LM2901N vs LM2901NG 对比
详细并排对比 LM2901N 出自 Texas Instruments 和 LM2901NG 出自 onsemi。对比关键规格、电气参数、封装、生命周期状态、价格和供货情况,以确定最适合您设计需求的元器件。
规格对比
| 参数 | LM2901N | LM2901NG |
|---|---|---|
| 品牌 | Texas Instruments | onsemi |
| 分类 | Amplifier ICs | Amplifier ICs |
| 生命周期状态 | 有效 | 有效 |
| Comparator Type | Quad differential comparator | Quad differential comparator |
| Number of Channels | 4 channels | 4 channels |
| Supply Configuration | Single or split supply | Single supply |
| Maximum Supply Voltage | 36 V | — |
| Input Bias Current | 25 nA typical | [DATA_NEEDED: input bias current] |
| Input Offset Current | ±5.0 nA typical | — |
| Supply Current Drain | 800 µA typical | — |
| 输出类型 | Open collector | Open collector |
| Logic Compatibility | TTL, DTL, MOS, ECL, and CMOS output compatibility | TTL and CMOS |
| 封装 | 14-pin DIP | — |
| 安装类型 | Through hole | Through-hole |
| 工作温度 | -40 °C to +85 °C | — |
| Input Common-Mode Range | [DATA_NEEDED: input common-mode voltage range] | — |
| Input Offset Voltage | [DATA_NEEDED: input offset voltage] | [DATA_NEEDED: input offset voltage] |
| Output Saturation Voltage | [DATA_NEEDED: output saturation voltage] | 130 mV at 4 mA |
| Response Time | [DATA_NEEDED: comparator response time] | — |
| Output Sink Current | [DATA_NEEDED: output sink current] | — |
| RoHS 状态 | unknown | [DATA_NEEDED: RoHS status] |
| REACH Status | unknown | [DATA_NEEDED: REACH status] |
| AEC-Q100 Qualification | not_applicable | [DATA_NEEDED: AEC-Q100 qualification] |
| Supply Voltage Range | — | 3 V to 36 V |
| Common-Mode Input Range | — | Includes ground |
| 工作温度范围 | — | -40°C to 105°C |
| Input ESD Protection | — | ESD clamps on inputs |
| Package Type | — | 14-pin PDIP |
| Manufacturer | — | onsemi |
| Device Classification | — | Standard general-purpose comparator |
| Typical Applications | — | Level detection, low-level sensing, and memory applications |
| 电源电流 | — | [DATA_NEEDED: supply current] |
| Propagation Delay | — | [DATA_NEEDED: propagation delay] |
| Differential Input Voltage | — | [DATA_NEEDED: differential input voltage] |