INA2128U vs INA2128UG4 对比
详细并排对比 INA2128U 出自 Texas Instruments 和 INA2128UG4 出自 Texas Instruments。对比关键规格、电气参数、封装、生命周期状态、价格和供货情况,以确定最适合您设计需求的元器件。
规格对比
| 参数 | INA2128U | INA2128UG4 |
|---|---|---|
| 品牌 | Texas Instruments | Texas Instruments |
| 分类 | Amplifier ICs | Amplifier ICs |
| 生命周期状态 | 有效 | 有效 |
| Amplifier Type | Dual instrumentation amplifier | — |
| Architecture | Three-op-amp instrumentation-amplifier design | Three-op-amp design |
| Number of Channels | 2 channels | — |
| Gain Range | 1 to 10,000 | 1 to 10,000 |
| Gain Setting Method | 1 external resistor | 1 external resistor |
| Bandwidth at Gain 100 | 200 kHz | 200 kHz |
| Input Circuitry | Current-feedback | Current feedback |
| Input Configuration | Single-ended and differential | — |
| Power Supply | ±18 V maximum total supply | — |
| Low Offset Voltage | 2 uV typical | — |
| 封装 | 16-pin SOIC | 16-pin SOIC |
| 安装类型 | Surface mount | Surface mount |
| 工作温度范围 | [DATA_NEEDED: operating temperature range] | -40°C to +85°C |
| Input Common-Mode Range | [DATA_NEEDED: input common-mode voltage range] | — |
| Quiescent Current per Channel | [DATA_NEEDED: quiescent current per channel] | — |
| 电源电流 | [DATA_NEEDED: total supply current] | — |
| Offset Drift | [DATA_NEEDED: input offset voltage drift] | — |
| Slew Rate | [DATA_NEEDED: slew rate] | — |
| Output Voltage Swing | [DATA_NEEDED: output voltage swing] | — |
| Gain Bandwidth Product | [DATA_NEEDED: gain bandwidth product] | — |
| Minimum Specified Supply Voltage | [DATA_NEEDED: minimum supply voltage] | — |
| RoHS 状态 | Compliant | [DATA_NEEDED: RoHS status] |
| REACH Status | [DATA_NEEDED: REACH status] | [DATA_NEEDED: REACH status] |
| MSL | Level 3, 260 C, 168 hours | — |
| Product Type | — | Dual instrumentation amplifier |
| Number of Amplifier Channels | — | 2 channels |
| 电源电压 | — | [DATA_NEEDED: supply voltage range] |
| Supply Current per Channel | — | [DATA_NEEDED: typical and maximum supply current] |
| Input Offset Voltage | — | [DATA_NEEDED: input offset voltage] |
| Gain Error | — | [DATA_NEEDED: gain error] |
| Common-Mode Rejection | — | [DATA_NEEDED: common-mode rejection ratio] |