LM2903DR vs LM2903AVQDRG4 对比
详细并排对比 LM2903DR 出自 Texas Instruments 和 LM2903AVQDRG4 出自 Texas Instruments。对比关键规格、电气参数、封装、生命周期状态、价格和供货情况,以确定最适合您设计需求的元器件。
Texas Instruments
LM2903DR - Dual Open-Collector Comparator | Texas Instruments (Tape & Reel)
LM2903DR ✓ 量产中规格对比
| 参数 | LM2903DR | LM2903AVQDRG4 |
|---|---|---|
| 品牌 | Texas Instruments | Texas Instruments |
| 分类 | Amplifier ICs | Amplifier ICs |
| 生命周期状态 | 有效 | 有效 |
| Comparator Type | Dual differential comparator | Dual differential comparator |
| Number of Channels | 2 channels | 2 channels |
| Supply Voltage Range | 2 V to 36 V | 2 V to 36 V |
| 输出类型 | Open-collector | Open-collector |
| Response Time | 300 ns | 0.3 µs |
| 封装 | 8-pin SOIC | 8-SOIC, 0.154 in width and 3.90 mm width |
| 安装类型 | Surface mount | Surface mount |
| 工作温度范围 | -40 °C to +125 °C | [DATA_NEEDED: operating temperature range] |
| Supply Configuration | Single supply or split supply | — |
| Channel Independence | Two independent comparator channels | — |
| Output Logic Style | Open-collector, pull-up resistor required | — |
| Common-Mode Range | [DATA_NEEDED: input common-mode voltage range] | — |
| Input Offset Voltage | [DATA_NEEDED: input offset voltage] | 2 mV typical |
| Input Bias Current | [DATA_NEEDED: input bias current] | [DATA_NEEDED: input bias current] |
| Output Sink Current | [DATA_NEEDED: output sink current] | — |
| 静态电流 | [DATA_NEEDED: supply current per channel] | — |
| Propagation Delay | 300 ns response time | — |
| Output High Voltage | [DATA_NEEDED: output high-level voltage with pull-up] | — |
| RoHS 状态 | [DATA_NEEDED: RoHS status] | [DATA_NEEDED: RoHS status] |
| Automotive Qualification | [DATA_NEEDED: AEC-Q100 qualification status] | AEC-Q100 automotive catalog variant |
| Dual-Supply Operating Range | — | ±1 V to ±18 V |
| Output Current | — | [DATA_NEEDED: output current] |
| Input Common-Mode Range | — | [DATA_NEEDED: input common-mode range] |
| 电源电流 | — | [DATA_NEEDED: supply current] |
| REACH Status | — | [DATA_NEEDED: REACH status] |
| Lead-Free Status | — | [DATA_NEEDED: lead-free status] |