ATSAM4S-XSTK vs ATSAMHA1G16A-XPRO 对比
详细并排对比 ATSAM4S-XSTK 出自 Microchip Technology 和 ATSAMHA1G16A-XPRO 出自 Microchip Technology。对比关键规格、电气参数、封装、生命周期状态、价格和供货情况，以确定最适合您设计需求的元器件。
Microchip Technology
ATSAM4S-XSTK - SAM4S Xplained Pro ARM Cortex-M4 Starter Kit | Microchip
ATSAM4S-XSTK ✓ 量产中Microchip Technology
ATSAMHA1G16A-XPRO - SAM HA1G16A Xplained Pro MCU Eval Kit | Microchip
ATSAMHA1G16A-XPRO ✓ 量产中规格对比
| 参数 | ATSAM4S-XSTK | ATSAMHA1G16A-XPRO |
|---|---|---|
| 品牌 | Microchip Technology | Microchip Technology |
| 分类 | Development Boards | Development Boards |
| 生命周期状态 | 有效 | 有效 |
| 库存状态 | 有库存 | 有库存 |
| 单价（USD） | $159.80 | $73.40 |
| Product Type | Starter Kit (Evaluation Kit + Extension Boards) | Xplained Pro Evaluation Kit |
| On-board MCU | ATSAM4SD32C | — |
| Core | ARM Cortex-M4 with FPU and DSP extensions | — |
| Maximum CPU Frequency | 120 MHz | — |
| Flash Memory | 2048 KB (2 MB) | — |
| SRAM | 160 KB | — |
| Low-frequency Crystal | 32.768 kHz (0.032768 MHz) | — |
| Operating Voltage Range (MCU) | 1.62 V to 3.6 V | — |
| USB | USB 2.0 Full-Speed Device/Host with on-chip PHY | — |
| ADC | 12-bit, up to 8 channels (per SAM4S family) | — |
| Communication Peripherals | USART x3, UART x2, TWI (I2C) x2, SPI x2, I2S x2, HS USB | — |
| External Bus Interface | Yes (EBI), plus 16-bit SMC (Static Memory Controller) | — |
| On-board Debugger | EDBG (Embedded Debugger) over USB | EDBG (AT32UC3A3256-based) |
| Included Extension Boards | I/O1 Xplained Pro, OLED1 Xplained Pro, PROTO1 Xplained Pro | — |
| Included Cables | 2x USB cables | — |
| Supported IDEs | Microchip Studio, Atmel Studio, GCC ARM toolchain | Microchip Studio (Atmel Studio), MPLAB X IDE, ASF / Harmony |
| Software Framework | Atmel Software Framework (ASF) / Harmony | — |
| RoHS 状态 | Compliant | Compliant |
| Target MCU | — | ATSAMHA1G16A (SAM HA1G16A SiP) |
| Core Architecture | — | ARM Cortex-M0+ 32-bit |
| Target MCU Family | — | SAM HA1 (SiP, System-in-Package) |
| Debug Interface | — | Cortex-M0+ SWD via EDBG |
| Power Supply | — | USB-powered (EDBG USB) |
| Host Interface | — | USB Micro-B (EDBG) |
| Extension Headers | — | Xplained Pro EXT1/EXT2/EXT3; Arduino Uno R3-compatible |
| User I/O | — | LEDs, user buttons, reset button |
| Bootloader | — | Mass-storage drag-and-drop (target MCU) |
| Supported Extensions | — | I/O1 Xplained Pro, OLED1 Xplained Pro, QT2/QT4 Xplained Pro, PROTO1 Xplained Pro |
| Form Factor | — | Xplained Pro evaluation board |
| 安装类型 | — | Desktop / Bench (Arduino-shield-compatible) |