CC113LRGPR vs CC110LRGPT 对比
详细并排对比 CC113LRGPR 出自 Texas Instruments 和 CC110LRGPT 出自 Texas Instruments。对比关键规格、电气参数、封装、生命周期状态、价格和供货情况，以确定最适合您设计需求的元器件。
规格对比
| 参数 | CC113LRGPR | CC110LRGPT |
|---|---|---|
| 品牌 | Texas Instruments | Texas Instruments |
| 分类 | RF Transceivers | RF Transceivers |
| 生命周期状态 | 有效 | 有效 |
| 库存状态 | 有库存 | 有库存 |
| 单价（USD） | $0.36 | $0.84 |
| Product Type | Sub-1 GHz RF Receiver (Value Line) | Sub-1 GHz RF Transceiver |
| Frequency Bands | 315 MHz, 433 MHz, 868 MHz, 915 MHz | 300-348 MHz, 387-464 MHz, 779-928 MHz |
| Frequency Range | 300-348 MHz, 387-464 MHz, 779-928 MHz | — |
| Modulation | FSK, GFSK, OOK | — |
| Receiver Sensitivity | -116 dBm | [DATA_NEEDED: receiver sensitivity at 1.2 kbps] |
| Maximum Data Rate | 600 kbps | — |
| Receive Current | 17.1 mA | — |
| Data Interface | PCB, serial configuration interface | — |
| 封装 | 20-QFN (4x4 mm) with exposed pad | 20-pin VQFN (RGP) with exposed pad |
| 安装类型 | Surface Mount | Surface Mount |
| Applications | General Purpose | — |
| Product Status | Active | — |
| Packaging Option | Cut Tape (CT) & Digi-Reel | — |
| 电源电压 | [DATA_NEEDED: supply voltage range] | 2.0 V to 3.6 V (2.5 V / 3.3 V typical operation) |
| 工作温度 | [DATA_NEEDED: operating temperature range] | [DATA_NEEDED: operating temperature range] |
| RoHS 状态 | [DATA_NEEDED: RoHS status] | Compliant |
| Modulation Formats | — | FSK, GFSK, OOK |
| Family | — | SimpleLink Value Line (CC110L, CC1101-compatible RF performance) |
| 接口 | — | SPI (SI, SO, SCLK, CSN) with GDO0/GDO1/GDO2 digital outputs |
| Baseband Modem | — | Highly configurable, with packet handling, data buffering, burst mode, CCA |
| Receiver Type | — | Low-IF with RSSI and AFC |
| Bidirectional Link | — | Yes (two CC110L devices form a low-cost RF link) |
| Antenna | — | Single-ended RF_P/RF_N with external balun/matching network |
| Maximum Output Power | — | [DATA_NEEDED: maximum programmable TX power in dBm] |
| Data Rate Range | — | [DATA_NEEDED: programmable data rate range in kbps] |
| Quiescent Current (RX) | — | [DATA_NEEDED: RX current consumption in mA] |