaces) into one package. The PIC32MZ family sits at the top of Microchip's PIC32 line, targeting embedded connectivity applications that require deterministic real-time performance, large code storage, and high-throughput interfaces such as Ethernet, CAN, USB, and SQI. Within the broader taxonomy, the PIC32MZ1024ECM100 belongs to the EC (Embedded Connectivity) sub-family — positioned between the lower-pin-count PIC32MX series and the higher-performance PIC32MZ EF family that adds a hardware Floating Point Unit. Key features include a 200 MHz / 330 DMIPS MIPS32 microAptiv core with DSP enhancements (four 64-bit accumulators, single-cycle MAC, saturating and fractional math), microMIPS mode for up to 35% code compression, dual-panel Flash for live update support, a 10-bit 500 KSPS 40-channel ADC module, a Memory Management Unit (MMU) for OS execution, and integrated peripherals including CAN, UART, I2C, PMP, EBI, SQI, and analog comparators. SPI/I2S interfaces are also provided for audio connectivity. Architecturally, the device combines a 5-stage pipeline microAptiv core with tightly-coupled SRAM and a multi-channel DMA engine, enabling efficient data movement for peripherals such as Ethernet and SQI without CPU intervention. The dual-panel Flash allows the application to perform live firmware updates by writing to one panel while executing from the other — a critical feature for connected IoT and industrial nodes that cannot tolerate downtime. Typical applications include industrial Ethernet nodes, CAN-connected motor control, secure connected gateways, USB audio devices, and human-machine interface (HMI) controllers. The wide peripheral mix also suits smart-energy metering and building automation. When designing in this part, allocate the 100-pin TQFP footprint with sufficient decoupling (100 nF per supply pair plus a bulk capacitor) and reserve the ICSP pair PGECx/PGEDx for in-circuit programming. For new designs that require an FPU or higher clock rates, consider migrating to the PIC32MZ EF family. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet.

USD $7.45 有现货
PIC32MZ1024ECM100T-I/PF - 200MHz 32-bit MCU 1MB Flash | Microchip
PIC32MZ1024ECM100T-I/PF

PIC32MZ1024ECM100T-I/PF - 200MHz 32-bit MCU 1MB Flash | Microchip

The Microchip Technology PIC32MZ1024ECM100T-I/PF is a high-performance 32-bit microcontroller from the PIC32MZ family, featuring the MIPS32 microAptiv core running at 200 MHz with 330 DMIPS performance. It integrates 1 MB (1024 KB) of flash program memory and 524 KB of SRAM in a 100-pin TQFP package (14x14 mm), supporting industrial-grade operation (-40C to +85C). The 'T' suffix denotes tape-and-reel packaging and the 'I' suffix indicates the industrial temperature range. A 32-bit MCU (microcontroller unit) is a single-chip computer that integrates a processor core, memory, and configurable peripherals. The PIC32MZ family is Microchip's flagship 32-bit line based on the MIPS microAptiv architecture, sitting within the broader hierarchy of microcontroller -> embedded controller -> semiconductor. These devices bridge the gap between 8/16-bit MCUs and application processors, providing deterministic real-time control with ample throughput for connected and graphics-rich applications. Key features of this device include hardware crypto engine, dual-panel flash for live update, 10-bit 500 KSPS 40-channel ADC, memory management unit (MMU) for RTOS support, microMIPS mode for up to 35% code compression, and a comprehensive peripheral set including Ethernet, CAN, UART, I2C, SPI/I2S, PMP, EBI, and SQI interfaces. The integrated FPU and DSP extensions (four 64-bit accumulators, single-cycle MAC, saturating and fractional math) accelerate signal-processing workloads. The microAptiv core with its 5-stage pipeline, branch predictor, and tightly-coupled SRAM delivers deterministic interrupt latency while sustaining high throughput. The hardware crypto engine and true random number generator support secure boot, TLS, and IPsec acceleration, making the part attractive for connected industrial gateways and IoT edge nodes. With 1 MB flash and 524 KB RAM, the device can host a full embedded OS plus application firmware. Typical applications include industrial automation controllers, Ethernet-connected IoT gateways, automotive infotainment/HMI prototypes, secure point-of-sale terminals, motor control and digital power conversion, medical instrumentation requiring CAN connectivity, and graphical HMI panels with TFT displays. The wide peripheral set also suits robotics, building automation, and remote sensor nodes. When designing with this MCU, allocate the lower 512 KB of flash for the bootloader (leveraging dual-panel live update) and reserve the upper 512 KB for the application image. Decouple all VDD/VSS pairs with 100 nF ceramics as close to the pins as possible, and route the 50 MHz Ethernet reference clock with controlled impedance. Refer to the Microchip PIC32MZ EC Family datasheet and the Harmony 3 framework for software support. This page synthesizes distributor pricing, verified drop-in alternatives, and practical design notes for engineers evaluating the PIC32MZ1024ECM100T-I/PF, complementing the manufacturer datasheet with cross-package context and lifecycle information not always surfaced on distributor listings.

USD $11.28 有现货
PIC32MZ1024ECM100T-I/PT - 200MHz 32-bit MCU 1MB Flash TQFP-100 | Microchip
PIC32MZ1024ECM100T-I/PT

PIC32MZ1024ECM100T-I/PT - 200MHz 32-bit MCU 1MB Flash TQFP-100 | Microchip

The Microchip Technology PIC32MZ1024ECM100T-I/PT is a high-performance 32-bit microcontroller based on the MIPS32 microAptiv core, running at up to 200 MHz with 330 DMIPS throughput, integrating 1 MB of Flash and 256 KB of SRAM into a 100-pin TQFP (12x12 mm, 0.4 mm pitch) package. According to the Microchip product page, the device features four 64-bit accumulators, single-cycle MAC with saturating and fractional math, microMIPS mode for up to 35% code compression, dual-panel Flash for live update support, and a Memory Management Unit (MMU) for embedded OS execution. A 32-bit microcontroller (MCU) is a single-chip computer that integrates a 32-bit CPU core, volatile and non-volatile memory, and programmable peripherals on a single silicon die. The PIC32MZ family belongs to the broader category of embedded microcontrollers within the semiconductor hierarchy: MCU -> embedded processor -> microprocessor -> semiconductor IC. microAptiv cores combine compact code density with DSP extensions, placing the PIC32MZ EC family above simple Cortex-M0/M0+ parts but below Cortex-M7 in raw signal-processing capability. Key features of the PIC32MZ1024ECM100T-I/PT include a 10-bit 500 KSPS 40-channel ADC, CAN, UART, I2C, PMP, EBI, SQI, analog comparators, and SPI/I2S interfaces. The on-chip crypto engine and integrated Ethernet MAC make the EC variant differentiated for connected industrial designs, while dual-panel Flash enables firmware Live Update without downtime. The microAptiv pipeline supports both MIPS32 and compressed microMIPS instruction modes, allowing a C compiler to trade code size for throughput. An MMU provides full virtual-memory support for embedded Linux or RTOS environments, while the 16 KB instruction cache and 4 KB data cache accelerate tight DSP loops such as audio and motor-control algorithms. Typical applications include industrial Ethernet gateways, building automation controllers, CAN-connected automotive body and chassis ECUs, audio processing with I2S codecs, and graphical HMI front panels driving LCD or TFT displays via the parallel master port (PMP). Design with this device by budgeting 100-pin GPIO carefully - the EC variant consumes roughly 30 pins for Ethernet, USB, and high-speed serial interfaces, leaving 70+ for user I/O. Use decoupling per Microchip AN583 - one 100 nF X7R per VDD pin, plus a single 4.7 uF bulk near the regulator. This page synthesizes distributor pricing, drop-in PIC32MZ EC family alternates, and practical design notes that complement the manufacturer datasheet with practical cross-referencing and BOM-decision guidance.

USD $9.55 有现货
PIC32MZ1024ECM124-I/TL - 32-bit 200MHz MCU 1MB Flash | Microchip
PIC32MZ1024ECM124-I/TL

PIC32MZ1024ECM124-I/TL - 32-bit 200MHz MCU 1MB Flash | Microchip

The Microchip Technology PIC32MZ1024ECM124-I/TL is a 32-bit MIPS32 microAptiv PIC microcontroller delivering 200 MHz core performance with 1 MB of Flash program memory and 512 KB of SRAM, packaged in a 124-pin VTLA (9x9 mm) surface-mount module. The part integrates HS USB, 10/100 Ethernet MAC, dual-panel live-update Flash, and an advanced analog block including a 12-bit ADC at up to 2 MSPS, making it one of the highest-performance general-purpose members of the PIC32MZ Embedded Connectivity (EC) family. A 32-bit microcontroller is an integrated circuit that combines a CPU core, program memory, data memory, and a rich set of peripherals (timers, communication interfaces, ADCs, DACs, and I/O) on a single die. The PIC32MZ family belongs to the broader category of MIPS-based microcontrollers, which sit hierarchically inside RISC microcontrollers -> microcontrollers -> embedded processors -> semiconductors. PIC32MZ EC devices specifically target connectivity-rich IoT, audio, graphics, and industrial HMI applications. The PIC32MZ1024ECM124 features 330 DMIPS / 3.28 CoreMark/MHz performance, dual-panel Flash allowing live firmware updates without downtime, hardware crypto accelerators and a true random number generator for security, an integrated 50 MHz reference clock for USB and Ethernet, and a comprehensive pin/feature remapping peripheral pin select (PPS) subsystem. The 124-pin VTLA package exposes up to 98 I/O pins, multiple UART/SPI/I2C instances, and parallel display/graphics interfaces. Architecturally, the part combines a 5-stage MIPS32 microAptiv core with tightly coupled instruction and data prefetch buffers, an 8-channel DMA controller, a dedicated crypto engine, and dual Flash banks for background programming. Power management includes multiple low-power modes, an on-chip LDO, and selectable peripheral clock gating. The 'EC' designation indicates the Embedded Connectivity variant with the strongest communications peripheral set in the PIC32MZ line. Typical applications include industrial IoT gateways with Ethernet and Wi-Fi co-processor interfaces, USB host/device embedded products, multi-protocol industrial controllers (Modbus, EtherCAT slave bridges), secure connected appliances, graphical HMI touch panels, and audio playback systems using the on-chip I2S/音频 codec interfaces. The 1 MB dual-panel Flash supports OTA firmware upgrades. When designing with this part, allocate sufficient decoupling (100 nF + 4.7 µF per VDD/VDDIOX pin pair), keep trace lengths matched for USB differential pairs, and use MPLAB Harmony v3 for code generation. Note that the master clock requires an external crystal or oscillator; the integrated 50 MHz reference cannot replace the primary system oscillator. The 9x9 mm VTLA has an exposed thermal pad that must be soldered to a continuous ground pour for thermal and electrical performance. This page synthesizes distributor pricing, drop-in alternatives from the PIC32MZ family, recommended companion parts for typical applications, and practical design notes that go beyond the manufacturer datasheet excerpt.

USD $7.85 有现货
PIC32MZ1024ECM124T-I/TL - 200MHz 32-bit MCU 1MB Flash | Microchip
PIC32MZ1024ECM124T-I/TL

PIC32MZ1024ECM124T-I/TL - 200MHz 32-bit MCU 1MB Flash | Microchip

The Microchip Technology PIC32MZ1024ECM124T-I/TL is a high-performance 32-bit MIPS32 microAptiv microcontroller from the PIC32MZ EC (Embedded Connectivity) family, operating at up to 200 MHz and delivering 330 DMIPS and 3.28 CoreMark/MHz. It integrates 1 MB (1024 KB) of dual-panel live-update Flash and 512 KB of SRAM in a 124-pin VTLA (9x9 mm, 0.9 mm height) surface-mount package. A 32-bit microcontroller (MCU) is an embedded processor that executes instructions over a 32-bit data path, enabling higher code density, larger addressable memory, and richer peripheral integration than 8-bit or 16-bit MCUs. Within the broader taxonomy, this PIC32MZ1024ECM124 sits inside the microcontroller class of embedded processors, which itself belongs to the semiconductor integrated circuit (IC) family and is used for real-time control, connectivity, and human-machine interface (HMI) subsystems. The EC suffix denotes the Embedded Connectivity sub-family, which adds Ethernet, USB, CAN, and crypto accelerators optimized for connected industrial and IoT designs. Key features of the PIC32MZ1024ECM124T-I/TL include a MIPS32 microAptiv core with hardware multiply/divide, 16 KB I-cache and 4 KB D-cache, a 12-bit 18 MSPS ADC with up to 48 analog inputs, dual CAN 2.0b controllers, 10/100 Ethernet MAC with MII/RMII interface, USB 2.0 high-speed OTG, a hardware crypto engine (AES, 3DES, SHA, MD5, RNG), and multiple UART, SPI, I2C, and I2S peripherals. The part also integrates a 9-channel DMA controller and supports up to 97 programmable I/O lines, with industrial-grade -40C to +85C operation (I temperature grade). The architecture combines a 5-stage pipeline MIPS core with tightly-coupled SRAM and dual-bank Flash for live firmware updates. The on-chip crypto and connectivity peripherals offload networking stacks and TLS/SSL handshakes from the CPU, freeing cycles for application logic. Compared with the older PIC32MX series, the PIC32MZ EC family offers roughly 4x the CoreMark/MHz and a substantially richer connectivity peripheral set, while sharing the MPLAB X IDE and Harmony framework toolchain for code reuse. Typical applications include industrial Ethernet gateways, secure connected sensors, building-automation controllers, USB-CAN bridges, and embedded HMI panels. The wide peripheral mix also suits motor-control front-ends, point-of-sale terminals, and connected medical instrumentation where deterministic real-time response is required. When designing with this part, follow the VTLA 9x9 mm PCB land pattern, route the Ethernet MII/RMII traces as impedance-controlled 50 ohm differential pairs, and provide bulk + bypass capacitors close to every supply pin. Always validate crypto library versions against the latest MPLAB Harmony release for FIPS-relevant builds. This page synthesizes distributor pricing, drop-in same-package alternatives, and practical PCB layout notes not found in the manufacturer datasheet alone.

USD $8.40 有现货
PIC32MZ1024ECM144-I/PH - 200MHz MCU 1MB Flash 144-TQFP | Microchip
PIC32MZ1024ECM144-I/PH

PIC32MZ1024ECM144-I/PH - 200MHz MCU 1MB Flash 144-TQFP | Microchip

The Microchip Technology PIC32MZ1024ECM144-I/PH is a high-performance 32-bit MIPS32 microAptiv core microcontroller running at 200 MHz (330 DMIPS, 3.28 CoreMark/MHz) with 1 MB Flash and 512 KB SRAM in a 144-pin TQFP (PH) 16x16 mm package. It integrates dual-panel live-update Flash, four 64-bit accumulators, single-cycle MAC with saturating and fractional math, microMIPS mode for up to 35% code compression, and a memory Management Unit (MMU) for embedded OS execution. A 32-bit microcontroller (MCU) is an integrated circuit containing a high-performance processor core, program memory (Flash), data memory (SRAM), and a rich set of peripherals including ADCs, timers, communication interfaces, and GPIO. The PIC32 family belongs to the MIPS32 architecture lineage and sits within Microchip's portfolio of MCU -> embedded controller -> microcontroller -> semiconductor device taxonomy, targeting demanding real-time and DSP-oriented embedded applications. Key features of this device include a 10-bit 500 KSPS 48-channel ADC module, 200 MHz CPU clock, 1 MB dual-bank Flash for live firmware update, 512 KB SRAM, and connectivity peripherals including CAN, UART, I2C, PMP, EBI, SQI, analog comparators, and SPI/I2S audio interfaces. The crypto accelerator and Ethernet MAC make it suitable for connected secure nodes. The microAptiv core architecture combines a 5-stage pipeline with DSP extensions, hardware multiply-accumulate, and dedicated DSP registers, enabling efficient audio decoding, motor-control loops, and signal-processing tasks. The integrated MMU supports full operating systems such as Linux or RTOS kernels like FreeRTOS and Micrium OS, while the dual-panel Flash architecture enables fail-safe firmware updates without system downtime. Typical applications include industrial automation controllers, IoT edge gateways, automotive body/comfort modules, graphics HMI terminals, motor control inverters, audio processing products, and Ethernet-connected secure devices requiring hardware cryptography. The 144-pin package provides ample GPIO for multi-bus applications. Designers should provide a low-noise 3.3V LDO for the AVDD rail, route analog and digital grounds separately, and follow Microchip's PCB layout recommendations for oscillator placement. This page synthesizes distributor pricing, same-family drop-in alternatives, and practical design notes not found in the manufacturer datasheet.

USD $8.95 有现货
PIC32MZ1024ECM144T-I/PL - 200MHz 32-bit MCU 1MB Flash 144-LQFP | Microchip
PIC32MZ1024ECM144T-I/PL

PIC32MZ1024ECM144T-I/PL - 200MHz 32-bit MCU 1MB Flash 144-LQFP | Microchip

The Microchip Technology PIC32MZ1024ECM144T-I/PL is a high-performance 32-bit microcontroller from the PIC32MZ Embedded Connectivity (EC) family, built on the MIPS32 microAptiv core with DSP enhancements and dual-panel Flash for live-update support. It runs at 200 MHz delivering 330 DMIPS, integrates 1 MB of Flash and 512 KB of SRAM, and is housed in a 144-pin LQFP package (20x20 mm) with industrial-grade -40C to +85C operating range. The "T" suffix indicates Tape & Reel packaging; the "I" indicates industrial temperature grade. A microcontroller (MCU) is a single-chip computer containing a CPU core, program and data memory, plus a rich set of programmable peripherals. The PIC32MZ EC family belongs to the broader hierarchy: 32-bit MCU -> embedded microcontroller -> microcontroller -> semiconductor IC. The microAptiv core adds single-cycle MAC with four 64-bit accumulators, saturating and fractional math, microMIPS mode for up to 35% code compression, and a Memory Management Unit for embedded OS execution. The Floating Point Unit (FPU) and crypto engine are NOT included in the EC variant - they appear in the EF family. Key features include 1 MB Flash, 512 KB SRAM, a 10-bit 500 KSPS 48-channel ADC, dual-panel Flash for live firmware update, CAN, six UARTs, I2C, SPI/I2S, PMP, EBI, SQI interfaces, Ethernet MAC, and analog comparators. The integrated crypto accelerator and hardware RNG provide secure boot and encrypted communication suitable for IoT gateways. The 144-LQFP offers generous I/O with multiple remappable peripherals to ease PCB routing. Wide 3.0V to 3.6V core voltage is supplied through a single 3.3V rail typical of modern embedded designs. Typical applications include industrial IoT gateways, EtherCAT or CAN-FD node controllers, Ethernet-connected HMI panels, motor control with FOC algorithms, and secure POS terminals. Industrial-grade silicon supports factory-floor deployments, and the dual-panel Flash enables field firmware updates without service interruption. The 200 MHz core plus DSP extensions accelerate control-loop math (PID, FOC) and audio codec processing in embedded designs. When designing with this device, allocate a 4-layer PCB with solid ground planes for the analog section, place a 12 MHz crystal within 5 mm of the OSCI/OSCO pins, and provision decoupling of one 100 nF + one 4.7 uF per VDD pin. Note that the EC family is NOT recommended for new designs - Microchip directs customers to the EF (FPU + crypto) family for new projects.

USD $8.71 有现货
PIC32MZ1024EFE064-I/MR - 200MHz 32-bit MCU 1MB Flash | Microchip
PIC32MZ1024EFE064-I/MR

PIC32MZ1024EFE064-I/MR - 200MHz 32-bit MCU 1MB Flash | Microchip

The Microchip Technology PIC32MZ1024EFE064-I/MR is a high-performance 32-bit MIPS microcontroller from the PIC32MZ EF family, featuring a MIPS32 M-Class Warrior core running up to 200 MHz (252 MHz on related family members) with 1 MB of Flash and 256 KB of SRAM, housed in a 64-pin QFN (MR) 9x9 mm package. This 'EFE' variant excludes the crypto accelerator and CAN module, while still retaining high-speed USB, Ethernet, advanced analog, audio and graphics peripherals. A PIC32MZ EF microcontroller is a 32-bit MIPS-based MCU designed for embedded connectivity applications requiring high computational throughput, large memory and rich peripheral integration. Within Microchip's broader hierarchy it sits as an MCU -> 32-bit MCU -> PIC32 family -> PIC32MZ EF sub-family -> connectivity-class device, targeting industrial, automotive, IoT, HMI/graphics and motor-control segments. Key features of this part include 200 MHz / 330 DMIPS core performance, IEEE 754 hardware floating-point unit, DSP extensions with four 64-bit accumulators and single-cycle MAC, dual-panel Flash supporting live update, a 12-bit 5 Msps analog-to-digital converter with up to 48 channels, two 12-bit DACs, four analog comparators, Hi-Speed USB 2.0 device/host/OTG, 10/100 Ethernet MAC, and multiple UART/SPI/I2C/CAN-FD (in G-variants) interfaces. The 64-QFN package exposes 53 I/O pins and a low-pin-count variant footprint for compact designs. Architecturally the device pairs the Warrior M-class core with multi-channel DMA, a high-bandwidth SRAM matrix, a dedicated crypto/hash engine (disabled on this 'EFE' variant), and a flexible peripheral pin-select system. The integrated FPU removes the need for software floating-point emulation in compute-intensive loops, while the dual-panel Flash arrangement lets firmware load an alternate image during runtime upgrades, critical for unattended industrial and IoT deployments. Typical applications include industrial HMI touch panels, IoT edge nodes with Ethernet/USB connectivity, audio processing equipment using I2S and DSP, motor-control FOC drives, industrial IoT bridges, and graphics-capable medical or test instruments. The 1 MB Flash and 256 KB SRAM allow full TCP/IP stacks plus application code on-chip. When designing with this device, verify that your supply budget tolerates the 200 MHz active current and use a 4-layer PCB with a solid ground plane for EMI performance. The MR (QFN) package requires careful thermal relief because all power is dissipated through the exposed pad and bond wires. This page synthesizes verified distributor pricing, drop-in same-package alternatives, and practical design notes not found in the manufacturer datasheet alone.

USD $5.30 有现货
PIC32MZ1024EFE064-I/PT - 32-bit MCU 252MHz 1MB Flash | Microchip
PIC32MZ1024EFE064-I/PT

PIC32MZ1024EFE064-I/PT - 32-bit MCU 252MHz 1MB Flash | Microchip

The Microchip Technology PIC32MZ1024EFE064-I/PT is a high-performance 32-bit MIPS microcontroller from the PIC32MZ EF family, running up to 252 MHz with 330 DMIPS, equipped with 1 MB Flash and 256 KB SRAM, and housed in a 64-pin TQFP (10x10 mm) package. It integrates an FPU, DSP enhancements with four 64-bit accumulators, IEEE 754-compliant single- and double-precision math, and single-cycle MAC, saturating and fractional arithmetic. An MCU (Microcontroller Unit) is a single-chip computer containing a processor core, program memory (Flash), data memory (SRAM), and a rich set of peripherals. The PIC32MZ EF family is positioned in the hierarchy as: MIPS MCU -> 32-bit MCU -> microcontroller -> embedded processor -> semiconductor. EF variants specifically target connectivity, graphics (HMI), and motor control, bridging the gap between traditional PIC MCUs and high-end application processors. Key features include dual-panel Flash for live-update firmware support (allowing in-field firmware swap without downtime), Hi-Speed USB 2.0 with PHY, 10/100 Ethernet MAC, up to four SPI/I2S interfaces, two I2C buses, six UART channels, 12-bit ADC at 500 ksps, and a parallel master port for graphics displays. The IC operates from 2.3V to 3.6V and supports an industrial temperature range of -40C to +85C. The device uses a 5-stage pipeline MIPS Warrior M-class core with DSP extensions, enabling deterministic real-time response while running protocols like TCP/IP, USB, and graphics stacks simultaneously. The 200 MHz core delivers 3.28 CoreMark/MHz performance, making it competitive with Cortex-M4 class devices while offering integrated Ethernet and HS-USB that often require external PHYs on competing parts. Typical applications include industrial IoT gateways with Ethernet, HMI panels with TFT displays, USB audio interfaces, motor control drives with field-oriented control, and connected medical instrumentation. The 1 MB dual-bank Flash supports OTA firmware updates by running from one panel while writing the other. When designing with this part, allocate a 4-layer stack with continuous ground plane beneath the TQFP footprint to control EMI from the 252 MHz core. Decouple VDD/VUSB/VCAP/AVDD with 100 nF X7R at every supply pin within 2 mm trace length. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet.

USD $6.20 有现货
PIC32MZ1024EFE064T-I/MR - 200MHz 32-bit MCU, 1MB Flash, 64-QFN
PIC32MZ1024EFE064T-I/MR

PIC32MZ1024EFE064T-I/MR - 200MHz 32-bit MCU, 1MB Flash, 64-QFN

The Microchip Technology PIC32MZ1024EFE064T-I/MR is a high-performance 32-bit MIPS32 M-Class microcontroller running at up to 200 MHz with 1 MB of Flash and 256 KB of SRAM, housed in a 64-pin QFN (9x9 mm) package. It features the MIPS microAptiv core with FPU and is part of the PIC32MZ EF family targeting connectivity, industrial, automotive, IoT, graphics (HMI), and motor control applications. Key differentiating features include HS USB, Ethernet MAC, SQI (Serial Quad Interface), a 12-bit ADC module with up to 24 channels, and a Crypto engine exclusion variant ("No Crypto"). A 32-bit MCU (microcontroller unit) is a single-chip computer that integrates a high-performance processor core, program and data memory, and a rich set of peripherals. Within the broader taxonomy, 32-bit MCUs sit between 8/16-bit microcontrollers and microprocessor units (MPUs); they offer near-MPU computational performance while retaining real-time deterministic interrupt response. The PIC32MZ EF family specifically adds DSP extensions, an FPU, and a wide peripheral set, positioning it between traditional Cortex-M4 class MCUs and application processors. The PIC32MZ1024EFE064T-I/MR integrates HS USB 2.0 OTG, 10/100 Ethernet MAC with MII/RMII, CAN 2.0B, multiple UART/SPI/I2C, a 12-bit 5 MSPS ADC with up to 24 channels, and dedicated DMA channels for offloading CPU data movement. The device supports Live-Update Flash (allowing firmware updates without downtime), hardware crypto acceleration variants (this "No Crypto" MPN omits it), and a rich graphics interface for HMI panels. Architecturally, the device pairs the MIPS microAptiv core with 16 KB I-cache and 4 KB D-cache, a memory protection unit, and a high-speed system bus fabric that feeds peripherals from separate DMA channels. The 200 MHz core delivers 252 DMIPS / 3.28 CoreMark/MHz, and the dual-panel Flash architecture enables robust field updates. Typical applications include industrial Ethernet gateways, automotive HMI clusters, IoT edge nodes with USB or Ethernet, motor control drives, and high-resolution graphics HMI panels. Design considerations for this part include careful power-decoupling network design around the 64-QFN exposed pad for the high-speed ADC, and adequate bulk capacitance for the HS USB and Ethernet PHYs operating simultaneously. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the standalone datasheet.

USD $9.85 有现货
PIC32MZ1024EFE064T-I/PT - 200MHz 32-bit MCU 1MB Flash | Microchip
PIC32MZ1024EFE064T-I/PT

PIC32MZ1024EFE064T-I/PT - 200MHz 32-bit MCU 1MB Flash | Microchip

The Microchip Technology PIC32MZ1024EFE064T-I/PT is a 32-bit MIPS32 M-Class microcontroller from the PIC32MZ EF family running at 200 MHz with 1 MB (1M x 8) of Flash program memory and 256 KB SRAM, housed in a 64-pin TQFP (10x10 mm) package. The device integrates a hardware Floating Point Unit (FPU), DSP-enhanced MIPS Warrior M-class core with four 64-bit accumulators and single-cycle MAC, and an IEEE 754-compliant floating point pipeline for high-performance numeric work. A 32-bit microcontroller (MCU) is an embedded processor that fetches, decodes, and executes 32-bit instructions in a single instruction stream, sitting in the broader hierarchy of microcontroller -> embedded processor -> semiconductor IC. The PIC32MZ EF family specifically targets graphics/HMI, audio processing, motor control, and industrial connectivity workloads where deterministic performance, large code footprints, and rich connectivity peripherals are mandatory. Key features include 200 MHz / 330 DMIPS core performance, dual-panel Flash supporting live update (run-time firmware swap without downtime), high-Speed USB 2.0 (HS USB), 10/100 Ethernet MAC, dedicated audio and graphics peripherals, and an advanced analog subsystem with 12-bit ADC and configurable op-amps. The 64-pin TQFP exposes up to 53 general-purpose I/O pins with multiple 5V-tolerant inputs. Architecturally the device uses a 5-stage pipeline, dual-bank Flash that allows the application to switch between firmware images in field without an external bootloader, and a peripheral bus that decouples high-bandwidth peripherals (Ethernet, USB, graphics LCD) from the system bus. Peripherals include up to six UART/SCI, three SPI, two I2C, parallel graphics port, and 16-bit timers. Typical applications include industrial HMI panels with TFT LCD, audio equipment with USB streaming, IoT gateways using Ethernet + HS USB, and motor control boards with DSP-style signal processing. When laying out a board, route the Ethernet differential pair with controlled impedance and place the 24 MHz crystal within 1 cm of the OSC pins to keep the USB HS PHY reference clean.

USD $9.85 有现货
PIC32MZ1024EFE100-E/GJX - 200MHz 1MB Flash MCU | Microchip
PIC32MZ1024EFE100-E/GJX

PIC32MZ1024EFE100-E/GJX - 200MHz 1MB Flash MCU | Microchip

The Microchip PIC32MZ1024EFE100-E/GJX is a 32-bit MIPS32 M-Class microcontroller running up to 200 MHz (252 MHz family maximum) with 1 MB of Flash and 256 KB of SRAM, housed in a 100-pin TFBGA (7x7 mm) package designed for industrial and automotive-grade connectivity applications. A microcontroller (MCU) is a single-chip computer that integrates a CPU core, memory, and programmable peripherals. The PIC32MZ EF family belongs to the broader MIPS32 architecture lineage, now part of Microchip's portfolio, and targets high-performance embedded connectivity. Within Microchip's taxonomy, this part sits at Microcontroller > 32-bit MCU > PIC32 > PIC32MZ EF family. Synonyms in the field include MCU, embedded controller, and host processor. The EF family is distinguished by an integrated FPU and DSP-enhanced core with four 64-bit accumulators, single-cycle MAC, saturating and fractional math. Key features of the PIC32MZ1024EFE100-E/GJX include 200 MHz CPU operation with 330 DMIPS, 1 MB dual-panel Live-Update Flash enabling in-field firmware upgrades without downtime, 256 KB SRAM (vs 512 KB on the top-tier EF devices), and HS USB, Ethernet, CAN, and multiple serial interfaces. The device integrates 12-bit ADC modules, analog comparators, and a graphics-compatible parallel master port for HMI applications. The 100-TFBGA package at 7x7 mm provides high-density I/O for designs requiring extensive connectivity. Architecturally, the device uses the MIPS Warrior M-class core with IEEE 754-compliant FPU. Dual-panel Flash allows firmware to run from one panel while the other is being reprogrammed, enabling fail-safe Live-Update firmware upgrades. The part is AEC-Q100 qualified, supporting automotive operating temperature range -40C to +125C (the 'E' suffix denotes -40C to +125C extended temperature). Typical applications include industrial IoT gateways, automotive body and infotainment controllers, HMI/graphical displays, motor control drives, and connected sensor hubs. The combination of large Flash, Ethernet, and HS USB makes it a strong fit for connected industrial equipment requiring secure, field-upgradable firmware. When designing with this part, ensure adequate decoupling on all VDD/VSS pairs (typically 100 nF ceramic per pair) and route the HS USB differential pair with 90 ohm differential impedance. Plan Flash bank selection in software to leverage the Live-Update feature, which requires reserving one panel as the backup image. This page synthesizes distributor pricing from DigiKey, Mouser, and LCSC, parametric drop-in alternatives within the PIC32MZ EF family, and practical design notes beyond the manufacturer datasheet.

USD $5.38 有现货
PIC32MZ1024EFE100-I/GJX - 200MHz 32-bit MCU 1MB Flash 100-TFBGA | Microchip
PIC32MZ1024EFE100-I/GJX

PIC32MZ1024EFE100-I/GJX - 200MHz 32-bit MCU 1MB Flash 100-TFBGA | Microchip

The Microchip Technology PIC32MZ1024EFE100-I/GJX is a high-performance 32-bit microcontroller from the PIC32MZ Embedded Connectivity with Floating Point Unit (EF) family, featuring a MIPS32 M-Class Warrior core running at up to 200 MHz (the family supports up to 252 MHz on some variants) with 330 DMIPS and an IEEE 754-compliant hardware FPU. The device integrates 1 MB of Flash with Dual Panel support for live update and 256 KB of SRAM, packaged in a 100-ball Thin-profile Fine-pitch Ball Grid Array (TFBGA, 7x7 mm) for compact, high-density board designs. It targets connectivity-rich industrial, IoT, HMI/graphics, and motor-control applications. A 32-bit MCU is a microcontroller whose data path, registers, and arithmetic logic unit operate on 32 bits at a time, enabling higher code density, larger addressable memory, and richer data processing than 8/16-bit alternatives. The PIC32MZ EF family sits in the high-performance tier of Microchip's 32-bit portfolio, between the lower-cost PIC32MX and the higher-end PIC32MZ EC families. Built around the MIPS Warrior M-class architecture, it adds DSP extensions (four 64-bit accumulators, single-cycle MAC, saturating and fractional math) and a single-precision FPU, allowing sensor fusion, motor-control math, and graphics rendering to run on-chip without an external DSP. Key features of the PIC32MZ1024EFE100 include high-speed connectivity peripherals (USB, Ethernet, CAN, multiple UART/SPI/I2C), a 12-bit ADC up to 2 Msps, dedicated motor-control PWM, and cryptographic accelerators on select derivatives. The F variant specifically excludes the Crypto module, making this 'EFE' SKU a no-crypto, no-CAN part per Mouser's listing, which simplifies BOM for designers who do not need those blocks. The Dual Panel Flash enables live firmware updates without halting the application, critical for industrial IoT and remote devices. Typical applications include industrial IoT gateways, HMI panels and graphics, BLDC and PMSM motor drives, audio processing front-ends, and connected consumer devices. The wide operating temperature range and 1 MB code space support field-updatable, safety-conscious firmware. When designing with this part, ensure the PCB land pattern matches the 100-TFBGA 7x7 mm geometry, allocate decoupling per the family reference manual, and use MPLAB Harmony 3 for peripheral driver support.

USD $2.78 有现货
PIC32MZ1024EFE100-I/PF - 200MHz 1MB Flash 100-TQFP MCU | Microchip
PIC32MZ1024EFE100-I/PF

PIC32MZ1024EFE100-I/PF - 200MHz 1MB Flash 100-TQFP MCU | Microchip

The Microchip PIC32MZ1024EFE100-I/PF is a high-performance 32-bit MIPS M-Class microcontroller in the PIC32MZ EF family, running up to 200 MHz with 1 MB Flash and 256 KB SRAM, housed in a 100-pin TQFP (14x14 mm) package. It integrates a MIPS32 M-Class Warrior core with a single-precision IEEE 754 FPU, DSP extensions with four 64-bit accumulators and single-cycle MAC, plus a 12-bit 18-channel ADC, high-speed USB 2.0 (480 Mbps) with integrated PHY, 10/100 Ethernet MAC, dedicated audio I²S/SSC interfaces, parallel graphics port, and multiple CAN, UART, SPI, and I²C peripherals. The device is rated for the industrial -40C to +85C temperature grade. An MCU is a microcontroller unit, a single-chip computer containing a processor core, memory and peripherals. PIC32MZ EF devices sit at the top of Microchip's 32-bit MCU family, bridging embedded connectivity, graphics HMI and motor-control workloads. They use a dual-panel Flash architecture that supports live-update firmware swaps without downtime, an important feature for industrial gateways and IoT edge nodes that must remain reachable during OTA upgrades. Key features include 200 MHz / 330 DMIPS core performance, dual-panel live-update Flash, hardware crypto accelerators on crypto variants, 1 MB Flash and 256 KB SRAM in this -I/PF part, HS USB 2.0 with on-chip PHY, 10/100 Ethernet MAC, two CAN modules, and a parallel master port for external graphics controllers. The 100-pin TQFP provides generous GPIO (78 I/O), five 16-bit timer/counters, nine compare/PWM outputs and nine input-capture channels for motor-control and power-converter designs. Architecturally, the PIC32MZ EF core includes DSP-enhanced single-cycle MAC, saturating and fractional math units, dual-precision FPU and tightly coupled prefetch cache. The dual-panel Flash and shadow register set let firmware keep both old and new images resident, so a watchdog reset never leaves the unit bricked even if a new image fails to boot. Internal LDO supplies 1.8V to the core while I/O retains 3.3V compatibility, simplifying mixed-voltage designs. Typical applications include industrial IoT gateways, HMI and graphics touch panels, automotive infotainment prototyping, motor-control drives, audio peripherals with I²S/USB streaming, and secure connected sensors. Industrial -40C to +85C parts are required for outdoor and factory-floor deployment. For automotive-grade operation in -40C to +125C select PIC32MZ1024EFE100-E/PF or Q-graded variants. When designing with this part, allocate boot pins on quad 1 first; PGEC1/PGED1 must remain accessible for ICSP programming and debug. Place a 0.1 µF decoupling capacitor adjacent to every VDDCORE/VDD pin pair and keep the analog AV+ supply trace isolated from digital switching currents. Always enable the WDT and a backup image in dual-panel Flash to recover from failed live-update events. This page synthesizes distributor pricing, drop-in alternatives in the same 100-TQFP footprint, and practical design notes for the PIC32MZ EF family not consolidated in any single manufacturer document.

USD $9.40 有现货
PIC32MZ1024EFE100-I/PT - 200MHz 32-bit MCU, 1MB Flash, 100-TQFP | Microchip
PIC32MZ1024EFE100-I/PT

PIC32MZ1024EFE100-I/PT - 200MHz 32-bit MCU, 1MB Flash, 100-TQFP | Microchip

The Microchip Technology PIC32MZ1024EFE100-I/PT is a high-performance 32-bit MIPS M-Class microcontroller operating at up to 200 MHz, delivering 330 DMIPS of throughput. It integrates 1 MB of Flash program memory and 256 KB of SRAM in a 100-pin TQFP (12x12 mm) industrial-temperature package, with integrated FPU, HS USB, Ethernet MAC, SQI, and advanced analog peripherals. A 32-bit MCU (microcontroller) is a single-chip computer that integrates a high-performance processor core, Flash program memory, SRAM, and peripherals (ADCs, timers, communication controllers). The PIC32MZ EF family belongs to the MIPS Warrior M-class taxonomy: MCU -> 32-bit MCU -> MIPS32 M-Class -> PIC32MZ EF family -> embedded connectivity with FPU. The Floating Point Unit accelerates IEEE 754 single/double precision math, while the MIPS core adds DSP extensions including four 64-bit accumulators and single-cycle MAC for saturating and fractional arithmetic. Key features include an integrated 200 MHz / 330 DMIPS MIPS Warrior M-class core with DSP extensions, an IEEE 754-compliant FPU, dual-panel Flash for live firmware update support, 1 MB Live-Update Flash, 256 KB SRAM, HS USB 2.0 host/device/OTG, 10/100 Ethernet MAC with IEEE 1588 support, dedicated SQI (Serial Quad Interface) for external Flash, 12-bit 18 MSPS ADC, and a Cryptographic Engine disabled variant (-I/PT lacks crypto accelerators per Mouser listing). I/O count is approximately 78 user pins across multiple 5V-tolerant ports. The architecture combines a 200 MHz pipelined MIPS core with dedicated DMA and dual-panel Flash, enabling seamless over-the-air firmware upgrades without service interruption. Memory protection, a 16-channel DMA controller, and a Peripheral Pin Select (PPS) subsystem let designers reassign digital peripheral functions to nearly any GPIO, which dramatically simplifies mixed-interface designs. The 12-bit 18 MSPS ADC, 5 analog comparators, and dedicated crypto-disabled silicon revision make the -I/PT variant cost-optimized for industrial connectivity nodes. Typical applications include industrial Ethernet gateways, building automation controllers, IoT edge nodes with TLS, USB peripherals, and human-machine interface (HMI) graphics panels. The 200 MHz throughput and HS USB 2.0 make it well suited for industrial touchscreen HMIs and high-speed USB audio/MIDI peripherals. When designing with this device, allocate at least one SQI line for an optional external Flash if your application exceeds 1 MB of firmware plus data logging. Use the dual-panel Flash feature to safely perform live firmware updates by writing to the inactive panel and switching atomically on next reset. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet - giving engineers a single reference for PCB layout, peripheral selection, and BOM risk management.

USD $8.10 有现货
PIC32MZ1024EFE100T-E/GJX - 32-bit 200MHz MCU 1MB Flash | Microchip
PIC32MZ1024EFE100T-E/GJX

PIC32MZ1024EFE100T-E/GJX - 32-bit 200MHz MCU 1MB Flash | Microchip

The Microchip PIC32MZ1024EFE100T-E/GJX is a 32-bit MIPS32 M-Class PIC microcontroller running up to 200 MHz with 1 MB of Flash and 256 KB of SRAM, housed in a 100-pin TFBGA (7x7 mm) package. It is part of the PIC32MZ EF family, the connectivity-targeted tier that integrates high-speed USB 2.0, 10/100 Ethernet MAC (ENET), and a Quad-SPI (SQI) interface alongside the standard PIC32 peripheral set. The part suffix 'T-E' denotes tape-and-reel packaging and the -40C to +125C automotive operating temperature grade, and 'GJX' identifies the 100-ball TFBGA case. AEC-Q100 qualification is implied by the -E temperature grade. A 32-bit microcontroller (MCU) is a single-chip processor that integrates a CPU core, program memory (Flash), data memory (SRAM), and a programmable peripheral set in one device. The PIC32MZ EF family sits in Microchip's high-performance MCU tier, above the PIC32MX and SAM Cortex-M lines, with the MIPS32 M-Class core providing deterministic interrupt latency, hardware multiply/divide, and a 5-stage pipeline for headroom above 200 MHz. Within the broader taxonomy: MCU -> 32-bit MCU -> MIPS32 MCU -> PIC32MZ EF family -> connectivity MCU. Key features include 1 MB (1M x 8) Flash with live-update partitioning, 256 KB SRAM, an FPU (single-precision IEEE 754), a 200 MHz system clock with 50 MHz peripheral bus, and analog peripherals such as a 12-bit ADC up to 18 MSPS, 12-bit DACs, and multiple comparators. Connectivity features include USB 2.0 High-Speed OTG, 10/100 Ethernet MAC with RMII/MII interfaces, up to six UART/SPI/I2C channels, and SQI for high-throughput serial Flash expansion. The device integrates a crypto engine absent on this 'E' SKU (no Crypto, no CAN, as confirmed by distributor listings). Typical applications include industrial IoT gateways, automotive body and HMI controllers, Ethernet-connected motor drives, USB peripherals, and graphic-touchscreen interfaces. The wide operating temperature range and AEC-Q100 grading make it suitable for automotive body electronics and harsh-environment industrial nodes. When designing with this device, ensure the TFBGA's 0.65 mm pitch is matched to your PCB fabrication tolerances and that the 1.0 V core supply is generated by the on-chip LDO from a single 3.3 V rail. The 100-pin TFBGA is pin-limited compared to the 144-pin variants; if you need the full peripheral count plus Crypto/CAN, consider the PIC32MZ1024EFF100T (with Crypto + CAN) in the same TFBGA footprint. This page synthesizes distributor pricing, AEC-Q100-qualified drop-in alternatives, and practical design notes not consolidated on the manufacturer datasheet alone.

USD $7.95 有现货
PIC32MZ1024EFE100T-I/GJX - 200MHz 32-bit MCU, 1MB Flash, TFBGA-100 | Microchip
PIC32MZ1024EFE100T-I/GJX

PIC32MZ1024EFE100T-I/GJX - 200MHz 32-bit MCU, 1MB Flash, TFBGA-100 | Microchip

The Microchip Technology PIC32MZ1024EFE100T-I/GJX is a high-performance 32-bit MIPS M-Class microcontroller running up to 200 MHz with 1 MB Flash and 256 KB SRAM, housed in a 100-pin TFBGA (7x7 mm) package for space-constrained industrial and connectivity designs. The part integrates USB-HS, Ethernet (ENET), and SQI (Serial Quad Interface) peripherals, making it a connectivity-focused member of the PIC32MZ EF family. The "E" in the family name denotes the enhanced analog/memory tier, while "F" indicates floating-point unit (FPU) support and "100" specifies the 100-pin pin-count variant. A 32-bit MCU (Microcontroller Unit) is an integrated circuit containing a CPU core, Flash program memory, SRAM, and programmable peripherals on a single die. Within the taxonomy, PIC32MZ EF devices sit inside the broader category of MIPS32 M-Class microcontrollers, which belong to the larger family of RISC microcontrollers, then SoCs (System-on-Chip), and ultimately integrated circuits. Microchip's PIC32 line bridges legacy 8/16-bit PIC architectures with 32-bit ARM-class performance, while remaining code-compatible with the MPLAB Harmony ecosystem. Key features of this part include a MIPS32 M-Class core with hardware FPU and DSP extensions, 1 MB Flash (1M x 8), 256 KB SRAM, USB 2.0 High-Speed (PHY on-chip), 10/100 Mbps Ethernet MAC, SQI for high-throughput external memory or display interfaces, and multiple UART/SPI/I2C/CAN ports. The device supports up to 200 MHz CPU clock with 83 DMIPS per core and integrates a 12-bit ADC with up to 42 analog inputs depending on package variant. The PIC32MZ EF family uses a superscalar MIPS core, dual-bank Flash with live update capability, and a peripheral bus matrix that allows simultaneous DMA and CPU accesses. The 7x7 mm TFBGA-100 footprint is one of the smallest 100-pin options in this family, enabling high-density board designs while still exposing most peripherals of the larger 144-pin variants. Typical applications include industrial Ethernet gateways, USB peripherals and human-interface devices, IoT edge nodes, graphics/HMI controllers with external display, and motor-control subsystems. The combination of USB-HS + ENET + SQI makes the part particularly attractive for protocol-conversion and connectivity bridge designs in industrial automation. When designing with this device, allocate PCB area for the TFBGA-100 land pattern and use Microchip's recommended 4-layer stack-up. Decoupling requires 0.1 µF capacitors on every AVDD/DVDD pair and a bulk 4.7 µF tantalum near the core supply. Ensure firmware is built with the matching XC32 compiler version for the EF silicon revision to avoid errata workarounds. This page synthesizes distributor pricing, drop-in same-package alternatives from the same PIC32MZ EF family, and practical design notes not found in the manufacturer datasheet summary.

USD $8.10 有现货
PIC32MZ1024EFE100T-I/PF - 200MHz 32-Bit MCU 1MB Flash | Microchip
PIC32MZ1024EFE100T-I/PF

PIC32MZ1024EFE100T-I/PF - 200MHz 32-Bit MCU 1MB Flash | Microchip

The Microchip Technology PIC32MZ1024EFE100T-I/PF is a high-performance MIPS32 M-Class 32-bit microcontroller from the PIC32MZ EF family running at up to 200 MHz with 1 MB of Flash program memory and 256 KB of SRAM, housed in a 100-pin TQFP (14x14 mm) package with industrial -40C to +85C operating range. A microcontroller (MCU) is a single-chip computer that integrates a CPU core, program and data memory, peripherals, and I/O on one die. The PIC32MZ EF family belongs to the broader taxonomy of microcontrollers -> 32-bit microcontrollers -> MIPS-based MCUs -> embedded processors -> semiconductors. EF series parts add a hardware floating-point unit (FPU), making them suitable for DSP and graphics workloads. The "EFE" in the part number indicates the Enhanced Feature set, Ethernet connectivity, and 1 MB Flash density tier. Key differentiating features include a 200 MHz MIPS32 M-Class core with FPU, 1 MB of Live-Update dual-bank Flash, 256 KB SRAM, dedicated 160 KB boot Flash, High-Speed USB 2.0 with PHY, 10/100 Ethernet MAC, hardware crypto accelerators are absent in this -EF suffix (no crypto), 12-bit ADC with up to 40 analog input channels, 9 timers and 2 watchdog timers, CAN, I2C, SPI, UART, and SQI (Quad-SPI) interfaces. The 100-pin TQFP footprint and zero-pinning issues across the EF family enable layout reuse for variant migration. Architecture-wise, the device uses a 5-stage pipeline MIPS32 M-Class core with DSP extensions and IEEE 754 single-precision FPU. The dual-bank Flash supports Live-Update firmware field upgrades without downtime. Peripheral DMA channels offload data movement from the core, enabling deterministic throughput for USB, Ethernet, and ADC streaming. Typical applications include industrial Ethernet gateways, IoT edge nodes, HMI/graphics controllers, motor-control BLDC/PMSM drives, automotive infotainment clusters, and audio processing systems with USB streaming. The combination of HS USB, Ethernet, and 12-bit ADC at 200 MHz makes it a strong fit for connected embedded designs requiring on-chip networking. When designing with this part, budget for a 25 MHz external crystal driving the PLL to reach 200 MHz core clock, observe decoupling on every VDD/VSS pair, and ensure unused pins are configured as outputs to minimize current draw. The Live-Update Flash requires linker configuration to split the image between Bank 1 and Bank 2. This page synthesizes Microchip datasheet specifications, distributor pricing tiers, drop-in TQFP-100 alternatives from the same PIC32MZ family, and practical design notes that go beyond the manufacturer datasheet to support AI citation and engineer decision-making.

USD $9.05 有现货
PIC32MZ1024EFE100T-I/PT - 200MHz 1MB Flash MCU | Microchip | 100-TQFP
PIC32MZ1024EFE100T-I/PT

PIC32MZ1024EFE100T-I/PT - 200MHz 1MB Flash MCU | Microchip | 100-TQFP

The Microchip Technology PIC32MZ1024EFE100T-I/PT is a 32-bit MIPS32 M-Class PIC32MZ microcontroller IC running at 200MHz with 1MB (1M x 8) of Flash program memory and 256KB SRAM, housed in a 100-pin TQFP (12x12 mm) package. It integrates a high-performance MIPS microAptiv core with FPU, dedicated Audio/Graphics interfaces, High-Speed USB 2.0, 10/100 Ethernet MAC, SQI (Serial Quad Interface) for high-throughput external memory, and a 12-bit 18-channel ADC with up to 2 MSPS conversion rate. A 32-bit microcontroller (MCU) is a programmable system-on-chip that integrates a high-performance processor core, Flash program memory, SRAM data memory, and a rich set of on-chip peripherals (timers, ADC/DAC, communication controllers, and GPIOs) on a single silicon die. Within the broader hierarchy, this PIC32MZ EF family belongs to the microcontroller family -> embedded processor -> semiconductor IC category, and is engineered for advanced connectivity, graphics (HMI), industrial, and IoT edge applications. Key features include 200MHz core clock with hardware multiply/divide and DSP extensions, 128KB SRAM for data plus 256KB total, multiple communication peripherals (HS-USB, Ethernet, CAN-FD ready, I2S/audio, SPI, I2C, UART), and a 12-bit ADC capable of up to 18 analog input channels. The 100-TQFP package supports full industrial temperature operation from -40C to +85C and is drop-in pin-compatible with the wider PIC32MZ EF 100-pin TQFP family for scalable design. The architecture uses a 5-stage pipeline microAptiv core, a tightly coupled 32-bit peripheral bus, and dedicated DMA channels for deterministic peripheral performance. On-chip memory is configured with separate boot Flash and LiveUpdate Flash regions for fail-safe firmware upgrades, and the integrated Crypto engine (select variants) accelerates AES/SHA/HMAC workloads. The integrated FPU and DSP extensions accelerate control-loop math and audio processing without burdening the CPU. Typical applications include industrial IoT gateways requiring Ethernet + Wi-Fi host control, graphics HMI terminals with TFT LCD driving, USB Audio Class 2.0 audio interfaces, motor control with FOC algorithms, automotive telematics and CAN nodes, and high-performance connected sensors. With its large 1MB Flash footprint, the device can host rich TCP/IP stacks (TCP/IP Lite/MPLAB Harmony) and full USB stacks simultaneously. When designing with this MCU, ensure the 100-pin TQFP land pattern uses 0.4mm pitch with proper thermal vias under the exposed pad region (if present) and that the 12-bit ADC reference pins are decoupled with 100nF + 10uF ceramic capacitors. For HS-USB designs, route the D+/D- traces with 90-ohm differential impedance and place the 27-ohm source-series resistors close to the MCU. This page synthesizes distributor pricing, drop-in family alternatives, and practical design notes not found in the manufacturer datasheet alone.

USD $6.78 有现货