THVD1400DR vs MAX3078EESA+ 对比
详细并排对比 THVD1400DR 出自 Texas Instruments 和 MAX3078EESA+ 出自 Analog Devices。对比关键规格、电气参数、封装、生命周期状态、价格和供货情况，以确定最适合您设计需求的元器件。
Texas Instruments
THVD1400DR - 3.3-5V RS-485 Transceiver, 500Kbps, 8-SOIC | Texas Instruments
THVD1400DR ✓ 量产中规格对比
| 参数 | THVD1400DR | MAX3078EESA+ |
|---|---|---|
| 品牌 | Texas Instruments | Analog Devices |
| 分类 | Interface ICs | Interface ICs |
| 生命周期状态 | 有效 | 有效 |
| 库存状态 | 有库存 | 有库存 |
| 单价（USD） | $0.92 | $4.65 |
| 功能 | Transceiver | — |
| Protocol | RS-422, RS-485 | — |
| Number of Drivers/Receivers | 1/1 | — |
| Duplex | Half | — |
| Supply Voltage (VCC) | 3.0 V to 5.5 V | — |
| 数据速率 | 500 kbps (max) | — |
| Receiver Hysteresis | 50 mV (typ) | — |
| Bus Common-Mode Voltage | -7 V to +12 V | — |
| ESD Protection (Bus Pins, HBM) | ±16 kV | — |
| ESD Protection (Bus Pins, IEC 61000-4-2 Contact) | ±12 kV | — |
| Unit Load | 1/8 (256 nodes max) | — |
| 工作温度 | -40 °C to +125 °C | [DATA_NEEDED: operating temperature range] |
| 封装 | 8-pin SOIC (SOIC-8, D suffix) | 8-pin SOIC |
| 安装类型 | Surface Mount | Surface mount |
| RoHS 状态 | Compliant | [DATA_NEEDED: RoHS compliance status] |
| Lead-Free | Yes | — |
| Receiver Fail-Safe | Yes (open, short, idle bus) | — |
| Hot-Plug Support | Yes | — |
| 关断电流 | [DATA_NEEDED: shutdown current value] | — |
| Quiescent Current (typ) | [DATA_NEEDED: quiescent current value] | — |
| Product Type | — | RS-485/RS-422 transceiver |
| Supply Voltage Range | — | 2.97V to 3.63V |
| Driver Count | — | 1 |
| Receiver Count | — | 1 |
| Interface Standards | — | RS-485 and RS-422 |
| ESD Protection | — | ±15kV |
| Fail-Safe Receiver | — | Logic-high output when receiver inputs are open or shorted |
| Hot-Swap Capability | — | Supported |
| Unloaded Supply Current | — | 800µA |
| Supply Current With Drivers Disabled | — | 800µA when fully loaded |
| DigiKey Listing Package | — | 8-SOIC |
| Manufacturer Product Status | — | PRODUCTION |
| Manufacturer Data Sheet Revision | — | Rev. 5 |
| Common-Mode Rejection | — | [DATA_NEEDED: common-mode rejection ratio] |
| Differential Input Threshold | — | [DATA_NEEDED: differential input threshold] |
| Driver Output Current | — | [DATA_NEEDED: driver output current] |
| REACH Status | — | [DATA_NEEDED: REACH compliance status] |