SN75176 vs MAX485ECPA+ 对比
详细并排对比 SN75176 出自 Texas Instruments 和 MAX485ECPA+ 出自 Maxim Integrated。对比关键规格、电气参数、封装、生命周期状态、价格和供货情况，以确定最适合您设计需求的元器件。
Texas Instruments
SN75176 - Differential Bus Transceiver RS-485/RS-422 | Texas Instruments
SN75176 ✓ 量产中Maxim Integrated
MAX485ECPA+ - 1 Mbps RS-485/RS-422 Half-Duplex Transceiver | Maxim
MAX485ECPA+ ✓ 量产中规格对比
| 参数 | SN75176 | MAX485ECPA+ |
|---|---|---|
| 品牌 | Texas Instruments | Maxim Integrated |
| 分类 | Interface ICs | Interface ICs |
| 生命周期状态 | 有效 | 有效 |
| 功能 | Transceiver | — |
| Protocol | RS-422, RS-485 | — |
| Number of Drivers/Receivers | 1/1 | — |
| Duplex | Half | — |
| Receiver Hysteresis | 50 mV (typical) | — |
| Supply Voltage (Vcc) | 4.75 V to 5.25 V | — |
| 工作温度 | 0 °C to +70 °C | Commercial grade (C suffix) - [DATA_NEEDED: full operating temperature range] |
| Driver Output Current | ±60 mA (max) | [DATA_NEEDED: output current (standard / high-impedance load)] |
| Common-Mode Input Range | -7 V to +12 V | — |
| Differential Input Threshold | ±200 mV | — |
| Quiescent Supply Current (enabled) | 30 mA (typical) | — |
| Shutdown Supply Current | 1 µA (typical) | — |
| 封装 | 8-pin PDIP (P) | PDIP-8 (8-pin plastic DIP, through-hole) |
| 安装类型 | Through-Hole | Through Hole |
| Standards Compliance | ANSI TIA/EIA-422-B, TIA/EIA-485-A, ITU V.11, ITU X.27 | — |
| RoHS 状态 | Compliant | Compliant (Maxim lead-free suffix '+') |
| Transceiver Configuration | — | 1 driver / 1 receiver, half-duplex |
| Interface Standard | — | RS-485 / RS-422 differential |
| 电源电压 | — | 5 V nominal (4.5 V to 5.5 V) |
| Maximum Data Rate | — | 1 Mbps (slew-rate-limited driver) |
| Driver Output Type | — | Differential, limited slew rate |
| ESD Protection | — | +/-15 kV on driver outputs and receiver inputs |
| Quiescent (Supply) Current | — | [DATA_NEEDED: quiescent current] |
| Receiver Common-Mode Range | — | [DATA_NEEDED: receiver common-mode voltage range] |
| Receiver Input Sensitivity | — | [DATA_NEEDED: receiver differential threshold] |
| Driver Output Differential Voltage | — | [DATA_NEEDED: differential output voltage] |
| Enable Pins | — | DE (driver enable) and /RE (receiver enable, active-low), separate pins |
| Short-Circuit Protection | — | Yes, driver outputs are short-circuit current limited |
| 热关断 | — | Yes, protects against excessive power dissipation |
| Quiescent Current Shutdown Pin | — | Not present on this device |
| Qualification | — | Industrial temperature option available in family - [DATA_NEEDED: AEC-Q100 status] |