ATSAM4S-XSTK vs ATSAMG53-XPRO 对比
详细并排对比 ATSAM4S-XSTK 出自 Microchip Technology 和 ATSAMG53-XPRO 出自 Microchip Technology。对比关键规格、电气参数、封装、生命周期状态、价格和供货情况，以确定最适合您设计需求的元器件。
Microchip Technology
ATSAM4S-XSTK - SAM4S Xplained Pro ARM Cortex-M4 Starter Kit | Microchip
ATSAM4S-XSTK ✓ 量产中Microchip Technology
ATSAMG53-XPRO - SAM G53 Xplained Pro ARM Cortex-M4 Evaluation Kit | Microchip
ATSAMG53-XPRO Obsolete规格对比
| 参数 | ATSAM4S-XSTK | ATSAMG53-XPRO |
|---|---|---|
| 品牌 | Microchip Technology | Microchip Technology |
| 分类 | Development Boards | Development Boards |
| 生命周期状态 | 有效 | Obsolete |
| 库存状态 | 有库存 | 有库存 |
| 单价（USD） | $159.80 | $55.00 |
| Product Type | Starter Kit (Evaluation Kit + Extension Boards) | — |
| On-board MCU | ATSAM4SD32C | — |
| Core | ARM Cortex-M4 with FPU and DSP extensions | — |
| Maximum CPU Frequency | 120 MHz | — |
| Flash Memory | 2048 KB (2 MB) | — |
| SRAM | 160 KB | 96 KB |
| Low-frequency Crystal | 32.768 kHz (0.032768 MHz) | — |
| Operating Voltage Range (MCU) | 1.62 V to 3.6 V | — |
| USB | USB 2.0 Full-Speed Device/Host with on-chip PHY | — |
| ADC | 12-bit, up to 8 channels (per SAM4S family) | — |
| Communication Peripherals | USART x3, UART x2, TWI (I2C) x2, SPI x2, I2S x2, HS USB | — |
| External Bus Interface | Yes (EBI), plus 16-bit SMC (Static Memory Controller) | — |
| On-board Debugger | EDBG (Embedded Debugger) over USB | EDBG (CMSIS-DAP / DGI) |
| Included Extension Boards | I/O1 Xplained Pro, OLED1 Xplained Pro, PROTO1 Xplained Pro | — |
| Included Cables | 2x USB cables | — |
| Supported IDEs | Microchip Studio, Atmel Studio, GCC ARM toolchain | — |
| Software Framework | Atmel Software Framework (ASF) / Harmony | — |
| RoHS 状态 | Compliant | — |
| Board Type | — | Evaluation / Development Platform |
| Series | — | SAM G (Xplained Pro) |
| Target MCU | — | ATSAMG53N19A-AU |
| Core Processor | — | ARM Cortex-M4 with FPU |
| Operating Frequency | — | 48 MHz |
| Program Memory | — | 512 KB Flash |
| Core Width | — | 32-Bit |
| USB Interfaces | — | 1x USB-A host, 1x USB-B device |
| Storage | — | 1x microSD card socket |
| Expansion | — | Arduino R3 compatible header, 2x mikroBUS click sockets |
| User I/O | — | 4 LEDs, 2 mechanical buttons, 1 reset button |
| 工作电源电压 | — | 5 V (USB powered) |
| 工作温度 | — | 0C to +70C (commercial evaluation use) |
| Compliance | — | RoHS, FCC, IC, CE |
| Mounting | — | Bench / desk (no enclosure) |
| Packaging | — | Anti-static bag with quick-start guide |