ATSAML10D14A-MF vs ATSAML10E15A-AFT 对比
详细并排对比 ATSAML10D14A-MF 出自 Microchip Technology 和 ATSAML10E15A-AFT 出自 Microchip Technology。对比关键规格、电气参数、封装、生命周期状态、价格和供货情况，以确定最适合您设计需求的元器件。
Microchip Technology
ATSAML10D14A-MF - 32MHz Cortex-M23 MCU 16KB Flash | Microchip
ATSAML10D14A-MF ✓ 量产中Microchip Technology
ATSAML10E15A-AFT - 32KB Flash Cortex-M23 MCU | Microchip
ATSAML10E15A-AFT ✓ 量产中规格对比
| 参数 | ATSAML10D14A-MF | ATSAML10E15A-AFT |
|---|---|---|
| 品牌 | Microchip Technology | Microchip Technology |
| 分类 | Microcontrollers | Microcontrollers |
| 生命周期状态 | 有效 | 有效 |
| 库存状态 | 有库存 | 有库存 |
| 单价（USD） | $2.18 | $1.20 |
| Core Architecture | ARM Cortex-M23 (Armv8-M baseline) | ARM Cortex-M23 (ARMv8-M baseline) |
| 最大时钟频率 | 32 MHz | — |
| Program Memory (Flash) | 16 KB (16K x 8) | — |
| SRAM | 4 KB | 8 KB |
| Operating Voltage Range | 1.62 V to 3.63 V | — |
| Active Mode Current | < 25 uA/MHz | — |
| Sleep Mode Current | < 100 nA | — |
| 封装 | 24-VQFN (4x4 mm) with exposed pad | 32-pin TQFP (7x7 mm) |
| 工作温度范围 | -40 C to +125 C | — |
| I/O Pins | 17 (approx.) | — |
| ADC | 12-bit, up to 5 channels | 12-bit |
| DAC | 10-bit, 1 channel | 10-bit |
| Analog Comparators | Yes | — |
| Operational Amplifiers | Yes (integrated) | Yes (integrated) |
| Touch Controller | Peripheral Touch Controller (PTC) | — |
| Serial Communication | SERCOM (configurable as I2C/SPI/UART) | — |
| Smart Card Interface | ISO7816 | — |
| TrustZone-M | Not present (SAM L11 adds TrustZone) | — |
| 安装类型 | Surface Mount | Surface Mount |
| RoHS 状态 | Compliant | Compliant |
| CPU Bit Width | — | 32-bit |
| Maximum CPU Speed | — | 32 MHz |
| Flash Memory | — | 32 KB (32K x 8) |
| Active Current | — | < 25 uA/MHz |
| Sleep Current | — | < 100 nA |
| 工作温度 | — | -40C to +125C (AEC-Q100 Grade 1) |
| ISO 7816 Smart Card Interface | — | Yes |
| Peripheral Touch Controller (PTC) | — | Yes (enhanced) |
| SERCOM Serial Interfaces | — | Yes (configurable) |
| TrustZone-M Support | — | Yes |
| Event System | — | Yes (configurable, CPU-independent) |
| Supply Voltage Range | — | [DATA_NEEDED: VDD range] |