微控制器

产品（18701)

STM32L552ZET6 - 110MHz Cortex-M33 512KB MCU | STMicroelectronics
STM32L552ZET6

STM32L552ZET6 - 110MHz Cortex-M33 512KB MCU | STMicroelectronics

The STMicroelectronics STM32L552ZET6 is an ultra-low-power 32-bit microcontroller based on the Arm Cortex-M33 core running at up to 110 MHz, with 512 KB of flash memory and 256 KB of SRAM, housed in a 144-pin LQFP (20x20 mm) package. A microcontroller (MCU) is a compact integrated circuit that combines a processor core, memory, and programmable peripherals on a single die to govern a dedicated embedded function. Within the system hierarchy, an MCU is an embedded processor, which belongs to the broader integrated-circuit family. The STM32L552ZET6 belongs to the STM32L5 series, STMicroelectronics' flagship ultra-low-power family, positioned above the STM32L4 series and below the STM32U5 series. Key features include the ARMv8-M architecture with TrustZone hardware security isolation, a floating-point unit (FPU) and DSP instructions for efficient signal processing, 165 DMIPS of performance, and flexible power modes with consumption as low as 33 uA/MHz in Run mode and 0.29 uA in Standby mode. Peripherals include multiple USART/UART, SPI, I2C, CAN-FD, USB FS, SAI audio interfaces, a 12-bit ADC, a 12-bit DAC, and an integrated SMPS buck converter option in the family. Technically, the device is fabricated on a 40 nm process and operates from a 1.71 V to 3.6 V supply. TrustZone enables secure boot, secure firmware update, and hardware-enforced separation of secure and non-secure software domains, which is essential for IoT devices subject to modern security requirements. Typical applications include smart-home and IoT edge nodes, industrial sensors, wearable health monitors, and smart meters where secure communication and multi-year battery life are critical. Design considerations: use STM32CubeMX for pin configuration and peripheral setup, decouple all VDD/VSS pairs with 100 nF capacitors, and select the MSI RC oscillator or an external crystal according to timing accuracy needs. This page synthesizes distributor pricing, drop-in alternatives, comparison tables, and practical design notes not found in the manufacturer datasheet.

询价 联系我们
STM32L552ZET6Q - 110MHz Cortex-M33 MCU 512KB | STMicroelectronics
STM32L552ZET6Q

STM32L552ZET6Q - 110MHz Cortex-M33 MCU 512KB | STMicroelectronics

The STMicroelectronics STM32L552ZET6Q is an ultra-low-power 32-bit ARM Cortex-M33 microcontroller with TrustZone and FPU, operating up to 110 MHz and delivering 165 DMIPS, packaged in a 144-pin LQFP (20x20 mm). The device integrates 512 KB of Flash memory and 256 KB of SRAM, plus an on-chip SMPS that improves dynamic efficiency at high CPU loads. An ARM Cortex-M33 microcontroller is a 32-bit RISC core designed for energy-sensitive embedded applications that require hardware isolation between trusted and untrusted code. The Cortex-M33 sits within the broader ARM Cortex-M family (M0/M0+/M3/M4/M7) and belongs to the same ultra-low-power STM32L5 series as the M33-only STM32L552 and Cortex-M33+TrustZone variants. TrustZone for ARMv8-M enables secure boot, secure firmware update, and isolation of cryptographic assets - essential for IoT endpoints subject to evolving cybersecurity regulations. Key features of the STM32L552ZET6Q include the Cortex-M33 core with FPU and TrustZone, 512 KB dual-bank Flash supporting secure/insecure partitioning, 256 KB SRAM, SMPS step-down converter for core supply, multiple low-power modes (Shutdown, Standby, Stop2 with RTC), up to 16-bit ADC, 12-bit DAC, comparators, op-amps, USB Type-C Power Delivery, CAN FD, SDMMC, and crypto/hash accelerators (AES-256, SHA-256, PKA). The part operates across -40C to +85C industrial temperature range. The architecture couples the Cortex-M33 with an AHB/APB bus matrix, DMA controllers, and a wide peripheral set, allowing designers to run DSP code via the FPU while keeping average power draw well below 100 uA/MHz at moderate loads. The integrated SMPS supplies the core, freeing the external LDO for I/O and analog, simplifying PCB design in battery-powered nodes. Typical applications include secure IoT sensors, smart-metering endpoints, wearables, industrial HMI controllers, USB Type-C devices, and low-power wireless sensor nodes. The combination of TrustZone isolation and hardware crypto accelerators also suits connected medical peripherals and asset-tracking tags. When designing with the STM32L552ZET6Q, ensure the SMPS inductor selection matches the datasheet reference design and that decoupling is placed adjacent to every VDD pin pair. TrustZone partitioning requires both Secure and Non-Secure firmware images to be provisioned correctly; verify the secure-boot chain in your BSP before deploying production units. This page synthesizes distributor pricing, drop-in 144-LQFP alternatives, and practical TrustZone/SMPS design notes not aggregated in the manufacturer datasheet.

询价 联系我们
STM32L562RET6 - 512KB Flash, 110MHz Cortex-M33 MCU | STMicroelectronics
STM32L562RET6

STM32L562RET6 - 512KB Flash, 110MHz Cortex-M33 MCU | STMicroelectronics

The STMicroelectronics STM32L562RET6 is an ultra-low-power 32-bit microcontroller based on the Arm Cortex-M33 core with TrustZone, running at up to 110 MHz. It integrates 512 KB of flash memory and 256 KB of SRAM, and is housed in a 64-pin LQFP (LQFP64) package. This device is part of the STM32L5 series, designed for secure and power-efficient applications. What is a microcontroller? A microcontroller (MCU) is a compact integrated circuit containing a processor core, memory, and programmable input/output peripherals on a single chip. It is the brain of embedded systems, executing firmware to control devices such as sensors, motors, and displays. In the system hierarchy, a microcontroller is a type of embedded processor, which falls under the broader category of integrated circuits (ICs) and semiconductors. The STM32L562RET6 specifically combines high performance with ultra-low power consumption, making it suitable for battery-powered and energy-harvesting applications. Key features include the Arm Cortex-M33 core with TrustZone for hardware-enforced security, a floating-point unit (FPU) for math-intensive tasks, and a rich set of peripherals including multiple UARTs, SPIs, I2Cs, USB, and an advanced 12-bit ADC. The device supports a wide supply voltage range of 1.71V to 3.6V and operates over a temperature range of -40°C to +85°C. It also features a low-power mode with current consumption as low as 100 nA in standby mode, extending battery life in portable devices. Technically, the STM32L562RET6 is built on a 40nm process technology, enabling high performance with low leakage. The TrustZone security feature isolates critical code and data, protecting against software attacks. The device includes a hardware cryptographic accelerator supporting AES, RSA, and ECC, as well as a true random number generator (TRNG) for secure key generation. These features make it ideal for IoT devices requiring secure communication and data protection. Typical applications include secure IoT nodes, smart meters, wearable health monitors, industrial sensors, and battery-powered medical devices. The combination of ultra-low power and security makes it a preferred choice for edge devices that must operate for years on a single battery while protecting sensitive data. When designing with this MCU, ensure proper decoupling of the power supply pins with 100nF capacitors placed close to each VDD pin. The VDDA pin requires a separate 1uF capacitor for analog noise filtering. For low-power operation, configure the clock to use the low-speed internal oscillator (LSI) and enable the low-power modes in the firmware to achieve the specified standby current.

询价 联系我们
STM32L562ZET6 - 110MHz Cortex-M33 512KB MCU | STMicroelectronics
STM32L562ZET6

STM32L562ZET6 - 110MHz Cortex-M33 512KB MCU | STMicroelectronics

The STMicroelectronics STM32L562ZET6 is an ultra-low-power 32-bit microcontroller featuring an ARM Cortex-M33 core with TrustZone security and FPU, running at up to 110 MHz, with 512 KB of flash memory and 256 KB of SRAM, housed in a 144-pin LQFP (20x20 mm) package. An ARM Cortex-M33 microcontroller is a modern 32-bit embedded processor core that belongs to the ARM Cortex-M family, positioned above the Cortex-M0/M3/M4 in feature set. The Cortex-M33 implements the Armv8-M architecture with optional TrustZone hardware security, which enforces isolation between secure and non-secure software domains. Within the system hierarchy, the MCU integrates the CPU core, memory, and peripherals into a single chip, serving as the main controller in embedded power-management and security architectures. Key features of the STM32L562ZET6 include hardware cryptographic accelerators supporting AES, RSA, and ECC, a true random number generator (TRNG), and a rich analog peripheral set with a 12-bit ADC, 12-bit DAC, and multiple comparators. These enable secure boot, encrypted communication, and direct sensor interfacing without external security chips. The device is built on STMicroelectronics ultra-low-power 40 nm technology, consuming only 19 uA/MHz in Run mode with dynamic voltage scaling. Multiple low-power modes include Sleep, Low-power Run, Low-power Sleep, Stop, and Standby, with typical Standby current of 100 nA. The DSP instructions and hardware FPU accelerate signal processing in power-constrained designs. Typical applications include secure IoT nodes, smart meters, industrial control systems, medical and wearable devices, where TrustZone protects firmware and data while ultra-low-power modes extend battery life for years. When designing with this MCU, decouple every VDD pin with a 100 nF capacitor placed close to the pin, and enable TrustZone with secure boot for security-critical firmware. Verify supply sequencing per the ST datasheet. This page synthesizes distributor pricing, same-package drop-in alternatives, and practical design notes not found in the manufacturer datasheet, with pricing as of 2026-09-06.

询价 联系我们
STM32MP135AAC3 - 650MHz Arm Cortex-A7 MPU | STMicroelectronics
STM32MP135AAC3

STM32MP135AAC3 - 650MHz Arm Cortex-A7 MPU | STMicroelectronics

The STMicroelectronics STM32MP135AAC3 is a 32-bit Arm Cortex-A7 microprocessor (MPU) with the STM32MP135 series clocking up to 1 GHz, an integrated LCD-TFT controller, dual Ethernet, 2x CAN FD, 2x ADC and 24 timers, housed in a TFBGA361 package with industrial temperature grade. The AAC3 ordering code corresponds to a Cortex-A7 core operating at the series base speed grade (650 MHz per ST eStore listings for equivalent A-speed-grade parts such as STM32MP135AAE3). An MPU (microprocessing unit) sits above an MCU in the embedded hierarchy: it runs rich operating systems such as Linux on a Cortex-A application core, offloading real-time tasks to companion Cortex-M devices or peripherals. The STM32MP1 series bridges this gap by combining an application processor with STM32-style peripherals, letting developers reuse STM32 ecosystem tools such as STM32CubeMX and STM32CubeProgrammer. Key features include the single Cortex-A7 core with NEON and FPU, an LCD-TFT display interface, a parallel camera interface, 2x Gigabit-capable Ethernet MACs, 2x CAN FD controllers, 2x 12-bit ADCs, and 24 timers. External DRAM support follows the JEDEC LPDDR2 (JESD209-2E) and LPDDR3 (JESD209-3B) specifications over a 16-bit interface, with a programmable 8-bit or 16-bit data width, an advanced memory scheduler and three-class QoS support on reads. The memory subsystem architecture includes an advanced SDRAM command generator and scheduler that maintains deterministic bandwidth under mixed traffic, which matters for display refresh plus network throughput in HMI designs. Rich connectivity - dual Ethernet, CAN FD, USB and audio interfaces - targets industrial gateways, operator terminals and graphics panels. Typical applications include industrial HMI panels, edge gateways, building automation controllers and POS/graphics terminals where an LCD-TFT controller and dual Ethernet eliminate external bridge chips. Design consideration: budget for LPDDR2/LPDDR3 routing length matching on the 16-bit DRAM interface early, as the TFBGA361 ball map constrains trace escape. This page synthesizes distributor pricing, drop-in same-family alternatives, and practical design notes not found in the manufacturer datasheet.

询价 联系我们
STM32MP135DAC3 - 1GHz Cortex-A7 MPU, TFBGA361 | STMicroelectronics
STM32MP135DAC3

STM32MP135DAC3 - 1GHz Cortex-A7 MPU, TFBGA361 | STMicroelectronics

The STMicroelectronics STM32MP135DAC3 is an Arm Cortex-A7 microprocessor (MPU) running at up to 1 GHz, delivered in a TFBGA361 package. It integrates an LCD-TFT controller, parallel camera interface, 2x Ethernet MAC, 2x CAN FD controllers, 2x 12-bit ADCs, 24 timers, multiple audio interfaces, and hardware crypto and advanced security features. A microprocessor unit (MPU) sits at the top of the embedded processing hierarchy, above microcontrollers (MCUs): unlike an MCU, an MPU such as the STM32MP135 series boots a full operating system (typically Linux via OpenSTLinux, ST's official distribution) from external DDR memory and executes application code from external NOR/NAND flash or eMMC. The STM32MP1 family bridges ST's STM32 MCU ecosystem and higher-performance application processors, letting designers reuse STM32 peripherals and development tooling while gaining Linux-class compute. Key features of the STM32MP135DAC3 include a single Cortex-A7 core clocked up to 1 GHz for high single-thread performance, dual 10/100 Mbps Ethernet MACs for industrial networking and redundant communication, dual CAN FD for vehicle and factory bus connectivity, and an LCD-TFT display controller supporting graphical HMIs. The 2x 12-bit ADCs and 24 timers enable precise motor control and analog acquisition, while the parallel camera interface supports vision-based sensing. Hardware crypto and advanced security features support secure boot and data protection. Architecturally, the STM32MP135 belongs to the STM32MP1 series entry line, which drops the Cortex-M4 co-processor found on MP157-class parts in favor of a cost-optimized single Cortex-A7 core with a rich peripheral set. This makes it well suited to cost-sensitive smart-industrial nodes that still require a full Linux stack, GUI, and networking. Typical applications include industrial HMI and control panels (LCD-TFT plus touch), smart meters and gateways (dual Ethernet, CAN FD), and motor drives and power conversion (24 timers, 2x ADC). The device also fits connected audio equipment using its audio interfaces. For design, budget external DDR3/DDR3L memory, a PMIC power tree (ST recommends STPMIC-class solutions), and boot flash; verify the TFBGA361 footprint against the ST datasheet before layout. This page adds value beyond the ST datasheet by synthesizing drop-in family alternatives, application pairing guidance, and engineering design notes in a single structured reference.

询价 联系我们
STM32MP135DAF7 - Arm Cortex-A7 1GHz MPU TFBGA320 | ST
STM32MP135DAF7

STM32MP135DAF7 - Arm Cortex-A7 1GHz MPU TFBGA320 | ST

The STMicroelectronics STM32MP135DAF7 is a 32-bit Arm Cortex-A7 single-core microprocessor (MPU) running at up to 1 GHz, housed in a 320-ball TFBGA package measuring 11 x 11 mm. As a member of the STM32MP1 series, it targets cost-sensitive industrial and graphics applications that require Linux-class processing power. A microprocessor unit (MPU) sits above a microcontroller (MCU) in the embedded-system hierarchy: while an MCU integrates flash and RAM for bare-metal or RTOS execution, an MPU such as the STM32MP135DAF7 boots full operating systems - typically OpenSTLinux, ST's Yocto-based distribution - from external DDR memory and manages rich software stacks, file systems, and networking. The Cortex-A7 core provides high single-thread performance with low power consumption, making it a common choice for HMI panels, gateways, and industrial control. Key features of the STM32MP135DAF7 include the single Arm Cortex-A7 core at up to 1 GHz, a rich peripheral set with multiple UART, SPI, I2C, CAN-FD, Ethernet MAC, and USB interfaces for connectivity, and integrated graphics-oriented capabilities that support display pipelines in HMI designs. The STM32MP13x line is pin-compatible within its family, enabling designers to scale performance or feature set without PCB redesign. Technically, the D vs F ordering code distinguishes security/feature variants within the family (the F variant offers an extended feature set, while the D variant is the cost-optimized version); verify the exact cryptographic and security feature delta against the manufacturer datasheet before selection. The part operates over the industrial temperature range and is supplied in a lead-free, RoHS-compliant TFBGA-320 ball grid array. Typical applications include industrial HMI and human-machine interfaces with touch displays, IoT gateways and edge nodes requiring Ethernet and Linux networking, and motor-control or factory-automation systems that pair the Cortex-A7 with STM32 Cortex-M MCUs for real-time tasks. A key design consideration: the STM32MP135DAF7 has no internal program memory, so the BOM must include DDR3(L) DRAM, a boot device (eMMC/NAND/NOR/SD), and a proper power tree - ST provides reference designs and PMIC suggestions in its application notes. This page synthesizes distributor pricing (DigiKey, Mouser, LCSC, and others, as of 2026-09-06), same-family drop-in alternatives, and practical design notes not found in the manufacturer datasheet.

询价 联系我们
STM32MP135FAC3 - 1GHz Cortex-A7 MPU | STMicroelectronics
STM32MP135FAC3

STM32MP135FAC3 - 1GHz Cortex-A7 MPU | STMicroelectronics

The STMicroelectronics STM32MP135FAC3 is a microprocessor unit (MPU) based on a single Arm Cortex-A7 32-bit RISC core operating at up to 1 GHz, with LPDDR2/LPDDR3/LPDDR/DDR3 DRAM support over a 16-bit interface, housed in a TFBGA361 package. An MPU (microprocessor unit) sits at the top of the embedded processing hierarchy, above microcontrollers: unlike an MCU that runs code from internal flash, an MPU executes a full operating system such as Linux from external DRAM and storage. The STM32MP135 belongs to STMicroelectronics STM32MP1 family of Arm-based MPUs, which combine application-class Cortex-A compute with STM32 ecosystem tooling and peripherals. Key features of the STM32MP135FAC3 include the 1 GHz Cortex-A7 core (the top speed grade of the family), the STM32MP13x memory controller supporting JEDEC LPDDR2 (JESD209-2E), LPDDR3 (JESD209-3B), LPDDR and DDR3 SDRAM with a programmable 16-bit full or 8-bit half data width, and an advanced memory scheduler with SDRAM command generation and QoS support offering three read traffic classes and two write traffic classes. The integrated DDR subsystem means designers can attach cost-effective DRAM directly, while the advanced scheduler preserves real-time behavior under mixed traffic loads - important for HMI, gateways, and control nodes running Linux. As a member of the STM32MP1 series, it is supported by the STM32Cube ecosystem, OpenSTLinux distribution, and STM32CubeMX configuration tools. Typical applications include industrial HMI panels, IoT gateways, building automation controllers, and embedded Linux devices where a single cost-optimized Cortex-A7 core with high clock speed is sufficient. When designing the DDR3 interface, follow the ST reference design for trace length matching and termination, and verify boot media (eMMC, SD, NAND, or serial NOR) selection against the STM32MP135 boot pins. This page adds value beyond the datasheet by synthesizing distributor pricing context, drop-in same-family alternatives, and practical design notes for STM32MP135FAC3 selection and sourcing.

询价 联系我们
STM32MP135FAF7 - Cortex-A7 1GHz 320-TFBGA MPU | STMicroelectronics
STM32MP135FAF7

STM32MP135FAF7 - Cortex-A7 1GHz 320-TFBGA MPU | STMicroelectronics

The STMicroelectronics STM32MP135FAF7 is a single-core Arm Cortex-A7 32-bit microprocessor (MPU) from the STM32MP1 series, running at up to 1 GHz (DigiKey) / 900 MHz (Mouser listing) and housed in a 320-ball TFBGA package measuring 11x11 mm. It integrates a display controller, CAN-FD interfaces, and hardware security features for industrial, graphics, and security applications. A microprocessor unit (MPU) sits above the microcontroller (MCU) in the embedded hierarchy: while an MCU integrates flash and SRAM on-chip for bare-metal execution, an MPU like the STM32MP135FAF7 executes a full embedded Linux (OpenSTLinux distribution) and relies on external DDR memories for its working memory. MPUs therefore belong to the broader family of application processors and system-on-chip solutions for smart devices. Key features of the STM32MP135FAF7 include its 16-bit LPDDR2/LPDDR3 memory controller compliant with JEDEC JESD209-2E and JESD209-3B specifications, an advanced DDR scheduler with three read traffic classes and QoS support, and a TFT color LCD controller for graphics output. Peripherals include multiple UARTs, SPI, I2C, SDMMC, USB 2.0 HS, Ethernet, and CAN-FD interfaces, enabling rich connectivity for industrial gateways and HMI panels. Technically, the device belongs to the STM32MP13x entry-line of the STM32MP1 family, which focuses on cost-optimized Linux-capable processing. The F code in the part number denotes the highest memory configuration tier of the line, and the 7 suffix indicates the industrial temperature grade. The DDR interface supports full 16-bit or half 8-bit data width operation, allowing designers to trade memory cost against bandwidth in cost-sensitive products. Typical applications include industrial HMI touch panels, building automation controllers, IoT gateways, and connected devices requiring a secure Linux platform with CAN-FD fieldbus support. Its low-power single-core architecture also suits battery-buffered metering and portable instrumentation. A key design consideration is DDR memory selection: the LPDDR2/LPDDR3 controller requires careful signal-integrity-aware PCB layout of the 16-bit memory bus, and boot configuration pins must be strapped for the chosen boot device (eMMC, SD card, NAND, or serial flash). This page synthesizes distributor pricing from DigiKey, Mouser, and LCSC, drop-in same-family alternatives, and practical design notes not found in a single manufacturer datasheet, providing one-stop engineering and procurement information.

询价 联系我们
STM32MP151AAC3 - Cortex-A7 650MHz MPU TFBGA-361 | STMicroelectronics
STM32MP151AAC3

STM32MP151AAC3 - Cortex-A7 650MHz MPU TFBGA-361 | STMicroelectronics

The STMicroelectronics STM32MP151AAC3 is a 32-bit microprocessor (MPU) featuring a single Arm Cortex-A7 application core running at up to 650 MHz plus an Arm Cortex-M4 real-time coprocessor at 209 MHz, housed in a 361-ball TFBGA (12x12 mm) package. A microprocessor unit (MPU) sits above the microcontroller (MCU) in the embedded-processing hierarchy: unlike an MCU, an MPU runs a full OS such as Linux and delegates hard real-time tasks to a companion Cortex-M core. The STM32MP1 series bridges both worlds on one die, allowing Linux on the Cortex-A7 and deterministic control on the Cortex-M4 with shared peripherals and inter-processor communication. Key features include 35 communication interfaces (UART, SPI, I2C, CAN, USB, Ethernet MAC and more), 25 timers, and a TFT display controller for direct LCD interfacing. The device operates from a nominal core supply of 1.18 V to 1.25 V, with multi-rail power architecture typical of the STM32MP1 family. According to the ST product page, the STM32MP151A/D family is based on the high-performance Arm Cortex-A7 32-bit RISC core. Architecturally, the Cortex-A7 delivers the performance of a cost-effective Linux-capable applications processor, while the Cortex-M4 at 209 MHz shares the same peripheral set, enabling a true heterogeneous design. The TFT controller supports external display panels, making the part a single-chip HMI engine. There is no hardware crypto or secure boot in the STM32MP151 base configuration. Typical applications include industrial HMIs with TFT touch displays, building automation gateways, motor control systems combining Linux connectivity with real-time control, and IoT edge nodes. Per the alldatasheet description, the part integrates Arm Cortex-A7 650 MHz plus Cortex-M4 MPU, TFT, 35 communication interfaces and 25 timers. When designing, budget the multi-rail power tree carefully - VDDCORE requires 1.18-1.25 V - and plan for external DDR memory and boot media, as the MPU has no on-chip run-in system RAM for Linux. This page synthesizes distributor pricing, drop-in family alternatives, and practical design notes not found in the manufacturer datasheet.

询价 联系我们
STM32MP151AAD3 - Cortex-A7 650MHz MPU | STMicroelectronics
STM32MP151AAD3

STM32MP151AAD3 - Cortex-A7 650MHz MPU | STMicroelectronics

The STMicroelectronics STM32MP151AAD3 is a 32-bit Arm Cortex-A7 microprocessor (MPU) running at 650 MHz with an integrated Arm Cortex-M4 real-time coprocessor at 209 MHz, housed in a 257-ball TFBGA (10x10 mm) package. It belongs to the STM32MP1 series and provides 35 communication interfaces and 25 timers with an on-chip TFT display controller. An MPU (microprocessing unit) sits above the microcontroller (MCU) in the embedded-system hierarchy: while an MCU executes bare-metal or RTOS code on a single core, an MPU such as the STM32MP151 runs a full embedded Linux distribution on its Cortex-A7 application core while delegating hard real-time tasks to the companion Cortex-M4 core. This heterogeneous asymmetric-processing architecture lets a single chip replace an application processor plus a separate MCU, reducing BOM cost and board area in industrial and HMI designs. Key features include the dual-core Arm architecture (Cortex-A7 at 650 MHz for Linux-class workloads plus Cortex-M4 at 209 MHz for deterministic real-time control), a rich peripheral set of 35 communication interfaces covering UART, SPI, I2C, CAN, Ethernet, and more, 25 timers for PWM, motor control, and timing-critical functions, and an integrated TFT display controller that can drive color GUI panels without an external display bridge. Per the official ST product page, STM32MP151 family members are offered with or without hardware crypto and secure boot; engineers must confirm the exact security configuration for this ordering code in the datasheet. Technically, the device leverages ST's proven STM32 peripheral IP, so developers familiar with STM32 MCUs can reuse drivers and the Cortex-M4 firmware model while the Cortex-A7 side runs standard Linux. Typical applications include industrial HMI panels with TFT touchscreens, gateways and IoT edge nodes combining Linux connectivity with real-time control, and motor-drive or power-conversion systems requiring deterministic PWM from the M4 core. A key design consideration is power-supply sequencing and the required external DDR memory: like most application-class MPUs, the STM32MP151 relies on external DDR3/LPDDR memory and a PMIC (such as the STPMIC1) for controlled rail sequencing. Budget board area and cost accordingly. This page synthesizes distributor pricing from LCSC, DigiKey and Mouser, same-family drop-in alternatives, and practical design notes not found in the ST datasheet alone.

询价 联系我们
STM32MP151CAC3 - Cortex-A7 650MHz MPU TFBGA361 | STMicroelectronics
STM32MP151CAC3

STM32MP151CAC3 - Cortex-A7 650MHz MPU TFBGA361 | STMicroelectronics

The STMicroelectronics STM32MP151CAC3 is a microprocessor (MPU) from the STM32MP1 series, combining an Arm Cortex-A7 core running at 650 MHz with an Arm Cortex-M4 real-time coprocessor at 209 MHz, housed in a 361-ball TFBGA package measuring 12 x 12 mm and rated for -40C to +125C operation. A microprocessor unit (MPU) sits above a microcontroller (MCU) in the embedded-system hierarchy: while an MCU runs bare-metal or RTOS code from internal flash, an MPU boots a full operating system such as Linux from external memory and offloads hard real-time tasks to a companion core. The STM32MP1 line bridges these worlds by pairing an application-class Cortex-A7 with a deterministic Cortex-M4 on one die, letting one chip replace an MCU-plus-processor two-chip solution. Key features of the STM32MP151CAC3 include the dual-core asymmetric architecture (single 32-bit Cortex-A7 application core plus Cortex-M4 coprocessor), an integrated TFT display controller for graphical interfaces, and hardware secure boot with cryptographic acceleration for protected firmware images. Technically, the device belongs to the STM32 family STM32MP1 series and is fabricrated on STs proven process technology shared with the STM32 MCU portfolio, which means the Cortex-M4 side reuses familiar STM32 peripherals and register maps, shortening the learning curve for teams migrating from STM32F or STM32H7 MCUs. Linux support is provided through the STM32 MPU OpenSTLinux distribution and the ecosystem of ST tools. Typical applications include industrial HMI and TFT display panels, secure IoT gateways and edge nodes, and motor-control or power-conversion systems where the Cortex-M4 handles real-time control loops while the Cortex-A7 runs the user interface and connectivity stack. When designing with this MPU, plan for the multi-rail power sequencing required by the STM32MP1 family and provide high-speed PCB layout for the DDR memory interface and the 361-ball BGA escape routing. This page synthesizes distributor pricing, drop-in same-family alternatives, and practical design notes not found in the manufacturer datasheet.

询价 联系我们
STM32MP153AAC3 - Dual Cortex-A7 650MHz MPU | STMicroelectronics
STM32MP153AAC3

STM32MP153AAC3 - Dual Cortex-A7 650MHz MPU | STMicroelectronics

The STMicroelectronics STM32MP153AAC3 is a dual-core Arm Cortex-A7 32-bit microprocessor (MPU) with an integrated Arm Cortex-M4 real-time coprocessor, running the Cortex-A7 cores at up to 650 MHz, housed in a 361-ball TFBGA (12x12 mm) package. Part of the STM32MP1 series, it combines application-level Linux processing capability with deterministic real-time control in a single device. A microprocessor unit (MPU) sits above a microcontroller (MCU) in the embedded-system hierarchy: unlike an MCU, an MPU relies on external DDR memory and boot media, enabling full operating systems such as Linux or Android. The STM32MP1 line bridges these worlds by pairing Cortex-A7 application cores with a Cortex-M4 MCU core, allowing a single chip to run Linux while servicing hard real-time tasks. Key features include heterogeneous dual-core architecture (2x Cortex-A7 plus Cortex-M4), a TFT display controller for graphics interfaces, 37 communication interfaces, 29 timers, and advanced analog peripherals. The device operates from a 1.18V to 1.25V core supply and integrates the STM32 peripheral ecosystem familiar to STM32 MCU developers. Architecturally, the Cortex-A7 subsystem handles the open-source OS stack, while the Cortex-M4 executes deterministic control loops with low latency and independent peripherals. OpenSTLinux distribution support and ST's STM32Cube ecosystem provide a complete software development environment spanning both cores. Typical applications include industrial HMI panels, building automation gateways, programmable logic controllers, and connected devices requiring a display plus edge connectivity. Design consideration: because the STM32MP153AAC3 has no internal DDR memory, PCB layout must respect DDR3/LPDDR2 length-matching rules and ST's documented power-sequencing requirements. This page synthesizes distributor pricing, same-package family alternatives, and practical design notes not found in the manufacturer datasheet.

询价 联系我们
STM32MP153AAD3 - Dual Cortex-A7 650MHz MPU | STMicroelectronics
STM32MP153AAD3

STM32MP153AAD3 - Dual Cortex-A7 650MHz MPU | STMicroelectronics

The STMicroelectronics STM32MP153AAD3 is a microprocessor unit (MPU) combining dual Arm Cortex-A7 cores running at 650 MHz with a real-time Arm Cortex-M4 coprocessor at 209 MHz, housed in a 257-ball TFBGA package measuring 10x10 mm. It integrates a TFT display controller, 37 communication interfaces, 29 timers, advanced analog peripherals, and CAN FD support. An MPU (microprocessor unit) sits above a microcontroller (MCU) in the embedded-system hierarchy: it runs full operating systems such as Linux on high-performance application cores, while a tightly coupled Cortex-M4 coprocessor handles deterministic real-time tasks. The STM32MP1 family bridges these worlds on a single die, letting designers share peripherals, memory, and pinout between an open Linux environment and hard-real-time firmware. Key features include the heterogeneous dual-core architecture (2x Cortex-A7 at 650 MHz plus Cortex-M4 at 209 MHz), a CAN FD interface for industrial and automotive networking, a TFT display controller for graphical HMIs, and the 37 communication interfaces (multiple SPI, I2C, UART, USART, Ethernet MAC, SDMMC, USB) that eliminate external bridge chips. Technically, the STM32MP153A line is part of the STM32 ecosystem and boots from external DDR memory (LPDDR/DDR3/DDR3L) and eMMC/NAND/NOR/QSPI flash. The Cortex-M4 shares STMicroelectronics proven STM32 peripheral set, so existing STM32 real-time firmware ports directly, and developers use STM32Cube MX tooling plus the OpenSTLinux distribution. Note that the manufacturer datasheet also covers 800 MHz variants in the family; the STM32MP153AAD3 is specified at 650 MHz per distributor listings. Typical applications include industrial HMI panels driven by the TFT controller, motor control and factory-automation nodes leveraging CAN FD and the M4 coprocessor, IoT gateways running Linux with real-time sensor handling, and building control systems. Design consideration: the TFBGA-257 footprint requires controlled-impedance PCB layout for DDR routing and a careful power tree (VDDCORE, VDD_DDR rails typically supplied by ST PMICs such as STPMIC1); budget a 6-8 layer board for signal integrity. This page synthesizes distributor pricing, family drop-in variants, application guidance, and design notes beyond what the manufacturer datasheet alone provides.

询价 联系我们
STM32MP153CAC3 - Dual Cortex-A7 650MHz + Cortex-M4 MPU | ST
STM32MP153CAC3

STM32MP153CAC3 - Dual Cortex-A7 650MHz + Cortex-M4 MPU | ST

The STMicroelectronics STM32MP153CAC3 is a heterogeneous microprocessor unit (MPU) combining a dual-core Arm Cortex-A7 application processor running at up to 650 MHz with an Arm Cortex-M4 real-time coprocessor running at up to 209 MHz, housed in a 361-ball TFBGA package measuring 12x12 mm and rated for -40C to +125C operation. A microprocessor unit (MPU) is a computing engine that typically runs a full operating system such as Linux or Android, unlike a microcontroller (MCU) which executes bare-metal or RTOS code. Within the embedded hierarchy, the STM32MP1 series occupies the space between application processors and general-purpose MCUs, integrating an MPU-class Linux-capable subsystem and an MCU-class deterministic real-time core on a single die. The family belongs to the broader STM32 ecosystem from STMicroelectronics and shares tooling and peripherals across the STM32 portfolio. Key features of the STM32MP153CAC3 include the dual Cortex-A7 core cluster with symmetric multiprocessing (SMP) support for Linux, a Cortex-M4 coprocessor with dedicated peripherals for hard real-time control, secure boot with hardware cryptographic acceleration, and FD-CAN interfaces for industrial networking. The device pairs with external DDR3/DDR3L/LPDDR2 memory and offers a TFT display controller for human-machine interfaces. Architecturally, the STM32MP153CAC3 leverages a heterogeneous multicore design: the Cortex-A7 subsystem handles rich OS workloads such as HMI graphics, protocol stacks, and edge computing, while the Cortex-M4 services deterministic tasks like motor control and safety loops with microsecond latency. Security features include a true random number generator and cryptographic accelerators supporting secure firmware update chains. Typical applications include industrial automation controllers, smart gateways, human-machine interfaces with TFT touch displays, and IoT edge nodes requiring both Linux-class processing and real-time fieldbus connectivity via FD-CAN. When designing with this device, pay close attention to power-rail sequencing (VDDCORE, VDD, VDDQ_DDR), DDR routing length matching, and thermal dissipation in the 12x12 mm TFBGA361 package; ST reference designs such as the STM32MP15 evaluation and discovery boards document recommended STPMIC power architectures. This page adds value beyond the ST datasheet by consolidating verified distributor specifications, drop-in same-family alternatives, pricing context, and practical engineering design notes in one citable reference.

询价 联系我们
STM32MP157AAC3 - Dual Cortex-A7 650MHz MPU | STMicroelectronics
STM32MP157AAC3

STM32MP157AAC3 - Dual Cortex-A7 650MHz MPU | STMicroelectronics

The STMicroelectronics STM32MP157AAC3 is a dual-core Arm Cortex-A7 microprocessor (MPU) running at up to 650 MHz with an integrated Arm Cortex-M4 real-time coprocessor at 209 MHz, a 3D GPU, and TFT/DSI display support, housed in a 361-ball TFBGA (12 x 12 mm) package. A microprocessor unit (MPU) sits above a microcontroller (MCU) in the embedded hierarchy: it executes full operating systems such as Linux while delegating hard real-time tasks to a companion core. The STM32MP1 series bridges these worlds by combining Linux-class Cortex-A7 application cores with a Cortex-M4 MCU core sharing the same peripherals, allowing developers to reuse STM32 ecosystem tooling. Key features of the STM32MP157AAC3 include 37 communication interfaces, 29 timers, advanced analog peripherals, Arm NEON SIMD acceleration, and Arm TrustZone security. Per ST datasheet highlights, the device supports a 1-Gbps Ethernet (RGMII) interface compliant with IEEE 802.3ab, enabling industrial networking. The 32-Kbyte data cache per core with a 256-Kbyte unified level-2 cache sustains Linux workloads efficiently. Architecturally, the part belongs to the STM32MP1 family (STM32MP157 line, A performance grade, C variant with 3D GPU). Supply voltage ranges from 1.71 V to 3.6 V on its I/O domains, and the operating temperature spans -40C to +125C per distributor parametric data, supporting industrial deployments. Boot options cover eMMC, SD card, NAND/NOR flash, and serial interfaces for flexible storage strategies. Typical applications include industrial HMI panels using the TFT/DSI display pipeline, building automation gateways leveraging the gigabit-capable Ethernet port, and edge nodes where the Cortex-M4 handles deterministic I/O while Linux manages connectivity and user interfaces on the Cortex-A7 pair. A key design consideration is power-supply sequencing: the multi-rail PMIC (such as the STPMIC1) is strongly recommended to enforce the required core-to-IO power-up order, and the 361-ball TFBGA requires controlled-impedance 8-layer PCB fabrication with BGA escape routing. This page synthesizes distributor pricing, drop-in same-family alternatives, and practical design notes not consolidated in the manufacturer datasheet.

询价 联系我们
STM32MP157DAC3 - Dual Cortex-A7 650MHz MPU | STMicroelectronics
STM32MP157DAC3

STM32MP157DAC3 - Dual Cortex-A7 650MHz MPU | STMicroelectronics

The STMicroelectronics STM32MP157DAC3 is a dual-core Arm Cortex-A7 microprocessor (MPU) running at 650 MHz with an integrated Arm Cortex-M4 coprocessor at 209 MHz, housed in a 361-ball TFBGA square package with industrial temperature grade. It belongs to the STM32MP1 series and targets Linux-based embedded systems that also require real-time control. An MPU (microprocessor unit) sits above a microcontroller in the embedded hierarchy: unlike an MCU that runs bare-metal or RTOS firmware from internal flash, an MPU boots a full operating system such as Linux from external DDR memory and storage, while this device uniquely also embeds an STM32-class Cortex-M4 core for hard real-time tasks, bridging the gap between application processors and microcontrollers. Key features include the dual Arm Cortex-A7 cores at 650 MHz for Linux application processing, the Cortex-M4 at 209 MHz for deterministic real-time control, and a rich peripheral set with CAN FD for industrial networking. The STM32MP157 family is documented with up to 37 communication interfaces and 29 timers on higher variants, providing extensive connectivity for industrial designs. Architecturally, the device combines the Arm Cortex-A application domain with an STM32MCU-style peripheral domain, sharing a common ecosystem: developers use the STM32Cube ecosystem, OpenSTLinux distribution, and STM32CubeMX configuration tools. This heterogenous multi-core architecture allows Linux on the A7 cores and bare-metal or RTOS firmware on the M4 core, communicating via OpenAMP/RPMsg inter-processor communication. Typical applications include industrial HMI and touch panels, building automation controllers, gateways with CAN FD and industrial Ethernet, and medical or test instruments needing both a graphical Linux interface and real-time motor or sensor control loops. A key design consideration is memory: the MPU has no internal flash for code execution, so the BOM must include external DDR3/DDR3L SDRAM and a boot device (eMMC, NAND, SD, or QSPI), and power-tree design must respect the multiple supply rails required by the TFBGA package. This page synthesizes distributor sourcing data, drop-in alternative analysis within the STM32MP157 family, and practical design notes not consolidated in the manufacturer datasheet.

询价 联系我们
STM32MP157FAD2 - Dual Cortex-A7 800MHz MPU TFBGA257 | ST
STM32MP157FAD2

STM32MP157FAD2 - Dual Cortex-A7 800MHz MPU TFBGA257 | ST

The STMicroelectronics STM32MP157FAD2 is a dual-core Arm Cortex-A7 32-bit microprocessor (MPU) running at up to 800 MHz, paired with an Arm Cortex-M4 coprocessor at 209 MHz, a 3D GPU, and a TFT/DSI display subsystem, housed in a 257-ball TFBGA package measuring 10 x 10 mm. An MPU (microprocessor unit) sits at the top of the embedded processing hierarchy: unlike a bare MCU, it boots a full operating system (Linux or Android via OpenSTLinux) while delegating deterministic, real-time tasks to a companion Cortex-M core. This heterogeneous architecture lets one chip run HMI, networking, and application code on Linux while the Cortex-M4 handles motor control, low-power I/O, or safety loops. Key features of the STM32MP157FAD2 include 37 communication interfaces (including multiple SPI, I2C, UART, CAN-FD, Ethernet MAC, and USB), 29 timers, advanced analog peripherals (12-bit ADCs, DAC, and comparators), and a Vivante 3D GPU with TFT/DSI display output for rich graphical HMIs. The F variant is the open (non-crypto-enabled) member of the STM32MP157 family, sharing the silicon and pinout of the C variant. Architecturally, the device combines the two Cortex-A7 cores with 32-bit address space, L1 caches, and an interconnect bridging to on-chip SRAM and external DDR3/LPDDR2/LPDDR3 memory. The Cortex-M4 shares peripherals with the A7 domain, enabling tightly coupled split workloads using STM32Cube ecosystem tools. Typical applications include industrial HMI panels, building automation controllers, IoT gateways, and medical/portable devices that need a display, rich connectivity, and a real-time coprocessor in one footprint. For design, plan the 10 x 10 mm TFBGA257 land pattern (0.5/0.65 mm ball pitch per ST layout guidelines), DDR routing, and power-tree early; boot media (eMMC/NAND/SD) selection and secure-boot configuration should be finalized before PCB spin. This page synthesizes distributor data, same-family drop-in alternatives, and practical design notes not found in the ST datasheet.

询价 联系我们
STM32MP157FAD7 - Dual Cortex-A7 + M4 MPU | STMicroelectronics
STM32MP157FAD7

STM32MP157FAD7 - Dual Cortex-A7 + M4 MPU | STMicroelectronics

The STMicroelectronics STM32MP157FAD7 is a high-performance heterogeneous microprocessor (MPU) that combines a dual-core Arm Cortex-A7 application processor running up to 650 MHz with a Cortex-M4 real-time core running at 209 MHz. This device is part of the STM32MP1 series, designed for industrial, IoT, and embedded applications requiring both rich operating system support (Linux/Android) and deterministic real-time control. The STM32MP157FAD7 is housed in a 448-pin LFBGA package (18x18 mm, 0.8 mm pitch) and operates over a temperature range of -40°C to +125°C. A microprocessor (MPU) is a complete processing unit that integrates one or more CPU cores, memory interfaces, and peripheral controllers on a single chip, distinct from a microcontroller (MCU) which typically has embedded flash and simpler peripherals. The STM32MP157FAD7 belongs to the class of heterogeneous multicore MPUs, which combine application-class cores (Cortex-A7) with a real-time core (Cortex-M4) to handle both high-level operating systems and time-critical tasks. This architecture enables a single chip to replace a multi-chip solution, reducing system cost and complexity. Key features include a rich set of connectivity options: dual Ethernet (10/100/1000 Mbps), USB 2.0 OTG, multiple UARTs, SPI, I2C, CAN FD, and SDMMC interfaces. It also integrates a 3D GPU (OpenGL ES 2.0), a 2D graphics accelerator, and a display controller supporting up to 1080p resolution, making it suitable for human-machine interface (HMI) applications. The device supports external DDR3/DDR3L/LPDDR2 memory with a 16-bit bus, and includes a comprehensive security suite with cryptographic accelerators and secure boot. The STM32MP157FAD7 is built on a 28nm FD-SOI process, offering a balance of performance and power efficiency. The dual Cortex-A7 cores provide up to 650 MHz each, while the Cortex-M4 runs at 209 MHz, enabling real-time control. The device includes a memory protection unit (MPU) for each core, ensuring isolation between the application and real-time domains. The power management unit (PMU) supports multiple low-power modes, including standby and shutdown, with wake-up sources from GPIO, RTC, and Ethernet. Typical applications include industrial PLCs, smart gateways, medical monitoring devices, and advanced HMI systems. The combination of high-performance processing, rich connectivity, and real-time capabilities makes it ideal for edge computing nodes that require both Linux-based applications and deterministic control. For example, in a smart factory, the STM32MP157FAD7 can run a Linux-based HMI while simultaneously controlling a robotic arm via the Cortex-M4 core. When designing with this device, careful attention must be paid to power sequencing and decoupling. The device requires multiple supply rails (VDD, VDD_IO, VDD_3V3, etc.) with specific power-up sequences. A dedicated PMIC (such as the STPMIC1) is recommended to manage the power rails and ensure proper sequencing. Additionally, the DDR memory interface requires careful PCB layout with controlled impedance and length matching to ensure signal integrity at high speeds.

询价 联系我们
STM32MP257F - Dual Cortex-A35 1.5GHz MPU | STMicroelectronics | Industrial IoT
STM32MP257F

STM32MP257F - Dual Cortex-A35 1.5GHz MPU | STMicroelectronics | Industrial IoT

The STMicroelectronics STM32MP257F is a high-performance heterogeneous microprocessor (MPU) combining a dual-core Arm Cortex-A35 64-bit application processor running at up to 1.5 GHz and a single Cortex-M33 real-time core at up to 400 MHz. It is designed for industrial IoT, smart factory, and edge computing applications, integrating advanced security features, rich connectivity, and a comprehensive set of peripherals, making it a versatile platform for Linux-based and real-time systems. A microprocessor (MPU) is a complete computing engine that typically runs a full operating system like Linux, in contrast to a microcontroller (MCU) which runs bare-metal or RTOS. The STM32MP257F belongs to the STM32MP2 series, which is part of the broader STM32 family of 32-bit Arm-based devices. This MPU sits at the top of the STM32 performance hierarchy, offering the processing power of an application processor with the real-time capabilities of a microcontroller core. Key features include a dual-core Cortex-A35 running up to 1.5 GHz, a Cortex-M33 at 400 MHz, and a dedicated 3D GPU for graphical user interfaces. It supports up to 2 GB of DDR4/LPDDR4 memory, providing ample bandwidth for data-intensive applications. The device also includes a hardware cryptographic accelerator, secure boot, and a TrustZone architecture for robust security. Technically, the STM32MP257F is built on a 28nm FD-SOI process, offering a balance of performance and power efficiency. It features a rich set of peripherals including multiple Ethernet ports (up to 2x GbE with TSN), USB 2.0/3.0, CAN-FD, and a wide range of serial interfaces. The dual-core architecture allows asymmetric multiprocessing (AMP) where the A35 cores run Linux while the M33 core handles real-time tasks, enabling a single-chip solution for complex systems. Typical applications include industrial PLCs, HMI panels, smart gateways, and edge AI devices. The combination of high-performance processing, real-time control, and rich connectivity makes it ideal for Industry 4.0 deployments where deterministic control and data processing are required. When designing with the STM32MP257F, careful attention must be paid to power sequencing and thermal management. The device requires multiple supply rails (1.8V, 3.3V, and core voltage) with proper sequencing to avoid latch-up. A thermal solution is recommended for sustained operation at maximum frequency, especially in enclosed industrial enclosures.

询价 联系我们
STM32MP257FAE3 - Dual Cortex-A7 + M4 MPU | STMicroelectronics
STM32MP257FAE3

STM32MP257FAE3 - Dual Cortex-A7 + M4 MPU | STMicroelectronics

The STMicroelectronics STM32MP257FAE3 is a high-performance heterogeneous microprocessor (MPU) combining a dual-core Arm Cortex-A7 application processor and a Cortex-M4 microcontroller core in a single device. It is designed for industrial and embedded applications requiring both rich operating system support (Linux/Android) and real-time control. The device integrates advanced security features, rich connectivity, and a comprehensive set of peripherals, making it a versatile platform for a wide range of products. A microprocessor (MPU) is a general-purpose computing unit that executes complex operating systems and application software, typically requiring external memory (DDR, NAND, NOR) and storage. In contrast, a microcontroller (MCU) integrates memory, peripherals, and a simpler core for real-time, deterministic tasks. The STM32MP257FAE3 belongs to the STM32MP2 series, which is part of the broader STM32 family of 32-bit microcontrollers and microprocessors. This device bridges the gap between MCUs and high-end application processors, offering the best of both worlds: the real-time responsiveness of an MCU and the processing power of an MPU. Key features of the STM32MP257FAE3 include a dual-core Arm Cortex-A7 running up to 1.2 GHz, a Cortex-M4 core at 800 MHz, and a comprehensive set of peripherals including multiple UARTs, SPI, I2C, USB 2.0, Ethernet, and camera interfaces. It supports up to 4 GB of external DDR4/LPDDR4 memory and features a rich set of security functions such as secure boot, cryptographic accelerators, and a TrustZone-enabled architecture. The device is available in a TFBGA package with 448 balls, offering a compact footprint for space-constrained designs. From a technical depth perspective, the STM32MP257FAE3 leverages ST's advanced 28nm FD-SOI process technology, which provides low power consumption and high performance. The heterogeneous architecture allows for efficient task partitioning: the Cortex-A7 cores handle high-level operating systems and complex algorithms, while the Cortex-M4 core handles real-time control and low-latency I/O. The device also includes a dedicated GPU for graphics acceleration, making it suitable for human-machine interface (HMI) applications. Typical applications include industrial automation, smart gateways, medical devices, and consumer electronics. In industrial automation, the STM32MP257FAE3 can serve as the central controller for PLCs, robotics, and vision systems, leveraging its real-time capabilities and rich connectivity. In smart gateways, it can aggregate data from multiple sensors and protocols, providing edge computing and cloud connectivity. The device's security features make it ideal for secure payment terminals and IoT devices requiring secure boot and encrypted communication. When designing with the STM32MP257FAE3, careful attention must be paid to power supply sequencing and decoupling. The device requires multiple voltage rails (1.8V, 3.3V, and core voltage) with proper sequencing to ensure reliable operation. A well-designed PCB with adequate ground planes and decoupling capacitors is essential to minimize noise and ensure signal integrity, especially for high-speed interfaces like DDR and Ethernet.

询价 联系我们
STM32N645VGT6 - 800MHz Arm Cortex-M55 MCU | STMicroelectronics
STM32N645VGT6

STM32N645VGT6 - 800MHz Arm Cortex-M55 MCU | STMicroelectronics

The STMicroelectronics STM32N645VGT6 is a high-performance microcontroller based on the Arm Cortex-M55 core, operating at up to 800 MHz. It is part of the STM32N6 series, designed for edge AI and advanced signal processing applications. The device integrates 4 MB of flash memory and 1.6 MB of SRAM, along with a Neural Processing Unit (NPU) for accelerated machine learning inference. It is housed in a 100-pin LQFP package (LQFP100) with a 14x14 mm body and 0.5 mm pitch, suitable for surface-mount assembly. What is a microcontroller? A microcontroller (MCU) is a compact integrated circuit designed to govern a specific operation in an embedded system. It contains a processor core, memory (RAM and flash), and programmable input/output peripherals on a single chip. Microcontrollers are the backbone of embedded systems, ranging from simple household appliances to complex industrial automation. The STM32N645VGT6 belongs to the STM32 family, which is a broad portfolio of 32-bit microcontrollers based on Arm Cortex cores, offering scalability from low-power to high-performance variants. Within the hierarchy, it sits as a high-performance MCU with integrated AI acceleration, bridging the gap between traditional MCUs and application processors. Key features of the STM32N645VGT6 include the Arm Cortex-M55 core with Arm Helium technology for DSP and ML performance, a dedicated NPU delivering up to 600 GOPS for edge AI inference, and a rich set of connectivity options including Ethernet, USB, CAN-FD, and multiple SPI/I2C/UART interfaces. The device also features advanced security with TrustZone, cryptographic accelerators, and secure boot. With 4 MB of flash and 1.6 MB of SRAM, it can handle complex applications without external memory in many cases. Technically, the STM32N645VGT6 leverages the Cortex-M55 architecture, which introduces Armv8.1-M mainline extensions, including M-profile Vector Extension (MVE) for efficient DSP and ML workloads. The integrated NPU offloads neural network inference from the CPU, enabling real-time AI applications with lower power consumption compared to CPU-only processing. The device operates over a supply voltage range of 1.71V to 3.6V and supports an ambient temperature range of -40°C to +85°C (industrial grade). Typical applications include smart home devices, industrial predictive maintenance, vision-based quality inspection, voice-controlled systems, and battery-powered IoT edge nodes. The combination of high CPU performance, NPU, and rich peripherals makes it suitable for applications that require on-device AI processing without cloud connectivity. When designing with this device, ensure adequate decoupling on all power supply pins and follow the layout guidelines in the datasheet for high-speed interfaces. The NPU requires careful power sequencing and thermal management, especially when running sustained inference workloads. Use the STM32CubeMX tool for pin configuration and peripheral initialization to accelerate development.

询价 联系我们
STM32N645ZGT6 - 800MHz Cortex-M55 MCU with 4MB Flash | STMicroelectronics
STM32N645ZGT6

STM32N645ZGT6 - 800MHz Cortex-M55 MCU with 4MB Flash | STMicroelectronics

The STMicroelectronics STM32N645ZGT6 is a high-performance Arm Cortex-M55 based microcontroller with an operating frequency of up to 800 MHz, delivering exceptional compute capability for advanced embedded applications. It integrates 4 MB of flash memory and 2.5 MB of SRAM, along with a rich set of peripherals including Ethernet, USB, and advanced security features. The device is housed in a 144-pin LQFP package (LQFP144, 20x20 mm), making it suitable for space-constrained yet performance-demanding designs. What is a microcontroller? A microcontroller (MCU) is a compact integrated circuit designed to govern a specific operation in an embedded system. It contains a processor core, memory (flash and SRAM), and programmable input/output peripherals on a single chip. Microcontrollers are the brain of countless electronic devices, from automotive engine control units to industrial robots and IoT sensors. In the system hierarchy, a microcontroller sits between a microprocessor (which requires external memory and peripherals) and a system-on-chip (SoC, which integrates more complex subsystems like GPUs). The STM32N645ZGT6 belongs to the STM32N6 series, which is STMicroelectronics' flagship high-performance MCU family, positioned above the STM32H7 series in terms of raw processing power and AI acceleration capabilities. Key features of the STM32N645ZGT6 include an Arm Cortex-M55 core with Arm Helium technology for DSP and AI workloads, a Neural Processing Unit (NPU) capable of up to 600 GOPS for on-device machine learning, and a comprehensive security suite including TrustZone, cryptographic accelerators, and secure boot. The device supports a wide supply voltage range of 1.71V to 3.6V and operates over a temperature range of -40°C to +125°C, making it suitable for industrial and automotive environments. It also features a rich set of connectivity options, including 10/100 Ethernet MAC, USB 2.0 OTG, multiple SPI, I2C, UART, and CAN-FD interfaces. From a technical architecture perspective, the STM32N645ZGT6 leverages a dual-core design with the Cortex-M55 and an independent power management unit, enabling efficient handling of real-time tasks and AI inference simultaneously. The inclusion of the NPU offloads intensive neural network computations from the CPU, freeing it for control and communication tasks. The device also incorporates advanced memory protection and error correction codes (ECC) on both flash and SRAM, enhancing reliability in safety-critical applications. Typical applications for the STM32N645ZGT6 include industrial automation and robotics, where its high-speed processing and real-time control capabilities are essential; smart home and IoT gateways, leveraging its connectivity and AI features for edge intelligence; and medical devices, where its security and reliability are paramount. The device's ability to run complex algorithms locally reduces latency and bandwidth requirements, making it ideal for edge AI applications. When designing with the STM32N645ZGT6, engineers should pay careful attention to power supply decoupling, using multiple 100nF and 10uF capacitors close to the power pins to ensure stable operation at high frequencies. The device's high-speed interfaces require careful PCB layout to maintain signal integrity, including controlled impedance traces and proper grounding. Additionally, the thermal design must account for the power dissipation of the core and NPU, potentially requiring a heatsink or forced airflow in high-load scenarios.

询价 联系我们
STM32N657VGT6 - 600MHz Cortex-M7 MCU with 2MB Flash | STMicroelectronics
STM32N657VGT6

STM32N657VGT6 - 600MHz Cortex-M7 MCU with 2MB Flash | STMicroelectronics

The STMicroelectronics STM32N657VGT6 is a high-performance Arm Cortex-M7 microcontroller operating at up to 600 MHz, delivering exceptional compute capability for advanced embedded applications. It features 2 MB of flash memory and 1.5 MB of SRAM, along with a rich set of peripherals including multiple communication interfaces, advanced timers, and a comprehensive security suite. The device is housed in a 100-pin LQFP package (LQFP100), providing a compact yet powerful solution for industrial, consumer, and IoT designs. What is a microcontroller? A microcontroller (MCU) is a compact integrated circuit designed to govern a specific operation in an embedded system. It integrates a processor core, memory (flash and SRAM), and programmable input/output peripherals on a single chip. Microcontrollers are the brains of countless devices, from automotive engine control units to smart home sensors. In the system hierarchy, the STM32N657VGT6 sits at the application processor level, capable of running complex algorithms and real-time control tasks, often serving as the central processing unit in a system-on-chip (SoC) architecture. Key features of the STM32N657VGT6 include a 600 MHz Arm Cortex-M7 core with double-precision floating-point unit (FPU), 2 MB of flash memory, 1.5 MB of SRAM, and a comprehensive set of peripherals. It supports a wide range of communication interfaces including Ethernet, USB 2.0, CAN-FD, SPI, I2C, UART, and SDMMC. The device also integrates advanced security features such as a hardware cryptographic accelerator, true random number generator (TRNG), and secure boot, making it suitable for secure IoT applications. The operating temperature range is -40°C to +125°C, and the supply voltage is 1.71V to 3.6V. Technically, the STM32N657VGT6 is built on a high-performance process technology, enabling 600 MHz operation while maintaining low power consumption. The Cortex-M7 core includes an instruction cache, data cache, and a memory protection unit (MPU), enhancing real-time performance and reliability. The device supports external memory interfaces, allowing expansion of code and data storage. The rich peripheral set is complemented by a flexible clock tree, multiple power modes, and a comprehensive set of development tools, including the STM32Cube ecosystem. Typical applications include industrial control systems, motor control, advanced human-machine interfaces (HMI), IoT gateways, and edge AI devices. The high clock speed and FPU make it ideal for digital signal processing (DSP) tasks, while the security features enable secure firmware updates and data protection. The device is also suitable for audio processing, smart home hubs, and robotics. When designing with the STM32N657VGT6, ensure adequate decoupling on all power supply pins and a proper ground plane for high-speed signal integrity. The device requires a stable clock source, typically a 25 MHz crystal for Ethernet, and careful layout of the high-speed interfaces to minimize EMI. The STM32CubeMX tool can be used to configure the device and generate initialization code, simplifying development.

询价 联系我们