ISL83072EIUZA vs MAX3076EESD+T 对比
详细并排对比 ISL83072EIUZA 出自 Renesas Electronics 和 MAX3076EESD+T 出自 Analog Devices。对比关键规格、电气参数、封装、生命周期状态、价格和供货情况，以确定最适合您设计需求的元器件。
Renesas Electronics
ISL83072EIUZA - 3.3V RS-485/RS-422 Transceiver, 8-MSOP | Renesas
ISL83072EIUZA ✓ 量产中
规格对比
| 参数 | ISL83072EIUZA | MAX3076EESD+T |
|---|---|---|
| 品牌 | Renesas Electronics | Analog Devices |
| 分类 | Interface ICs | Interface ICs |
| 生命周期状态 | 有效 | 有效 |
| 库存状态 | 有库存 | 有库存 |
| 单价（USD） | $1.45 | $0.00 |
| 功能 | Transceiver | — |
| Protocol | RS-422, RS-485 | — |
| Number of Drivers/Receivers | 1/1 | — |
| Duplex | Half | — |
| 数据速率 | 500 kbps (slew-rate limited, per family) | — |
| 电源电压 | 3.0 V to 3.6 V (single 3.3V supply) | — |
| Bus ESD Protection (HBM) | ±15 kV (RS-485 bus pins) | — |
| Other-Pin ESD (HBM) | >7 kV | — |
| Unit Load | 1/8 unit load (up to 256 nodes) | — |
| Receiver Fail-Safe | Full fail-safe (open, short, terminated, floating) | — |
| Hot Plug Tolerant | Yes (Tx/Rx remain three-state during power-up on versions with enable pins) | — |
| 工作温度 | -40 °C to +85 °C (industrial) | [DATA_NEEDED: operating temperature range] |
| 封装 | 8-MSOP | 14-pin narrow SOIC, 3.90 mm width |
| 安装类型 | Surface Mount | Surface mount |
| RoHS 状态 | Compliant | unknown |
| Product Type | — | RS-485/RS-422 transceiver |
| Supply Voltage Range | — | 2.97 V to 3.63 V |
| Maximum Data Rate | — | 16 Mbps |
| Driver Count | — | 1 |
| Receiver Count | — | 1 |
| ESD Protection | — | ±15 kV |
| Fail-Safe Receiver | — | Yes; logic-high output when receiver inputs are open or shorted |
| Hot-Swap Support | — | Yes |
| Interface Standards | — | RS-485 and RS-422 |
| Propagation Delay | — | [DATA_NEEDED: driver and receiver propagation delay] |
| Receiver Differential Threshold | — | [DATA_NEEDED: receiver differential threshold] |
| Common-Mode Rejection | — | [DATA_NEEDED: common-mode rejection] |
| Driver Output Protection | — | [DATA_NEEDED: driver output protection details] |
| 电源电流 | — | [DATA_NEEDED: operating supply current] |
| AEC-Q100 Qualification | — | not_applicable |