MAX339CPE+ vs MAX338CPE+ 对比
详细并排对比 MAX339CPE+ 出自 Analog Devices 和 MAX338CPE+ 出自 Analog Devices。对比关键规格、电气参数、封装、生命周期状态、价格和供货情况,以确定最适合您设计需求的元器件。
规格对比
| 参数 | MAX339CPE+ | MAX338CPE+ |
|---|---|---|
| 品牌 | Analog Devices | Analog Devices |
| 分类 | Interface ICs | Interface ICs |
| 生命周期状态 | 有效 | 有效 |
| Multiplexer Configuration | Dual 4:1 | — |
| Number of Circuits | 2 circuits | 1 circuit |
| Input Channels per Circuit | 4 channels | — |
| Maximum On-Resistance | 400 ohms | — |
| Single-Supply Voltage Range | 4.5 V to 30 V | 4.5 V to 30 V |
| Dual-Supply Voltage Range | +/-4.5 V to +/-20 V | ±4.5 V to ±20 V |
| 封装 | 16-pin PDIP | 16-pin PDIP |
| Addressing | 2-bit binary addressing per 4:1 section | — |
| Switch Type | CMOS analog multiplexer | — |
| Operating Mode | Mux or demux | — |
| Maximum On-Time | 500 ns | — |
| Maximum Off-Time | 500 ns | — |
| Minimum Operating Temperature | 0 C | — |
| Maximum Operating Temperature | [DATA_NEEDED: maximum operating temperature] | — |
| Leakage Current | [DATA_NEEDED: leakage current] | — |
| Charge Injection | [DATA_NEEDED: charge injection] | [DATA_NEEDED: charge injection] |
| Channel-to-Channel Off Isolation | [DATA_NEEDED: off isolation] | — |
| 电源电流 | [DATA_NEEDED: supply current] | — |
| RoHS 状态 | [DATA_NEEDED: RoHS status] | [DATA_NEEDED: RoHS status] |
| REACH Status | [DATA_NEEDED: REACH status] | [DATA_NEEDED: REACH status] |
| AEC-Q100 Qualification | [DATA_NEEDED: AEC-Q100 qualification] | — |
| Product Type | — | 8:1 single-ended CMOS analog multiplexer |
| Number of Channels | — | 8 analog input channels |
| On-Resistance | — | 400 ohm per DigiKey listing; 650 ohm per chipdig listing |
| Supply Topology | — | Single supply or dual supply |
| Technology | — | CMOS |
| Signal Type | — | Single-ended analog |
| Leakage Characteristic | — | Low-leakage |
| 安装类型 | — | Through hole |
| Industry-Standard Reference | — | Pin-compatible upgrade for DG508A and DG509A |
| 工作温度范围 | — | [DATA_NEEDED: operating temperature range] |
| Channel Selection Control Levels | — | [DATA_NEEDED: address and enable control logic levels] |
| Maximum Switching Voltage | — | [DATA_NEEDED: maximum switching voltage] |
| Maximum Switched Current | — | [DATA_NEEDED: maximum switched current] |
| Off-Isolation | — | [DATA_NEEDED: off isolation] |