ISO1430DWR vs ISO1450BDWR 对比
详细并排对比 ISO1430DWR 出自 Texas Instruments 和 ISO1450BDWR 出自 Texas Instruments。对比关键规格、电气参数、封装、生命周期状态、价格和供货情况，以确定最适合您设计需求的元器件。
Texas Instruments
ISO1450BDWR - 50Mbps 5kVrms Isolated RS-485/RS-422 Transceiver | Texas Instruments
ISO1450BDWR ✓ 量产中规格对比
| 参数 | ISO1430DWR | ISO1450BDWR |
|---|---|---|
| 品牌 | Texas Instruments | Texas Instruments |
| 分类 | Interface ICs | Interface ICs |
| 生命周期状态 | 有效 | 有效 |
| Product Type | Galvanically isolated half-duplex RS-485 and RS-422 transceiver | — |
| Maximum Data Rate | 12 Mbps | — |
| Isolation Rating | 5 kVrms | — |
| Transceiver Configuration | 1 transmitter and 1 receiver | — |
| Duplex Mode | Half-duplex | — |
| EMC Protection | Protected against ESD and EFT bus events | — |
| Interface Standards | TIA/EIA RS-485 and RS-422 | — |
| 工作温度范围 | -40°C to +125°C | — |
| 封装 | 16-pin SOIC (DW) | SOIC-16 wide-body (DW), 16 pins |
| 安装类型 | Surface mount | Surface Mount |
| Logic Supply Voltage | [DATA_NEEDED: logic-side supply voltage] | — |
| Bus-side Supply Voltage | [DATA_NEEDED: bus-side supply voltage] | — |
| Propagation Delay | [DATA_NEEDED: propagation delay] | — |
| Receiver Sensitivity | [DATA_NEEDED: receiver sensitivity] | — |
| Common-Mode Transient Immunity | [DATA_NEEDED: common-mode transient immunity] | — |
| ESD Protection Rating | [DATA_NEEDED: ESD protection rating] | — |
| EFT Protection Rating | [DATA_NEEDED: EFT protection rating] | — |
| Isolation Capacitance | [DATA_NEEDED: isolation capacitance] | — |
| Lead Finish | [DATA_NEEDED: lead finish] | — |
| RoHS 状态 | [DATA_NEEDED: RoHS status] | Compliant |
| REACH Status | [DATA_NEEDED: REACH status] | — |
| 功能 | — | Isolated half-duplex RS-485 / RS-422 transceiver |
| Data Rate (max) | — | 50 Mbps |
| Isolation Voltage (rms) | — | 5 kVrms (reinforced) |
| Number of Drivers / Receivers | — | 1/1 |
| Duplex | — | Half |
| Receiver Hysteresis | — | [DATA_NEEDED: receiver hysteresis voltage] |
| Supply Voltage VCC1 (logic side) | — | 3 V to 5.5 V |
| Supply Voltage VCC2 (bus side) | — | Internally generated by isolated DC-DC |
| Bus Pin ESD (IEC 61000-4-2) | — | ±16 kV (air / contact, per datasheet) |
| Bus Pin ESD (HBM) | — | ±4 kV |
| IEC 61000-4-4 EFT Immunity | — | ±4 kV |
| Surge Immunity | — | [DATA_NEEDED: IEC 61000-4-5 surge rating] |
| Unit Load | — | 1/8 (up to 256 nodes on bus) |
| Common-Mode Range | — | Wide common-mode bus voltage range (per datasheet) |
| 热关断 | — | Yes |
| Current Limiting | — | Yes |
| Low-Power Standby | — | Yes |
| 工作温度 | — | -40C to +125C |
| MSL 等级 | — | 3 (per JEDEC J-STD-020) |
| Compliance Standards | — | TIA/EIA-485-A, TIA/EIA-422, IEC 61000-4-2, IEC 61000-4-4 |