MAX485EEPA+ vs MAX485ECPA+ 对比
详细并排对比 MAX485EEPA+ 出自 Maxim Integrated 和 MAX485ECPA+ 出自 Maxim Integrated。对比关键规格、电气参数、封装、生命周期状态、价格和供货情况，以确定最适合您设计需求的元器件。
Maxim Integrated
MAX485ECPA+ - 1 Mbps RS-485/RS-422 Half-Duplex Transceiver | Maxim
MAX485ECPA+ ✓ 量产中规格对比
| 参数 | MAX485EEPA+ | MAX485ECPA+ |
|---|---|---|
| 品牌 | Maxim Integrated | Maxim Integrated |
| 分类 | Interface ICs | Interface ICs |
| 生命周期状态 | 有效 | 有效 |
| Transceiver Configuration | 1 transmitter and 1 receiver | 1 driver / 1 receiver, half-duplex |
| Communication Standards | RS-422 and RS-485 | — |
| Operating Mode | Half-duplex | — |
| Supply Voltage Range | 4.75 V to 5.25 V | — |
| ESD Protection | 15 kV | +/-15 kV on driver outputs and receiver inputs |
| Power Class | Low-power | — |
| Driver Slew Rate | Slew-rate-limited | — |
| Logic Input | 1 data input | — |
| Logic Output | 1 data output | — |
| Differential Bus Inputs | 2 differential inputs: A and B | — |
| Package Type | 8-pin PDIP | — |
| 安装类型 | Through-hole | Through Hole |
| 工作温度范围 | [DATA_NEEDED: operating temperature range] | — |
| Maximum Data Rate | [DATA_NEEDED: maximum data rate] | 1 Mbps (slew-rate-limited driver) |
| Driver Output Current | [DATA_NEEDED: driver output current] | [DATA_NEEDED: output current (standard / high-impedance load)] |
| Receiver Input Resistance | [DATA_NEEDED: receiver input resistance] | — |
| Quiescent Supply Current | [DATA_NEEDED: quiescent supply current] | — |
| RoHS Compliance | [DATA_NEEDED: RoHS compliance status] | — |
| REACH Compliance | [DATA_NEEDED: REACH compliance status] | — |
| Interface Standard | — | RS-485 / RS-422 differential |
| 电源电压 | — | 5 V nominal (4.5 V to 5.5 V) |
| Driver Output Type | — | Differential, limited slew rate |
| 封装 | — | PDIP-8 (8-pin plastic DIP, through-hole) |
| 工作温度 | — | Commercial grade (C suffix) - [DATA_NEEDED: full operating temperature range] |
| Quiescent (Supply) Current | — | [DATA_NEEDED: quiescent current] |
| Receiver Common-Mode Range | — | [DATA_NEEDED: receiver common-mode voltage range] |
| Receiver Input Sensitivity | — | [DATA_NEEDED: receiver differential threshold] |
| Driver Output Differential Voltage | — | [DATA_NEEDED: differential output voltage] |
| Enable Pins | — | DE (driver enable) and /RE (receiver enable, active-low), separate pins |
| Short-Circuit Protection | — | Yes, driver outputs are short-circuit current limited |
| 热关断 | — | Yes, protects against excessive power dissipation |
| Quiescent Current Shutdown Pin | — | Not present on this device |
| RoHS 状态 | — | Compliant (Maxim lead-free suffix '+') |
| Qualification | — | Industrial temperature option available in family - [DATA_NEEDED: AEC-Q100 status] |