微控制器

产品（18756)

ATSAML11D14A-MF - 32MHz Cortex-M23 MCU 16KB Flash | Microchip
ATSAML11D14A-MF

ATSAML11D14A-MF - 32MHz Cortex-M23 MCU 16KB Flash | Microchip

The Microchip ATSAML11D14A-MF is a 32-bit ARM Cortex-M23 microcontroller featuring chip-level ARM TrustZone technology, 16KB of Flash, 8KB of SRAM, and an integrated crypto subsystem, packaged in a 24-pin VQFN (4x4 mm). It is part of Microchip's SAM L11 family, recognized as the industry's first Cortex-M23 MCU with built-in TrustZone for hardware-isolated secure and non-secure code execution. A microcontroller (MCU) is a single-chip computer that integrates a CPU core, memory, and programmable peripherals. The ARM Cortex-M23 is an ARMv8-M Baseline processor core designed for energy-efficient embedded applications. The SAM L11 belongs to the low-power microcontroller hierarchy (MCU -> ARM Cortex-M MCU -> low-power MCU -> secure MCU), making it suitable for battery-operated and IoT edge devices where active current and sleep current directly determine battery life. Key specifications of the ATSAML11D14A-MF include a 32 MHz maximum CPU clock, less than 25 uA/MHz active current consumption, and less than 100 nA in sleep mode. It features 16KB Flash and 8KB SRAM, a 12-bit ADC, an enhanced Peripheral Touch Controller (PTC) for capacitive touch sensing, and secure key storage with chip-level tamper resistance. The 24-VQFN package enables compact PCB layouts for space-constrained designs. The SAM L11 architecture pairs the Cortex-M23 core with Microchip's TrustZone-aware secure boot, secure bootloader, and hardware crypto accelerators (AES, SHA, TRNG). This dual-world execution model allows OEMs to isolate IP-protected firmware from user application code without external secure elements. The crypto block performs symmetric, hashing, and random-number operations directly on-chip, reducing BOM cost and attack surface in IoT endpoints. Typical applications include IoT end nodes with secure firmware updates, low-power wireless sensor nodes, smart meters, secure access control, wearable health monitors, and battery-powered HMI products with capacitive touch. The combination of TrustZone and on-chip crypto accelerates PSA Certified Level 1 compliance for connected products. Designers should pay attention to the MCU's decoupling network: place 100 nF and 1 uF capacitors close to the VDD pin pair, and follow Microchip's PCB layout guidelines for the 24-VQFN exposed pad for thermal dissipation. The integrated PTC requires specific sensor trace routing; refer to the device datasheet's touch section for guard-ring and ground-fill recommendations. This page synthesizes current distributor pricing, same-family drop-in alternatives from the SAM L11 portfolio, and practical design notes drawn from Microchip's published documentation and application notes.

询价 联系我们
ATSAML11D14A-MFT - 32MHz Cortex-M23 MCU 16KB Flash 24-VQFN | Microchip
ATSAML11D14A-MFT

ATSAML11D14A-MFT - 32MHz Cortex-M23 MCU 16KB Flash 24-VQFN | Microchip

The Microchip Technology ATSAML11D14A-MFT is a 32-bit ARM Cortex-M23 microcontroller with TrustZone-M security, featuring 16 KB of Flash and 8 KB of SRAM, operating at up to 32 MHz and housed in a 24-pin VQFN (4x4 mm) package. It is part of the SAM L11 family, the industry's first Cortex-M23 MCU with chip-level Arm TrustZone technology, secure key storage, and chip-level tamper resistance. According to the Microchip product page, the device consumes less than 25 uA/MHz in active mode and less than 100 nA in sleep mode, making it the lowest-power Cortex-M23 in its class. A microcontroller (MCU) is a single-chip computer that integrates a CPU core, program memory, data memory, and a rich set of peripherals such as timers, ADC, communication interfaces (I2C, SPI, USART), and GPIO. The SAM L11 family belongs to the broader category of 32-bit embedded microcontrollers, which sit between 8/16-bit MCUs (lower performance, simpler peripherals) and higher-end microprocessors/MPUs (with external memory and complex OS support). Cortex-M23 specifically targets ultra-low-power secure IoT nodes, combining the energy efficiency of Cortex-M0+ with the optional TrustZone isolation of Cortex-M33 at a lower gate count. Key features of the ATSAML11D14A-MFT include hardware crypto accelerators (AES, SHA, True Random Number Generator), secure boot with immutable root key storage, up to 16 GPIOs, a 12-bit ADC, multiple SERCOM peripherals configurable as I2C/SPI/USART, and a 125 C industrial-grade operating temperature range (denoted by the 'M' in the part suffix). The 'F' suffix indicates Tape and Reel packaging, while 'T' designates the 125 C maximum junction temperature. Architecturally, the SAM L11 implements a dual-bank Flash with secure and non-secure regions, TrustZone-M for hardware-enforced isolation, and a Secure Firmware Update mechanism. The 32 MHz Cortex-M23 core delivers 0.93 DMIPS/MHz with a single-cycle multiplier, executing Thumb-2 instructions. Integrated peripherals include a 32-channel Event System, RTC, and low-power SleepWalking modes that wake peripherals selectively. Typical applications include secure IoT sensor nodes, wireless meter endpoints, smart locks and access control, wearables with secure identity, secure payment terminals, industrial sensor hubs, and battery-powered edge devices requiring over-the-air firmware updates with cryptographic authentication. The chip-level tamper detection makes it well-suited for point-of-sale terminals and anti-counterfeiting use cases. When designing with this part, carefully plan the secure/non-secure memory partition early because TrustZone boundaries affect linker scripts and library linking. Ensure the supply decoupling network uses at least one 100 nF capacitor placed within 2 mm of each VDD pin to meet the 32 MHz operation's noise budget. This page synthesizes distributor pricing, drop-in package-compatible alternatives from the same SAM L11 family, and practical design notes not consolidated in any single manufacturer document.

询价 联系我们
ATSAML11D14A-MU - 32MHz Cortex-M23 MCU w/ TrustZone | 24-VQFN
ATSAML11D14A-MU

ATSAML11D14A-MU - 32MHz Cortex-M23 MCU w/ TrustZone | 24-VQFN

The Microchip Technology ATSAML11D14A-MU is an ultra-low-power 32-bit ARM Cortex-M23 microcontroller featuring ARM TrustZone technology, 16KB of Flash, 8KB of SRAM, and integrated hardware crypto acceleration, housed in a 24-pin VQFN (4x4 mm) package with exposed pad. It operates from a 1.62V to 3.63V supply and runs at up to 32 MHz, achieving less than 25 uA/MHz in active mode and under 100 nA in sleep mode per the manufacturer product page. A microcontroller (MCU) is a System-on-Chip that integrates a CPU core, program memory (Flash), working memory (SRAM), and programmable peripherals into a single device. The Cortex-M23 is an ARMv8-M baseline core that introduces TrustZone for Cortex-M, enabling hardware-isolated secure and non-secure code execution. The ATSAML11 family belongs to the SAM family of 32-bit microcontrollers from Microchip, positioned under the broader ARM Cortex-M hierarchy and serving low-power, security-focused IoT endpoints. Key features of the ATSAML11D14A-MU include ARM TrustZone-M hardware isolation, secure key storage, chip-level tamper resistance (Active Tamper), 16KB Flash / 8KB SRAM, a 32 MHz maximum CPU clock, an integrated hardware AES/SHA accelerator, 17 programmable I/O pins, and selectable peripherals including SERCOM (I2C/SPI/UART), ADC, DAC, timers, and RTC. The part is rated for the industrial temperature range (-40C to +85C) and is supplied in a 24-VQFN 4x4 mm package. The ATSAML11D14A-MU targets deployments where deterministic real-time response, low power, and on-chip security are all required simultaneously. TrustZone-M allows developers to partition firmware into secure and normal worlds for IP protection, secure boot, and key management. Combined with hardware crypto and tamper detection, the device is engineered for connected endpoints that must defend against physical and remote attacks without burdening the application CPU. Typical applications include secure IoT endpoints, sensor nodes with secure firmware, smart meters, asset tracking, access control peripherals, and battery-powered industrial sensors. The combination of TrustZone-M plus less than 100 nA sleep current makes it well-suited to devices that spend long intervals dormant and wake only to perform short authenticated tasks. When designing in the ATSAML11D14A-MU, plan the secure/non-secure memory map early; TrustZone-M boundaries defined in the linker script are easier to design up front than to retrofit. Decoupling: place one 100 nF X7R plus one 1 uF X7R close to VDDIN/VDDIO, and provide a clean ground return under the exposed pad which must be soldered to the PCB for thermal and electrical reasons. This page synthesizes distributor pricing, secure-MCU design notes, parametric comparisons versus other SAM L11 pin-compatibles, and TradePulse-style drop-in alternatives - information engineers need that a raw datasheet PDF does not provide on a single page.

询价 联系我们
ATSAML11D14A-MUT - 32MHz Cortex-M23 TrustZone MCU 16KB Flash | Microchip
ATSAML11D14A-MUT

ATSAML11D14A-MUT - 32MHz Cortex-M23 TrustZone MCU 16KB Flash | Microchip

The Microchip Technology ATSAML11D14A-MUT is an ultra-low-power 32-bit ARM Cortex-M23 microcontroller with integrated ARM TrustZone technology, 16KB Flash, 8KB SRAM, and 2KB Data Flash in a 24-pin VQFN (4x4 mm) package. Operating from 1.62V to 3.63V at up to 32MHz, it delivers 2.62 CoreMark/MHz and up to 31 DMIPS while consuming less than 25 µA/MHz in active mode and less than 100 nA in sleep mode. It is the industry's first Cortex-M23 MCU with chip-level security and TrustZone for root-of-trust designs. A microcontroller (MCU) is a single-chip computer that integrates a processor core, non-volatile program memory (Flash), volatile working memory (SRAM), and a rich set of peripherals including timers, communication controllers, and analog blocks. Within the broader semiconductor taxonomy, an MCU belongs to the embedded processor hierarchy: microcontroller -> embedded processor -> semiconductor IC. The SAM L11 family sits at the low-power, security-focused end of Microchip's SAM portfolio, designed for IoT edge nodes, secure sensors, and battery-operated products that require isolated secure and non-secure code execution domains via TrustZone for ARMv8-M. Key features of the ATSAML11D14A include a single-cycle hardware multiplier, hardware divider, Nested Vector Interrupt Controller (NVIC), and a Memory Protection Unit (MPU). Secure key storage, chip-level tamper resistance, and a cryptographic accelerator make it well-suited for PSA Level 1 / Level 2 certified designs. Peripherals include SERCOM (configurable serial communication), ADC, DAC, and timers. The device operates over the industrial -40 °C to +85 °C temperature range, suiting consumer, industrial, and metering environments. Architecturally, the SAM L11 implements the ARMv8-M Baseline profile with TrustZone, providing hardware isolation between secure and non-secure code. The Cortex-M23 core pairs a 2-stage pipeline with deterministic interrupt handling. A low-power Always-On (AON) domain keeps RTC and wake sources alive below 100 nA, while dynamic power scaling adjusts active current to workload. Integrated op amps and a 12-bit 1 Msps ADC ease analog front-end designs. Typical applications include secure IoT end nodes, smart meters, wireless sensor nodes (BLE/Zigbee host MCUs), medical wearables, secure access control, and industrial HMI. Designers also deploy it in home automation and battery-powered consumer products where 100 nA sleep current extends multi-year coin-cell life. When designing with this part, ensure that the secure/non-secure memory partitioning and linker configuration align with the TrustZone model — firmware written without the secure attribution scheme loses the device's primary security benefit. Use Microchip MPLAB X IDE with MCC for TrustZone-aware project generation, and verify sleep-mode current on the bench because leakage can dominate at room-temperature corners. This page synthesizes distributor pricing, drop-in alternatives from the same SAM L11 family and qualified cross-brand equivalents, and practical design notes not found in the manufacturer datasheet.

询价 联系我们
ATSAML11D14A-YFT - ARM Cortex-M23 MCU 16KB Flash | Microchip
ATSAML11D14A-YFT

ATSAML11D14A-YFT - ARM Cortex-M23 MCU 16KB Flash | Microchip

The Microchip Technology ATSAML11D14A-YFT is an ARM Cortex-M23 based SAM L11 microcontroller delivering 32 MHz CPU performance with 16 KB Flash and 8 KB SRAM in a 24-pin SSOP package. It operates from 1.62 V to 3.63 V supply, integrates ARM TrustZone technology, secure key storage, and chip-level tamper resistance, and is rated for the -40 C to +125 C industrial temperature range. Background knowledge: A microcontroller (MCU) is a single-chip computer that integrates a CPU core, volatile memory (SRAM), non-volatile program memory (Flash), and a rich set of peripheral IPs into one package. The ARM Cortex-M23 core is an Armv8-M baseline architecture targeted at deeply embedded, energy-constrained, and security-sensitive IoT endpoints. Microcontrollers fall within the broader category hierarchy of microcontroller -> embedded processor -> semiconductor -> integrated circuit. Key features include 16 KB of Flash, 8 KB of SRAM, an active current below 25 uA/MHz, sleep current below 100 nA, and on-chip crypto accelerators supporting AES, SHA, and True Random Number Generation. TrustZone for ARMv8-M isolates secure firmware from normal firmware, and the part supports secure boot with immutable root-of-trust. Architecturally the device uses a single-core 32-bit Cortex-M23 pipeline with hardware single-cycle multiplier and a Nested Vectored Interrupt Controller (NVIC). Peripherals include multiple SERCOM (serial communication) instances configurable as UART, SPI, or I2C, 12-bit ADC, 10-bit DAC, comparators, timers, and RTC. The 24-pin SSOP package is industry-standard and enables hand-solderable prototypes alongside volume SMD assembly. Typical applications include IoT end nodes with secure firmware update, smart energy metering, medical sensors requiring HIPAA-grade data isolation, secure industrial HMI panels, building automation controllers, and battery-powered wearable devices. The combination of TrustZone and ultra-low sleep current makes it ideal for always-on edge devices. When designing with this part, place a 100 nF decoupling capacitor as close as possible to every VDD pin and follow the SAM L11 hardware design checklist for the 24-pin SSOP. Choose the boot mode strap resistors carefully because TrustZone secure-boot configuration is latched at reset. This page synthesizes distributor pricing, drop-in SAM L11 alternatives, and practical design notes not found in the manufacturer datasheet alone.

询价 联系我们
ATSAML11D14A-YU - 32MHz Cortex-M23 MCU, 16KB Flash, TrustZone-M | Microchip
ATSAML11D14A-YU

ATSAML11D14A-YU - 32MHz Cortex-M23 MCU, 16KB Flash, TrustZone-M | Microchip

The Microchip ATSAML11D14A-YU is a 32-bit ARM Cortex-M23 microcontroller featuring chip-level security via ARM TrustZone-M technology, 16KB of Flash, and 8KB of SRAM in a 24-pin SSOP package. It runs at up to 32 MHz with an active-mode current under 25 uA/MHz and a sleep-mode current below 100 nA, making it one of the lowest-power Cortex-M23 devices available. According to the Microchip product page, the device integrates a peripheral touch controller (PTC), SERCOM, ADC, DAC, OPAMP, and analog comparators on-chip. A microcontroller (MCU) is a single-chip computer containing a CPU core, program memory (Flash), data memory (SRAM), and a wide range of peripherals. Within the MCU hierarchy, the ATSAML11D14A-YU belongs to the Cortex-M23 sub-family (low-power entry-level core in the Cortex-M lineup), within the SAM L family (low-power microcontrollers), within the broader SAM family of Microchip 32-bit ARM microcontrollers, which itself sits under the wider category of embedded microcontrollers and semiconductors. Key security and integration features include secure key storage, chip-level tamper resistance, ARM TrustZone-M hardware isolation, hardware cryptographic acceleration, and a peripheral touch controller. The 24-SSOP package supports industrial temperature ranges and is drop-in compatible with other SAM L11 family variants in the same pinout, allowing PCB reuse across memory-size or feature-set changes. The architecture combines the energy-efficiency of Cortex-M23 with hardware-level isolation between secure and non-secure code regions. TrustZone-M enables designers to isolate firmware IP, cryptographic keys, and secure boot routines from application code, reducing firmware attack surface in IoT endpoints. The integrated PTC and analog peripherals remove the need for external touch ASICs or op-amps in many designs. Typical applications include secure IoT endpoints, smart-home sensors, low-power wireless sensor nodes, secure token devices, tamper-resistant industrial controllers, and consumer products requiring on-chip touch. The combination of low active current, deep-sleep sub-100 nA current, and TrustZone-M makes it a strong fit for battery-operated, security-conscious products. When designing with this MCU, follow the Microchip SAM L11 datasheet's startup and TrustZone-M configuration flow, and budget for the secure boot region when partitioning Flash between secure and non-secure code. This page synthesizes distributor pricing, drop-in SAM L11 alternatives, and practical design notes not found in the standalone manufacturer datasheet.

询价 联系我们
ATSAML11D14A-YUT - 32MHz Cortex-M23 MCU, 16KB Flash, TrustZone | Microchip
ATSAML11D14A-YUT

ATSAML11D14A-YUT - 32MHz Cortex-M23 MCU, 16KB Flash, TrustZone | Microchip

The Microchip Technology ATSAML11D14A-YUT is an ultra-low-power 32-bit ARM Cortex-M23 microcontroller with 16KB Flash, 8KB SRAM, and integrated ARM TrustZone technology, housed in a 24-pin SSOP package. It operates from 1.62V to 3.63V with a 32MHz core clock and is rated for industrial temperature ranges (-40C to +85C). A microcontroller (MCU) is a single-chip computer containing a processor core, program memory (Flash), data memory (SRAM), and a rich set of peripherals. The Cortex-M23 is an ARMv8-M baseline core optimized for energy efficiency and deterministic interrupt response. Within the broader taxonomy, the SAM L11 sits at: ARM Cortex-M23 -> ARMv8-M Mainline -> 32-bit MCU -> microcontroller -> embedded processor -> semiconductor. The L11 is Microchip's first MCU family to ship native ARM TrustZone hardware isolation for the Cortex-M class, a feature typically reserved for higher-end Cortex-M33 parts. Key features include chip-level tamper detection, secure key storage, a true random number generator (TRNG), secure boot with immutable root-of-trust, and up to 22 GPIO. Power consumption is below 25 uA/MHz in active mode and below 100 nA in sleep (retention) mode, making it one of the lowest-power Cortex-M23 devices available as of 2026. The device integrates an 8-channel 12-bit ADC, two I2C, two SPI, one I2S, up to three UART/USART, and a full-speed USB 2.0 device controller. The SAM L11 architecture pairs the Cortex-M23 core with a Microchip peripheral touch controller (PTC) for capacitive touch sensing and a hardware crypto accelerator supporting AES, SHA, and PKC. TrustZone partitions code and memory into Secure and Non-Secure worlds, allowing firmware updates to be authenticated before they touch protected memory regions. Memory protection is enforced by the TrustZone Memory Protection Controller (MPC). Typical applications include IoT end nodes, secure sensor hubs, wearable medical devices, smart metering, secure industrial controllers, and tamper-resistant payment terminals. The combination of TrustZone and ultra-low power is rare, so designers choose it specifically when both security boundaries and battery life matter. Designers should plan a secure-boot flow before locking the part in production: the immutable bootloader row, OTP region, and TrustZone configuration are one-time programmable and difficult to change later. Use Microchip's MPLAB X IDE with the SAML11 Xplained Pro board for evaluation.

询价 联系我们
ATSAML11D15A-MFKPH - 32KB Flash Cortex-M23 MCU | Microchip
ATSAML11D15A-MFKPH

ATSAML11D15A-MFKPH - 32KB Flash Cortex-M23 MCU | Microchip

The Microchip Technology ATSAML11D15A-MFKPH is a 32-bit ARM Cortex-M23 SAM L11 microcontroller with TrustZone security, delivering 32 MHz CPU performance with 32 KB Flash and 8 KB SRAM in a 24-pin VQFN (4x4 mm) package. The device operates from 1.62V to 3.63V supply, integrates a hardware Crypto accelerator, and supports up to 125 C junction temperature for industrial environments. Active current consumption is rated below 25 uA/MHz with sub-100 nA sleep current, making it among the lowest-power Cortex-M23 MCUs in its class. A microcontroller (MCU) is a single-chip computer that integrates a CPU core, program memory (Flash), data memory (SRAM), and peripherals such as timers, communication controllers, and analog blocks. The SAM L11 family sits at the top of Microchip's low-power MCU hierarchy: Cortex-M23 -> ARMv8-M baseline architecture -> 32-bit microcontroller -> embedded processor -> semiconductor. It is designed for battery-powered and secure IoT endpoints where both energy budget and tamper resistance are critical. Key features include ARM TrustZone for hardware-isolated secure/non-secure code regions, secure key storage, chip-level tamper resistance, an Enhanced Peripheral Touch Controller (PTC) for capacitive touch, and integrated AES/SHA crypto accelerators. The 24-pin VQFN-24 package provides a compact 4x4 mm footprint suited for space-constrained sensor nodes and wearables. The MCU also includes a 12-bit ADC, multiple SERCOM interfaces configurable as UART/SPI/I2C, and a Self-Programming Flash controller for field updates. The Cortex-M23 core implements the ARMv8-M baseline instruction set with TrustZone-M extensions and a single-cycle hardware multiply. Microchip's SAM L11 architecture partitions the bus matrix into secure and non-secure address spaces enforced by the IDAU (Implementation Defined Attribution Unit), enabling a small secure bootloader to gate access to cryptographic keys. This isolates provisioning secrets from the main application firmware, a configuration typically reserved for parts costing 2-3x more. Typical applications include secure IoT sensor nodes, smart meters, medical wearable patches, industrial HMI with capacitive touch, secure payment terminals, and authenticated firmware-update dongles. The combination of TrustZone, hardware crypto, sub-100 nA sleep, and 32 KB Flash targets designs that need defense-in-depth without a discrete secure element. When designing with the SAM L11, place a 100 nF decoupling capacitor within 2 mm of each VDD pin and a 4.7 uF bulk capacitor on the main supply rail. The Enhanced PTC requires careful PCB trace routing - keep touch electrodes on a dedicated layer with a ground hatch. Use Atmel START or MPLAB X with the Harmony 3 framework to configure TrustZone attribution and the CryptoCell accelerator properly, otherwise secure boot may fail silently. This page synthesizes distributor pricing, drop-in alternatives across the SAM L10/L11 family, and practical TrustZone configuration notes not found in a single datasheet chapter.

询价 联系我们
ATSAML11D15A-MFT - 32KB Flash ARM Cortex-M23 MCU | Microchip
ATSAML11D15A-MFT

ATSAML11D15A-MFT - 32KB Flash ARM Cortex-M23 MCU | Microchip

The Microchip Technology ATSAML11D15A-MFT is an ARM Cortex-M23 based 32-bit microcontroller in the SAM L11 family, integrating 32 KB of Flash and 8 KB of SRAM in a 24-pin VQFN (4x4 mm) package with an exposed thermal pad. It operates from a single 1.62 V to 3.63 V supply, runs at up to 32 MHz, and delivers less than 25 uA/MHz active current and less than 100 nA in sleep mode. A Cortex-M23 microcontroller is an ARMv8-M Baseline microcontroller core designed for energy-efficient embedded computing with hardware-level security extensions. The Cortex-M23 architecture sits at the entry tier of the ARM Cortex-M family, below Cortex-M0+/M4/M7 but above legacy Cortex-M0, and the SAM L11 family is the industry's first Cortex-M23 implementation to integrate ARM TrustZone technology for hardware-isolated secure and non-secure code execution. Key features include TrustZone for ARMv8-M, secure key storage, chip-level tamper resistance, a True Random Number Generator (TRNG), and AES/SHA hardware accelerators. The device integrates 6 SERCOM (serial communication) channels configurable as UART/SPI/I2C, a 12-bit ADC up to 1024 ksps, up to 17 GPIO, and an RTC counter from 30 to 50 kHz. The package exposes a dedicated external interrupt and a frequency meter. The SAM L11 architecture pairs the Cortex-M23 core with a single-cycle hardware multiplier and a Memory Protection Unit (MPU), while keeping the interrupt latency under 12 cycles. The TRNG and crypto accelerators offload key exchange and authentication from the CPU, enabling secure boot and firmware update paths without taxing the 32 MHz core. Typical applications include IoT end nodes with secure boot, smart sensors with authenticated firmware, access control and anti-counterfeit peripherals, battery-powered wireless sensor nodes, and medical wearables requiring hardware tamper detection. The 24-VQFN package supports compact module designs where the secure element must share a PCB with an RF transceiver or sensor front-end. When designing with this device, ensure the 24-VQFN exposed pad is soldered to a continuous ground plane for thermal dissipation and signal integrity. Configure TrustZone linker sections early in firmware development - retro-fitting secure/non-secure partitioning after integration typically requires significant refactoring of peripheral access APIs. This page synthesizes distributor pricing across 8 sources, drop-in SAM L11 family alternatives, and TrustZone-aware design notes that are not aggregated on the manufacturer product page.

询价 联系我们
ATSAML11D15A-MFTKPH - 32KB Flash TrustZone Cortex-M23 MCU | Microchip
ATSAML11D15A-MFTKPH

ATSAML11D15A-MFTKPH - 32KB Flash TrustZone Cortex-M23 MCU | Microchip

The Microchip Technology ATSAML11D15A-MFTKPH is an ultra-low-power 32-bit ARM Cortex-M23 microcontroller featuring ARM TrustZone technology, hardware crypto acceleration, and enhanced Peripheral Touch Controller (PTC), operating at up to 32 MHz with 32KB Flash and 8KB SRAM in a 24-pin VQFN (4x4 mm) package with exposed pad. A microcontroller (MCU) is a single-chip computer that integrates a CPU core, memory, and programmable peripherals. The Cortex-M23 is ARM's smallest and most energy-efficient application processor, designed for deeply embedded IoT and secure applications. The ATSAML11 belongs to the L11 sub-family of the SAM MCU portfolio, adding TrustZone-M hardware isolation between secure and non-secure code regions—a technology standard inherited from ARM's application processors but adapted for microcontroller-class devices. Hypernyms in the SAM family taxonomy: SAM L11 -> Cortex-M23 MCU -> ARM 32-bit MCU -> microcontroller -> embedded processing IC. Key specifications include active-mode current consumption below 25 uA/MHz and sleep-mode current below 100 nA, making it one of the lowest-power Cortex-M23 devices in production. The on-chip crypto subsystem supports AES, SHA, and True Random Number Generation. Integrated peripherals include up to six SERCOM serial interfaces, a 12-bit ADC, 10-bit DAC, analog comparator, and the enhanced PTC for capacitive touch sensing. The operating voltage range of 1.62 V to 3.63 V supports single-cell lithium or 3.3 V system rails. The silicon integrates secure key storage and chip-level tamper resistance, targeting IoT endpoints that must comply with PSA Certified Level 1 or higher security assurance. The -MFTKPH suffix indicates a 24-pin VQFN with tape-and-reel packaging, factory-provisioned crypto keys, and the extended -40 °C to +125 °C industrial temperature grade. Typical applications include secure IoT sensor nodes, smart meters, medical wearables, capacitive-touch user interfaces, and battery-powered wireless endpoints. The combination of TrustZone isolation, hardware crypto, and sub-25 uA/MHz active current makes it well suited for energy-harvesting designs. Design tip: route the exposed pad (EP) to a continuous ground plane with at least nine thermal vias to keep junction temperature within the 125 °C limit. Use Atmel Studio 7 or MPLAB X IDE with the SAML11 device pack for development. This page synthesizes distributor stock levels, parametric drop-in alternatives, and practical design notes that go beyond the manufacturer datasheet summary, helping engineers evaluate the ATSAML11D15A-MFTKPH for secure low-power designs.

询价 联系我们
ATSAML11D15A-MU - 32KB Flash Cortex-M23 MCU | Microchip
ATSAML11D15A-MU

ATSAML11D15A-MU - 32KB Flash Cortex-M23 MCU | Microchip

The Microchip ATSAML11D15A-MU is a 32-bit ARM Cortex-M23 microcontroller from the SAM L11 family, featuring 32KB Flash, 8KB SRAM, ARM TrustZone technology, and chip-level security in a 24-pin VQFN (4x4 mm) package. It operates at up to 32 MHz and is targeted at ultra-low-power IoT and secure connected edge applications, consuming less than 25 uA/MHz in active mode and under 100 nA in sleep mode per the manufacturer product page. A microcontroller (MCU) is a single-chip computer that integrates a CPU core, memory (Flash/SRAM), and programmable peripherals. Within the broader taxonomy, MCUs belong to microprocessors, which sit under integrated circuits and ultimately semiconductors. The Cortex-M23 core is an Armv8-M baseline implementation, positioned below Cortex-M3/M4 in performance but above Cortex-M0+ in features, with optional TrustZone-M security extensions for hardware-isolated trusted code execution. Key features include ARM TrustZone for Cortex-M technology enabling hardware-level secure/non-secure code isolation, secure key storage, chip-level tamper resistance, a True Random Number Generator (TRNG), and secure boot. Peripherals include SERCOM (configurable serial communication), ADC, timers, and event system. The device supports 1.6V to 3.6V supply voltage, making it suitable for battery-powered designs using lithium coin cells or 2xAA alkaline. Typical applications include IoT end nodes, smart sensors, secure authentication tokens, medical wearables, industrial wireless sensor nodes, and consumer devices requiring secure firmware update and anti-counterfeiting. The combination of TrustZone, tamper detection, and secure boot makes it Microchip's lowest-power MCU with hardware-rooted security. When designing with this device, ensure that the secure boot configuration is provisioned during production programming, as the TrustZone attribution table cannot be modified after lock. For ultra-low-power designs, leverage the SleepWalking feature to allow peripherals to wake the CPU only on relevant events, reducing average current draw to single-digit microamps in typical IoT duty cycles. This page synthesizes distributor pricing, verified drop-in alternatives from the SAM L11 family, and practical design notes not found in the manufacturer datasheet.

询价 联系我们
ATSAML11D15A-MUKPH - 32KB Flash ARM Cortex-M23 Crypto MCU | Microchip
ATSAML11D15A-MUKPH

ATSAML11D15A-MUKPH - 32KB Flash ARM Cortex-M23 Crypto MCU | Microchip

The Microchip Technology ATSAML11D15A-MUKPH is a 32-bit ARM Cortex-M23 microcontroller from the SAM L11 family, integrating 32 KB Flash, 8 KB SRAM, and Microchip's chip-level security subsystem with ARM TrustZone technology. It operates at up to 32 MHz from a 1.62 V to 3.63 V supply and is housed in a 24-pin VQFN (4x4 mm) package with exposed thermal pad. According to Microchip product page, the device consumes less than 25 uA/MHz in active mode and less than 100 nA in sleep mode, making it the industry's lowest-power Cortex-M23 MCU with TrustZone. What is a low-power secure microcontroller? A low-power secure microcontroller is a single-chip processor that integrates CPU core, embedded Flash/SRAM, secure key storage, and hardware cryptography on one die. Within the embedded system hierarchy, the ATSAML11D15A belongs to the microcontroller (MCU) category, which sits below microprocessors and above simple digital logic ICs. Security-oriented MCUs add tamper detection, secure boot, and TrustZone-M isolation to prevent firmware extraction and code injection in connected IoT endpoints. Key features include ARM TrustZone-M for hardware-isolated secure/non-secure code regions, secure key storage with crypto-acceleration, a True Random Number Generator (TRNG), and chip-level tamper resistance. The device supports up to 32 KB Flash and 8 KB SRAM, plus 2 KB data Flash. Peripherals include SERCOM (configurable as UART/SPI/I2C), 12-bit ADC, DAC, timers, RTC, and PTC touch controller for capacitive touch interfaces. The integrated crypto block supports AES, SHA, and secure key provisioning. The ATSAML11D15A-MUKPH uses a 32-bit ARM Cortex-M23 core with single-cycle I/O access and a Memory Protection Unit (MPU). TrustZone-M enables isolation of secure firmware from non-secure application code, allowing OEMs to protect boot loaders, crypto keys, and IP. The exposed-pad VQFN-24 package provides a low thermal resistance path suitable for industrial operating ranges. Typical applications include IoT endpoint security, secure authentication tokens, smart utility meters, secure payment terminals, and tamper-resistant industrial sensors. The 24-pin VQFN and low power consumption also make it suitable for battery-powered wearable security devices. When designing with this MCU, allocate adequate decoupling (100 nF + 1 uF) close to VDD pins and provide a clean low-noise supply, as crypto operations are sensitive to VDD glitching. TrustZone-M requires careful linker script setup to partition secure/non-secure regions. This page synthesizes verified distributor pricing, drop-in alternatives, and practical design notes not found on standard distributor listings.

询价 联系我们
ATSAML11D15A-MUTKPH - 32KB Flash Cortex-M23 MCU | Microchip
ATSAML11D15A-MUTKPH

ATSAML11D15A-MUTKPH - 32KB Flash Cortex-M23 MCU | Microchip

The Microchip Technology ATSAML11D15A-MUTKPH is an ultra-low-power 32-bit ARM Cortex-M23 microcontroller with TrustZone security, hardware crypto, and enhanced Peripheral Touch Controller, delivering 32 KB of Flash and 8 KB of SRAM in a 24-pin VQFN (4x4 mm) package with exposed thermal pad. The device operates from 1.62 V to 3.63 V supply and runs at up to 32 MHz core clock. Per the manufacturer datasheet, the SAM L11 family is the industry's first Cortex-M23 microcontroller to integrate ARM TrustZone technology with secure key storage and chip-level tamper resistance, targeting IoT endpoint security. Active-mode current is less than 25 uA/MHz and sleep-mode current is less than 100 nA, making the part suitable for battery-powered endpoints. The "MUTKPH" suffix denotes tape-and-reel packaging, key-provisioned variant, in the 24-pin VQFN with exposed pad. A microcontroller (MCU) is a single-chip computer that integrates a CPU core, volatile and non-volatile memory, peripherals, and I/O. The Cortex-M23 core is an ARMv8-M baseline implementation optimized for energy efficiency and deterministic interrupt response, sitting between the Cortex-M0+ (smallest) and Cortex-M3/M4 (mid-range) in the ARM MCU hierarchy. MCU -> 32-bit MCU -> ARM Cortex-M MCU -> Cortex-M23 sub-family -> Microchip SAM L11 family -> this specific ATSAML11D15A-MUTKPH part. MCUs combine processor, memory, and peripherals to enable embedded control functions without external logic. Key features include TrustZone for ARMv8-M hardware isolation between secure and non-secure code, hardware cryptographic accelerators (AES, SHA, TRNG), secure boot and secure key storage with OTP, enhanced Peripheral Touch Controller (PTC) supporting touch buttons/sliders/proximity, SERCOM (configurable serial communication) interfaces, 12-bit ADC, and multiple timer/counter channels. The 24-pin VQFN package also includes an exposed pad for thermal dissipation. The part supports an extended operating temperature range, with the KPH suffix denoting the key-provisioned, tape-and-reel configuration. Architecturally, the SAM L11 combines a Cortex-M23 core with a Cortex-M0+ auxiliary core for security functions (TrustZone-aware isolation), a hardware crypto subsystem, secure boot ROM, and SRAM partitioning between secure and non-secure regions. The Peripheral Touch Controller (PTC) uses the QTouch library and supports both self-capacitance and mutual-capacitance touch sensing. Compared to the SAM L10 (no TrustZone), the L11 adds hardware crypto and secure boot, doubling the Flash/SRAM budget in some configurations and enabling use cases that require certified firmware updates. Typical applications include secure IoT endpoints requiring authenticated firmware updates (thermostats, door locks, industrial sensors), secure payment terminals and key fobs, battery-powered wearables and medical sensors with touch HMI, factory automation nodes with secure commissioning, and consumer appliances needing OTA updates. The combination of TrustZone, hardware crypto, and ultra-low-power sleep makes the part well suited to devices that must stay in the field for years on a single coin cell while remaining resilient to physical tamper. When designing with the ATSAML11D15A-MUTKPH, allocate the secure / non-secure memory partition early in firmware architecture. Place cryptographic keys, boot loaders, and OTA-verification code in the secure region, leaving non-secure code free to use the full Cortex-M23 instruction set. The exposed pad on the VQFN-24 must be soldered to a continuous ground copper pour for thermal and electrical performance. Per the datasheet, bypass VDD with a 100 nF and 1 uF ceramic pair placed within 3 mm of the pin, and use the PTC's reference design layout when implementing touch electrodes. This page synthesizes distributor pricing, drop-in alternatives from the same SAM L11 family and cross-brand Cortex-M23/M0+ MCU equivalents, and practical design notes not found in the standalone manufacturer datasheet.

询价 联系我们
ATSAML11D15A-YUT - ARM Cortex-M23 MCU 32KB Flash TrustZone | Microchip
ATSAML11D15A-YUT

ATSAML11D15A-YUT - ARM Cortex-M23 MCU 32KB Flash TrustZone | Microchip

The Microchip Technology ATSAML11D15A-YUT is an ultra-low-power 32-bit ARM Cortex-M23 microcontroller with ARM TrustZone technology, offering 32KB Flash and 8KB SRAM in a 24-pin SSOP package. Operating at up to 32MHz with a CoreMark score supporting real-time deterministic workloads, it integrates chip-level security with secure key storage, chip-level tamper resistance, and cryptographic accelerators. The device consumes less than 25µA/MHz in active mode and less than 100nA in sleep mode, making it one of the lowest-power Cortex-M23 MCUs available. A microcontroller (MCU) is an integrated circuit that combines a processor core, program memory (Flash), data memory (RAM), and programmable peripherals on a single chip. Within the semiconductor hierarchy, microcontrollers belong to embedded processors, which sit under logic ICs and integrated circuits. The Cortex-M23 specifically is an ARMv8-M Baseline core designed for energy-constrained secure applications, sitting below Cortex-M3/M4/M7 in performance but adding TrustZone for ARM hardware-level isolation between secure and non-secure code regions. Key features include 32KB Flash with secure boot support, 8KB SRAM, ARM TrustZone-M technology, hardware AES accelerator, True Random Number Generator (TRNG), secure key storage, up to 32MHz operation, and a wide operating voltage range of 1.62V to 3.63V supporting both 1.8V and 3.3V system rails. The peripheral set includes multiple SERCOM (serial communication) interfaces, a 12-bit ADC, timers, and an RTC, providing flexibility for sensor and IoT nodes. The ATSAML11D15A-YUT is built on a low-leakage process and integrates a sophisticated power management unit with multiple sleep modes (Idle, Standby, Backup, and Off). The TrustZone isolation enables IP protection and secure firmware updates, critical for IoT endpoint devices vulnerable to physical and remote attacks. Cryptographic accelerators offload AES, SHA, and TRNG operations from the Cortex-M23 core, reducing active current and improving throughput. Typical applications include IoT end nodes with secure cloud connectivity, smart sensors requiring firmware authentication, building automation controllers, asset tracking devices, medical wearables with HIPAA-grade data protection, and industrial sensor hubs operating from coin-cell or energy-harvesting power sources. The combination of TrustZone and ultra-low sleep current uniquely targets battery-powered secure endpoints. When designing with this MCU, ensure the TrustZone configuration is finalized before production. The secure attribution unit (SAU) and implementation-defined attribution unit (IDAU) require careful setup to prevent security violations. Decoupling capacitors must be placed close to VDD pins per the manufacturer layout guidelines. This page synthesizes distributor pricing, drop-in alternatives from the same SAM L11 family, and practical design notes not consolidated in the manufacturer datasheet.

询价 联系我们
ATSAML11D16A-MFT - 32MHz Cortex-M23 TrustZone MCU | Microchip
ATSAML11D16A-MFT

ATSAML11D16A-MFT - 32MHz Cortex-M23 TrustZone MCU | Microchip

The Microchip Technology ATSAML11D16A-MFT is a 32-bit ARM Cortex-M23 microcontroller with chip-level security and ARM TrustZone technology, featuring 64KB Flash and 16KB SRAM in a 24-pin VQFN (4x4 mm) package. It operates at up to 32 MHz, runs from 1.62V to 3.63V supply, and consumes less than 25 uA/MHz in active mode and less than 100 nA in sleep mode. The device targets the industrial 125C temperature grade (-MFT suffix). At its core, the SAML11 belongs to the SAM L11 family - the industry's first Cortex-M23 MCU with TrustZone for ARMv8-M, integrating secure boot, secure key storage, chip-level tamper resistance, and TrustZone-M address-space partitioning. As a low-power MCU, it fits between 8-bit legacy controllers (PIC, AVR) and Cortex-M0+/M4 mainstream devices, offering a balance of ultra-low power, deterministic Cortex-M performance, and hardware-rooted security. Key differentiating features include 64KB Flash, 16KB SRAM, a 12-bit 1 Msps ADC, two analog comparators, two I2C, two SPI, one I2S, up to six SERCOM channels, a full-speed USB device, a 32 kHz RTC, and a hardware cryptographic accelerator supporting AES, SHA, and TRNG. Typical applications include IoT end nodes, secure sensor hubs, smart meters, access control, medical wearables, and battery-powered industrial sensor transmitters. When designing with the SAML11, TrustZone configuration in the project (via MPLAB X + Harmony 3 or Atmel START) must be planned up-front because re-partitioning after firmware release requires secure-key provisioning. Compared to the SAM L10 sibling, the L11 adds TrustZone-M, secure boot ROM, and the crypto accelerator, while sharing the same 24-pin VQFN footprint for drop-in security upgrade paths. This page synthesizes distributor pricing, same-family drop-in alternatives, and TrustZone-aware design notes not consolidated on a single manufacturer page.

询价 联系我们
ATSAML11D16A-MFTKPH - 32-bit Cortex-M23 MCU 64KB Flash | Microchip
ATSAML11D16A-MFTKPH

ATSAML11D16A-MFTKPH - 32-bit Cortex-M23 MCU 64KB Flash | Microchip

The Microchip ATSAML11D16A-MFTKPH is an ultra-low-power 32-bit ARM Cortex-M23 microcontroller with 64KB Flash, 16KB SRAM, integrated ARM TrustZone technology, hardware crypto acceleration, and an enhanced Peripheral Touch Controller (PTC), housed in a 24-pin VQFN package with exposed pad and shipped on tape-and-reel. The device targets secure IoT endpoints, sensor nodes, and battery-powered applications where both cryptographic isolation and sub-100 nA sleep current are mandatory design constraints. A Cortex-M23 MCU is a 32-bit microcontroller built on the ARMv8-M Baseline architecture, succeeding the Cortex-M0/M0+ with branch-folding and a single-cycle hardware multiplier while retaining the deterministic interrupt behavior engineers expect from M-class cores. When paired with ARM TrustZone for ARMv8-M, the core enforces secure/non-secure code separation at the bus level, partitioning memory and peripheral access without a separate secure-element IC. The hierarchy is: Cortex-M23 -> ARMv8-M Baseline core -> 32-bit MCU -> embedded microcontroller -> semiconductor. The crypto block typically accelerates AES, SHA, and TRNG operations inside the secure domain, eliminating software crypto overhead. Key features include 64KB embedded Flash with ECC, 16KB SRAM, an enhanced PTC supporting capacitive touch and proximity sensing, a 12-bit 1 MSPS ADC, two SERCOM interfaces configurable as I2C/SPI/UART, and a full-speed USB device port on selected variants. Active current stays below 25 uA/MHz and sleep current under 100 nA, the latter enabled by always-on peripherals such as RTC and WDT that wake the core from backup mode. The TrustZone-M hardening, secure key storage, and tamper detection distinguish this part from general-purpose Cortex-M0+ MCUs. The architecture pairs a low-leakage process with a configurable power manager that scales Vcore for active versus sleep modes. TrustZone-M address space partitioning, secure boot ROM, and a true random number generator support secure firmware update and anti-rollback counters, allowing the MCU to act as both the application processor and a lightweight secure element in space-constrained IoT designs. Typical applications include secure IoT sensor nodes, smart-home and building-automation endpoints, medical wearables requiring AES-accelerated BLE pairing, tamper-detecting industrial meters, and low-power wireless sensor hubs. The 24-VQFN footprint suits reflow-compatible compact designs where PCB real estate is at a premium. Design consideration: route the SWD interface (SWDIO/SWCLK) on a dedicated short trace to a 10-pin Cortex Debug connector, and provide a 100 nF decoupling cap within 2 mm of each VDD pin. The exposed thermal pad must be soldered to a continuous ground pour for electrical and thermal performance. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet. Verified 2026-09-22 from DigiKey, Mouser, and Microchip product pages.

询价 联系我们
ATSAML11D16A-MUT - Cortex-M23 MCU 64KB Flash TrustZone | Microchip
ATSAML11D16A-MUT

ATSAML11D16A-MUT - Cortex-M23 MCU 64KB Flash TrustZone | Microchip

The Microchip Technology ATSAML11D16A-MUT is a 32-bit ARM Cortex-M23 microcontroller from the SAM L11 family, featuring 64KB of Flash memory, 16KB of SRAM, and ARM TrustZone technology for hardware-level security. Housed in a 24-pin VQFN (4x4 mm) package with an exposed thermal pad, this IC integrates chip-level tamper resistance, secure key storage, and a built-in cryptographic accelerator. The device operates up to 32 MHz and targets ultra-low-power IoT, secure authentication, and edge sensor applications. An ARM Cortex-M23 microcontroller is a 32-bit processor core based on the ARMv8-M architecture, designed for embedded systems that require deterministic real-time performance with very low active and standby power consumption. As a microcontroller (MCU), the ATSAML11D16A-MUT integrates the Cortex-M23 CPU core, Flash program memory, SRAM data memory, peripherals, and security subsystems on a single silicon die. Within the broader taxonomy, it belongs to the hierarchy: microcontroller -> embedded processor -> integrated circuit -> semiconductor, with the Cortex-M23 core positioned between the smaller Cortex-M0+ and the higher-performance Cortex-M4 family. Key features include ARM TrustZone for Cortex-M23 providing hardware isolation between secure and non-secure code regions, a True Random Number Generator (TRNG), Secure Boot, and on-chip cryptographic accelerators. The device consumes less than 25 uA/MHz in active mode and less than 100 nA in sleep mode, making it among the lowest-power Cortex-M23 MCUs available. Additional peripherals include multiple SERCOM interfaces, a 12-bit ADC, a DAC, comparators, timers, and a capacitive touch Peripheral Touch Controller (PTC). The ATSAML11D16A-MUT is targeted at industrial temperature range applications (operating from -40C to +85C ambient, with internal die capable of reaching higher junction temperatures per the datasheet). Compared to the SAM L10 family, the SAM L11 adds TrustZone and the Crypto accelerator, enabling secure firmware update, anti-counterfeit authentication, and tamper detection. The 4x4 mm VQFN-24 package with exposed pad provides adequate thermal dissipation for the low-power design and a compact footprint for space-constrained IoT modules. Typical applications include IoT end nodes with secure cloud onboarding, smart meters, secure authentication tokens, anti-counterfeit hardware modules, smart sensors, and battery-powered wearables requiring firmware protection. Designers favor this MCU when their application must combine sub-100 nA sleep current with cryptographic integrity and small form factor. When designing with the ATSAML11D16A-MUT, ensure the exposed thermal pad is soldered to a sufficiently large copper pour to meet the datasheet's thermal performance specification and that the decoupling network matches the Microchip SAM L11 reference design. Use Microchip's MPLAB X IDE with the MCC (MPLAB Code Configurator) plugin to generate secure and non-secure project partitions. This page synthesizes distributor pricing tiers, drop-in alternative MPNs, and practical design guidance not found in the manufacturer datasheet, providing engineers with a single decision-ready reference.

询价 联系我们
ATSAML11D16A-MUTKPH - 64KB Flash Cortex-M23 MCU w/ TrustZone | Microchip
ATSAML11D16A-MUTKPH

ATSAML11D16A-MUTKPH - 64KB Flash Cortex-M23 MCU w/ TrustZone | Microchip

The Microchip Technology ATSAML11D16A-MUTKPH is an ultra-low-power 32-bit ARM Cortex-M23 microcontroller with ARM TrustZone technology, 64KB Flash, 16KB SRAM, hardware crypto accelerator, and Enhanced Peripheral Touch Controller (PTC), housed in a 24-pin VQFN (4x4 mm) package supplied on tape and reel with factory-provisioned secure keys. What is a Cortex-M23 microcontroller? The Cortex-M23 is ARM's smallest and most energy-efficient application processor core implementing the ARMv8-M baseline instruction set. It is a microcontroller (MCU) - a single-chip computer containing CPU, memory, peripherals, and I/O. MCUs sit below microprocessors in the compute hierarchy and are designed for embedded control rather than general-purpose computing. The Cortex-M23 family specifically targets IoT edge nodes, secure sensors, and battery-powered devices where TrustZone-M hardware isolation prevents unauthorized code from accessing secure assets. Key features of the ATSAML11D16A-MUTKPH include active-mode current under 25 uA/MHz, sleep-mode current under 100 nA, a 32 MHz maximum CPU clock, hardware-accelerated AES and Secure Hash Algorithm (SHA), secure key storage, chip-level tamper resistance, and an Enhanced PTC for capacitive touch sensing. The 24-pin VQFN (4x4 mm) package provides a compact footprint suitable for space-constrained wearable and IoT designs. The 'KPH' suffix indicates tape-and-reel packaging with factory-provisioned crypto keys. Architecturally, the ATSAML11D16A-MUTKPH integrates an ARMv8-M Cortex-M23 core with TrustZone-M, a TrustZone-aware Memory Protection Unit (MPU), a Secure Boot loader, secure debug, and a hardware crypto subsystem supporting AES-128/256, SHA-256, and True Random Number Generation (TRNG). Peripherals include SERCOM (configurable serial communication), 12-bit ADC, 10-bit DAC, timers, and the Enhanced PTC for capacitive touch. Typical applications include IoT end nodes with secure firmware update, smart sensors, secure wearables, battery-powered medical monitors, contactless payment terminals, and HomeKit/Zigbee/LoRa end devices. The combination of sub-100nA sleep current and TrustZone isolation makes the part attractive for products that must remain secure across multi-year battery deployments. When designing with this device, allocate sufficient PCB area for the exposed thermal pad (EP) on the 24-VQFN, and follow Microchip's Atmel START pin configuration guidance to lock the secure debug and TrustZone boundaries before production. This page synthesizes distributor pricing, same-brand same-package drop-in alternatives, and practical hardware-security notes not found in the manufacturer datasheet alone.

询价 联系我们
ATSAML11D16A-YF - 32MHz Cortex-M23 MCU 64KB Flash | Microchip
ATSAML11D16A-YF

ATSAML11D16A-YF - 32MHz Cortex-M23 MCU 64KB Flash | Microchip

The Microchip Technology ATSAML11D16A-YF is a 32-bit ARM Cortex-M23 microcontroller from the SAM L11 family, featuring 64KB Flash, 16KB SRAM, and ARM TrustZone technology, housed in a 24-pin SSOP package. It operates at up to 32 MHz (2.62 CoreMark/MHz, up to 31 DMIPS), with an operating voltage range of 1.62V to 3.63V, and is rated for the industrial temperature range of -40°C to +125°C. According to the Microchip product page, it is the industry's first and lowest-power Cortex-M23 MCU with chip-level security, consuming less than 25 µA/MHz in active mode and less than 100 nA in sleep mode. A microcontroller (MCU) is a single-chip computer that integrates a processor core, memory, and programmable I/O peripherals. The Cortex-M23 class is an ARMv8-M Baseline processor featuring a single-cycle hardware multiplier, hardware divider, Nested Vector Interrupt Controller (NVIC), and Memory Protection Unit (MPU). It is positioned as a low-power, low-cost successor to Cortex-M0/M0+, sitting within the broader taxonomy: ARM Cortex-M23 -> ARMv8-M processor -> 32-bit microcontroller -> embedded processor -> semiconductor. The SAM L11 family adds TrustZone isolation to this baseline, enabling hardware-enforced secure and non-secure code domains for IoT edge devices. Key features of the ATSAML11D16A-YF include secure key storage, chip-level tamper resistance, a Crypto Acceleration Module supporting AES, SHA, and True Random Number Generator (TRNG), and a 12-bit 1 Msps ADC. Additional integrated peripherals include SERCOM (configurable serial communication), TCC timer/counter, RTC, DMA, and a PTC (Peripheral Touch Controller) for capacitive touch sensing. The 24-SSOP package with 0.209" (5.30 mm) width is suitable for compact industrial layouts. The ATSAML11D16A-YF targets IoT edge nodes, secure sensor hubs, smart metering, and connected medical wearables. Designers can leverage the TrustZone isolation to run a crypto root-of-trust in secure mode while the non-secure world runs the application stack, reducing attack surface. The 64KB Flash variant offers the largest code space in the SAM L11 24-pin SSOP line, supporting more complex secure firmware. The 16KB SRAM and 2KB Data Flash (for EEPROM emulation) further reduce external component count. Typical applications include secure sensor nodes, IoT endpoints with secure boot, smart meters, industrial HMI, and medical wearable monitors. When designing with this MCU, plan for TrustZone partition early in firmware architecture. For ultra-low-power battery designs, use the integrated RTC and the <100 nA sleep mode to enable multi-year coin-cell operation. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes that go beyond what is published in the manufacturer datasheet.

询价 联系我们
ATSAML11D16A-YFT - SAM L11 32MHz Cortex-M23 MCU 64KB Flash | Microchip
ATSAML11D16A-YFT

ATSAML11D16A-YFT - SAM L11 32MHz Cortex-M23 MCU 64KB Flash | Microchip

The Microchip Technology ATSAML11D16A-YFT is an ARM Cortex-M23 based 32-bit microcontroller from the SAM L11 family, featuring 64 KB Flash, 16 KB SRAM, and ARM TrustZone technology, housed in a 24-pin SSOP package with tape-and-reel packaging. It operates at a CPU clock of 32 MHz, draws less than 25 uA/MHz in active mode, and consumes less than 100 nA in sleep mode. A microcontroller (MCU) is an integrated circuit that combines a CPU core, memory (Flash and SRAM), and programmable peripherals on a single silicon die. The Cortex-M23 is the smallest and most energy-efficient ARM processor core with TrustZone, providing hardware isolation between secure and non-secure software execution. The SAM L11 belongs to the hierarchy: microcontroller -> embedded processor -> semiconductor, and is positioned by Microchip as the industry's first low-power Cortex-M23 MCU with chip-level security. Key features include chip-level tamper resistance, secure key storage, ARM TrustZone technology, integrated cryptographic accelerators, and an operating voltage range of 1.62V to 3.63V. The device also includes multiple communication interfaces, ADC channels, and configurable SERCOM peripherals that are typical of the SAM L family. The part is qualified for the -40C to +125C industrial/automotive temperature range. The SAM L11 architecture pairs an ultra-low-power Cortex-M23 core with a peripheral touch controller, event system, and SmartEEPROM emulation. The 32 MHz operation at 25 uA/MHz keeps active-mode efficiency near the lower bound for Cortex-M class devices, while sub-100 nA sleep current enables years of battery life on coin cells. The on-chip cryptographic block supports AES, SHA, and True Random Number Generation. Typical applications include secure IoT end nodes, smart sensors, wearables, wireless beacons, access control, and battery-powered edge devices that require authenticated firmware and tamper detection. The SSOP-24 footprint is well-suited for hand-solderable prototyping or low-density production assemblies. When designing with this device, validate that your toolchain supports TrustZone-M (e.g., MPLAB X IDE with MCC, or Keil/IAR with CMSIS packs). Because the part ships as -YFT (tape-and-reel, 125C), pair it with a -YF (tray) variant for prototyping to avoid re-reeling. This page synthesizes distributor pricing, drop-in alternatives from the same SAM L11 family, and practical design notes not found in the standalone manufacturer datasheet.

询价 联系我们
ATSAML11E14A-AF - SAM L11 Cortex-M23 32MHz MCU w/ TrustZone | Microchip
ATSAML11E14A-AF

ATSAML11E14A-AF - SAM L11 Cortex-M23 32MHz MCU w/ TrustZone | Microchip

The Microchip Technology ATSAML11E14A-AF is an ultra-low-power ARM Cortex-M23 microcontroller from the SAM L11 family, integrating ARM TrustZone technology for chip-level security. It features a 32-bit single-core CPU running at 32 MHz, 16 KB of Flash, 8 KB of SRAM, and is housed in a 32-pin TQFP (7x7 mm) package. Active-mode current consumption is below 25 uA/MHz and sleep-mode current is below 100 nA, making it one of the lowest-power Cortex-M23 MCUs in the industry. A microcontroller (MCU) is a single-chip computer that integrates a CPU core, program and data memory, peripherals, and I/O onto one die. Low-power 32-bit MCUs like the SAM L11 sit within the broader taxonomy of: MCU -> embedded microcontroller -> semiconductor device. They are typically paired with sensors, radios, and power management ICs to build battery-operated or energy-harvesting edge devices. The Cortex-M23 core specifically targets low-power deterministic embedded workloads with the optional TrustZone security extension. Key features include ARM TrustZone-M security, secure key storage, chip-level tamper resistance, True Random Number Generator (TRNG), Secure Boot, and a cryptographic accelerator. The device supports 1.62V to 3.63V supply voltage, an operating temperature range of -40C to +125C, and integrates peripherals such as SERCOM, ADC, and timers. The cryptographic hardware includes AES, SHA, and public-key accelerators, enabling secure firmware update and authenticated sensing. Architecturally, the SAM L11 uses a Cortex-M23 core with a single-cycle multiplier and hardware divide, a Memory Protection Unit (MPU), and TrustZone for Cortex-M that splits memory and peripherals into Secure and Non-Secure worlds. The 16 KB Flash and 8 KB SRAM are accessed through tightly-coupled low-power buses, allowing fast wake-up from sleep states while retaining RAM. Typical applications include IoT end nodes, secure sensor hubs, smart meters, medical wearables, and battery-powered authentication tokens. The device is also widely used in industrial sensor networks where secure boot and tamper detection are mandatory. The AEC-Q100 qualified grade supports automotive deployments. When designing with the SAM L11, plan for separate secure/non-secure linker regions and allocate the cryptographic accelerator for AES-128/256 or SHA-256 workloads. The 100 nA sleep current enables multi-year battery life on coin cells when duty-cycling wake events carefully. This page synthesizes distributor pricing, drop-in alternatives within the SAM L10/L11 family, and practical design notes not found in the manufacturer datasheet alone.

询价 联系我们
ATSAML11E14A-AFT - Cortex-M23 MCU 32MHz 16KB TQFP-32 | Microchip
ATSAML11E14A-AFT

ATSAML11E14A-AFT - Cortex-M23 MCU 32MHz 16KB TQFP-32 | Microchip

The Microchip ATSAML11E14A-AFT is a 32-bit ARM Cortex-M23 microcontroller IC from the SAM L11 family, integrating ARM TrustZone technology and chip-level security in a 32-pin TQFP (7x7 mm) package. It operates at up to 32 MHz and integrates 16 KB of Flash, 8 KB of SRAM, and a hardware crypto accelerator with secure key storage. What is an ARM Cortex-M23 microcontroller? The Cortex-M23 is an ARMv8-M baseline core designed for ultra-low-power, security-aware embedded applications, sitting below the Cortex-M33 in ARM's hierarchy and above legacy Cortex-M0/M0+ parts. SAM L11 MCUs belong to the broader 32-bit microcontroller category, which itself is a subcategory of embedded microcontrollers within integrated circuits. The Cortex-M23 architectural choice delivers Thumb-2 instruction set support, deterministic interrupt handling, and optional TrustZone for Cortex-M, allowing firmware to partition secure and non-secure execution domains at the hardware level. Key features of this part include less than 25 uA/MHz active current consumption, sub-100 nA sleep current, ARM TrustZone-M technology, secure boot with root-of-trust in Flash, hardware AES/SHA accelerator, secure key storage, chip-level tamper detection, and an operating temperature range up to +125C. Communication peripherals include SERCOM, I2C, SPI, and UART interfaces alongside ADC, DAC, timers, and PTC touch-supporting peripherals. Typical applications span IoT end nodes requiring secure firmware update, smart sensors with attestation, secure authentication tokens, medical wearables needing HIPAA-friendly data protection, building automation controllers, and battery-powered wireless sensor nodes where <100 nA sleep current directly extends operational lifetime on coin-cell batteries. Design consideration: TrustZone partitioning requires linker-script awareness - Secure code, Non-Secure Callable (NSC) veneers, and Non-Secure application code must be placed in distinct memory regions per the SAM L11 reference design. Misplaced code will trigger secure fault exceptions. This page synthesizes distributor pricing, drop-in alternatives drawn from the SAM L10/L11 family, and practical TrustZone design notes not consolidated in the manufacturer datasheet.

询价 联系我们
ATSAML11E14A-AU - 32MHz Cortex-M23 MCU w/ TrustZone | Microchip
ATSAML11E14A-AU

ATSAML11E14A-AU - 32MHz Cortex-M23 MCU w/ TrustZone | Microchip

The Microchip Technology ATSAML11E14A-AU is a 32-bit ARM Cortex-M23 microcontroller belonging to the SAM L11 family, integrating ARM TrustZone technology, secure key storage, and a crypto-acceleration subsystem in a 32-pin TQFP (7x7 mm) package. It delivers 32 MHz CPU performance with 16 KB of Flash, 8 KB of SRAM, and consumes less than 25 uA/MHz in active mode while drawing under 100 nA in deep sleep. The device supports an operating voltage range of 1.62V to 3.63V and operates across the industrial -40C to +85C temperature range. A microcontroller (MCU) is a single-chip computer containing a CPU core, memory, and programmable peripherals that executes embedded firmware in real time. The Cortex-M23 core is the smallest and most energy-efficient ARMv8-M implementation, supporting the TrustZone security extension that partitions firmware and bus accesses into secure and non-secure worlds. The SAM L11 sits in the hierarchy ARM Cortex-M23 -> ARMv8-M MCU -> 32-bit microcontroller -> embedded processor -> semiconductor, and is positioned as Microchip's lowest-power secure MCU for IoT endpoints. Key features include TrustZone for ARMv8-M, a hardware crypto accelerator (AES, SHA, TRNG), secure boot with immutable root-of-trust, 16 KB Flash, 8 KB SRAM, up to 25 GPIO, enhanced Peripheral Touch Controller (PTC) for capacitive sensing, six SERCOM configurable serial interfaces, a 12-bit 1 Msps ADC, and two 16-bit timer/counters. Active mode draws under 25 uA/MHz and standby with full RAM retention drops below 100 nA, making it suitable for battery-powered endpoints that must run for years on a single coin cell. The ATSAML11E14A-AU is built on a low-power 90 nm process and ships with Microchip's MPLAB Harmony 3 firmware framework, ASF, and Atmel Studio toolchains. The silicon revision V-A enables chip-level tamper detection, secure debug, and a True Random Number Generator that meets NIST SP 800-22 statistical suites for cryptographic key generation. Typical applications include secure IoT sensor nodes, smart locks and access control, medical wearables requiring FDA-grade data integrity, utility metering with anti-tamper, secure BLE/LoRa peripherals, and consumer devices requiring OTA firmware authentication. The 32-TQFP footprint is breadboard-friendly and compatible with standard 0.8 mm pitch hand-soldering. When designing with this MCU, allocate 2 KB of Flash for the secure bootloader and reserve a dedicated GPIO for tamper-detect wiring. The crypto accelerator only accelerates AES-128/256 and SHA-256 in hardware; for ECC or RSA, use the TrustZone-protected firmware library to avoid leaking private keys over the debug interface. This page synthesizes distributor pricing, drop-in package-equivalent alternatives from the same SAM L11 family, and practical TrustZone provisioning notes not aggregated elsewhere in the manufacturer datasheet.

询价 联系我们
ATSAML11E14A-AUT - ARM Cortex-M23 MCU 16KB Flash TQFP-32
ATSAML11E14A-AUT

ATSAML11E14A-AUT - ARM Cortex-M23 MCU 16KB Flash TQFP-32

The Microchip Technology ATSAML11E14A-AUT is an ultra-low-power 32-bit ARM Cortex-M23 microcontroller featuring 16KB Flash, 8KB SRAM, and integrated ARM TrustZone technology, housed in a 32-pin TQFP (7x7 mm) package. This device is part of the SAM L11 family, marketed by Microchip as the industry's first Cortex-M23 MCU with chip-level security and hardware isolation through ARM TrustZone. The CPU core runs at up to 32 MHz, balancing performance with sub-25 uA/MHz active power consumption. An ARM Cortex-M23 microcontroller is a 32-bit embedded processor based on the ARMv8-M baseline architecture, designed for low-power, secure IoT endpoints. It is the smallest ARMv8-M core with optional TrustZone-M security extensions, making it suitable for applications requiring hardware-isolated secure and non-secure code execution. Microcontrollers in this class typically integrate Flash, SRAM, and peripherals into a single chip, serving as the central processing unit in embedded systems from sensor nodes to home appliances. Key features of the ATSAML11E14A-AUT include secure key storage, chip-level tamper resistance, support for the SAM L11 secure boot flow, and integrated crypto accelerators. The device supports a 1.6V to 3.6V supply voltage range, offering flexibility across battery-powered and industrial applications. Peripherals include multiple SERCOM interfaces (configurable as UART/SPI/I2C), a 12-bit ADC, timers, and a real-time clock. The low-power design enables less than 100 nA in deep sleep with full SRAM retention and RTC running. The ATSAML11E14A-AUT is engineered for IoT endpoint security, meeting PSA Certified Level 1 requirements with TrustZone-M isolation between trusted and non-trusted firmware. The integrated cryptographic modules support AES, SHA, and secure key provisioning. Its small TQFP-32 footprint and low power profile make it suitable for devices with constrained PCB area and battery life. Typical applications include secure IoT sensors, smart home devices, wearables, fitness trackers, industrial sensor endpoints, and battery-powered security tokens. Its TrustZone capability suits firmware update verification and secure credential storage. When designing with this device, ensure proper TrustZone-M configuration in your linker scripts and boot sequence. Decoupling capacitors should be placed close to the VDDCORE and VDDIO pins, and the NRST pin requires an external pull-up for reliable reset behavior. This page synthesizes distributor pricing, verified drop-in alternatives from the SAM L10/L11 family, and practical design notes not found in the manufacturer datasheet alone.

询价 联系我们