TCA6408PWR vs TCA9538PWR 对比
详细并排对比 TCA6408PWR 出自 Texas Instruments 和 TCA9538PWR 出自 Texas Instruments。对比关键规格、电气参数、封装、生命周期状态、价格和供货情况,以确定最适合您设计需求的元器件。
Texas Instruments
TCA6408PWR - 8-Bit I2C I/O Expander | Texas Instruments (Tape & Reel)
TCA6408PWR ✓ 量产中规格对比
| 参数 | TCA6408PWR | TCA9538PWR |
|---|---|---|
| 品牌 | Texas Instruments | Texas Instruments |
| 分类 | Interface ICs | Interface ICs |
| 生命周期状态 | 有效 | 有效 |
| Product Type | 8-bit I2C and SMBus I/O expander | 8-bit I2C/SMBus I/O expander |
| Number of I/O Ports | 8 bits | — |
| Serial Interface | I2C and SMBus | — |
| Maximum Serial Clock Frequency | 400 kHz | — |
| Operating Voltage Range | 1.65 V to 5.5 V | — |
| Port Configuration | 8 configurable bidirectional P-port I/O lines | — |
| Interrupt Function | Dedicated interrupt output | — |
| Reset Function | Dedicated reset input | — |
| Configuration Registers | Dedicated configuration registers | Yes |
| 封装 | 16-pin TSSOP | 16-pin TSSOP |
| Package Width | 4.40 mm | — |
| Package Lead Span | 0.173 inch | — |
| 安装类型 | [DATA_NEEDED: mounting type] | Surface mount |
| 工作温度范围 | [DATA_NEEDED: operating temperature range] | -40 °C to 125 °C |
| Output Current | [DATA_NEEDED: output current] | — |
| Standby or Quiescent Current | [DATA_NEEDED: standby or quiescent current] | — |
| RoHS Compliance | unknown | — |
| REACH Compliance | unknown | — |
| AEC-Q100 Qualification | unknown | [DATA_NEEDED: AEC-Q100 qualification status] |
| Number of I/O Lines | — | 8 lines |
| Supply Voltage Range | — | 1.65 V to 5.5 V |
| Maximum I2C Clock Frequency | — | 400 kHz |
| Supported I2C Modes | — | 100 kHz Standard-mode and 400 kHz Fast-mode |
| Interface Protocol | — | I2C and SMBus |
| Interrupt Output | — | Yes |
| Reset Register | — | Yes |
| Hardware Address Inputs | — | 2 address inputs |
| Maximum Devices per I2C Bus | — | 4 devices |
| RoHS 状态 | — | Compliant |
| Lead-Free Status | — | [DATA_NEEDED: lead-free status] |
| REACH Status | — | [DATA_NEEDED: REACH status] |
| 静态电流 | — | [DATA_NEEDED: quiescent current] |
| I/O Output Current | — | [DATA_NEEDED: per-pin output current] |