TLV2761ID vs TLV2760CD 对比
详细并排对比 TLV2761ID 出自 Texas Instruments 和 TLV2760CD 出自 Texas Instruments。对比关键规格、电气参数、封装、生命周期状态、价格和供货情况,以确定最适合您设计需求的元器件。
Texas Instruments
TLV2760CD - 3.6V, 500kHz Micropower RRIO Op Amp with Shutdown | Texas Instruments
TLV2760CD ✓ 量产中规格对比
| 参数 | TLV2761ID | TLV2760CD |
|---|---|---|
| 品牌 | Texas Instruments | Texas Instruments |
| 分类 | Amplifier ICs | Amplifier ICs |
| 生命周期状态 | 有效 | 有效 |
| Amplifier Type | Single voltage-feedback operational amplifier | General Purpose Operational Amplifier, Rail-to-Rail Input/Output |
| Number of Circuits | 1 circuit | — |
| Supply Voltage Range | 1.8 V to 3.6 V recommended maximum | 1.8 V to 3.6 V |
| Maximum Recommended Supply Voltage | 3.6 V | 3.6 V |
| Minimum Operating Supply Voltage | 1.8 V | — |
| Gain-Bandwidth Product | 500 kHz | 500 kHz |
| Operating Current | 20 µA | — |
| Input Type | Rail-to-rail input | — |
| 输出类型 | Rail-to-rail output | — |
| Supply Type | Single supply | — |
| 工作温度范围 | -40°C to +85°C | 0 °C to 70 °C |
| 封装 | 8-pin SOIC (D) | 8-SOIC (0.154 in, 3.90 mm width) |
| 安装类型 | Surface mount | Surface Mount |
| Product Classification | Standard general-purpose amplifier | — |
| Battery Compatibility | Operation from 1.8 V, suitable for two AA or AAA cells | — |
| Input Overvoltage Operation | Operation from ±1.8 V supplies down to ±0.9 V | — |
| Family Description | 1.8 V micropower rail-to-rail input/output operational amplifier | — |
| RoHS 状态 | unknown | unknown |
| REACH Status | unknown | — |
| AEC-Q100 Qualification | not_applicable | — |
| Number of Channels | — | 1 |
| Quiescent Current (Typ) | — | 20 µA per amplifier |
| Input Offset Voltage (Typ) | — | 3.5 mV |
| Input Bias Current (Typ) | — | 3 pA |
| Input Common-Mode Range | — | Rail-to-rail (includes both supply rails) |
| Output Swing | — | Rail-to-rail |
| Shutdown Pin | — | Yes |
| Technology | — | CMOS |
| Supply Current with Shutdown | — | [DATA_NEEDED: shutdown supply current] |
| Slew Rate | — | [DATA_NEEDED: slew rate] |
| Input Offset Voltage Temperature Drift | — | [DATA_NEEDED: input offset voltage drift] |