NTE922 vs LM111-LM211 对比
详细并排对比 NTE922 出自 NI 和 LM111-LM211 出自 Texas Instruments。对比关键规格、电气参数、封装、生命周期状态、价格和供货情况，以确定最适合您设计需求的元器件。
Texas Instruments
LM111-LM211 - High-Speed Differential Comparator | Texas Instruments
LM111-LM211 Unknown规格对比
| 参数 | NTE922 | LM111-LM211 |
|---|---|---|
| 品牌 | NI | Texas Instruments |
| 分类 | Logic ICs | Amplifier ICs |
| 生命周期状态 | 停产 | Unknown |
| Product Type | Integrated-circuit voltage comparator | Single differential voltage comparator |
| Input Current Advantage | Nearly 1000 times lower than NTE910 or NTE910D | — |
| Supported Supply Concept | From single 5 V logic supply through standard plus-or-minus 15 V supplies | — |
| Package Variant | NTE922: 8-pin metal can | — |
| Family Package Variants | NTE922 metal can; NTE922M Mini DIP; NTE922SM SOIC | — |
| 引脚数量 | 8 pins | — |
| Output Architecture | [DATA_NEEDED: output architecture] | — |
| 电源电压 | [DATA_NEEDED: exact supply-voltage limits] | — |
| Input Offset Voltage | [DATA_NEEDED: input offset voltage] | [DATA_NEEDED: input offset voltage for selected variant] |
| Input Bias Current | [DATA_NEEDED: input bias current] | — |
| Input Offset Current | [DATA_NEEDED: input offset current] | — |
| Input Common-Mode Range | [DATA_NEEDED: input common-mode range] | [DATA_NEEDED: input common-mode voltage range for selected package and variant] |
| Differential Input Range | [DATA_NEEDED: differential input range] | — |
| Response Time | [DATA_NEEDED: response time] | — |
| 工作温度范围 | [DATA_NEEDED: operating temperature range] | — |
| 安装方式 | Through-hole metal-can package | — |
| RoHS 状态 | unknown | unknown |
| REACH Status | unknown | unknown |
| Comparator Family | — | LM111, LM211, LM311 |
| Supply Compatibility | — | ±15 V and single +5 V supplies |
| Input Configuration | — | Differential |
| Input Current | — | Low input current; exact maximum value depends on selected variant |
| 输出类型 | — | Open-collector |
| Logic Compatibility | — | Compatible with most TTL and MOS circuits |
| LM111-N Operating Temperature | — | −55°C to +125°C |
| LM211-N Operating Temperature | — | −25°C to +85°C |
| LM311-N Operating Temperature | — | 0°C to +70°C |
| LM111-N Pin Configuration | — | Same as LM106 and LM710, according to TI product information |
| Typical Applications | — | Precision squaring and peak detection |
| Comparator Function | — | Compares two input voltages and provides a logic output |
| Propagation Delay | — | [DATA_NEEDED: propagation delay for selected variant and test conditions] |
| Output Pull-Up Requirement | — | [DATA_NEEDED: recommended pull-up resistor and pull-up voltage] |
| 封装 | — | [DATA_NEEDED: selected orderable package for LM111-LM211 family] |
| 安装类型 | — | [DATA_NEEDED: selected orderable package mounting type] |
| AEC-Q100 Qualification | — | unknown |