LM224KAN vs LM224KN 对比
详细并排对比 LM224KAN 出自 Texas Instruments 和 LM224KN 出自 Texas Instruments。对比关键规格、电气参数、封装、生命周期状态、价格和供货情况，以确定最适合您设计需求的元器件。
规格对比
| 参数 | LM224KAN | LM224KN |
|---|---|---|
| 品牌 | Texas Instruments | Texas Instruments |
| 分类 | Amplifier ICs | Amplifier ICs |
| 生命周期状态 | 有效 | 有效 |
| Product Type | Quad operational amplifier | — |
| Number of Amplifiers | 4 | 4 |
| Amplifier Configuration | Standard general-purpose amplifier | — |
| Supply Type | Single supply or split supply | — |
| Input Bias Current | 20 nA | [DATA_NEEDED: input bias current specification] |
| Input Offset Voltage | ±1.5 mV | 600 uV typical |
| Voltage Gain | 70 dB | — |
| 静态电流 | 0.3 µA per channel | — |
| Supply Voltage Range | 3 V to 32 V | — |
| 输出电压范围 | ±1.5 V to 16 V | — |
| Output Current Per Channel | 60 mA | — |
| Common-Mode Rejection Ratio | 70 dB | — |
| 工作温度范围 | -25 °C to 85 °C | [DATA_NEEDED: operating temperature range] |
| 封装 | 14-pin PDIP, 0.300 in, 7.62 mm pitch | 14-pin DIP (0.300 in, 7.62 mm) |
| 引脚数 | 14 | — |
| ESD Protection | 2 kV | 2 kV |
| RoHS 状态 | unknown | — |
| REACH Status | unknown | — |
| Lead-Free Status | unknown | — |
| Number of Circuits | — | 4 circuits |
| Amplifier Type | — | General-purpose operational amplifier |
| Gain-Bandwidth Product | — | 1.2 MHz |
| Single Supply Voltage Range | — | 3 V to 32 V |
| Supply Current Drain | — | 0.8 mA typical |
| Common-Mode Input Voltage Range | — | Includes ground |
| Differential Input Voltage | — | High differential input voltage capability; exact limit [DATA_NEEDED: differential input voltage limit] |
| Temperature Grade | — | Industrial grade |
| 安装类型 | — | Through-hole |
| Lead Pitch | — | 7.62 mm (0.300 in) |
| Supply Configuration | — | Single supply or split supply |
| Output Current | — | [DATA_NEEDED: output current specification] |
| Slew Rate | — | [DATA_NEEDED: slew rate specification] |
| Open-Loop Gain | — | [DATA_NEEDED: open-loop gain specification] |
| RoHS Compliance | — | unknown |
| Automotive Qualification | — | Not qualified; AEC-Q100 status [DATA_NEEDED: AEC-Q100 qualification status] |