MAX3232ESE+ vs SP3232ECN-L 对比
详细并排对比 MAX3232ESE+ 出自 Analog Devices 和 SP3232ECN-L 出自 MaxLinear。对比关键规格、电气参数、封装、生命周期状态、价格和供货情况，以确定最适合您设计需求的元器件。
规格对比
| 参数 | MAX3232ESE+ | SP3232ECN-L |
|---|---|---|
| 品牌 | Analog Devices | MaxLinear |
| 分类 | Interface ICs | Interface ICs |
| 生命周期状态 | 有效 | 有效 |
| Device Type | RS-232 transceiver | — |
| Transmitter Channels | 2 | — |
| Receiver Channels | 2 | — |
| Supply Voltage Range | 3.0 V to 5.5 V | — |
| Maximum Data Rate | Up to 1 Mbps | 120 kbps |
| Interface Standard | RS-232 | — |
| Logic Compatibility | [DATA_NEEDED: logic compatibility details] | TTL-compatible transceiver |
| Package Type | 16-pin SOIC | — |
| 安装类型 | Surface Mount | Surface Mount |
| 引脚数 | 16 pins | — |
| Transmitter Output Type | [DATA_NEEDED: transmitter output voltage and slew details] | — |
| Receiver Input Type | [DATA_NEEDED: receiver input threshold details] | — |
| Charge Pump | [DATA_NEEDED: charge-pump architecture and capacitor requirements] | — |
| Propagation Delay | [DATA_NEEDED: propagation delay] | — |
| 工作温度 | 0 C to 70 C | — |
| ESD Protection | [DATA_NEEDED: ESD protection rating] | — |
| RoHS 状态 | [DATA_NEEDED: RoHS status] | RoHS compliant |
| REACH Status | [DATA_NEEDED: REACH status] | — |
| AEC-Q100 Qualification | not_applicable | — |
| Product Type | — | RS-232 transceiver |
| Number of Drivers | — | 2 |
| Number of Receivers | — | 2 |
| Channel Configuration | — | 2 transmit and 2 receive |
| Single Supply Voltage Range | — | 3 V to 5.5 V |
| Charge-Pump Capacitor Requirement | — | 0.1 uF in 3.3 V operation |
| ESD Protection, IEC 61000-4-2 | — | plus or minus 15 kV |
| ESD Protection, Human Body Model | — | plus or minus 15 kV |
| 工作温度范围 | — | 0 C to 70 C |
| 封装 | — | 16-pin narrow SOIC |
| RS-232 Standard | — | EIA/TIA-232 |
| Charge-Pump Architecture | — | High-efficiency internal charge pump |
| Automatic Driver Shutdown | — | [DATA_NEEDED: automatic driver shutdown behavior] |
| Maximum Driver Output Voltage | — | [DATA_NEEDED: maximum driver output voltage] |
| Receiver Input Resistance | — | [DATA_NEEDED: receiver input resistance] |