SP485EEN-L vs SP485E 对比
详细并排对比 SP485EEN-L 出自 MaxLinear 和 SP485E 出自 MaxLinear。对比关键规格、电气参数、封装、生命周期状态、价格和供货情况，以确定最适合您设计需求的元器件。
MaxLinear
SP485E - Enhanced Low Power Half-Duplex RS-485/RS-422 Transceiver | MaxLinear
SP485E ✓ 量产中规格对比
| 参数 | SP485EEN-L | SP485E |
|---|---|---|
| 品牌 | MaxLinear | MaxLinear |
| 分类 | Interface ICs | Interface ICs |
| 生命周期状态 | 有效 | 有效 |
| Product Type | Half-duplex RS-422/RS-485 transceiver | — |
| Transmitter and Receiver Count | 1 transmitter and 1 receiver | — |
| 数据速率 | 10,000 kbps | 2.5 Mbps (max, SP485E non-slew-limited) |
| Alternate Family Data Rate | Up to 5 Mbps | — |
| 工作电源电压 | 4.75 V to 5.25 V | — |
| 工作温度范围 | -40 C to +85 C | [DATA_NEEDED: operating temperature] |
| 封装 | 8-pin SOIC | 8-pin NSOIC or PDIP |
| 安装类型 | Surface mount | Surface Mount (NSOIC) or Through-Hole (PDIP) |
| ESD Tolerance, Human Body Model | Greater than 15 kV | — |
| ESD Tolerance, Air Discharge Method | Greater than 15 kV under IEC1000-4-2 | — |
| Supported Protocols | RS-422 and RS-485 | — |
| Duplex Mode | Half-duplex | — |
| Power Classification | Low-power interface IC | — |
| EMI Characteristics | Enhanced low-EMI design | — |
| RoHS Compliance | [DATA_NEEDED: RoHS compliance] | — |
| REACH Compliance | [DATA_NEEDED: REACH compliance] | — |
| Automotive Qualification | [DATA_NEEDED: AEC-Q100 qualification] | — |
| 功能 | — | Transceiver |
| Protocol | — | RS-485, RS-422 |
| Number of Drivers/Receivers | — | 1/1 |
| Duplex | — | Half-duplex |
| Supply Voltage (VCC) | — | 4.75 V to 5.25 V |
| Receiver Input Sensitivity | — | ±200 mV |
| Receiver Input Impedance | — | 12 kΩ minimum, 15 kΩ typical |
| Common-Mode Range | — | −7 V to +12 V |
| ESD Protection (HBM) | — | ±15 kV |
| ESD Protection (IEC 61000-4-2 Air Discharge) | — | ±15 kV |
| Process Technology | — | BiCMOS |
| Failsafe Receiver | — | Yes (open, shorted, idle bus) |
| Tri-State Enable Pins | — | Yes (DE, RE) |
| RoHS 状态 | — | Compliant |