RNBD350PE-I100 vs RNBD350UE-I100 对比
详细并排对比 RNBD350PE-I100 出自 Microchip Technology 和 RNBD350UE-I100 出自 Microchip Technology。对比关键规格、电气参数、封装、生命周期状态、价格和供货情况，以确定最适合您设计需求的元器件。
Microchip Technology
RNBD350PE-I100 - BT 6.0 LE Module w/ PCB Antenna | Microchip
RNBD350PE-I100 ✓ 量产中Microchip Technology
RNBD350UE-I100 - BLE 5.2 U.FL Module | Microchip Technology
RNBD350UE-I100 ✓ 量产中规格对比
| 参数 | RNBD350PE-I100 | RNBD350UE-I100 |
|---|---|---|
| 品牌 | Microchip Technology | Microchip Technology |
| 分类 | RF Modules | RF Modules |
| 生命周期状态 | 有效 | 有效 |
| 库存状态 | 有库存 | 有库存 |
| 单价（USD） | $5.84 | $7.40 |
| Protocol | Bluetooth v6.0 Low Energy (BLE 5.2 core) | — |
| Module Type | Transceiver Module (pre-certified) | — |
| Operating Frequency Band | 2.4 GHz ISM (2402 - 2480 MHz) | — |
| Antenna | Integrated PCB Trace (no external antenna required) | — |
| Host Interface | Two-Wire or Four-Wire UART (Flow Control) | UART (Two-Wire or Four-Wire with flow control) |
| Command Set | Microchip ASCII command protocol | Microchip ASCII command set |
| 电源电压 | 3.3 V typical (single rail) | — |
| 封装 | LGA-30 (13.4 x 18.7 mm) Surface Mount | 30-pin SMD with shield can, 13.4 x 18.7 mm |
| 工作温度 | [-40C to +85C (industrial)] | [DATA_NEEDED: operating temperature range] |
| Base SoC | Microchip PIC32CX-BZ3 | — |
| Pre-Certifications | FCC (US), ISED (CA), CE (EU), NCC (TW), SRRC (CN), MIC (JP), KC (KR) | — |
| BLE Features | Data Length Extension (DLE), LE Secure Connections | — |
| 安装类型 | Surface Mount | Surface Mount |
| RoHS 状态 | Compliant | Compliant (per JLCPCB listing) |
| MSL 等级 | [DATA_NEEDED: MSL moisture sensitivity level] | — |
| Product Type | — | Bluetooth Low Energy Transceiver Module |
| Bluetooth Version | — | Bluetooth 5.2 Low Energy |
| Frequency Band | — | 2.4 GHz |
| Antenna Type | — | U.FL connector (antenna not included) |
| Supply Voltage Range | — | 1.9 V to 3.6 V |
| Core SoC | — | Microchip PIC32CX-BZ3 BLE SoC |
| Maximum PHY Data Rate | — | 2 Mbps |
| Data Length Extension (DLE) | — | Supported |
| LE Secure Connections | — | Supported (enabled by default) |
| Programming Required | — | No (plug-and-play) |
| Transmit Power | — | [DATA_NEEDED: transmit power] |
| Receiver Sensitivity | — | [DATA_NEEDED: receiver sensitivity] |
| Current Consumption | — | [DATA_NEEDED: current consumption] |